Minix1.5/commands/kermit/ckcmai.c
char *versio = "C-Kermit, 4E(070) 29 Jan 88";
/* C K C M A I -- C-Kermit Main program */
/*
4E, add long packet support, plus changes for Apollo and Data General
support from SAS Institute, and for Macintosh from Planning Research Corp,
plus several important bug fixes.
*/
/*
Author: Frank da Cruz,
Columbia University Center for Computing Activities (CUCCA), 1984-88.
Copyright (C) 1984, 1988, Trustees of Columbia University in the City of New
York. Permission is granted to any individual or institution to use, copy, or
redistribute this software so long as it is not sold for profit, provided this
copyright notice is retained.
*/
/*
The Kermit file transfer protocol was developed at Columbia University.
It is named after Kermit the Frog, star of the television series THE
MUPPET SHOW; the name is used by permission of Henson Associates, Inc.
"Kermit" is also Celtic for "free".
*/
/*
Thanks to Herm Fischer of Encino CA for extensive contributions to version 4,
and to the following people for their contributions over the years:
Larry Afrin, Clemson U
Stan Barber, Rice U
Charles Brooks, EDN
Bill Catchings, formerly of CUCCA
Bob Cattani, Columbia U CS Dept
Howard Chu, U of Michigan
Bill Coalson, McDonnell Douglas
Alan Crosswell, CUCCA
Jeff Damens, formerly of CUCCA
Joe R. Doupnik, Utah State U
Glenn Everhart, RCA Labs
Carl Fongheiser, CWRU
Yekta Gursel, MIT
Jim Guyton, Rand Corp
Stan Hanks, Rice U.
Ken Harrenstein, SRI
Ron Heiby, Motorola Micromputer Division
Steve Hemminger, Tektronix
Randy Huntziger, NLM
Phil Julian, SAS Institute
Jim Knutson, U of Texas at Austin
John Kunze, UC Berkeley
David Lawyer, UC Irvine
S.O. Lidie, Lehigh U
Chris Maio, Columbia U CS Dept
Leslie Mikesall, American Farm Bureau
Martin Minow, DEC
Tony Movshon, NYU
Dan Murphy, ???
Jim Noble, Planning Research Corporation
Paul Placeway, Ohio State U
Ken Poulton, HP Labs
Frank Prindle, NADC
Scott Ribe, ???
Jack Rouse, SAS Institute
Stew Rubenstein, Harvard
Dan Schullman, DEC
Gordon Scott, Micro Focus, Newbury UK
David Sizeland, U of London Medical School
Bradley Smith, UCLA
Markku Toijala, Helsinki U of Technology
Dave Tweten, AMES-NAS
Walter Underwood, Ford Aerospace
Pieter Van Der Linden, Centre Mondial (Paris)
Wayne Van Pelt, GE/CRD
Mark Vasoll & Gregg Wonderly, Oklahoma State University
Stephen Walton, Ametek Computer
Lauren Weinstein
Joachim Wiesel, U of Karlsruhe
Dave Woolley, CAP Communication Systems, London
and many others.
