NetBSD-5.0.2/share/examples/isdn/isdnd.rc.sample
#------------------------------------------------------------------------------
#
# example of a configuration file for the isdn daemon
# ---------------------------------------------------
#
# $Id: isdnd.rc.sample,v 1.6 2006/11/24 21:23:07 wiz Exp $
#
# $NetBSD: isdnd.rc.sample,v 1.6 2006/11/24 21:23:07 wiz Exp $
#
# last edit-date: [Wed Jul 19 09:59:42 2000]
#
# NOTICE:
# =======
# This configuration file is an EXAMPLE only and MUST be edited
# carefully to get the desired results!
#
# Please read the "isdnd.rc" manual page (execute "man isdnd.rc")
# for reference !
#
#------------------------------------------------------------------------------
#==============================================================================
# SYSTEM section: isdnd global configuration parameters
#==============================================================================
system
# accounting
# ----------
acctall = on # generate info for everything
acctfile = /var/log/isdnd.acct # name & location of accounting file
useacctfile = yes # generate accouting info to file
# monitor
# -------
monitor-allowed = yes # global switch: monitor on/off
monitor-port = 451 # default monitor TCP port
# Monitor rights are granted due to the most specific host/net spec, i.e. in
# the example below host 192.168.1.2 will have the rights specified on that
# line, even so it belongs to net 192.168.1.0/24 as well.
#
# A monitor specification may either be:
#
# - the name of a local (UNIX-domain) socket; this MUST start with a "/"
monitor = "/var/run/isdn-monitor"
monitor-access = fullcmd
monitor-access = channelstate, logevents
monitor-access = callin, callout
#
# - a dotted-quad host spec
monitor = "192.168.1.2"
monitor-access = restrictedcmd, channelstate, callin, callout
#
# - a dotted-quad net spec with "/len" (CIDR-style) netmask spec
monitor = "192.168.1.0/24"
monitor-access = restrictedcmd, channelstate, callin, callout
#
# - a resolveable host name
monitor = "rumolt"
monitor-access = restrictedcmd, channelstate, callin, callout
#
# - a resolveable net name with "/len" netmask (s.a.) appended
monitor = "up-vision-net/24"
