NetBSD-5.0.2/sys/arch/netwinder/conf/GENERIC
# $NetBSD: GENERIC,v 1.93 2008/08/10 15:31:21 tls Exp $
#
# GENERIC machine description file
#
# This machine description file is used to generate the default NetBSD
# kernel. The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page. For further information about kernel options
# for this architecture, see the options(4) man page. For an explanation
# of each device driver in this file see the section 4 man page for the
# device.
include "arch/netwinder/conf/std.netwinder"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
# estimated number of users
maxusers 32
# Standard system options
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
#options NTP # NTP phase/frequency locked loop
# Enable experimental buffer queue strategy for better responsiveness under
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
#options BUFQ_READPRIO
#options BUFQ_PRIOCSCAN
# CPU options
# For StrongARM systems
options CPU_SA110 # Support the SA110 core
makeoptions CPUFLAGS="-march=armv4 -mtune=strongarm"
# FPA options
#options ARMFPE # ARM Ltd FPE
# Default console is wscons, if igsfb(4) and pckbc(4) are configured,
# or com(4) otherwise. You can force a serial console with these options
#options CONSDEVNAME="\"com\"",CONCOMADDR=0x3f8,CONSPEED=115200
# File systems
file-system FFS # UFS
#file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network file system
#file-system ADOSFS # AmigaDOS-compatible file system
file-system EXT2FS # second extended file system (linux)
#file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
#file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
#file-system UMAPFS # NULLFS + uid and gid remapping
#file-system UNION # union file system
file-system PTYFS # /dev/pts/N support
#file-system TMPFS # Efficient memory file-system
#file-system UDF # experimental - OSTA UDF CD/DVD file-system
# File system options
#options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independant support
#options FFS_NO_SNAPSHOT # No FFS snapshot support
options NFSSERVER
options SOFTDEP
options WAPBL # File system journaling support - Experimental
#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
# Networking options
#options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
#options PIM # Protocol Independent Multicast
#options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
#options NETATALK # AppleTalk networking
#options PFIL_HOOKS # pfil(9) packet filter hooks
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
#options PPP_DEFLATE # Deflate compression support for PPP
#options PPP_FILTER # Active filter support for PPP (requires bpf)
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
#options ALTQ # Manipulate network interfaces' output queues
#options ALTQ_BLUE # Stochastic Fair Blue
#options ALTQ_CBQ # Class-Based Queueing
#options ALTQ_CDNR # Diffserv Traffic Conditioner
#options ALTQ_FIFOQ # First-In First-Out Queue
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
#options ALTQ_HFSC # Hierarchical Fair Service Curve
#options ALTQ_LOCALQ # Local queueing discipline
#options ALTQ_PRIQ # Priority Queueing
#options ALTQ_RED # Random Early Detection
#options ALTQ_RIO # RED with IN/OUT
#options ALTQ_WFQ # Weighted Fair Queueing
options NFS_BOOT_BOOTP
options NFS_BOOT_DHCP
#options NFS_BOOT_BOOTPARAM
# Compatibility options
#options COMPAT_43 # 4.3BSD compatibility.
options COMPAT_40 # NetBSD 4.0 compatibility.
options COMPAT_30 # NetBSD 3.0 compatibility.
options COMPAT_20 # NetBSD 2.0 compatibility.
options COMPAT_16 # NetBSD 1.6 compatibility.
options COMPAT_15 # NetBSD 1.5 compatibility.
options COMPAT_14 # NetBSD 1.4 compatibility.
#options COMPAT_13 # NetBSD 1.3 compatibility.
#options COMPAT_12 # NetBSD 1.2 compatibility.
#options COMPAT_11 # NetBSD 1.1 compatibility.
#options COMPAT_10 # NetBSD 1.0 compatibility.
#options COMPAT_09 # NetBSD 0.9 compatibility.
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
options COMPAT_LINUX # binary compatibility with Linux
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
# Shared memory options
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
options SYSVSHM # System V-like memory sharing
options SHMMAXPGS=1024 # 1024 pages is the default
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
# Device options
#options MEMORY_DISK_HOOKS # boottime setup of ramdisk
#options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks
#options MEMORY_DISK_IS_ROOT # use memory disk as root
# Miscellaneous kernel options
options KTRACE # system call tracing, a la ktrace(1)
options IRQSTATS # manage IRQ statistics
#options LKM # loadable kernel modules
#options KMEMSTATS # kernel memory statistics
#options SCSIVERBOSE # Verbose SCSI errors
options PCIVERBOSE # Verbose PCI descriptions
options MIIVERBOSE # Verbose MII autoconfuration messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
#options DDB_KEYCODE=0x40
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
# Development and Debugging options
#options ARM700BUGTRACK # track the ARM700 swi bug
#options PORTMASTER # Enable PortMaster only options
#options DIAGNOSTIC # internally consistency checks
#options PMAP_DEBUG # Enable pmap_debug_level code
options DDB # in-kernel debugger
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
makeoptions DEBUG="-g" # compile full symbol table
options SYMTAB_SPACE=480000
config netbsd root on ? type ?
