Linux-2.6.33.2/drivers/usb/serial/pl2303.c
/*
* Prolific PL2303 USB to serial adaptor driver
*
* Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2003 IBM Corp.
*
* Original driver for 2.2.x by anonymous
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "pl2303.h"
/*
* Version Information
*/
#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
static int debug;
#define PL2303_CLOSING_WAIT (30*HZ)
#define PL2303_BUF_SIZE 1024
#define PL2303_TMP_BUF_SIZE 1024
struct pl2303_buf {
unsigned int buf_size;
char *buf_buf;
char *buf_get;
char *buf_put;
};
static struct usb_device_id id_table [] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
{ USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
{ USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_driver pl2303_driver = {
.name = "pl2303",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
.no_dynamic_id = 1,
.supports_autosuspend = 1,
};
#define SET_LINE_REQUEST_TYPE 0x21
#define SET_LINE_REQUEST 0x20
#define SET_CONTROL_REQUEST_TYPE 0x21
#define SET_CONTROL_REQUEST 0x22
#define CONTROL_DTR 0x01
#define CONTROL_RTS 0x02
#define BREAK_REQUEST_TYPE 0x21
#define BREAK_REQUEST 0x23
#define BREAK_ON 0xffff
#define BREAK_OFF 0x0000
#define GET_LINE_REQUEST_TYPE 0xa1
#define GET_LINE_REQUEST 0x21
#define VENDOR_WRITE_REQUEST_TYPE 0x40
#define VENDOR_WRITE_REQUEST 0x01
#define VENDOR_READ_REQUEST_TYPE 0xc0
#define VENDOR_READ_REQUEST 0x01
#define UART_STATE 0x08
#define UART_STATE_TRANSIENT_MASK 0x74
#define UART_DCD 0x01
#define UART_DSR 0x02
#define UART_BREAK_ERROR 0x04
#define UART_RING 0x08
#define UART_FRAME_ERROR 0x10
#define UART_PARITY_ERROR 0x20
#define UART_OVERRUN_ERROR 0x40
#define UART_CTS 0x80
enum pl2303_type {
type_0, /* don't know the difference between type 0 and */
type_1, /* type 1, until someone from prolific tells us... */
HX, /* HX version of the pl2303 chip */
};
struct pl2303_private {
spinlock_t lock;
struct pl2303_buf *buf;
int write_urb_in_use;
wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
enum pl2303_type type;
};
/*
* pl2303_buf_alloc
*
* Allocate a circular buffer and all associated memory.
*/
static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
{
struct pl2303_buf *pb;
if (size == 0)
return NULL;
pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
if (pb == NULL)
return NULL;
pb->buf_buf = kmalloc(size, GFP_KERNEL);
if (pb->buf_buf == NULL) {
kfree(pb);
return NULL;
}
pb->buf_size = size;
pb->buf_get = pb->buf_put = pb->buf_buf;
return pb;
}
/*
* pl2303_buf_free
*
* Free the buffer and all associated memory.
*/
static void pl2303_buf_free(struct pl2303_buf *pb)
{
if (pb) {
kfree(pb->buf_buf);
kfree(pb);
}
}
/*
* pl2303_buf_clear
*
* Clear out all data in the circular buffer.
*/
static void pl2303_buf_clear(struct pl2303_buf *pb)
{
if (pb != NULL)
pb->buf_get = pb->buf_put;
/* equivalent to a get of all data available */
}
/*
* pl2303_buf_data_avail
*
* Return the number of bytes of data available in the circular
* buffer.
*/
static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
{
if (pb == NULL)
return 0;
return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
}
/*
* pl2303_buf_space_avail
*
* Return the number of bytes of space available in the circular
* buffer.
*/
static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
{
if (pb == NULL)
return 0;
return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
}
/*
* pl2303_buf_put
*
* Copy data data from a user buffer and put it into the circular buffer.
* Restrict to the amount of space available.
*
* Return the number of bytes copied.