monitor-access = restrictedcmd, channelstate, callin, callout
# ratesfile
# ---------
ratesfile = /etc/isdn/isdnd.rates # name & location of rates file
# regular expression pattern matching
# -----------------------------------
#regexpr = "connected.*KTS" # look for matches in log messages
#regprog = connectKTS # execute program when match is found
# realtime priority section
# -------------------------
rtprio = 25 # modify isdnd's process priority
#==============================================================================
# entry section: IP over ISDN example - i call back the remote end
#==============================================================================
entry
name = I4BIP # name for reference. This name will
# be used in the logfile to identfy
# this entry.
# the network or telephone device
# the data traffic should be routed to:
usrdevicename = irip # irip, ippp, isdntel, isdnbchan
usrdeviceunit = 0 # unit number
autoupdown = no # If this entry is missing (or set
# to "yes") isdnd will mark the
# interface UP on startup, which
# may result in an immediate connection
# attempt (depending on network
# setup). If set to "no" this will
# not happen and a manual
# ifconfig irip0 up
# will be needed to make the interface
# useable.
# Note: if there is no IP configure via
# /etc/ifconfig.irip0
# isdnd will note the missing
# IP configuration and leave the
# interface alone.
# the ISDN controller number to be
# used for this entry:
isdncontroller = -1 # contoller to use or -1 to use any
isdnchannel = -1 # channel (1/2) to use or 0 or -1 for any
# incoming only, outgoing only or both:
direction = inout # in, out, inout
# numbers used to verify a DIAL IN:
local-phone-incoming = 321 # this is my number
remote-phone-incoming = 0123456789 # this one can call in
# numbers used at DIAL OUT time:
local-phone-dialout = 321 # this is my number
remote-phone-dialout = 00123456789 # i call this remote number
# in case i have several remote
# telephone numbers specified, this
# is used to specify which one is
# used next on dial fail or retry:
remdial-handling = first # first, last or next
# what happenes if someone dials in:
dialin-reaction = callback # accept, reject, ignore, answer, callback
# normal dialout or do i call back:
dialout-type = normal # normal / calledback
callbackwait = 1 # no of secs to wait before calling back
# type of protocol on the B-channel:
# hdlc must be specified for IP (the
# irip and ippp drivers), raw must be
# specified for telephone answering
b1protocol = hdlc # hdlc, raw
# shorthold mode and idle time
# configuration:
ratetype = 0 # ratesfile entry to use
unitlength = 90 # unitlength to assume
unitlengthsrc = rate # none, rate, cmdl, conf, aocd
idletime-incoming = 120 # incoming call idle timeout
idletime-outgoing = 60 # outgoing call idle timeout
earlyhangup = 5 # time to hangup before an expected
# next charging unit will occur
# retry and recovery parameters
dialretries = 3 # # of dial retries
dialrandincr = off # random dial increment time
recoverytime = 5 # time to wait between 2 dial tries
usedown = off # set i/f down
downtries = 5 # retry cycles before set down
downtime = 30 # time to be in down before going up
connectprog = "ip-up" # run /etc/isdn/ip-up when an interface
# has established its network connection.
# example parameters are:
# /etc/isdn/ip-up -d isp0 -f up -a 192.110.12.14
disconnectprog = "ip-down" # like connectprog, but run after the connection
# is closed (ISDN layer down). The actual
# interface address might not be known
# any more. example parameters are:
# /etc/isdn/ip-up -d isp0 -f down -a 0.0.0.0
#==============================================================================
# entry section: IP over ISDN example - i am called back by the remote end
#==============================================================================
entry
name = I4BIP1 # name for reference
usrdevicename = irip # irip, isdntel, isdnbchan
usrdeviceunit = 1 # unit number
isdncontroller = 0 # contoller to use or -1 to use any
isdnchannel = -1 # channel (1/2) to use or 0 or -1 for any
# numbers used to DIAL OUT
remote-phone-dialout = 00401234567 # remote number to dial
local-phone-dialout = 38 # our number to tell remote
# numbers used to verify at DIAL IN
local-phone-incoming = 38 # we take calls for this local number
remote-phone-incoming = 00401234567 # we take calls from this remote machine
b1protocol = hdlc # hdlc, raw
ratetype = 0 # city
unitlength = 90 # default unit length
earlyhangup = 5 # safety zone
unitlengthsrc = aocd # none, rate, cmdl, conf, aocd
dialin-reaction = accept # accept, reject, ignore, anwer, callback
dialout-type = calledback # normal or calledback
dialretries = 3
recoverytime = 3
calledbackwait = 20
dialrandincr = off
usedown = off
downtries = 2
downtime = 30
idletime-incoming = 300
