NetBSD-5.0.2/share/man/man9/callout.9

Compare this file to the similar file:
Show the results in this format:
.\"	$NetBSD: callout.9,v 1.19 2008/04/30 13:10:58 martin Exp $
.\"
.\" Copyright (c) 2000, 2003 The NetBSD Foundation, Inc.
.\" All rights reserved.
.\"
.\" This code is derived from software contributed to The NetBSD Foundation
.\" by Jason R. Thorpe.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd December 29, 2007
.Dt CALLOUT 9
.Os
.Sh NAME
.Nm callout_init ,
.Nm callout_destroy ,
.Nm callout_reset ,
.Nm callout_schedule ,
.Nm callout_setfunc ,
.Nm callout_stop ,
.Nm callout_expired ,
.Nm callout_invoking ,
.Nm callout_ack
.Nd execute a function after a specified length of time
.Sh SYNOPSIS
.In sys/callout.h
.Ft void
.Fn "callout_init" "callout_t *c" "u_int flags"
.Ft void
.Fn "callout_destroy" "callout_t *c"
.Ft void
.Fn "callout_reset" "callout_t *c" "int ticks" \
    "void (*func)(void *)" "void *arg"
.Ft void
.Fn "callout_schedule" "callout_t *c" "int ticks"
.Ft void
.Fn "callout_setfunc" "callout_t *c" "void (*func)(void *)" "void *arg"
.Ft bool
.Fn "callout_stop" "callout_t *c"
.Ft bool
.Fn "callout_pending" "callout_t *c"
.Ft bool
.Fn "callout_expired" "callout_t *c"
.Ft bool
.Fn "callout_active" "callout_t *c"
.Ft bool
.Fn "callout_invoking" "callout_t *c"
.Ft bool
.Fn "callout_ack" "callout_t *c"
.Sh DESCRIPTION
The
.Nm callout
facility provides a mechanism to execute a function at a given time.
The timer is based on the hardclock timer which ticks
.Dv hz
times per second.
The function is called at softclock interrupt level.
.Pp
Clients of the
.Nm callout
facility are responsible for providing pre-allocated
callout structures, or
.Dq handles .
The
.Nm callout
facility replaces the historic
.Ux
functions
.Fn timeout
and
.Fn untimeout .
.Pp
The
.Fn callout_init
function initializes the callout handle
.Fa c
for use.
No operations can be performed on the callout before it is initialized.
If the
.Fa flags
argument is
.Dv CALLOUT_MPSAFE ,
the handler will be called without getting the global kernel lock.
In this case it should only use functions that are multiprocessor
safe.
.Pp
.Fn callout_destroy
destroys the callout, preventing further use.
It is provided as a diagnostic facility intended to catch bugs.
To ensure future compatibility,
.Fn callout_destroy
should always be called when the callout is no longer required (for instance,
when a device is being detached).
.Pp
The
.Fn callout_reset
function resets and starts the timer associated with the callout handle
.Fa c .
When the timer expires after
.Fa ticks Ns No /hz
seconds, the function specified by
.Fa func
will be called with the argument
.Fa arg .
If the timer associated with the callout handle is already running,
the callout will simply be rescheduled to execute at the newly specified
time.
Once the timer is started, the callout handle is marked as
.Em PENDING .
Once the timer expires,
the handle is marked as
.Em EXPIRED
and
.Em INVOKING ,
and the
.Em PENDING
status is cleared.
.Pp
The
.Fn callout_setfunc
function sets the function and argument of the callout handle
.Fa c
to
.Fa func
and
.Fa arg
respectively.
The callout handle must already be initialized.
If a callout will always be used with the same function and argument,
then
.Fn callout_setfunc
used in conjunction with
.Fn callout_schedule
is slightly more efficient than using
.Fn callout_reset .
.Pp
The
.Fn callout_stop
function stops the timer associated the callout handle
.Fa c .
The
.Em PENDING
and
.Em EXPIRED
status for the callout handle is cleared.
It is safe to call
.Fn callout_stop
on a callout handle that is not pending, so long as it is initialized.
. Fn callout_stop
will return a non-zero value if the callout was
.Em EXPIRED .
.Pp
The
.Fn callout_pending
function tests the
.Em PENDING
status of the callout handle
.Fa c .
A
.Em PENDING
callout is one that has been started and whose function has not yet
been called.
Note that it is possible for a callout's timer to have expired without
its function being called if interrupt level has not dropped low enough
to let softclock interrupts through.
Note that it is only safe to test
.Em PENDING
status when at softclock interrupt level or higher.
.Pp
The
.Fn callout_expired
function tests to see if the callout's timer has expired and its
function called.
.Pp
The
.Fn callout_active
function returns true if a timer has been started but not explicitly stopped,
even if it has already fired.
.Fn callout_active foo
is logically the same as
.Fn callout_pending foo
||
.Fn callout_expired foo ;
it is implemented as a separate function for compatibility with
.Fx
and for the special case of
.Fn TCP_TIMER_ISARMED .
Its use is not recommended.
.Pp
The
.Fn callout_invoking
function tests the
.Em INVOKING
status of the callout handle
.Fa c .
This flag is set just before a callout's function is being called.
Since the priority level is lowered prior to invocation of the
callout function, other pending higher-priority code may run before
the callout function is allowed to run.
This may create a race condition if this higher-priority code
deallocates storage containing one or more callout structures whose
callout functions are about to be run.
In such cases, one technique to prevent references to deallocated
storage would be to test whether any callout functions are in the
.Em INVOKING
state using
.Fn callout_invoking ,
and if so, to mark the data structure and defer storage
deallocation until the callout function is allowed to run.
For this handshake protocol to work, the callout function will
have to use the
.Fn callout_ack
function to clear this flag.
.Pp
The
.Fn callout_ack
function clears the
.Em INVOKING
state in the callout handle
.Fa c .
This is used in situations where it is necessary to protect against
the race condition described under
.Fn callout_invoking .
.Sh SEE ALSO
.Xr hz 9
.Sh HISTORY
The
.Nm callout
facility was implemented by Artur Grabowski and Thomas Nordin, based
on the work of G. Varghese and A. Lauck, described in the paper
Hashed and Hierarchical Timing Wheels: Data Structures for the
Efficient Implementation of a Timer Facility
in the Proceedings of the 11th ACM Annual Symposium on Operating System
Principles, Austin, Texas, November 1987.
It was adapted to the
.Nx
kernel by Jason R. Thorpe.