NetBSD-5.0.2/sys/arch/amiga/dev/if_qn.c
/* $NetBSD: if_qn.c,v 1.31 2007/10/17 19:53:16 garbled Exp $ */
/*
* Copyright (c) 1995 Mika Kortelainen
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Mika Kortelainen
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Thanks for Aspecs Oy (Finland) for the data book for the NIC used
* in this card and also many thanks for the Resource Management Force
* (QuickNet card manufacturer) and especially Daniel Koch for providing
* me with the necessary 'inside' information to write the driver.
*
* This is partly based on other code:
* - if_ed.c: basic function structure for Ethernet driver and now also
* qn_put() is done similarly, i.e. no extra packet buffers.
*
* Device driver for National Semiconductor DS8390/WD83C690 based ethernet
* adapters.
*
* Copyright (c) 1994, 1995 Charles M. Hannum. All rights reserved.
*
* Copyright (C) 1993, David Greenman. This software may be used,
* modified, copied, distributed, and sold, in both source and binary
* form provided that the above copyright and these terms are retained.
* Under no circumstances is the author responsible for the proper
* functioning of this software, nor does the author assume any
* responsibility for damages incurred with its use.
*
* - if_es.c: used as an example of -current driver
*
* Copyright (c) 1995 Michael L. Hitch
* All rights reserved.
*
* - if_fe.c: some ideas for error handling for qn_rint() which might
* have fixed those random lock ups, too.
*
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
*
*
* TODO:
* - add multicast support
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_qn.c,v 1.31 2007/10/17 19:53:16 garbled Exp $");
#include "qn.h"
#if NQN > 0
#define QN_DEBUG
#define QN_DEBUG1_no /* hides some old tests */
#define QN_CHECKS_no /* adds some checks (not needed in normal situations) */
#include "bpfilter.h"
/*
* Fujitsu MB86950 Ethernet Controller (as used in the QuickNet QN2000
* Ethernet card)
*/
#include "opt_inet.h"
#include "opt_ns.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/buf.h>
#include <sys/device.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/syslog.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_ether.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_inarp.h>
#endif
#ifdef NS
#include <netns/ns.h>
#include <netns/ns_if.h>
#endif
#include <machine/cpu.h>
#include <machine/mtpr.h>
#include <amiga/amiga/device.h>
#include <amiga/amiga/isr.h>
#include <amiga/dev/zbusvar.h>
#include <amiga/dev/if_qnreg.h>
#define NIC_R_MASK (R_INT_PKT_RDY | R_INT_ALG_ERR |\
R_INT_CRC_ERR | R_INT_OVR_FLO)
#define MAX_PACKETS 30 /* max number of packets read per interrupt */
/*
* Ethernet software status per interface
*
* Each interface is referenced by a network interface structure,
* qn_if, which the routing code uses to locate the interface.
* This structure contains the output queue for the interface, its address, ...
*/
struct qn_softc {
struct device sc_dev;
struct isr sc_isr;
struct ethercom sc_ethercom; /* Common ethernet structures */
u_char volatile *sc_base;
u_char volatile *sc_nic_base;
u_short volatile *nic_fifo;
u_short volatile *nic_r_status;
u_short volatile *nic_t_status;
u_short volatile *nic_r_mask;
u_short volatile *nic_t_mask;
u_short volatile *nic_r_mode;
u_short volatile *nic_t_mode;
u_short volatile *nic_reset;
u_short volatile *nic_len;
u_char transmit_pending;
#if NBPFILTER > 0
void * sc_bpf;
#endif
} qn_softc[NQN];
#if NBPFILTER > 0
#include <net/bpf.h>
#include <net/bpfdesc.h>
#endif
int qnmatch(struct device *, struct cfdata *, void *);
void qnattach(struct device *, struct device *, void *);
int qnintr(void *);
int qnioctl(struct ifnet *, u_long, void *);
void qnstart(struct ifnet *);
void qnwatchdog(struct ifnet *);
void qnreset(struct qn_softc *);
void qninit(struct qn_softc *);
void qnstop(struct qn_softc *);
static u_short qn_put(u_short volatile *, struct mbuf *);
static void qn_rint(struct qn_softc *, u_short);
static void qn_flush(struct qn_softc *);
static void inline word_copy_from_card(u_short volatile *, u_short *, u_short);
static void inline word_copy_to_card(u_short *, u_short volatile *,
register u_short);
static void qn_get_packet(struct qn_softc *, u_short);
#ifdef QN_DEBUG1
static void qn_dump(struct qn_softc *);
#endif
CFATTACH_DECL(qn, sizeof(struct qn_softc),
qnmatch, qnattach, NULL, NULL);
int
qnmatch(struct device *parent, struct cfdata *cfp, void *aux)
{
struct zbus_args *zap;
zap = (struct zbus_args *)aux;
/* RMF QuickNet QN2000 EtherNet card */
if (zap->manid == 2011 && zap->prodid == 2)
return (1);
return (0);
}
/*
* Interface exists: make available by filling in network interface
* record. System will initialize the interface when it is ready
* to accept packets.