# The main bus device
mainbus0 at root
# The boot CPU
cpu0 at mainbus?
# Core logic
footbridge0 at mainbus?
# footbridge uart
#fcom0 at footbridge?
# system clock via footbridge
#clock* at footbridge?
# PCI bus via footbridge
pci0 at footbridge? # PCI bus
# ISA bus support
pcib* at pci? dev ? function ? # ISA bridge
isa* at pcib?
# PCI IDE Controllers and Devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
#pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
slide* at pci? dev ? function ? # Symphony Labs IDE controllers
# ATA (IDE) bus support
atabus* at ata?
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at atabus? drive ? flags 0x0000 # the drives themselves
# PCI network interfaces
ne* at pci? dev ? function ? # NE2000 compat ethernet
tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet
options TLP_MATCH_21142
# MII/PHY support
icsphy* at mii? phy ? # ISC-189x PHYs
ukphy* at mii? phy ? # generic unknown PHYs
# WSCONS Support
options WSEMUL_VT100 # VT100 / VT220 emulation
# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8)
#options WS_DEFAULT_FG=WSCOL_WHITE
#options WS_DEFAULT_BG=WSCOL_BLACK
#options WS_DEFAULT_COLATTR="(0)"
#options WS_DEFAULT_MONOATTR="(0)"
options WS_KERNEL_FG=WSCOL_GREEN
#options WS_KERNEL_BG=WSCOL_BLACK
options WS_KERNEL_COLATTR=WSATTR_HILIT
#options WS_KERNEL_MONOATTR="(0)"
# compatibility to other console drivers
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
options FONT_GALLANT12x22 # Sun PROM font look-alike
pckbc0 at isa?
pckbd* at pckbc?
wskbd* at pckbd? console ?
pms* at pckbc?
wsmouse* at pms? mux 0
igsfb* at pci? dev ? function ?
wsdisplay* at igsfb? console ?
# ISA Devices
com0 at isa? port 0x3f8 irq 4
lpt0 at isa? port 0x378 irq 7
# Audio Devices
# ISA audio devices
sb0 at isa? port 0x220 irq 3 drq 1 drq2 7 # SoundBlaster
opl* at sb?
mpu* at sb?
midi* at sb? # SB1 MIDI port
# Audio support
audio* at sb?
# Pseudo-Devices
pseudo-device crypto # /dev/crypto device
pseudo-device swcrypto # software crypto implementation
# disk/mass storage pseudo-devices
#pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd # disk-like interface to files
#options VND_COMPRESSION # compressed vnd(4)
pseudo-device fss 4 # file system snapshot device
#pseudo-device cgd 4 # cryptographic disk devices
# network pseudo-devices
pseudo-device bpfilter # Berkeley packet filter
#pseudo-device carp # Common Address Redundancy Protocol
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device bridge # simple inter-network bridging
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
pseudo-device loop # network loopback
#
# accept filters
pseudo-device accf_data # "dataready" accept filter
pseudo-device accf_http # "httpready" accept filter
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
pseudo-device rnd # /dev/random and in-kernel generator
pseudo-device clockctl # user control of clock subsystem
pseudo-device ksyms # /dev/ksyms
#pseudo-device pf # PF packet filter
#pseudo-device pflog # PF log if
# wscons pseudo-devices
pseudo-device wsmux # mouse & keyboard multiplexor
#pseudo-device wsfont
# Veriexec
#
# a pseudo device needed for veriexec
#pseudo-device veriexec 1
#
# Uncomment the fingerprint methods below that are desired. Note that
# removing fingerprint methods will have almost no impact on the kernel
# code size.
#
#options VERIFIED_EXEC_FP_RMD160
#options VERIFIED_EXEC_FP_SHA256
#options VERIFIED_EXEC_FP_SHA384
#options VERIFIED_EXEC_FP_SHA512
#options VERIFIED_EXEC_FP_SHA1
#options VERIFIED_EXEC_FP_MD5