NetBSD-5.0.2/sbin/newfs/newfs.8

.\"	$NetBSD: newfs.8,v 1.72 2008/08/01 15:32:29 simonb Exp $
.\"
.\" Copyright (c) 1983, 1987, 1991, 1993, 1994
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     @(#)newfs.8	8.6 (Berkeley) 5/3/95
.\"
.Dd December 10, 2007
.Dt NEWFS 8
.Os
.Sh NAME
.Nm newfs
.Nd construct a new file system
.Sh SYNOPSIS
.Nm
.Op Fl FINZ
.Op Fl a Ar maxcontig
.Op Fl B Ar byte-order
.Op Fl b Ar block-size
.Op Fl d Ar maxbsize
.Op Fl e Ar maxbpg
.Op Fl f Ar frag-size
.Op Fl g Ar avgfilesize
.Op Fl h Ar avgfpdir
.Op Fl i Ar bytes-per-inode
.Op Fl m Ar free-space
.Op Fl n Ar inodes
.Op Fl O Ar filesystem-format
.Op Fl o Ar optimization
.Op Fl S Ar sector-size
.Op Fl s Ar size
.Op Fl T Ar disk-type
.Op Fl v Ar volname
.Op Fl V Ar verbose
.Ar special
.Sh DESCRIPTION
.Nm
is used to initialize and clear file systems before first use.
Before running
.Nm
the disk must be labeled using
.Xr disklabel 8 .
.Nm
builds a file system on the specified special device
basing its defaults on the information in the disk label.
Typically the defaults are reasonable, however
.Nm
has numerous options to allow the defaults to be selectively overridden.
.Pp
Options with numeric arguments may contain an optional (case-insensitive)
suffix:
.Bl -tag -width 3n -offset indent -compact
.It b
Bytes; causes no modification.
(Default)
.It k
Kilo; multiply the argument by 1024
.It m
Mega; multiply the argument by 1048576
.It g
Giga; multiply the argument by 1073741824
.It t
Tera; multiply the argument by 1099511627776
.El
.Pp
The following options define the general layout policies.
.Bl -tag -width Fl
.It Fl a Ar maxcontig
This sets the obsolete maxcontig parameter.
.It Fl B Ar byte-order
Specify the metadata byte order of the file system to be created.
Valid byte orders are
.Sq be
and
.Sq le .
If no byte order is specified, the file system is created in host
byte order.
.It Fl b Ar block-size
The block size of the file system, in bytes.
It must be a power of two.
The smallest allowable size is 4096 bytes.
The default size depends upon the size of the file system:
.Pp
.Bl -tag -width "file system size" -compact -offset indent
.It Sy "file system size"
.Ar block-size
.It \*[Lt] 20 MB
4 KB
.It \*[Lt] 1024 MB
8 KB
.It \*[Gt]= 1024 MB
16 KB
.El
.It Fl d Ar maxbsize
Set the maximum extent size to
.Ar maxbsize .
.It Fl e Ar maxbpg
This indicates the maximum number of blocks any single file can
allocate out of a cylinder group before it is forced to begin
allocating blocks from another cylinder group.
The default is about one quarter of the total blocks in a cylinder group.
See
.Xr tunefs 8
for more details on how to set this option.
.It Fl F
Create a file system image in
.Ar special .
The file system size needs to be specified with
.Dq Fl s Ar size .
No attempts to use or update the disk label will be made.
.It Fl f Ar frag-size
The fragment size of the file system in bytes.
It must be a power of two ranging in value between
.Ar block-size Ns /8
and
.Ar block-size .
The optimal
.Ar block-size : Ns Ar frag-size
ratio is 8:1.
Other ratios are possible, but are not recommended,
and may produce unpredictable results.
The default size depends upon the size of the file system:
.Pp
.Bl -tag -width "file system size" -compact -offset indent
.It Sy "file system size"
.Ar frag-size
.It \*[Lt] 20 MB
0.5 KB
.It \*[Lt] 1024 MB
1 KB
.It \*[Gt]= 1024 MB
2 KB
.El
.It Fl g Ar avgfilesize
The expected average file size for the file system.
.It Fl h Ar avgfpdir
The expected average number of files per directory on the file system.
.It Fl I
Do not require that the file system type listed in the disk label is
.Ql 4.2BSD
or
.Ql Apple UFS .
.It Fl i Ar bytes-per-inode
This specifies the density of inodes in the file system.
If fewer inodes are desired, a larger number should be used;
to create more inodes a smaller number should be given.
The default is to create an inode for every
.Pq 4 * Ar frag-size
bytes of data space:
.Pp
.Bl -tag -width "file system size" -compact -offset indent
.It Sy "file system size"
.Ar bytes-per-inode
.It \*[Lt] 20 MB
2 KB
.It \*[Lt] 1024 MB
4 KB
.It \*[Gt]= 1024 MB
8 KB
.El
.It Fl m Ar free-space
The percentage of space reserved from normal users; the minimum free
space threshold.
The default value used is 5%.
See
.Xr tunefs 8
for more details on how to set this option.