*/
void
qnattach(struct device *parent, struct device *self, void *aux)
{
struct zbus_args *zap;
struct qn_softc *sc = (struct qn_softc *)self;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
u_int8_t myaddr[ETHER_ADDR_LEN];
zap = (struct zbus_args *)aux;
sc->sc_base = zap->va;
sc->sc_nic_base = sc->sc_base + QUICKNET_NIC_BASE;
sc->nic_fifo = (u_short volatile *)(sc->sc_nic_base + NIC_BMPR0);
sc->nic_len = (u_short volatile *)(sc->sc_nic_base + NIC_BMPR2);
sc->nic_t_status = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR0);
sc->nic_r_status = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR2);
sc->nic_t_mask = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR1);
sc->nic_r_mask = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR3);
sc->nic_t_mode = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR4);
sc->nic_r_mode = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR5);
sc->nic_reset = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR6);
sc->transmit_pending = 0;
/*
* The ethernet address of the board (1st three bytes are the vendor
* address, the rest is the serial number of the board).
*/
myaddr[0] = 0x5c;
myaddr[1] = 0x5c;
myaddr[2] = 0x00;
myaddr[3] = (zap->serno >> 16) & 0xff;
myaddr[4] = (zap->serno >> 8) & 0xff;
myaddr[5] = zap->serno & 0xff;
/* set interface to stopped condition (reset) */
qnstop(sc);
bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ);
ifp->if_softc = sc;
ifp->if_ioctl = qnioctl;
ifp->if_watchdog = qnwatchdog;
ifp->if_start = qnstart;
/* XXX IFF_MULTICAST */
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS;
ifp->if_mtu = ETHERMTU;
/* Attach the interface. */
if_attach(ifp);
ether_ifattach(ifp, myaddr);
#ifdef QN_DEBUG
printf(": hardware address %s\n", ether_sprintf(myaddr));
#endif
sc->sc_isr.isr_intr = qnintr;
sc->sc_isr.isr_arg = sc;
sc->sc_isr.isr_ipl = 2;
add_isr(&sc->sc_isr);
}
/*
* Initialize device
*
*/
void
qninit(struct qn_softc *sc)
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
u_short i;
static int retry = 0;
*sc->nic_r_mask = NIC_R_MASK;
*sc->nic_t_mode = NO_LOOPBACK;
if (sc->sc_ethercom.ec_if.if_flags & IFF_PROMISC) {
*sc->nic_r_mode = PROMISCUOUS_MODE;
log(LOG_INFO, "qn: Promiscuous mode (not tested)\n");
} else
*sc->nic_r_mode = NORMAL_MODE;
/* Set physical ethernet address. */
for (i = 0; i < ETHER_ADDR_LEN; i++)
*((u_short volatile *)(sc->sc_nic_base+
QNET_HARDWARE_ADDRESS+2*i)) =
((((u_short)CLLADDR(ifp->if_sadl)[i]) << 8) |
CLLADDR(ifp->if_sadl)[i]);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
sc->transmit_pending = 0;
qn_flush(sc);
/* QuickNet magic. Done ONLY once, otherwise a lockup occurs. */
if (retry == 0) {
*((u_short volatile *)(sc->sc_nic_base + QNET_MAGIC)) = 0;
retry = 1;
}
/* Enable data link controller. */
*sc->nic_reset = ENABLE_DLC;
/* Attempt to start output, if any. */
qnstart(ifp);
}
/*
* Device timeout/watchdog routine. Entered if the device neglects to
* generate an interrupt after a transmit has been started on it.
*/
void
qnwatchdog(struct ifnet *ifp)
{
struct qn_softc *sc = ifp->if_softc;
log(LOG_INFO, "qn: device timeout (watchdog)\n");
++sc->sc_ethercom.ec_if.if_oerrors;
qnreset(sc);
}
/*
* Flush card's buffer RAM.