idletime-outgoing = 30
#==============================================================================
# entry section: answering machine example
#==============================================================================
entry
name = I4BTEL # name for reference
usrdevicename = isdntel # irip, ippp, isdntel, isdnbchan
usrdeviceunit = 0 # unit number
isdncontroller = 0 # contoller to use or -1 to use any
isdnchannel = -1 # channel (1/2) to use or 0 or -1 for any
# numbers used to verify at DIAL IN
local-phone-incoming = 456 # this is my number
remote-phone-incoming = * # anyone can call in
dialin-reaction = answer # accept, reject, ignore, answer
answerprog = answer # program to run
b1protocol = raw # hdlc, raw
idletime-incoming = 5 # 5 seconds idle timeout
#=======================================================================
# entry section: sync PPP example using the isp device
#======================================================================
entry
name = I4BPPP # name for reference
usrdevicename = ippp # irip, isdntel, isdnbchan
usrdeviceunit = 0 # unit number
isdncontroller = 0 # controller to use or -1 to use any
isdnchannel = -1 # channel to use or -1 to use any
# numbers used to verify at DIAL IN
local-phone-incoming = 1234 # we take calls for this local number
remote-phone-incoming = 5678 # we take calls from this remote machine
# numbers used to DIAL OUT
remote-phone-dialout = 5678 # remote number to dial
local-phone-dialout = 1234 # our number to tell remote
# used next on dial fail or retry:
remdial-handling = first # first, last or next
# what happenes if someone dials in:
dialin-reaction = accept # accept, reject, ignore, answer, callback
# normal dialout or do i call back:
dialout-type = normal # normal / calledback
# type of protocol on the B-channel:
# hdlc must be specified for IP (the
# irip and ippp drivers), raw must be
# specified for telephone answering
ppp-expect-auth = chap # authentication method used by the
# remote side to prove its identity,
# one of: none, pap or chap
ppp-expect-name = LetMeIn # name sent in pap or chap message
ppp-expect-password = Geheim # password that must be sent by the
# remote side
ppp-send-auth = chap # authentication method that we have
# to use to be accepted by the remote
# side, one of: none, pap or chap
ppp-send-name = ItsMe # our PPP login name at the remote site
ppp-send-password = WhoKnows # the password the remote side expects
# us to send
ppp-auth-paranoid = yes # do we expect the remote side to prove
# its identity even if we dial out
ppp-auth-rechallenge = yes # chap only: rechallenge once in a while
b1protocol = hdlc # hdlc, raw
idletime-incoming = 240 # incoming call idle timeout
idletime-outgoing = 30 # outgoing call idle timeout
ratetype = 0 # city rate
unitlength = 90 # default unit length
unitlengthsrc = rate # none, rate, cmdl, conf, aocd
dialretries = 3 # no of retries
dialrandincr = on # increase time between dials
recoverytime = 25 # wait between dials
usedown = off # do not use soft up/down
downtries = 2
downtime = 30
#==============================================================================
# example of a configuration file for the isdn daemon and userland ppp.
# (see the ppp setup examples in i4b's user-ppp dir and FAQ item 22 !)
#==============================================================================
entry
name = userppp0 # name of entry
usrdevicename = rbch # use the raw b channel access device
usrdeviceunit = 0 # unit 0
isdncontroller = 0 # use isdn controller 0
isdnchannel = -1 # use any channel on this controller
local-phone-incoming = 01494723626
remote-phone-incoming = *
local-phone-dialout = 01494723626
remote-phone-dialout = 01494723626 # ppp(8) will override this
remdial-handling = first
dialin-reaction = ignore # no dialins allowed
dialout-type = normal
b1protocol = hdlc # b channel layer 1 protocol
idletime-incoming = 900 # Should be larger than ppps timeout
idletime-outgoing = 900 # Should be larger than ppps timeout
ratetype = 0
unitlength = 90
unitlengthsrc = rate
dialretries = 1
dialrandincr = on
recoverytime = 25
usedown = off
downtries = 2
downtime = 30
entry
name = userppp1
usrdevicename = rbch
usrdeviceunit = 1
isdncontroller = 0
isdnchannel = -1
local-phone-incoming = 01494723626
remote-phone-incoming = *
local-phone-dialout = 01494723626
remote-phone-dialout = 01494723626 # ppp(8) will override this
remdial-handling = first
dialin-reaction = accept
dialout-type = normal
b1protocol = hdlc
idletime-incoming = 900 # Should be larger than ppps timeout
idletime-outgoing = 900 # Should be larger than ppps timeout
ratetype = 0
unitlength = 90
unitlengthsrc = rate
dialretries = 1
dialrandincr = on
recoverytime = 25
usedown = off
downtries = 2
downtime = 30
# EOF #########################################################################