NetBSD-5.0.2/share/man/man4/man4.i386/apm.4

Compare this file to the similar file:
Show the results in this format:
.\" Copyright (c) 1995,1996 John T. Kohl
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR `AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
.\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
.\" DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
.\" INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
.\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
.\" SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
.\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.\"   $NetBSD: apm.4,v 1.17 2003/06/27 18:27:58 wiz Exp $
.\"
.Dd May 18, 1996
.Dt APM 4 i386
.Os
.Sh NAME
.Nm apm
.Nd
Advanced Power Management pseudo-device driver
.Sh SYNOPSIS
.Cd "apm0 at mainbus0"
.In machine/apmvar.h
.Pa /dev/apm
.Sh DESCRIPTION
The
.Nm apm
driver provides support for the Advanced Power Management features of
some i386 system BIOSes.  The driver supports the Advanced Power
Management (APM) BIOS Interface Specification (revision 1.2), published
jointly by the Intel Corporation and the Microsoft Corporation.
.Pp
The APM driver's behavior may be adjusted by specifying any of the
following kernel configuration options:
.Bl -tag -width indent -compact
.It Dv APM_NO_IDLE
Do not call the BIOS CPU idle function from the system idle loop.  (Some
systems will hang on certain device accesses, such as sound cards or
floppy diskette drives, without this option)
.It Dv APM_V10_ONLY
Use only the APM revision 1.0 specification calls.  (Some systems do not
implement APM v1.1 very well, and generate weird events instead of the
expected events when the system suspend key is pressed.)
.It Dv APM_NO_V12
Don't attach to the BIOS as APM v1.2 compliant device.
(In case there are problems with v1.2 support.)
.It Dv APM_NO_STANDBY
Do not attempt to put the system into standby mode.
.It Dv APM_NO_POWEROFF
Do not attempt to turn off power when halting the system.
.It Dv APM_FORCE_64K_SEGMENTS
Force the length of the APM BIOS code and data segments to 64KB.
.It Dv APM_ALLOW_BOGUS_SEGMENTS
Allow the use of data segments which are in unexpected locations.
.It Dv APMDEBUG
Enable kernel printout of events received from the APM BIOS.
.It Dv APMCALLDEBUG
Enable kernel printout of every call to the APM BIOS (this is very noisy).
.It Dv APM_POWER_PRINT
Print power state on console at
.Dv APM_POWER_CHANGE
events.  (Since it increases
.Xr syslogd 8 Ns 's
activity, it may consume increased
battery power.  Some systems generate the events too frequently,
and printing the status may disturb single-user operations.)
.It Dv APM_DISABLE_INTERRUPTS
Set this to zero if you don't want the kernel to disable interrupts
before calling the BIOS. This is required for most IBM ThinkPads, and
some other newer laptops. A good indication that you need this is that
the machine hangs just after resuming from suspended state. It's
unclear if doing this has negative effects on older BIOS, therefore it
defaults to one (i.e interrupts are disabled).
.El
.Pp
If no processes are holding open file descriptors to the APM device, the
driver will process the APM BIOS events itself.  If a process has the
device open for write, the driver defers all suspend and standby
processing to the user process as long as there is sufficient queue
space to store the event for the process.  If the device is only open
for read, the driver will report events but handle them itself.
.Pp
The APM device may be opened by multiple readers but only one
writer. Multiple readers may fetch the status with
.Xr ioctl 2
without worrying about interference, but they must cooperate to share
events as only a single event queue is provided.  The device may only be
.Xr select 2 Ns ed
or manipulated with
.Xr ioctl 2 ;
.Xr read 2
and
.Xr write 2
are not supported.
The
.Xr ioctl 2
calls supported are:
.Bl -tag -width indent -compact
.It Dv APM_IOC_SUSPEND
Initiate an APM suspend mode.  This is a deep sleep mode which powers down
most devices.  The device must be open for writing for this command to succeed.
.It Dv APM_IOC_STANDBY
Initiate an APM standby mode.  This is a light sleep mode from which the
system can quickly restore normal operation.  The device must be open
for writing for this command to succeed.
.It Dv APM_IOC_GETPOWER
Fetch the current power status into an
.Va apm_power_info
structure.
.Bd -literal
struct apm_power_info {
	u_char battery_state;
	u_char ac_state;
	u_char battery_life;
	u_char spare1;
	u_int minutes_left;		/* estimate */
	u_int nbattery;
	u_int batteryid;
	u_int spare2[4];
};
.Ed
.Pp
The structure should be zeroed (except for
.Va batteryid )
before
being passed.
.Pp
.Va battery_state
is one of
.Dv APM_BATT_HIGH ,
.Dv APM_BATT_LOW ,
.Dv APM_BATT_CRITICAL ,
.Dv APM_BATT_CHARGING ,
or
.Dv APM_BATT_UNKNOWN .
.Pp
.Va ac_state
is one of
.Dv APM_AC_OFF ,
.Dv APM_AC_ON ,
.Dv APM_AC_BACKUP ,
or
.Dv APM_AC_UNKNOWN .
.Pp
.Va battery_life
is the percentage estimated remaining normal battery life (or 0 if the
BIOS cannot provide an estimate).
.Pp
.Va minutes_left
is an estimated remaining lifetime (or 0 if the BIOS cannot provide an
estimate).
.Pp
.Va nbattery
is the number of batteries in the system. If the system is using APM
v1.1 or earlier, nbattery will always return 0.
.Pp
Batteries are numbered from a base of 1.
If the passed value of
.Va batteryid
is 0, the returned values will reflect the percentage remaining, minutes
left, etc. of all of the system's batteries taken together.
If the passed value of
.Va batteryid
is nonzero, the return values will reflect the indicated
battery's percentage remaining, minutes left, etc.
It is an error to set
.Va batteryid
to a value greater than that returned by
.Va nbattery .
If the system is using APM v1.1 or earlier, individual batteries
cannot be queried, and
.Va nbattery
will always return 0.
.Va batteryid
is always set to the passed value upon return.
.It Dv APM_IOC_NEXTEVENT
Fetch the next event from the APM BIOS into an
.Va apm_event_info
structure.  If no more events are ready, this will return
.Dv EAGAIN .
.Bd -literal
struct apm_event_info {
      u_int type;
      u_int index;
      u_int spare[8];
};
.Ed
.Va type
is one of the APM event types (APM_STANDBY_REQ through
APM_SYS_STANDBY_RESUME).
.Va index
is the ordinal event sequence number.
.El
.Sh SEE ALSO
.Xr apmd 8
.Sh REFERENCES
Advanced Power Management (APM) BIOS Interface Specification (Revision
1.1), Intel Corporation and Microsoft Corporation.  Intel order number
241704-001; Microsoft part number 781-110-X01.
.Sh HISTORY
The
.Nm apm
pseudo-device driver appeared in
.Nx 1.3 .