NetBSD-5.0.2/sys/arch/newsmips/newsmips/autoconf.c
/* $NetBSD: autoconf.c,v 1.32 2008/02/16 22:02:15 he Exp $ */
/*
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department and Ralph Campbell.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah Hdr: autoconf.c 1.31 91/01/21
*
* @(#)autoconf.c 8.1 (Berkeley) 6/10/93
*/
/*
* Copyright (c) 1988 University of Utah.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department and Ralph Campbell.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah Hdr: autoconf.c 1.31 91/01/21
*
* @(#)autoconf.c 8.1 (Berkeley) 6/10/93
*/
/*
* Setup the system to run on the current machine.
*
* Configure() is called at boot time. Available
* devices are determined (from possibilities mentioned in ioconf.c),
* and the drivers are initialized.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: autoconf.c,v 1.32 2008/02/16 22:02:15 he Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/conf.h>
#include <sys/reboot.h>
#include <sys/device.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <machine/cpu.h>
#include <machine/adrsmap.h>
#include <machine/romcall.h>
#include <newsmips/newsmips/machid.h>
#include "scsibus.h"
/*
* The following several variables are related to
* the configuration process, and are used in initializing
* the machine.
*/
int cpuspeed = 10; /* approx # instr per usec. */
static void findroot(void);
/*
* Determine mass storage and memory configuration for a machine.
* Print CPU type, and then iterate over an array of devices
* found on the baseboard or in turbochannel option slots.
* Once devices are configured, enable interrupts, and probe
* for attached scsi devices.
*/
void
cpu_configure(void)
{
/*
* Kick off autoconfiguration
*/
_splnone(); /* enable all interrupts */
splhigh(); /* ...then disable device interrupts */
if (systype == NEWS3400) {
*(char *)INTEN0 = INTEN0_BERR; /* only buserr occurs */
*(char *)INTEN1 = 0;
}
if (config_rootfound("mainbus", NULL) == NULL)
panic("no mainbus found");
/* Enable hardware interrupt registers. */
enable_intr();
/* Configuration is finished, turn on interrupts. */
_splnone(); /* enable all source forcing SOFT_INTs cleared */
}
void
cpu_rootconf(void)
{
findroot();
printf("boot device: %s\n",
booted_device ? booted_device->dv_xname : "<unknown>");
setroot(booted_device, booted_partition);
}
u_long bootdev = 0; /* should be dev_t, but not until 32 bits */
/*
* Attempt to find the device from which we were booted.
*/
static void
findroot(void)
{
int ctlr, unit, part, type;
device_t dv;
if (BOOTDEV_MAG(bootdev) != 5) /* NEWS-OS's B_DEVMAGIC */
return;
ctlr = BOOTDEV_CTLR(bootdev); /* SCSI ID */
unit = BOOTDEV_UNIT(bootdev);
part = BOOTDEV_PART(bootdev); /* LUN */
type = BOOTDEV_TYPE(bootdev);
if (type != BOOTDEV_SD)
return;
/*
* XXX assumes only one controller exists.
*/
if ((dv = device_find_by_xname("scsibus0")) != NULL) {
#if NSCSIBUS > 0
struct scsibus_softc *sdv = device_private(dv);
struct scsipi_periph *periph;
periph = scsipi_lookup_periph(sdv->sc_channel, ctlr, 0);
if (periph != NULL) {
booted_device = periph->periph_dev;
booted_partition = part;
}
#endif /* NSCSIBUS > 0 */
}
}