*/
#include "ckcsym.h" /* Macintosh needs this */
#include "ckcker.h"
#include "ckcdeb.h"
/* Text message definitions.. each should be 256 chars long, or less. */
#ifdef MAC
char *hlptxt = "\r\
MacKermit Server Commands:\r\
\r\
BYE\r\
FINISH\r\
GET filespec\r\
REMOTE CWD directory\r\
REMOTE HELP\r\
SEND filespec\r\
\r\0";
#else
#ifdef AMIGA
char *hlptxt = "C-Kermit Server Commands:\n\
\n\
GET filespec, SEND filespec, FINISH, BYE, REMOTE HELP\n\
\n\0";
#else
#ifdef MINIX
char *hlptxt = "C-Kermit Server REMOTE Commands:\n\
BYE CWD DELETE DIRECTORY FINISH GET HELP HOST SEND SPACE TYPE WHO\n\
\n\0";
#else /* MINIX */
char *hlptxt = "C-Kermit Server REMOTE Commands:\n\
\n\
GET files REMOTE CWD [dir] REMOTE DIRECTORY [files]\n\
SEND files REMOTE SPACE [dir] REMOTE HOST command\n\
FINISH REMOTE DELETE files REMOTE WHO [user]\n\
BYE REMOTE HELP REMOTE TYPE files\n\
\n\0";
#endif
#endif
#endif
#ifdef MINIX
char *srvtxt = "\r\n\
C-Kermit server starting.\n\
\r\n\0";
#else
char *srvtxt = "\r\n\
C-Kermit server starting. Return to your local machine by typing\r\n\
its escape sequence for closing the connection, and issue further\r\n\
commands from there. To shut down the C-Kermit server, issue the\r\n\
FINISH or BYE command and then reconnect.\n\
\r\n\0";
#endif
/* Declarations for Send-Init Parameters */
int spsiz = DSPSIZ, /* Biggest packet size we can send */
spsizf = 0, /* Flag to override what you ask for */
rpsiz = DRPSIZ, /* Biggest we want to receive */
urpsiz = DRPSIZ, /* User-requested rpsiz */
maxrps = MAXRP, /* Maximum incoming long packet size */
maxsps = MAXSP, /* Maximum outbound l.p. size */
maxtry = MAXTRY, /* Maximum retries per packet */
wsize = 1, /* Window size */
timint = DMYTIM, /* Timeout interval I use */
rtimo = URTIME, /* Timeout I want you to use */
timef = 0, /* Flag to override what you ask */
npad = MYPADN, /* How much padding to send */
mypadn = MYPADN, /* How much padding to ask for */
bctr = 1, /* Block check type requested */
bctu = 1, /* Block check type used */
ebq = MYEBQ, /* 8th bit prefix */
ebqflg = 0, /* 8th-bit quoting flag */
rqf = -1, /* Flag used in 8bq negotiation */
rq = 0, /* Received 8bq bid */
sq = 'Y', /* Sent 8bq bid */
rpt = 0, /* Repeat count */
rptq = MYRPTQ, /* Repeat prefix */
rptflg = 0; /* Repeat processing flag */
int capas = 10, /* Position of Capabilities */
atcapb = 8, /* Attribute capability */
atcapr = 0, /* requested */
atcapu = 0, /* used */
swcapb = 4, /* Sliding Window capability */
swcapr = 0, /* requested */
swcapu = 0, /* used */
lpcapb = 2, /* Long Packet capability */
lpcapr = 1, /* requested */
lpcapu = 0; /* used */
CHAR padch = MYPADC, /* Padding character to send */
mypadc = MYPADC, /* Padding character to ask for */
seol = MYEOL, /* End-Of-Line character to send */
eol = MYEOL, /* End-Of-Line character to look for */
ctlq = CTLQ, /* Control prefix in incoming data */
myctlq = CTLQ; /* Outbound control character prefix */
/* Packet-related variables */
int pktnum = 0, /* Current packet number */
prvpkt = -1, /* Previous packet number */
sndtyp, /* Type of packet just sent */
rsn, /* Received packet sequence number */
rln, /* Received packet length */
size, /* Current size of output pkt data */
osize, /* Previous output packet data size */
maxsize, /* Max size for building data field */
spktl = 0; /* Length packet being sent */
CHAR sndpkt[MAXSP+100], /* Entire packet being sent */
recpkt[MAXRP+200], /* Packet most recently received */
*rdatap, /* Pointer to received packet data */
data[MAXSP+4], /* Packet data buffer */
srvcmd[MAXRP+4], /* Where to decode server command */
*srvptr, /* Pointer to above */
mystch = SOH, /* Outbound packet-start character */
stchr = SOH; /* Incoming packet-start character */
/* File-related variables */
#ifdef datageneral
CHAR filnam[256]; /* Name of current file. */
#else
CHAR filnam[50]; /* Name of current file. */
#endif
int nfils; /* Number of files in file group */
