NetBSD-5.0.2/dist/nvi/ex/ex_txt.c
/* $NetBSD: ex_txt.c,v 1.1.1.2.6.2 2009/01/20 02:56:07 snj Exp $ */
/*-
* Copyright (c) 1992, 1993, 1994
* The Regents of the University of California. All rights reserved.
* Copyright (c) 1992, 1993, 1994, 1995, 1996
* Keith Bostic. All rights reserved.
*
* See the LICENSE file for redistribution information.
*/
#include "config.h"
#ifndef lint
static const char sccsid[] = "Id: ex_txt.c,v 10.23 2001/06/25 15:19:21 skimo Exp (Berkeley) Date: 2001/06/25 15:19:21";
#endif /* not lint */
#include <sys/types.h>
#include <sys/queue.h>
#include <sys/time.h>
#include <bitstring.h>
#include <ctype.h>
#include <limits.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "../common/common.h"
#include "../vi/vi.h"
/*
* !!!
* The backslash characters was special when it preceded a newline as part of
* a substitution replacement pattern. For example, the input ":a\<cr>" would
* failed immediately with an error, as the <cr> wasn't part of a substitution
* replacement pattern. This implies a frightening integration of the editor
* and the parser and/or the RE engine. There's no way I'm going to reproduce
* those semantics.
*
* So, if backslashes are special, this code inserts the backslash and the next
* character into the string, without regard for the character or the command
* being entered. Since "\<cr>" was illegal historically (except for the one
* special case), and the command will fail eventually, no historical scripts
* should break (presuming they didn't depend on the failure mode itself or the
* characters remaining when failure occurred.
*/
static int txt_dent __P((SCR *, TEXT *));
static void txt_prompt __P((SCR *, TEXT *, ARG_CHAR_T, u_int32_t));
/*
* ex_txt --
* Get lines from the terminal for ex.
*
* PUBLIC: int ex_txt __P((SCR *, TEXTH *, ARG_CHAR_T, u_int32_t));
*/
int
ex_txt(SCR *sp, TEXTH *tiqh, ARG_CHAR_T prompt, u_int32_t flags)
{
EVENT ev;
GS *gp;
TEXT ait, *ntp, *tp;
carat_t carat_st;
size_t cnt;
int rval;
rval = 0;
/*
* Get a TEXT structure with some initial buffer space, reusing the
* last one if it's big enough. (All TEXT bookkeeping fields default
* to 0 -- text_init() handles this.)
*/
if (tiqh->cqh_first != (void *)tiqh) {
tp = tiqh->cqh_first;
if (tp->q.cqe_next != (void *)tiqh || tp->lb_len < 32) {
text_lfree(tiqh);
goto newtp;
}
tp->len = 0;
} else {
newtp: if ((tp = text_init(sp, NULL, 0, 32)) == NULL)
goto err;
CIRCLEQ_INSERT_HEAD(tiqh, tp, q);
}
/* Set the starting line number. */
tp->lno = sp->lno + 1;
/*
* If it's a terminal, set up autoindent, put out the prompt, and
* set it up so we know we were suspended. Otherwise, turn off
* the autoindent flag, as that requires less special casing below.
*
* XXX
* Historic practice is that ^Z suspended command mode (but, because
* it ran in cooked mode, it was unaffected by the autowrite option.)
* On restart, any "current" input was discarded, whether in insert
* mode or not, and ex was in command mode. This code matches historic
* practice, but not 'cause it's easier.
*/
gp = sp->gp;
if (F_ISSET(gp, G_SCRIPTED))
LF_CLR(TXT_AUTOINDENT);
else {
if (LF_ISSET(TXT_AUTOINDENT)) {
LF_SET(TXT_EOFCHAR);
if (v_txt_auto(sp, sp->lno, NULL, 0, tp))
goto err;
}
txt_prompt(sp, tp, prompt, flags);
}
for (carat_st = C_NOTSET;;) {
if (v_event_get(sp, &ev, 0, 0))
goto err;
/* Deal with all non-character events. */
switch (ev.e_event) {
case E_CHARACTER:
break;
case E_ERR:
goto err;
case E_REPAINT:
case E_WRESIZE:
continue;
case E_EOF:
rval = 1;
/* FALLTHROUGH */
case E_INTERRUPT:
/*
* Handle EOF/SIGINT events by discarding partially
* entered text and returning. EOF returns failure,
* E_INTERRUPT returns success.
