NetBSD-5.0.2/sys/arch/acorn32/conf/EB7500ATX
# $NetBSD: EB7500ATX,v 1.33 2008/07/31 07:40:59 simonb Exp $
#
# EB7500ATX --- NetBSD/acorn32 complete configuration
#
# This machine description file is used to generate the default NetBSD
# kernel. This generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page. For further information about kernel options
# for this architecture, see the options(4) man page. For an explanation
# of each device driver in this file see the section 4 man page for the
# device.
include "arch/acorn32/conf/std.acorn32"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
#ident "EB7500ATX-$Revision: 1.33 $"
# estimated number of users
maxusers 32
# Standard system options
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
#options NTP # NTP phase/frequency locked loop
# CPU options
options CPU_ARM7 # Support the ARM7 core
# FPA options
#options ARMFPE # ARM Ltd FPE
options EB7500ATX # Define in case needed
# File systems
file-system FFS # UFS
#file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network file system
file-system ADOSFS # AmigaDOS-compatible file system
file-system EXT2FS # second extended file system (linux)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system FILECORE # Acorn filecore file system
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay filesystem
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
file-system PTYFS # /dev/pts/N support
# File system options
options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independant support
options SOFTDEP # FFS soft updates support.
options WAPBL # File system journaling support - Experimental
options NFSSERVER
#options FFS_NO_SNAPSHOT # No FFS snapshot support
# Networking options
options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
#options PIM # Protocol Independent Multicast
options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
options NETATALK # AppleTalk networking
options PFIL_HOOKS # pfil(9) packet filter hooks
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
#options ALTQ # Manipulate network interfaces' output queues
#options ALTQ_BLUE # Stochastic Fair Blue
#options ALTQ_CBQ # Class-Based Queueing
#options ALTQ_CDNR # Diffserv Traffic Conditioner
#options ALTQ_FIFOQ # First-In First-Out Queue
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
#options ALTQ_HFSC # Hierarchical Fair Service Curve
#options ALTQ_LOCALQ # Local queueing discipline
#options ALTQ_PRIQ # Priority Queueing
#options ALTQ_RED # Random Early Detection
#options ALTQ_RIO # RED with IN/OUT
#options ALTQ_WFQ # Weighted Fair Queueing
# Compatibility options
options COMPAT_43 # 4.3BSD compatibility.
options COMPAT_40 # NetBSD 4.0 compatibility.
options COMPAT_30 # NetBSD 3.0 compatibility.
options COMPAT_20 # NetBSD 2.0 compatibility.
options COMPAT_16 # NetBSD 1.6 compatibility.
options COMPAT_15 # NetBSD 1.5 compatibility.
options COMPAT_14 # NetBSD 1.4 compatibility.
options COMPAT_13 # NetBSD 1.3 compatibility.
options COMPAT_12 # NetBSD 1.2 compatibility.
#options COMPAT_11 # NetBSD 1.1 compatibility.
#options COMPAT_10 # NetBSD 1.0 compatibility.
#options COMPAT_09 # NetBSD 0.9 compatibility.
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
# Shared memory options
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
#options SEMMNI=10 # number of semaphore identifiers
#options SEMMNS=60 # number of semaphores in system
#options SEMUME=10 # max number of undo entries per process
#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V-like memory sharing
options SHMMAXPGS=1024 # 1024 pages is the default
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
# Device options
options MEMORY_DISK_HOOKS # boottime setup of ramdisk
#options MEMORY_DISK_ROOT_SIZE=4100 # Size in blocks
#options MEMORY_DISK_IS_ROOT # use memory disk as root
# Miscellaneous kernel options
options KTRACE # system call tracing, a la ktrace(1)
options IRQSTATS # manage IRQ statistics
options LKM # loadable kernel modules
options KMEMSTATS # kernel memory statistics
#options SCSIVERBOSE # Verbose SCSI errors
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
options SYMTAB_SPACE=250000
# Enable experimental buffer queue strategy for better responsiveness under
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
#options BUFQ_READPRIO
#options BUFQ_PRIOCSCAN
# Development and Debugging options
#options ARM700BUGTRACK # track the ARM700 swi bug
#options PORTMASTER # Enable PortMaster only options
options DIAGNOSTIC # internal consistency checks
#options PMAP_DEBUG # Enable pmap_debug_level code
options DDB # in-kernel debugger
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
#makeoptions DEBUG="-g" # compile full symbol table
config netbsd root on ? type ?
options NFS_BOOT_DHCP
# serial console ... the conaddr is hardcoded as the pioc address + 4*com offset
# this really be fixed some day
#options COMCONSOLE,CONADDR="0x210000+4*0x3f8",CONUNIT=0,CONSPEED=9600
# The main bus device
mainbus0 at root
# The boot CPU
cpu0 at mainbus?