*/
static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
unsigned int count)
{
unsigned int len;
if (pb == NULL)
return 0;
len = pl2303_buf_space_avail(pb);
if (count > len)
count = len;
if (count == 0)
return 0;
len = pb->buf_buf + pb->buf_size - pb->buf_put;
if (count > len) {
memcpy(pb->buf_put, buf, len);
memcpy(pb->buf_buf, buf+len, count - len);
pb->buf_put = pb->buf_buf + count - len;
} else {
memcpy(pb->buf_put, buf, count);
if (count < len)
pb->buf_put += count;
else /* count == len */
pb->buf_put = pb->buf_buf;
}
return count;
}
/*
* pl2303_buf_get
*
* Get data from the circular buffer and copy to the given buffer.
* Restrict to the amount of data available.
*
* Return the number of bytes copied.
*/
static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
unsigned int count)
{
unsigned int len;
if (pb == NULL)
return 0;
len = pl2303_buf_data_avail(pb);
if (count > len)
count = len;
if (count == 0)
return 0;
len = pb->buf_buf + pb->buf_size - pb->buf_get;
if (count > len) {
memcpy(buf, pb->buf_get, len);
memcpy(buf+len, pb->buf_buf, count - len);
pb->buf_get = pb->buf_buf + count - len;
} else {
memcpy(buf, pb->buf_get, count);
if (count < len)
pb->buf_get += count;
else /* count == len */
pb->buf_get = pb->buf_buf;
}
return count;
}
static int pl2303_vendor_read(__u16 value, __u16 index,
struct usb_serial *serial, unsigned char *buf)
{
int res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
value, index, buf, 1, 100);
dbg("0x%x:0x%x:0x%x:0x%x %d - %x", VENDOR_READ_REQUEST_TYPE,
VENDOR_READ_REQUEST, value, index, res, buf[0]);
return res;
}
static int pl2303_vendor_write(__u16 value, __u16 index,
struct usb_serial *serial)
{
int res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
value, index, NULL, 0, 100);
dbg("0x%x:0x%x:0x%x:0x%x %d", VENDOR_WRITE_REQUEST_TYPE,
VENDOR_WRITE_REQUEST, value, index, res);
return res;
}
static int pl2303_startup(struct usb_serial *serial)
{
struct pl2303_private *priv;
enum pl2303_type type = type_0;
unsigned char *buf;
int i;
buf = kmalloc(10, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
if (serial->dev->descriptor.bDeviceClass == 0x02)
type = type_0;
else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
type = HX;
else if (serial->dev->descriptor.bDeviceClass == 0x00)
type = type_1;
else if (serial->dev->descriptor.bDeviceClass == 0xFF)
type = type_1;
dbg("device type: %d", type);
for (i = 0; i < serial->num_ports; ++i) {
priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL);
if (!priv)
goto cleanup;
spin_lock_init(&priv->lock);
priv->buf = pl2303_buf_alloc(PL2303_BUF_SIZE);
if (priv->buf == NULL) {
kfree(priv);
goto cleanup;
}
init_waitqueue_head(&priv->delta_msr_wait);
priv->type = type;
usb_set_serial_port_data(serial->port[i], priv);
}
pl2303_vendor_read(0x8484, 0, serial, buf);
pl2303_vendor_write(0x0404, 0, serial);
pl2303_vendor_read(0x8484, 0, serial, buf);
pl2303_vendor_read(0x8383, 0, serial, buf);
pl2303_vendor_read(0x8484, 0, serial, buf);
pl2303_vendor_write(0x0404, 1, serial);
pl2303_vendor_read(0x8484, 0, serial, buf);
pl2303_vendor_read(0x8383, 0, serial, buf);
pl2303_vendor_write(0, 1, serial);
pl2303_vendor_write(1, 0, serial);
if (type == HX)
pl2303_vendor_write(2, 0x44, serial);
else
pl2303_vendor_write(2, 0x24, serial);