*/
goto notlast;
default:
v_event_err(sp, &ev);
goto notlast;
}
/*
* Deal with character events.
*
* Check to see if the character fits into the input buffer.
* (Use tp->len, ignore overwrite and non-printable chars.)
*/
BINC_GOTOW(sp, tp->lb, tp->lb_len, tp->len + 1);
switch (ev.e_value) {
case K_CR:
/*
* !!!
* Historically, <carriage-return>'s in the command
* weren't special, so the ex parser would return an
* unknown command error message. However, if they
* terminated the command if they were in a map. I'm
* pretty sure this still isn't right, but it handles
* what I've seen so far.
*/
if (!FL_ISSET(ev.e_flags, CH_MAPPED))
goto ins_ch;
/* FALLTHROUGH */
case K_NL:
/*
* '\' can escape <carriage-return>/<newline>. We
* don't discard the backslash because we need it
* to get the <newline> through the ex parser.
*/
if (LF_ISSET(TXT_BACKSLASH) &&
tp->len != 0 && tp->lb[tp->len - 1] == '\\')
goto ins_ch;
/*
* CR returns from the ex command line.
*
* XXX
* Terminate with a nul, needed by filter.
*/
if (LF_ISSET(TXT_CR)) {
tp->lb[tp->len] = '\0';
goto done;
}
/*
* '.' may terminate text input mode; free the current
* TEXT.
*/
if (LF_ISSET(TXT_DOTTERM) && tp->len == tp->ai + 1 &&
tp->lb[tp->len - 1] == '.') {
notlast: CIRCLEQ_REMOVE(tiqh, tp, q);
text_free(tp);
goto done;
}
/* Set up bookkeeping for the new line. */
if ((ntp = text_init(sp, NULL, 0, 32)) == NULL)
goto err;
ntp->lno = tp->lno + 1;
/*
* Reset the autoindent line value. 0^D keeps the ai
* line from changing, ^D changes the level, even if
* there were no characters in the old line. Note, if
* using the current tp structure, use the cursor as
* the length, the autoindent characters may have been
* erased.
*/
if (LF_ISSET(TXT_AUTOINDENT)) {
if (carat_st == C_NOCHANGE) {
if (v_txt_auto(sp,
OOBLNO, &ait, ait.ai, ntp))
goto err;
free(ait.lb);
} else
if (v_txt_auto(sp,
OOBLNO, tp, tp->len, ntp))
goto err;
carat_st = C_NOTSET;
}
txt_prompt(sp, ntp, prompt, flags);
/*
* Swap old and new TEXT's, and insert the new TEXT
* into the queue.
*/
tp = ntp;
CIRCLEQ_INSERT_TAIL(tiqh, tp, q);
break;
case K_CARAT: /* Delete autoindent chars. */
if (tp->len <= tp->ai && LF_ISSET(TXT_AUTOINDENT))
carat_st = C_CARATSET;
goto ins_ch;
case K_ZERO: /* Delete autoindent chars. */
if (tp->len <= tp->ai && LF_ISSET(TXT_AUTOINDENT))
carat_st = C_ZEROSET;
goto ins_ch;
case K_CNTRLD: /* Delete autoindent char. */
/*
* !!!
* Historically, the ^D command took (but then ignored)
* a count. For simplicity, we don't return it unless
* it's the first character entered. The check for len
* equal to 0 is okay, TXT_AUTOINDENT won't be set.
*/
if (LF_ISSET(TXT_CNTRLD)) {
for (cnt = 0; cnt < tp->len; ++cnt)
if (!isblank(tp->lb[cnt]))
break;
if (cnt == tp->len) {
tp->len = 1;
tp->lb[0] = ev.e_c;
tp->lb[1] = '\0';
/*
* Put out a line separator, in case
* the command fails.
*/
(void)putchar('\n');
goto done;
}
}
/*
* POSIX 1003.1b-1993, paragraph 7.1.1.9, states that
* the EOF characters are discarded if there are other
* characters to process in the line, i.e. if the EOF
* is not the first character in the line. For this
* reason, historic ex discarded the EOF characters,
* even if occurring in the middle of the input line.
* We match that historic practice.
*
* !!!
* The test for discarding in the middle of the line is
* done in the switch, because the CARAT forms are N+1,
* not N.
*
* !!!
* There's considerable magic to make the terminal code
* return the EOF character at all. See that code for
* details.