.It Fl N
Causes the file system parameters to be printed out
without really creating the file system.
.It Fl n Ar inodes
This specifies the number of inodes for the filesystem.
If both
.Fl i
and
.Fl n
are specified then
.Fl n
takes precedence.
.It Fl O Ar filesystem-format
Select the filesystem-format
.Bl -tag -width 3n -offset indent -compact
.It 0
4.3BSD; This option is primarily used to build root file systems that can be
understood by older boot ROMs.
.It 1
FFSv1; normal fast-filesystem (default).
.It 2
FFSv2; enhanced fast-filesystem (suited for more than 1 Terabyte capacity,
access control lists).
.El
To create an LFS filesystem see
.Xr newfs_lfs 8 .
To create a Linux Ext2 filesystem see
.Xr newfs_ext2fs 8 .
.It Fl o Ar optimization
Optimization preference; either
.Dq space
or
.Dq time .
The file system can either be instructed to try to minimize the time spent
allocating blocks, or to try to minimize the space fragmentation on the disk.
If the value of minfree (see above) is less than 5%,
the default is to optimize for space;
if the value of minfree is greater than or equal to 5%,
the default is to optimize for time.
See
.Xr tunefs 8
for more details on how to set this option.
.It Fl s Ar size
The size of the file system in sectors.
An
.Sq s
suffix will be interpreted as the number of sectors (the default).
All other suffixes are interpreted as per other numeric arguments,
except that the number is converted into sectors by dividing by the
sector size (as specified by
.Fl S Ar secsize )
after suffix interpretation.
.Pp
If no
.Fl s Ar size
is specified then the filesystem size defaults to that of the partition, or,
if
.Fl F
is specified, the existing file.
.Pp
If
.Ar size
is negative the specified size is subtracted from the default size
(reserving space at the end of the partition).
.It Fl T Ar disk-type
Uses information for the specified disk from
.Pa /etc/disktab
instead of trying to get the information from the disk label.
.It Fl v Ar volname
This specifies that an Apple UFS filesystem should be created
with the given volume name.
.It Fl V Ar verbose
This controls the amount of information written to stdout:
.Bl -tag -width 3n -offset indent -compact
.It 0
No output
.It 1
Overall size and cylinder group details.
.It 2
A progress bar (dots ending at right hand margin).
.It 3
The first few super-block backup sector numbers are displayed before the
progress bar.
.It 4
All the super-block backup sector numbers are displayed (no progress bar).
.El
The default is 3.
If
.Fl N
is specifed
.Nm
stops before outputting the progress bar.
.It Fl Z
Pre-zeros the file system image created with
.Fl F .
This is necessary if the image is to be used by
.Xr vnd 4
(which doesn't support file systems with
.Sq holes ) .
.El
.Pp
The following option overrides the standard sizes for the disk geometry.
The default value is taken from the disk label.
Changing this default is useful only when using
.Nm
to build a file system whose raw image will eventually be used on a
different type of disk than the one on which it is initially created
(for example on a write-once disk).
Note that changing this value from its default will make
it impossible for
.Xr fsck_ffs 8
to find the alternative superblocks if the standard superblock is lost.
.Bl -tag -width Fl
.It Fl S Ar sector-size
The size of a sector in bytes (almost never anything but 512).
Defaults to 512.
.El
.Sh NOTES
The file system is created with
.Sq random
inode generation numbers to improve NFS security.
.Pp
The owner and group ids of the root node of the new file system
are set to the effective uid and gid of the user initializing
the file system.
.Pp
For the
.Nm
command to succeed,
the disk label should first be updated such that the fstype field for the
partition is set to
.Ql 4.2BSD
or
.Ql Apple UFS ,
unless
.Fl F
or
.Fl I
is used.
.Pp
To create and populate a filesystem image within a file use the
.Xr makefs 8
utility.
.Pp
The partition size is found using
.Xr fstat 2
not by inspecting the disklabel.
The block size and fragment size will be written back to the disklabel
only if the last character of
.Ar special
references the same partition as the minor device number.
that provide disk like block and character devices.
.Sh SEE ALSO
.Xr fstat 2 ,
.Xr disktab 5 ,
.Xr fs 5 ,
.Xr disklabel 8 ,
.Xr diskpart 8 ,
.Xr dumpfs 8 ,
.\" .Xr format 8 ,
.Xr fsck_ffs 8 ,
.\" .Xr fsirand 8 ,
.Xr makefs 8 ,
.Xr mount 8 ,
.Xr mount_mfs 8 ,
.Xr newfs_ext2fs 8 ,
.Xr newfs_lfs 8 ,
.Xr newfs_msdos 8 ,
.Xr tunefs 8
.Rs
.%A M. McKusick
.%A W. Joy
.%A S. Leffler
.%A R. Fabry
.%T A Fast File System for UNIX ,
.%J ACM Transactions on Computer Systems 2
.%V 3
.%P pp 181-197
.%D August 1984
.%O (reprinted in the BSD System Manager's Manual)
.Re
.Sh HISTORY
The
.Nm
command appeared in
.Bx 4.2 .