Net2/usr/src/share/doc/smm/01.setup/tahoe/tip.record

#>y.#>fr /boot
fsd(0,0)/etc

Boot
: dk(0,0)vdformat
50176+14336+776780 start 0x1000
VDFORMAT                   Version 3.0 

controller 0: smd
controller 1: smd-e

Type `Help' for help, `Start' to execute operations.

vdformat> help
  The following commands are available:
    KILL     - Abort all operations.
    STATus   - Display formatter state.
    RESET    - Reinitialize VDFORMAT, and start over.
    EXIT     - Terminate program.
    List     - List operations specified so far.
    Delete   - Delete specific operations.
    Format   - Format and verify disk surface.
    Verify   - Destructively verify disk surface.
    Relocate - Add known flaws to bad sector map.
    Correct  - Correct erroneous relocations or drive ID.
    Info     - Display known disk information.
    Profile  - Display seek profile graph of disk.
    Exercise - Perform seek exercises on disk.
    STARt    - Start operations.

vdformat> format
  Format on which controllers? 1
    Drives on controller 1? 0
      Number of patterns to use while verifying? 1
      Drive type for controller 1, drive 0? egl
        Module serial number for controller 1, drive 0? 1
vdformat> list
  The following operations will occur when Start is issued:
    Format: Controller 1, drive 0, type EGL.
vdformat> info
  Info on which controllers? 0
    Drives on controller 0? 0
      Drive type for controller 0, drive 0? fsd
vdformat> list
  The following operations will occur when Start is issued:
    Info: Controller 0, drive 0, type FSD.
    Format: Controller 1, drive 0, type EGL.
vdformat> help
  The following commands are available:
    KILL     - Abort all operations.
    STATus   - Display formatter state.
    RESET    - Reinitialize VDFORMAT, and start over.
    EXIT     - Terminate program.
    List     - List operations specified so far.
    Delete   - Delete specific operations.
    Format   - Format and verify disk surface.
    Verify   - Destructively verify disk surface.
    Relocate - Add known flaws to bad sector map.
    Correct  - Correct erroneous relocations or drive ID.
    Info     - Display known disk information.
    Profile  - Display seek profile graph of disk.
    Exercise - Perform seek exercises on disk.
    STARt    - Start operations.

vdformat> delete
    0) Info: Controller 0, drive 0, type FSD.
    1) Format: Controller 1, drive 0, type EGL.
  Delete line? 0
    Line 0 has been deleted.
  Delete line? 
  Delete line? 
  Delete line? 
  Delete line? -1
    Line 1 has been deleted.
  Delete line? ?
    The following commands are available:
      STATus - Display formatter state.
      QUIT   - Terminate current operation.
            Any line number between 0 and 1 may be entered.
        Delete line? q
  Delete line? quit
  Confirm quit operations? [Yes/No] yes
vdformat> format
  Format on which controllers? 1
    Drives on controller 1? 0
      Number of patterns to use while verifying? 1
      Drive type for controller 1, drive 0? (EGL) 
        Module serial number for controller 1, drive 0? (1) 
vdformat> list
  The following operations will occur when Start is issued:
    Format: Controller 1, drive 0, type EGL.
vdformat> start
stat  Starting format on controller 1, drive 0, type EGL.
us
        Formatting on controller 1, drive 0.
        Currently accessing cylinder 841, head 1.
        Currently determining drive state.
  Module serial numbers do not match!
  Use `info' to find the real serial number.
vdformat> info
  Info on which controllers? 1
    Drives on controller 1? 0
      Drive type for controller 1, drive 0? (EGL) 
vdformat> list
  The following operations will occur when Start is issued:
    Info: Controller 1, drive 0, type EGL.
vdformat> start
  Gathering information for controller 1, drive 0.

  Module serial number is 98765.
  Drive type is EGL.
  Drive contains a bad sector map.
  The following sector is known to be bad:
    cyl 840, head 9, pos 14550, len 1 (Sector #739619) -> Sector 736560.
  Information display completed successfully.
vdformat> format
  Format on which controllers? 1
    Drives on controller 1? 0
      Number of patterns to use while verifying? 1
      Drive type for controller 1, drive 0? (EGL) 
        Module serial number for controller 1, drive 0? (1) 98765
vdformat> start
  Starting format on controller 1, drive 0, type EGL.
Starting format on system areas
Starting format on data area
Starting verify on system areas
Starting verify on data area
    Error at sector 651795 (cyl 740 trk 13 sect 23),
      status=40d00000<CPDCRT,SFTERR,ANYERR,COMPLETE>, ecode=0x4d.
  Sector will be relocated.
vdformat> quit
Confirm quit operations? [Yes/No] y
vdformat> quit
Confirm quit operations? [Yes/No] yes
vdformat>