Net2/usr/src/sys/vax/if/if_ecreg.h
/*
* Copyright (c) 1982, 1986 Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)if_ecreg.h 7.4 (Berkeley) 6/28/90
*/
/*
* 3Com Ethernet controller registers.
*/
struct ecdevice {
short ec_rcr; /* Receive Control Register */
short ec_xcr; /* Transmit Control Register */
};
/*
* Control and status bits -- rcr
*/
#define EC_SPIE 0x8000 /* set parity interrupt enable */
#define EC_ASTEP 0x4000 /* increment address counter */
#define EC_AROM 0x2000 /* 1: Use address ROM, 0: use RAM */
#define EC_PE 0x2000 /* Parity error */
#define EC_AWCLK 0x1000 /* address write clock bit */
#define EC_PIE 0x1000 /* Parity interrupt enable (read) */
#define EC_ADATA 0x0f00 /* address/filtering */
#define EC_RDONE 0x0080 /* receive done */
#define EC_MDISAB 0x0080 /* memory disable */
#define EC_RINTEN 0x0040 /* receive interrupt enable */
#define EC_RCLR 0x0020 /* clear RDONE bit */
#define EC_RWBN 0x0010 /* submit buffer for receive */
#define EC_RBN 0x000f /* buffer number */
#define EC_RBITS "\10\16PE\15PIE\10RDONE\7RINTEN"
/*
* Control and status bits -- xcr
*/
#define EC_JAM 0x8000 /* collision dectected */
#define EC_JINTEN 0x4000 /* collision interrupt enable */
#define EC_JCLR 0x2000 /* clear collision detect */
#define EC_UECLR 0x0100 /* reset controller */
#define EC_XDONE 0x0080 /* transmit done */
#define EC_XINTEN 0x0040 /* transmit interrupt enable */
#define EC_XCLR 0x0020 /* clear XDONE bit */
#define EC_XWBN 0x0010 /* submit buffer for transmit */
#define EC_XBN 0x000f /* buffer number */
#define EC_XBITS "\10\20JAM\17JINTEN\10XDONE\7XINTEN"
/*
* Useful combinations
*/
#define EC_READ (0x600|EC_RINTEN|EC_RWBN)
#define EC_MULTI (0x700|EC_RINTEN|EC_RWBN)
#define EC_PROMISC (0x000|EC_RINTEN|EC_RWBN)
#define EC_WRITE (EC_JINTEN|EC_XINTEN|EC_XWBN)
#define EC_CLEAR (EC_JINTEN|EC_XINTEN|EC_JCLR)
/*
* Buffer number definitions
*/
#define ECTBF 0 /* Buffer for transmit */
#define ECRLBF 1 /* First buffer for receive */
#define ECRHBF 15 /* Last buffer for receive */
#define ECRDOFF 528 /* Packet offset in read buffer */