kfree(buf);
return 0;
cleanup:
kfree(buf);
for (--i; i >= 0; --i) {
priv = usb_get_serial_port_data(serial->port[i]);
pl2303_buf_free(priv->buf);
kfree(priv);
usb_set_serial_port_data(serial->port[i], NULL);
}
return -ENOMEM;
}
static int set_control_lines(struct usb_device *dev, u8 value)
{
int retval;
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
value, 0, NULL, 0, 100);
dbg("%s - value = %d, retval = %d", __func__, value, retval);
return retval;
}
static void pl2303_send(struct usb_serial_port *port)
{
int count, result;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
if (priv->write_urb_in_use) {
spin_unlock_irqrestore(&priv->lock, flags);
return;
}
count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer,
port->bulk_out_size);
if (count == 0) {
spin_unlock_irqrestore(&priv->lock, flags);
return;
}
priv->write_urb_in_use = 1;
spin_unlock_irqrestore(&priv->lock, flags);
usb_serial_debug_data(debug, &port->dev, __func__, count,
port->write_urb->transfer_buffer);
port->write_urb->transfer_buffer_length = count;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s - failed submitting write urb,"
" error %d\n", __func__, result);
priv->write_urb_in_use = 0;
/* TODO: reschedule pl2303_send */
}
usb_serial_port_softint(port);
}
static int pl2303_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
dbg("%s - port %d, %d bytes", __func__, port->number, count);
if (!count)
return count;
spin_lock_irqsave(&priv->lock, flags);
count = pl2303_buf_put(priv->buf, buf, count);
spin_unlock_irqrestore(&priv->lock, flags);
pl2303_send(port);
return count;
}
static int pl2303_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
int room = 0;
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
room = pl2303_buf_space_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s - returns %d", __func__, room);
return room;
}
static int pl2303_chars_in_buffer(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
chars = pl2303_buf_data_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s - returns %d", __func__, chars);
return chars;
}
static void pl2303_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int cflag;
unsigned char *buf;
int baud;
int i;
u8 control;
const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
4800, 7200, 9600, 14400, 19200, 28800, 38400,
57600, 115200, 230400, 460800, 614400,
921600, 1228800, 2457600, 3000000, 6000000 };
int baud_floor, baud_ceil;
int k;
dbg("%s - port %d", __func__, port->number);
/* The PL2303 is reported to lose bytes if you change
serial settings even to the same values as before. Thus
we actually need to filter in this specific case */
if (!tty_termios_hw_change(tty->termios, old_termios))
return;
cflag = tty->termios->c_cflag;
buf = kzalloc(7, GFP_KERNEL);
if (!buf) {
dev_err(&port->dev, "%s - out of memory.\n", __func__);
/* Report back no change occurred */
*tty->termios = *old_termios;
return;
}
i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
case CS5:
buf[6] = 5;
break;
case CS6:
buf[6] = 6;
break;
case CS7:
buf[6] = 7;
break;
default:
case CS8:
buf[6] = 8;
break;
}
dbg("%s - data bits = %d", __func__, buf[6]);
}
/* For reference buf[0]:buf[3] baud rate value */
/* NOTE: Only the values defined in baud_sup are supported !
