NetBSD-5.0.2/distrib/cdrom/1.6.1.conf
# $NetBSD: 1.6.1.conf,v 1.2 2003/07/26 17:06:37 salo Exp $
#
# Makefile fragment for CD sets; includes config information.
##############################################################################
# The names of the individual CD images, without ".iso".
# This also indicates the suffix of configuration variables later in this file
# which are CD-image specific.
CD_IMAGES= multi-cd1 multi-cd2
CD_IMAGES+= acorn26cd acorn32cd algorcd alphacd amigacd arccd ataricd
CD_IMAGES+= catscd cobaltcd dreamcastcd evbarmcd evbmipscd evbsh3cd hp300cd
CD_IMAGES+= hpcarmcd hpcmipscd hpcshcd i386cd luna68kcd mac68kcd macppccd
CD_IMAGES+= mipscocd mvme68kcd netwindercd news68kcd newsmipscd next68kcd
CD_IMAGES+= pmaxcd prepcd sandpointcd sbmipscd sgimipscd sharkcd
CD_IMAGES+= sourcecd sparccd sparc64cd sun2cd sun3cd vaxcd walnutcd x68kcd
##############################################################################
# The maximum size of an individual CD.
CD_SIZE= 700000
##############################################################################
# The NetBSD release being packaged on this CD set. This also implies
# inclusion of a config file for that release, named NetBSD-${CD_RELEASE}.mk.
# That file defines the various per-port specifics for that release.
CD_RELEASE= 1.6.1
##############################################################################
# The CD volume IDs for each CD-ROM image. This will show up as the
# "volume label" on most operating systems. This is REQUIRED for each image.
# Typically only 16 characters should be used for maximum OS compatibility.
.for image in ${CD_IMAGES}
VOLID.${image}= NetBSD ${CD_RELEASE} CD ${image:S/^cd//}
.endfor
# The "abstract file" name. If there is a file in the CD root describing
# use of the CD or booting info, this may be useful to some OS's.
#.for image in ${CD_IMAGES}
#ABSTRACT.${image}= booting.txt
#.endfor
# The "copyright file" name. If there is a file in the CD root describing
# the copyright of the contained files, this may be useful to some OS's.
# This usually needs ADDFILES to go along with it.
#.for image in ${CD_IMAGES}
#COPYRIGHT.${image}= copyrght.txt
#ADDFILES.${image}+= copyrght.txt:${.CURDIR}/extra/copyright.txt,link
#.endfor
# The "publisher name" field on the CD-ROM. Room for 128 characters.
PUBLISHER= The NetBSD Foundation, Inc. / http://www.NetBSD.org/
# The "preparer name" field on the CD-ROM. Room for 128 characters.
PREPARER= NetBSD CD Build System
##############################################################################
# The ports for which the base OS binaries will be included.
# MACHINE_ARCH shared distribution directories and the "ALL" shared
# distribution directory are added automatically where needed.
#
# The following ports, if included, will be bootable on their respective
# CD images:
#
# alpha, cats, i386, macppc, pmax, sparc, sparc64, sun3, vax.
#
# Special notes on booting:
#
# * macppc and mac68k will cause the inclusion of HFS partition and
# filesystem info on the CD, with automatic MacBinary probing and encoding.
#
# * macppc cannot boot on the same disc as either pmax or vax.
# macppc uses the same locations in block 0 to store boot
# information as pmax and vax.
# This will cause a warning in the build, and macppc will override.
#
# * sparc64 cannot boot using default boot arguments on the same disc as
# the sun3x model of sun3. These platforms use the same partitions
# in the Sun boot map by default. This will cause a warning in the build,
# and sparc64 machines will have to boot with "boot cdrom:g" instead of
# "boot cdrom".
BASE_PORTS.multi-cd1= i386 macppc sparc sparc64 source
