NetBSD-5.0.2/sys/dev/pci/n8/common/displayRegs.c
/*-
* Copyright (C) 2001-2003 by NBMK Encryption Technologies.
* All rights reserved.
*
* NBMK Encryption Technologies provides no support of any kind for
* this software. Questions or concerns about it may be addressed to
* the members of the relevant open-source community at
* <tech-crypto@netbsd.org>.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
static char const n8_id[] = "$Id: displayRegs.c,v 1.1 2008/10/30 12:02:14 darran Exp $";
/*****************************************************************************/
/** @file displayRegs.c
* @brief NSP2000 Device Driver register display functions
*
* This file displays the register set of the NSP2000 device for debugging
* purposes.
*
*****************************************************************************/
/*****************************************************************************
* Revision history:
* 11/25/02 brr Added banner to display software version.
* 10/23/02 brr Do not display RNG registers by default (locks up RNH).
* 10/25/02 brr Clean up function prototypes & include files.
* 03/19/02 brr Modifed N8_DisplayRegisters to dump all registers for all
* devices.
* 02/25/02 brr Use N8_PRINT.
* 11/10/01 brr Modified to support static allocations of persistant data
* by the driver.
* 09/07/01 mmd Further removal of references to "simon", and added support
* for displaying PKH registers.
* 08/16/01 mmd Now includes nsp2000_regs.h instead of simon.h.
* 08/08/01 brr Moved all OS kernel specific macros to helper.h.
* 07/26/01 brr Original version.
****************************************************************************/
/** @defgroup NSP2000Driver NSP2000 Device Driver
*/
#include "n8_OS_intf.h"
#include "helper.h"
#include "nsp2000_regs.h"
#include "n8_driver_main.h"
#include "nsp_ioctl.h"
#include "n8_driver_api.h"
#include "displayRegs.h"
#include "n8_version.h"
extern int NSPcount_g;
extern NspInstance_t NSPDeviceTable_g [DEF_MAX_SIMON_INSTANCES];
/*****************************************************************************
* N8_DisplayRegisters
*****************************************************************************/
/** @ingroup NSP2000Driver
* @brief Displays the contents of all NSP2000 control registers.
*
* This routine displays the contents of all NSP2000 control registers to the
* kernel log. This routine is intended for debugging purposes.
*
* @return
* N/A
*
* @par Errors:
* See return section for error information.
*****************************************************************************/
void N8_DisplayRegisters(void)
{
int nspIdx;
NspInstance_t *NSPinstance_p;
NSP2000REGS_t *nsp;
N8_PRINT(KERN_CRIT "\nN8_DisplayRegisters: " N8_VERSION_STRING);