* => if unsupported values are set, the PL2303 seems to use
* 9600 baud (at least my PL2303X always does)
*/
baud = tty_get_baud_rate(tty);
dbg("%s - baud requested = %d", __func__, baud);
if (baud) {
/* Set baudrate to nearest supported value */
for (k=0; k<ARRAY_SIZE(baud_sup); k++) {
if (baud_sup[k] / baud) {
baud_ceil = baud_sup[k];
if (k==0) {
baud = baud_ceil;
} else {
baud_floor = baud_sup[k-1];
if ((baud_ceil % baud)
> (baud % baud_floor))
baud = baud_floor;
else
baud = baud_ceil;
}
break;
}
}
if (baud > 1228800) {
/* type_0, type_1 only support up to 1228800 baud */
if (priv->type != HX)
baud = 1228800;
else if (baud > 6000000)
baud = 6000000;
}
dbg("%s - baud set = %d", __func__, baud);
buf[0] = baud & 0xff;
buf[1] = (baud >> 8) & 0xff;
buf[2] = (baud >> 16) & 0xff;
buf[3] = (baud >> 24) & 0xff;
}
/* For reference buf[4]=0 is 1 stop bits */
/* For reference buf[4]=1 is 1.5 stop bits */
/* For reference buf[4]=2 is 2 stop bits */
if (cflag & CSTOPB) {
/* NOTE: Comply with "real" UARTs / RS232:
* use 1.5 instead of 2 stop bits with 5 data bits
*/
if ((cflag & CSIZE) == CS5) {
buf[4] = 1;
dbg("%s - stop bits = 1.5", __func__);
} else {
buf[4] = 2;
dbg("%s - stop bits = 2", __func__);
}
} else {
buf[4] = 0;
dbg("%s - stop bits = 1", __func__);
}
if (cflag & PARENB) {
/* For reference buf[5]=0 is none parity */
/* For reference buf[5]=1 is odd parity */
/* For reference buf[5]=2 is even parity */
/* For reference buf[5]=3 is mark parity */
/* For reference buf[5]=4 is space parity */
if (cflag & PARODD) {
if (cflag & CMSPAR) {
buf[5] = 3;
dbg("%s - parity = mark", __func__);
} else {
buf[5] = 1;
dbg("%s - parity = odd", __func__);
}
} else {
if (cflag & CMSPAR) {
buf[5] = 4;
dbg("%s - parity = space", __func__);
} else {
buf[5] = 2;
dbg("%s - parity = even", __func__);
}
}
} else {
buf[5] = 0;
dbg("%s - parity = none", __func__);
}
i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
dbg("0x21:0x20:0:0 %d", i);
/* change control lines if we are switching to or from B0 */
spin_lock_irqsave(&priv->lock, flags);
control = priv->line_control;
if ((cflag & CBAUD) == B0)
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
else
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
if (control != priv->line_control) {
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
set_control_lines(serial->dev, control);
} else {
spin_unlock_irqrestore(&priv->lock, flags);
}
buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0;
i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
if (cflag & CRTSCTS) {
if (priv->type == HX)
pl2303_vendor_write(0x0, 0x61, serial);
else
pl2303_vendor_write(0x0, 0x41, serial);
} else {
pl2303_vendor_write(0x0, 0x0, serial);
}
/* Save resulting baud rate */
if (baud)
tty_encode_baud_rate(tty, baud, baud);
kfree(buf);
}
static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
spin_lock_irqsave(&priv->lock, flags);
/* Change DTR and RTS */
if (on)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
else
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
set_control_lines(port->serial->dev, control);
}
static void pl2303_close(struct usb_serial_port *port)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
/* clear out any remaining data in the buffer */
pl2303_buf_clear(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
/* shutdown our urbs */
dbg("%s - shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
}
static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
int result;
dbg("%s - port %d", __func__, port->number);
if (priv->type != HX) {
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
} else {
/* reset upstream data pipes */
pl2303_vendor_write(8, 0, serial);
pl2303_vendor_write(9, 0, serial);
}
/* Setup termios */
if (tty)
pl2303_set_termios(tty, port, &tmp_termios);
dbg("%s - submitting read urb", __func__);
port->read_urb->dev = serial->dev;
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
" error %d\n", __func__, result);
pl2303_close(port);
return -EPROTO;
}
dbg("%s - submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
" error %d\n", __func__, result);
pl2303_close(port);
return -EPROTO;
}
port->port.drain_delay = 256;
return 0;
}