long fsize; /* Size of current file */
/* Communication line variables */
CHAR ttname[50]; /* Name of communication line. */
int parity, /* Parity specified, 0,'e','o',etc */
flow, /* Flow control, 1 = xon/xoff */
speed = -1, /* Line speed */
turn = 0, /* Line turnaround handshake flag */
turnch = XON, /* Line turnaround character */
duplex = 0, /* Duplex, full by default */
escape = 034, /* Escape character for connect */
delay = DDELAY, /* Initial delay before sending */
mdmtyp = 0; /* Modem type (initially none) */
int tlevel = -1; /* Take-file command level */
/* Statistics variables */
long filcnt, /* Number of files in transaction */
flci, /* Characters from line, current file */
flco, /* Chars to line, current file */
tlci, /* Chars from line in transaction */
tlco, /* Chars to line in transaction */
ffc, /* Chars to/from current file */
tfc; /* Chars to/from files in transaction */
int tsecs; /* Seconds for transaction */
/* Flags */
int deblog = 0, /* Flag for debug logging */
pktlog = 0, /* Flag for packet logging */
seslog = 0, /* Session logging */
tralog = 0, /* Transaction logging */
displa = 0, /* File transfer display on/off */
stdouf = 0, /* Flag for output to stdout */
xflg = 0, /* Flag for X instead of F packet */
hcflg = 0, /* Doing Host command */
fncnv = 1, /* Flag for file name conversion */
binary = 0, /* Flag for binary file */
savmod = 0, /* Saved file mode */
cmask = 0177, /* Connect byte mask */
fmask = 0377, /* File byte mask */
warn = 0, /* Flag for file warning */
quiet = 0, /* Be quiet during file transfer */
local = 0, /* Flag for external tty vs stdout */
server = 0, /* Flag for being a server */
cnflg = 0, /* Connect after transaction */
cxseen = 0, /* Flag for cancelling a file */
czseen = 0, /* Flag for cancelling file group */
keep = 0; /* Keep incomplete files */
/* Variables passed from command parser to protocol module */
char parser(); /* The parser itself */
char sstate = 0; /* Starting state for automaton */
char *cmarg = ""; /* Pointer to command data */
char *cmarg2 = ""; /* Pointer to 2nd command data */
char **cmlist; /* Pointer to file list in argv */
/* Miscellaneous */
char **xargv; /* Global copies of argv */
int xargc; /* and argc */
extern char *dftty; /* Default tty name from ckx???.c */
extern int dfloc; /* Default location: remote/local */
extern int dfprty; /* Default parity */
extern int dfflow; /* Default flow control */
/* M A I N -- C-Kermit main program */
#ifdef apollo
/* On the Apollo, intercept main to insert a cleanup handler */
ckcmai(argc,argv) int argc; char **argv; {
#else
main(argc,argv) int argc; char **argv; {
#endif
char *strcpy();
/* Do some initialization */
xargc = argc; /* Make global copies of argc */
xargv = argv; /* ...and argv. */
sstate = 0; /* No default start state. */
strcpy(ttname,dftty); /* Set up default tty name. */
local = dfloc; /* And whether it's local or remote. */
parity = dfprty; /* Set initial parity, */
flow = dfflow; /* and flow control. */
if (sysinit() < 0) doexit(BAD_EXIT); /* And system-dependent things. */
/*** attempt to take ini file before doing command line ***/
cmdini(); /* Sets tlevel */
while (tlevel > -1) { /* Execute init file. */
sstate = parser(); /* Loop getting commands. */
if (sstate) proto(); /* Enter protocol if requested. */
}
/* Look for a UNIX-style command line... */
if (argc > 1) { /* Command line arguments? */
sstate = cmdlin(); /* Yes, parse. */
if (sstate) {
proto(); /* Take any requested action, then */
if (!quiet) conoll(""); /* put cursor back at left margin, */
if (cnflg) conect(); /* connect if requested, */
doexit(GOOD_EXIT); /* and then exit with status 0. */
}
}
/* If no action requested on command line, enter interactive parser */
herald(); /* Display program herald. */
while(1) { /* Loop getting commands. */
sstate = parser();
if (sstate) proto(); /* Enter protocol if requested. */
}
}