for (nspIdx = 0; nspIdx < NSPcount_g; nspIdx++)
{
NSPinstance_p = &NSPDeviceTable_g[nspIdx];
nsp = (NSP2000REGS_t *)NSPinstance_p->NSPregs_p;
N8_PRINT(KERN_CRIT "\n");
N8_PRINT(KERN_CRIT "NSP2000: Displaying AMBA registers for chip %d:\n",
NSPinstance_p->chip);
N8_PRINT(KERN_CRIT " Timer preset = %08lx\n",
(unsigned long)nsp->amba_pci_timer_preset);
N8_PRINT(KERN_CRIT " Status = %08lx\n",
(unsigned long)nsp->amba_pci_status);
N8_PRINT(KERN_CRIT " Control = %08lx\n",
(unsigned long)nsp->amba_pci_control);
N8_PRINT(KERN_CRIT " Timer value = %08lx\n",
(unsigned long)nsp->amba_pci_timer_value);
N8_PRINT(KERN_CRIT "\n");
N8_PRINT(KERN_CRIT "NSP2000: Displaying CCH registers :\n");
N8_PRINT(KERN_CRIT " Test1 = %08lx\n",
(unsigned long)nsp->cch_test1);
N8_PRINT(KERN_CRIT " Test0 = %08lx\n",
(unsigned long)nsp->cch_test0);
N8_PRINT(KERN_CRIT " QueueLgth = %08lx\n",
(unsigned long)nsp->cch_q_length);
N8_PRINT(KERN_CRIT " QueuePtrs = %08lx\n",
(unsigned long)nsp->cch_q_ptr);
N8_PRINT(KERN_CRIT " QueueBase1 = %08lx\n",
(unsigned long)nsp->cch_q_bar1);
N8_PRINT(KERN_CRIT " QueueBase0 = %08lx\n",
(unsigned long)nsp->cch_q_bar0);
N8_PRINT(KERN_CRIT " IRQ Enable = %08lx\n",
(unsigned long)nsp->cch_intr_enable);
N8_PRINT(KERN_CRIT " Ctrl-Stat = %08lx\n",
(unsigned long)nsp->cch_control_status);
N8_PRINT(KERN_CRIT " Cntx Data1 = %08lx\n",
(unsigned long)nsp->cch_context_data1);
N8_PRINT(KERN_CRIT " Cntx Data0 = %08lx\n",
(unsigned long)nsp->cch_context_data0);
N8_PRINT(KERN_CRIT " Cntx Addr = %08lx\n",
(unsigned long)nsp->cch_context_addr);
#ifdef DISPLAY_RNG_REGISTERS
N8_PRINT(KERN_CRIT "\n");
N8_PRINT(KERN_CRIT "NSP2000: Displaying RNG registers :\n");
N8_PRINT(KERN_CRIT " TOD Seconds = %08lx\n",
(unsigned long)nsp->rng_tod_seconds);
N8_PRINT(KERN_CRIT " TOD Prescale = %08lx\n",
(unsigned long)nsp->rng_tod_prescale);
N8_PRINT(KERN_CRIT " TOD MSW = %08lx\n",
(unsigned long)nsp->rng_tod_msw);
N8_PRINT(KERN_CRIT " TOD LSW = %08lx\n",
(unsigned long)nsp->rng_tod_lsw);
N8_PRINT(KERN_CRIT " Key 1 MSW = %08lx\n",
(unsigned long)nsp->rng_key1_msw);
N8_PRINT(KERN_CRIT " Key 1 LSW = %08lx\n",
(unsigned long)nsp->rng_key1_lsw);
N8_PRINT(KERN_CRIT " Key 2 MSW = %08lx\n",
(unsigned long)nsp->rng_key2_msw);
N8_PRINT(KERN_CRIT " Key 2 LSW = %08lx\n",
(unsigned long)nsp->rng_key2_lsw);
N8_PRINT(KERN_CRIT " Host Seed MSW = %08lx\n",
(unsigned long)nsp->rng_hostseed_msw);
N8_PRINT(KERN_CRIT " Host Seed LSW = %08lx\n",
(unsigned long)nsp->rng_hostseed_lsw);
N8_PRINT(KERN_CRIT " Sample Interval = %08lx\n",
(unsigned long)nsp->rng_sample_interval);
N8_PRINT(KERN_CRIT " Ext. Clk Scalar = %08lx\n",
(unsigned long)nsp->rng_external_clock_scalar);
N8_PRINT(KERN_CRIT " Buff Write Ptr = %08lx\n",
