Net2/usr/src/contrib/isode/others/quipu/tools/dsaconfig/quipu/wildlife.dsa

###############################################################################
# Level-1 DSA configuration file
###############################################################################


###############################################################################
# 1. Information about your DSA
###############################################################################

#
# define the name of your DSA under c=US, e.g.
#
#	dsa	"Spectacled Bear"
#
#
# if you have a specific IP address you want others to use when contacting your
# DSA, set this accordingly, e.g.,
#
#	ipaddr	130.117.128.3
#
# otherwise the first value in /etc/hosts will be used
#
# if you have a specific TCP port you want your DSA to reside at, set this
# accordingly, e.g.,
#
#	port	17003
#
# otherwise the port 17003 will be used
#

dsa		

ipaddr		
port		


###############################################################################
# 2. Information about your country
###############################################################################

#
# if your organization is not in the US, use the appropriate two-letter
# ISO 3166 code when defining the country, e.g.,
#
#	country		GB
#
# dsaconfig may not know about your country; if this is the case, then you can
# not run dsaconfig to configure your Level-1 DSA
#

country		


###############################################################################
# 3. Information about your organization
###############################################################################

#
# define the name of your organization, and its address and phone number, e.g.,
#
#	organization	"Performance Systems International"
#	domain		psi.com
#	street		"11800 Sunrise Valley Drive"
#	town		"Reston"
#	state		"Virginia"
#	zipcode		"22091"
#	telephone	"+1 703-620-6651"
#
# if you don't have a street address, define the post office box, e.g.,
#
#	pob		"1210"
#
# (it's okay to define both, but you must define at least one of them)
#
# if you have a fax machine, define its number, e.g.,
#
#	fax		"+1 703-620-4586"
#
# define the name of your organizational unit, e.g.,
#
#	unit		"Research Development"
#
#
# finally, describe your organization, e.g.,
#
#	description    "value-added provider of networking services"
#

organization	
domain		
street		
town		
state		
zipcode		
telephone	

pob		

fax		

unit		

description	


###############################################################################
# 4. Information about you
###############################################################################

#
# define your first and last name, e.g.,
#
#	firstname	"Wengyik"
#	lastname	"Yeong"
#
# if you have a middle name, define that, e.g.
#
#	middlename	"Terrible"
#
# your middle initial will be derived from this, but you might want to define
# it explicitly, e.g.,
#
#	middleinitial	"T"
#
# define your mailbox, job title, and password for your entry in the Directory,
# e.g.,
#
#	mailbox		"yeongw@psi.com"
#	title		"Staff Scientist"
#	password	"secret"
#
# if your phone number is different than your organizations, define your
# extension, this is either
#
#	extension	"x1234"
#
# or a full phone number, e.g.,
#
#	extension	"+1 415-961-3380"
#
# define your uid (from /etc/passwd), this will be used both for your entry
# and for the DSA's uid, e.g.,
#
#	userid		yeongw
#
# similarly, you can define a gid to be used for the DSA, e.g.,
#
#	groupid		whitepages
#
# if userid and groupid aren't supplied, they will be determined when
# dsaconfig runs
#

firstname	
lastname	

middlename	
middleinitial	

mailbox		
title		
password	

extension	

userid		
groupid