static int pl2303_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
spin_lock_irqsave(&priv->lock, flags);
if (set & TIOCM_RTS)
priv->line_control |= CONTROL_RTS;
if (set & TIOCM_DTR)
priv->line_control |= CONTROL_DTR;
if (clear & TIOCM_RTS)
priv->line_control &= ~CONTROL_RTS;
if (clear & TIOCM_DTR)
priv->line_control &= ~CONTROL_DTR;
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
return set_control_lines(port->serial->dev, control);
}
static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int mcr;
unsigned int status;
unsigned int result;
dbg("%s (%d)", __func__, port->number);
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
spin_lock_irqsave(&priv->lock, flags);
mcr = priv->line_control;
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0)
| ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0)
| ((status & UART_CTS) ? TIOCM_CTS : 0)
| ((status & UART_DSR) ? TIOCM_DSR : 0)
| ((status & UART_RING) ? TIOCM_RI : 0)
| ((status & UART_DCD) ? TIOCM_CD : 0);
dbg("%s - result = %x", __func__, result);
return result;
}
static int pl2303_carrier_raised(struct usb_serial_port *port)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
if (priv->line_status & UART_DCD)
return 1;
return 0;
}
static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int prevstatus;
unsigned int status;
unsigned int changed;
spin_lock_irqsave(&priv->lock, flags);
prevstatus = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
interruptible_sleep_on(&priv->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
changed = prevstatus ^ status;
if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
((arg & TIOCM_CD) && (changed & UART_DCD)) ||
((arg & TIOCM_CTS) && (changed & UART_CTS))) {
return 0;
}
prevstatus = status;
}
/* NOTREACHED */
return 0;
}
static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
switch (cmd) {
case TIOCMIWAIT:
dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
return wait_modem_info(port, arg);
default:
dbg("%s not supported = 0x%04x", __func__, cmd);
break;
}
return -ENOIOCTLCMD;
}
static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
u16 state;
int result;
dbg("%s - port %d", __func__, port->number);
if (break_state == 0)
state = BREAK_OFF;
else
state = BREAK_ON;
dbg("%s - turning break %s", __func__,
state == BREAK_OFF ? "off" : "on");
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
if (result)
dbg("%s - error sending break = %d", __func__, result);
}
static void pl2303_release(struct usb_serial *serial)
{
int i;
struct pl2303_private *priv;
dbg("%s", __func__);
for (i = 0; i < serial->num_ports; ++i) {
priv = usb_get_serial_port_data(serial->port[i]);
if (priv) {
pl2303_buf_free(priv->buf);
kfree(priv);
}
}
}
static void pl2303_update_line_status(struct usb_serial_port *port,
unsigned char *data,
unsigned int actual_length)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 status_idx = UART_STATE;
u8 length = UART_STATE + 1;
u16 idv, idp;
idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
idp = le16_to_cpu(port->serial->dev->descriptor.idProduct);
if (idv == SIEMENS_VENDOR_ID) {
if (idp == SIEMENS_PRODUCT_ID_X65 ||
idp == SIEMENS_PRODUCT_ID_SX1 ||
idp == SIEMENS_PRODUCT_ID_X75) {
length = 1;
status_idx = 0;
}
}
if (actual_length < length)
return;
/* Save off the uart status for others to look at */
spin_lock_irqsave(&priv->lock, flags);
priv->line_status = data[status_idx];
spin_unlock_irqrestore(&priv->lock, flags);
if (priv->line_status & UART_BREAK_ERROR)
usb_serial_handle_break(port);
wake_up_interruptible(&priv->delta_msr_wait);
}
static void pl2303_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
unsigned int actual_length = urb->actual_length;
int status = urb->status;
int retval;
dbg("%s (%d)", __func__, port->number);
switch (status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d", __func__,
status);
return;
default:
dbg("%s - nonzero urb status received: %d", __func__,
status);
goto exit;
}
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
pl2303_update_line_status(port, data, actual_length);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&urb->dev->dev,
"%s - usb_submit_urb failed with result %d\n",
__func__, retval);
}
static void pl2303_push_data(struct tty_struct *tty,