(unsigned long)nsp->rng_buffer_write_ptr);
N8_PRINT(KERN_CRIT " Sample Seed MSW = %08lx\n",
(unsigned long)nsp->rng_sample_seed_msw);
N8_PRINT(KERN_CRIT " Sample Seed LSW = %08lx\n",
(unsigned long)nsp->rng_sample_seed_lsw);
N8_PRINT(KERN_CRIT " LSFR Diag = %08lx\n",
(unsigned long)nsp->rng_lsfr_diag);
N8_PRINT(KERN_CRIT " LSFR Hist 1 MSW = %08lx\n",
(unsigned long)nsp->rng_lsfr1_history_msw);
N8_PRINT(KERN_CRIT " LSFR Hist 1 LSW = %08lx\n",
(unsigned long)nsp->rng_lsfr1_history_lsw);
N8_PRINT(KERN_CRIT " LSFR Hist 2 MSW = %08lx\n",
(unsigned long)nsp->rng_lsfr2_history_msw);
N8_PRINT(KERN_CRIT " LSFR Hist 2 LSW = %08lx\n",
(unsigned long)nsp->rng_lsfr2_history_lsw);
N8_PRINT(KERN_CRIT " LSFR Hist 3 MSW = %08lx\n",
(unsigned long)nsp->rng_lsfr3_history_msw);
N8_PRINT(KERN_CRIT " LSFR Hist 3 LSW = %08lx\n",
(unsigned long)nsp->rng_lsfr3_history_lsw);
N8_PRINT(KERN_CRIT " LSFR Hist 4 MSW = %08lx\n",
(unsigned long)nsp->rng_lsfr4_history_msw);
N8_PRINT(KERN_CRIT " LSFR Hist 4 LSW = %08lx\n",
(unsigned long)nsp->rng_lsfr4_history_lsw);
N8_PRINT(KERN_CRIT " CtrlStatus = %08lx\n",
(unsigned long)nsp->rng_control_status);
#endif
N8_PRINT(KERN_CRIT "\n");
N8_PRINT(KERN_CRIT "NSP2000: Displaying RNH registers :\n");
N8_PRINT(KERN_CRIT " Test 0 = %08lx\n",
(unsigned long)nsp->rnh_test0);
N8_PRINT(KERN_CRIT " Test 1 = %08lx\n",
(unsigned long)nsp->rnh_test1);
N8_PRINT(KERN_CRIT " QueueLgth = %08lx\n",
(unsigned long)nsp->rnh_q_length);
N8_PRINT(KERN_CRIT " QueuePtrs = %08lx\n",
(unsigned long)nsp->rnh_q_ptr);
N8_PRINT(KERN_CRIT " QueueBase0 = %08lx\n",
(unsigned long)nsp->rnh_q_bar0);
N8_PRINT(KERN_CRIT " QueueBase1 = %08lx\n",
(unsigned long)nsp->rnh_q_bar1);
N8_PRINT(KERN_CRIT " CtrlStatus = %08lx\n",
(unsigned long)nsp->rnh_control_status);
N8_PRINT(KERN_CRIT "\n");
N8_PRINT(KERN_CRIT "NSP2000: Displaying PKH registers :\n");
N8_PRINT(KERN_CRIT " Test 0 = %08lx\n",
(unsigned long)nsp->pkh_test0);
N8_PRINT(KERN_CRIT " Test 1 = %08lx\n",
(unsigned long)nsp->pkh_test1);
N8_PRINT(KERN_CRIT " Cmd Q Length = %08lx\n",
(unsigned long)nsp->pkh_q_length);
N8_PRINT(KERN_CRIT " Cmd Q Pointers = %08lx\n",
(unsigned long)nsp->pkh_q_ptr);
N8_PRINT(KERN_CRIT " Cmd Q Base 1 = %08lx\n",
(unsigned long)nsp->pkh_q_bar1);
N8_PRINT(KERN_CRIT " Cmd Q Base 0 = %08lx\n",
(unsigned long)nsp->pkh_q_bar0);
N8_PRINT(KERN_CRIT " IRQ Enables = %08lx\n",
(unsigned long)nsp->pkh_intr_enable);
N8_PRINT(KERN_CRIT " Control/Status = %08lx\n",
(unsigned long)nsp->pkh_control_status);
N8_PRINT(KERN_CRIT " SKS Data = %08lx\n",
(unsigned long)nsp->pkh_secure_key_storage_data);
N8_PRINT(KERN_CRIT " SKS Control = %08lx\n",
(unsigned long)nsp->pkh_secure_key_storage_control);
}
return;
}