BASE_PORTS.multi-cd2= alpha \
amiga atari hp300 mac68k mvme68k news68k next68k sun3 \
cobalt hpcmips pmax \
vax
BASE_PORTS.acorn26cd=acorn26
BASE_PORTS.acorn32cd=acorn32
BASE_PORTS.algorcd=algor
BASE_PORTS.alphacd=alpha
BASE_PORTS.amigacd=amiga
BASE_PORTS.arccd=arc
BASE_PORTS.ataricd=atari
BASE_PORTS.catscd=cats
BASE_PORTS.cobaltcd=cobalt
BASE_PORTS.dreamcastcd=dreamcast
BASE_PORTS.evbarmcd=evbarm
BASE_PORTS.evbmipscd=evbmips
BASE_PORTS.evbsh3cd=evbsh3
BASE_PORTS.hp300cd=hp300
BASE_PORTS.hpcarmcd=hpcarm
BASE_PORTS.hpcmipscd=hpcmips
BASE_PORTS.hpcshcd=hpcsh
BASE_PORTS.i386cd=i386
BASE_PORTS.luna68kcd=luna68k
BASE_PORTS.mac68kcd=mac68k
BASE_PORTS.macppccd=macppc
BASE_PORTS.mipscocd=mipsco
BASE_PORTS.mvme68kcd=mvme68k
BASE_PORTS.netwindercd=netwinder
BASE_PORTS.news68kcd=news68k
BASE_PORTS.newsmipscd=newsmips
BASE_PORTS.next68kcd=next68k
BASE_PORTS.pmaxcd=pmax
BASE_PORTS.prepcd=prep
BASE_PORTS.sandpointcd=sandpoint
BASE_PORTS.sbmipscd=sbmips
BASE_PORTS.sgimipscd=sgimips
BASE_PORTS.sharkcd=shark
BASE_PORTS.sourcecd=source
BASE_PORTS.sparccd=sparc
BASE_PORTS.sparc64cd=sparc64
BASE_PORTS.sun2cd=sun2
BASE_PORTS.sun3cd=sun3
BASE_PORTS.vaxcd=vax
BASE_PORTS.walnutcd=walnut
BASE_PORTS.x68kcd=x68k
.for image in ${CD_IMAGES}
#INTDIRS.${image}+= packages
BASE_PORTS.${image}+= CHANGES CHANGES-1.6.1 CHANGES.prev LAST_MINUTE README.files
.endfor
##############################################################################
# These provide additional functionality to some host OS's that may or may
# not be desired in some cases. Uncomment to enable, or comment out to
# disable.
# USE_ROCK_RIDGE adds -r to mkisofs to use full Un*x style pathnames and
# permissions. For most situations, this is needed.
USE_ROCK_RIDGE= yes
# USE_LONG_NAMES adds -l to mkisofs to use full 32-character ISO-9660 names.
# This allows some host OS's, particularly AmigaDOS, the ability to see long
# filenames in most cases.
USE_LONG_NAMES= yes
# USE_TRANS_TBL adds -T to mkisofs to provide long names through the use of
# TRANS.TBL translation table files. (These will automatically be hidden
# from Joliet and HFS trees.) Typically this is not used in conjunction
# with USE_LONG_NAMES, but may be used if names still exceed 32 characters.
#USE_TRANS_TBL= yes
# USE_JOLIET adds -J to mkisofs to provide Joliet long filename support for
# Microsoft Windows OS's
USE_JOLIET= yes
# USE_APPLE_ISO adds -apple to mkisofs to provide the Apple ISO-9660
# Extensions. This gives full MacOS attribute information to files without
# the overhead of full HFS. (A disc that is forced into HFS mode by the
# presence of mac68k or macppc will use HFS, not the Apple ISO Extensions.)
USE_APPLE_ISO= yes
# LOG_MKISOFS causes the mkisofs command to be logged in "extra verbose"
# mode (-v -v) to the image filename with .log appended.
#LOG_MKISOFS= yes
##############################################################################
# "Easter egg" file. If this option is present, the standard 32k end padding
# is replaced by a message in this file (no more than 16k), padded to 32k
# with null bytes.
#EASTER_EGG= ${.CURDIR}/extra/egg.txt
##############################################################################