/*- * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz and Don Ahn. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)clock.c 7.2 (Berkeley) 5/12/91 */ /* * Primitive clock interrupt routines. */ #include "param.h" #include "time.h" #include "kernel.h" #include "machine/segments.h" #include "i386/isa/icu.h" #include "i386/isa/isa.h" #include "i386/isa/rtc.h" #define DAYST 119 #define DAYEN 303 startrtclock() { int s; /* initialize 8253 clock */ outb (IO_TIMER1+3, 0x36); outb (IO_TIMER1, 1193182/hz); outb (IO_TIMER1, (1193182/hz)/256); /* initialize brain-dead battery powered clock */ outb (IO_RTC, RTC_STATUSA); outb (IO_RTC+1, 0x26); outb (IO_RTC, RTC_STATUSB); outb (IO_RTC+1, 2); outb (IO_RTC, RTC_DIAG); if (s = inb (IO_RTC+1)) printf("RTC BIOS diagnostic error %b\n", s, RTCDG_BITS); outb (IO_RTC, RTC_DIAG); outb (IO_RTC+1, 0); } /* convert 2 digit BCD number */ bcd(i) int i; { return ((i/16)*10 + (i%16)); } /* convert years to seconds (from 1970) */ unsigned long ytos(y) int y; { int i; unsigned long ret; ret = 0; y = y - 70; for(i=0;i<y;i++) { if (i % 4) ret += 365*24*60*60; else ret += 366*24*60*60; } return ret; } /* convert months to seconds */ unsigned long mtos(m,leap) int m,leap; { int i; unsigned long ret; ret = 0; for(i=1;i<m;i++) { switch(i){ case 1: case 3: case 5: case 7: case 8: case 10: case 12: ret += 31*24*60*60; break; case 4: case 6: case 9: case 11: ret += 30*24*60*60; break; case 2: if (leap) ret += 29*24*60*60; else ret += 28*24*60*60; } } return ret; } /* * Initialize the time of day register, based on the time base which is, e.g. * from a filesystem. */ inittodr(base) time_t base; { unsigned long sec; int leap,day_week,t,yd; int sa,s; /* do we have a realtime clock present? (otherwise we loop below) */ sa = rtcin(RTC_STATUSA); if (sa == 0xff || sa == 0) return; /* ready for a read? */ while ((sa&RTCSA_TUP) == RTCSA_TUP) sa = rtcin(RTC_STATUSA); sec = bcd(rtcin(RTC_YEAR)); leap = !(sec % 4); sec += ytos(sec); /* year */ yd = mtos(bcd(rtcin(RTC_MONTH)),leap); sec += yd; /* month */ t = (bcd(rtcin(RTC_DAY))-1) * 24*60*60; sec += t; yd += t; /* date */ day_week = rtcin(RTC_WDAY); /* day */ sec += bcd(rtcin(RTC_HRS)) * 60*60; /* hour */ sec += bcd(rtcin(RTC_MIN)) * 60; /* minutes */ sec += bcd(rtcin(RTC_SEC)); /* seconds */ sec -= 24*60*60; /* XXX why ??? */ #ifdef notdef /* XXX off by one? Need to calculate DST on SUNDAY */ /* Perhaps we should have the RTC hold GMT time to save */ /* us the bother of converting. */ yd = yd / 24*60*60; if ((yd >= DAYST) && ( yd <= DAYEN)) { sec -= 60*60; } #endif sec += tz.tz_minuteswest * 60; time.tv_sec = sec; } #ifdef garbage /* * Initialze the time of day register, based on the time base which is, e.g. * from a filesystem. */ test_inittodr(base) time_t base; { outb(IO_RTC,9); /* year */ printf("%d ",bcd(inb(IO_RTC+1))); outb(IO_RTC,8); /* month */ printf("%d ",bcd(inb(IO_RTC+1))); outb(IO_RTC,7); /* day */ printf("%d ",bcd(inb(IO_RTC+1))); outb(IO_RTC,4); /* hour */ printf("%d ",bcd(inb(IO_RTC+1))); outb(IO_RTC,2); /* minutes */ printf("%d ",bcd(inb(IO_RTC+1))); outb(IO_RTC,0); /* seconds */ printf("%d\n",bcd(inb(IO_RTC+1))); time.tv_sec = base; } #endif /* * Restart the clock. */ resettodr() { } /* * Wire clock interrupt in. */ #define V(s) __CONCAT(V, s) extern V(clk)(); enablertclock() { INTREN(IRQ0); setidt(ICU_OFFSET+0, &V(clk), SDT_SYS386IGT, SEL_KPL); splnone(); }