# The IOMD
iomd0 at mainbus?
# system clock via IOMD
clock* at iomd?
# IIC bus device
#iomdiic* at iomd?
#iic* at iomdiic?
# RTC device via IIC bus
#pcfrtc* at iic? addr 0x50
# VIDC device
vidc0 at mainbus?
# WSCONS
# ws console uses DUMB, SUN or VT100 terminal emulation
#options WSEMUL_NODUMB
#options WSEMUL_SUN
options WSEMUL_VT100
#options WSDISPLAY_COMPAT_RAWKBD
#options FONT_BOLD8x16
#options FONT_GALLANT12x22 # Very nice font
#options FONT_LUCIDA16x29
#options FONT_OMRON12x20 # looks funny
#options FONT_QVSS8x15 # broken ?
options FONT_SONY12x25 # looks like VT220 font
options FONT_SONY8x16 # not tested
#options FONT_VT220L8x8 # 8x8 font as in Arch. cons
#options FONT_VT220L8x16 # 8x(2x8) font as in Arch. cons
#options FONT_VT220L8x10 # not tested
#options FONT_VT220L8x20 # not tested
vidcvideo0 at vidc? # wscons driver for VIDC
wsdisplay* at vidcvideo? console ? # display itself
iomdkbc* at iomd? # IOMD keyboard/mouse interface
pckbd* at iomdkbc? slot ? # PS/2 keyboard
options PCKBD_LAYOUT=KB_UK
wskbd* at pckbd?
pms* at iomdkbc? slot ? # PS/2 mouse
wsmouse* at pms?
#qms* at iomd? # ws quadmouse driver
#wsmouse* at qms? # wsmouse on ws quadmouse
pseudo-device wsmux
# Audio device
vidcaudio0 at vidc?
audio* at vidcaudio0
rsbus0 at mainbus?
wdc* at rsbus? # eb7500atx build in ide
atabus* at ata?
wd* at atabus? drive ?
atapibus* at atapi?
# Builtin cs8920M Network adaptor
cs* at rsbus?
# Builtin DS1687 clock
# Not functioning (yet)
#ds1687rtc* at rsbus?
pseudo-device loop 1 # network loopback
pseudo-device bpfilter # packet filter
pseudo-device sl # CSLIP
pseudo-device ppp # PPP
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device tun # network tunneling over tty
pseudo-device tap # virtual Ethernet
#pseudo-device gre # generic L3 over IP tunnel
#pseudo-device ipfilter 1 # ip filter
pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith # IPv[46] tcp relay translation i/f
pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
#pseudo-device strip # STarmode Radio IP (Metricon Ricochet)
pseudo-device vlan # IEEE 802.1q encapsulation
pseudo-device bridge # simple inter-network bridging
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
pseudo-device pty # pseudo-terminals
pseudo-device vnd # disk-like interface to files
pseudo-device ccd 2 # concatenated disk devices
#pseudo-device cgd 4 # cryptographic disk devices
pseudo-device raid 8 # RAIDframe disk driver
options RAID_AUTOCONFIG # auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
# options RF_INCLUDE_EVENODD=1
# options RF_INCLUDE_RAID5_RS=1
# options RF_INCLUDE_PARITYLOGGING=1
# options RF_INCLUDE_CHAINDECLUSTER=1
# options RF_INCLUDE_INTERDECLUSTER=1
# options RF_INCLUDE_PARITY_DECLUSTERING=1
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
#pseudo-device fss 4 # file system snapshot device
pseudo-device md 1 # Ramdisk driver
pseudo-device rnd # /dev/random and in-kernel generator
pseudo-device clockctl # user control of clock subsystem
pseudo-device ksyms # /dev/ksyms
#pseudo-device pf # PF packet filter
#pseudo-device pflog # PF log if
# If the standard modes don't work for your monitor, you can specify
# a RISC-OS-format monitor definition file and a list of modes here.
#makeoptions MONITOR="Taxan875+LR"
#makeoptions MONITOR="AKF60"
#makeoptions MODES="1024,768,60 1024,768,70 800,600,60 640,480,60 1280,1024 1152,900"