struct usb_serial_port *port, struct urb *urb,
u8 line_status)
{
unsigned char *data = urb->transfer_buffer;
/* get tty_flag from status */
char tty_flag = TTY_NORMAL;
/* break takes precedence over parity, */
/* which takes precedence over framing errors */
if (line_status & UART_BREAK_ERROR)
tty_flag = TTY_BREAK;
else if (line_status & UART_PARITY_ERROR)
tty_flag = TTY_PARITY;
else if (line_status & UART_FRAME_ERROR)
tty_flag = TTY_FRAME;
dbg("%s - tty_flag = %d", __func__, tty_flag);
tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
if (line_status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
if (tty_flag == TTY_NORMAL && !(port->console && port->sysrq))
tty_insert_flip_string(tty, data, urb->actual_length);
else {
int i;
for (i = 0; i < urb->actual_length; ++i)
if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
tty_insert_flip_char(tty, data[i], tty_flag);
}
tty_flip_buffer_push(tty);
}
static void pl2303_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
unsigned long flags;
int result;
int status = urb->status;
u8 line_status;
dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - urb status = %d", __func__, status);
if (!port->port.count) {
dbg("%s - port is closed, exiting.", __func__);
return;
}
if (status == -EPROTO) {
/* PL2303 mysteriously fails with -EPROTO reschedule
* the read */
dbg("%s - caught -EPROTO, resubmitting the urb",
__func__);
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - failed"
" resubmitting read urb, error %d\n",
__func__, result);
return;
}
dbg("%s - unable to handle the error, exiting.", __func__);
return;
}
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
spin_lock_irqsave(&priv->lock, flags);
line_status = priv->line_status;
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
wake_up_interruptible(&priv->delta_msr_wait);
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
pl2303_push_data(tty, port, urb, line_status);
}
tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
if (port->port.count) {
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - failed resubmitting"
" read urb, error %d\n", __func__, result);
}
return;
}
static void pl2303_write_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
int result;
int status = urb->status;
dbg("%s - port %d", __func__, port->number);
switch (status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d", __func__,
status);
priv->write_urb_in_use = 0;
return;
default:
/* error in the urb, so we have to resubmit it */
dbg("%s - Overflow in write", __func__);
dbg("%s - nonzero write bulk status received: %d", __func__,
status);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - failed resubmitting write"
" urb, error %d\n", __func__, result);
else
return;
}
priv->write_urb_in_use = 0;
/* send any buffered data */
pl2303_send(port);
}
/* All of the device info needed for the PL2303 SIO serial converter */
static struct usb_serial_driver pl2303_device = {
.driver = {
.owner = THIS_MODULE,
.name = "pl2303",
},
.id_table = id_table,
.usb_driver = &pl2303_driver,
.num_ports = 1,
.open = pl2303_open,
.close = pl2303_close,
.dtr_rts = pl2303_dtr_rts,
.carrier_raised = pl2303_carrier_raised,
.write = pl2303_write,
.ioctl = pl2303_ioctl,
.break_ctl = pl2303_break_ctl,
.set_termios = pl2303_set_termios,
.tiocmget = pl2303_tiocmget,
.tiocmset = pl2303_tiocmset,
.read_bulk_callback = pl2303_read_bulk_callback,
.read_int_callback = pl2303_read_int_callback,
.write_bulk_callback = pl2303_write_bulk_callback,
.write_room = pl2303_write_room,
.chars_in_buffer = pl2303_chars_in_buffer,
.attach = pl2303_startup,
.release = pl2303_release,
};
static int __init pl2303_init(void)
{
int retval;
retval = usb_serial_register(&pl2303_device);
if (retval)
goto failed_usb_serial_register;
retval = usb_register(&pl2303_driver);
if (retval)
goto failed_usb_register;
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&pl2303_device);
failed_usb_serial_register:
return retval;
}
static void __exit pl2303_exit(void)
{
usb_deregister(&pl2303_driver);
usb_serial_deregister(&pl2303_device);
}
module_init(pl2303_init);
module_exit(pl2303_exit);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");