*/
if (!LF_ISSET(TXT_AUTOINDENT) || tp->len == 0)
continue;
switch (carat_st) {
case C_CARATSET: /* ^^D */
if (tp->len > tp->ai + 1)
continue;
/* Save the ai string for later. */
ait.lb = NULL;
ait.lb_len = 0;
BINC_GOTOW(sp, ait.lb, ait.lb_len, tp->ai);
MEMCPYW(ait.lb, tp->lb, tp->ai);
ait.ai = ait.len = tp->ai;
carat_st = C_NOCHANGE;
goto leftmargin;
case C_ZEROSET: /* 0^D */
if (tp->len > tp->ai + 1)
continue;
carat_st = C_NOTSET;
leftmargin: (void)gp->scr_ex_adjust(sp, EX_TERM_CE);
tp->ai = tp->len = 0;
break;
case C_NOTSET: /* ^D */
if (tp->len > tp->ai)
continue;
if (txt_dent(sp, tp))
goto err;
break;
default:
abort();
}
/* Clear and redisplay the line. */
(void)gp->scr_ex_adjust(sp, EX_TERM_CE);
txt_prompt(sp, tp, prompt, flags);
break;
default:
/*
* See the TXT_BEAUTIFY comment in vi/v_txt_ev.c.
*
* Silently eliminate any iscntrl() character that was
* not already handled specially, except for <tab> and
* <ff>.
*/
ins_ch: if (LF_ISSET(TXT_BEAUTIFY) && ISCNTRL(ev.e_c) &&
ev.e_value != K_FORMFEED && ev.e_value != K_TAB)
break;
tp->lb[tp->len++] = ev.e_c;
break;
}
}
/* NOTREACHED */
done: return (rval);
err:
alloc_err:
return (1);
}
/*
* txt_prompt --
* Display the ex prompt, line number, ai characters. Characters had
* better be printable by the terminal driver, but that's its problem,
* not ours.
*/
static void
txt_prompt(SCR *sp, TEXT *tp, ARG_CHAR_T prompt, u_int32_t flags)
{
/* Display the prompt. */
if (LF_ISSET(TXT_PROMPT))
(void)ex_printf(sp, "%c", prompt);
/* Display the line number. */
if (LF_ISSET(TXT_NUMBER) && O_ISSET(sp, O_NUMBER))
(void)ex_printf(sp, "%6lu ", (u_long)tp->lno);
/* Print out autoindent string. */
if (LF_ISSET(TXT_AUTOINDENT))
(void)ex_printf(sp, "%.*s", (int)tp->ai, tp->lb);
(void)ex_fflush(sp);
}
/*
* txt_dent --
* Handle ^D outdents.
*
* Ex version of vi/v_ntext.c:txt_dent(). See that code for the (usual)
* ranting and raving. This is a fair bit simpler as ^T isn't special.
*/
static int
txt_dent(SCR *sp, TEXT *tp)
{
u_long sw, ts;
size_t cno, off, scno, spaces, tabs;
ts = O_VAL(sp, O_TABSTOP);
sw = O_VAL(sp, O_SHIFTWIDTH);
/* Get the current screen column. */
for (off = scno = 0; off < tp->len; ++off)
if (tp->lb[off] == '\t')
scno += COL_OFF(scno, ts);
else
++scno;
/* Get the previous shiftwidth column. */
cno = scno--;
scno -= scno % sw;
/*
* Since we don't know what comes before the character(s) being
* deleted, we have to resolve the autoindent characters . The
* example is a <tab>, which doesn't take up a full shiftwidth
* number of columns because it's preceded by <space>s. This is
* easy to get if the user sets shiftwidth to a value less than
* tabstop, and then uses ^T to indent, and ^D to outdent.
*
* Count up spaces/tabs needed to get to the target.
*/
cno = 0;
tabs = 0;
if (!O_ISSET(sp, O_EXPANDTABS)) {
for (; cno + COL_OFF(cno, ts) <= scno; ++tabs)
cno += COL_OFF(cno, ts);
}
spaces = scno - cno;
/* Make sure there's enough room. */
BINC_RETW(sp, tp->lb, tp->lb_len, tabs + spaces + 1);
/* Adjust the final ai character count. */
tp->ai = tabs + spaces;
/* Enter the replacement characters. */
for (tp->len = 0; tabs > 0; --tabs)
tp->lb[tp->len++] = '\t';
for (; spaces > 0; --spaces)
tp->lb[tp->len++] = ' ';
return (0);
}