*/
static void
qn_flush(struct qn_softc *sc)
{
#if 1
/* Read data until bus read error (i.e. buffer empty). */
while (!(*sc->nic_r_status & R_BUS_RD_ERR))
(void)(*sc->nic_fifo);
#else
/* Read data twice to clear some internal pipelines. */
(void)(*sc->nic_fifo);
(void)(*sc->nic_fifo);
#endif
/* Clear bus read error. */
*sc->nic_r_status = R_BUS_RD_ERR;
}
/*
* Reset the interface.
*
*/
void
qnreset(struct qn_softc *sc)
{
int s;
s = splnet();
qnstop(sc);
qninit(sc);
splx(s);
}
/*
* Take interface offline.
*/
void
qnstop(struct qn_softc *sc)
{
/* Stop the interface. */
*sc->nic_reset = DISABLE_DLC;
delay(200);
*sc->nic_t_status = CLEAR_T_ERR;
*sc->nic_t_mask = CLEAR_T_MASK;
*sc->nic_r_status = CLEAR_R_ERR;
*sc->nic_r_mask = CLEAR_R_MASK;
/* Turn DMA off */
*((u_short volatile *)(sc->sc_nic_base + NIC_BMPR4)) = 0;
/* Accept no packets. */
*sc->nic_r_mode = 0;
*sc->nic_t_mode = 0;
qn_flush(sc);
}
/*
* Start output on interface. Get another datagram to send
* off the interface queue, and copy it to the
* interface before starting the output.
*
* This assumes that it is called inside a critical section...
*
*/
void
qnstart(struct ifnet *ifp)
{
struct qn_softc *sc = ifp->if_softc;
struct mbuf *m;
u_short len;
int timout = 60000;
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
return;
IF_DEQUEUE(&ifp->if_snd, m);
if (m == 0)
return;
#if NBPFILTER > 0
/*
* If bpf is listening on this interface, let it
* see the packet before we commit it to the wire
*
* (can't give the copy in QuickNet card RAM to bpf, because
* that RAM is not visible to the host but is read from FIFO)
*
*/
if (sc->sc_bpf)
bpf_mtap(sc->sc_bpf, m);
#endif
len = qn_put(sc->nic_fifo, m);
m_freem(m);
/*
* Really transmit the packet.
*/
/* Set packet length (byte-swapped). */
len = ((len >> 8) & 0x0007) | TRANSMIT_START | ((len & 0x00ff) << 8);
*sc->nic_len = len;
/* Wait for the packet to really leave. */
while (!(*sc->nic_t_status & T_TMT_OK) && --timout) {
if ((timout % 10000) == 0)
log(LOG_INFO, "qn: timout...\n");
}
if (timout == 0)
/* Maybe we should try to recover from this one? */
/* But now, let's just fall thru and hope the best... */
log(LOG_INFO, "qn: transmit timout (fatal?)\n");
sc->transmit_pending = 1;
*sc->nic_t_mask = INT_TMT_OK | INT_SIXTEEN_COL;
ifp->if_flags |= IFF_OACTIVE;
ifp->if_timer = 2;
}
/*
* Memory copy, copies word at a time
*/
static void inline
word_copy_from_card(u_short volatile *card, u_short *b, u_short len)
{
register u_short l = len/2;
while (l--)
*b++ = *card;
}
static void inline
word_copy_to_card(u_short *a, u_short volatile *card, register u_short len)
{
/*register u_short l = len/2;*/
while (len--)
*card = *a++;
}
/*
* Copy packet from mbuf to the board memory
*
*/
static u_short
qn_put(u_short volatile *addr, struct mbuf *m)
{
u_short *data;
u_char savebyte[2];
int len, len1, wantbyte;
u_short totlen;
totlen = wantbyte = 0;
for (; m != NULL; m = m->m_next) {
data = mtod(m, u_short *);
len = m->m_len;
if (len > 0) {
totlen += len;
/* Finish the last word. */
if (wantbyte) {
savebyte[1] = *((u_char *)data);
*addr = *((u_short *)savebyte);
data = (u_short *)((u_char *)data + 1);
len--;
wantbyte = 0;
}
/* Output contiguous words. */
if (len > 1) {
len1 = len/2;
word_copy_to_card(data, addr, len1);
data += len1;
len &= 1;
}
/* Save last byte, if necessary. */
if (len == 1) {
savebyte[0] = *((u_char *)data);
wantbyte = 1;
}
}
}
if (wantbyte) {
savebyte[1] = 0;
*addr = *((u_short *)savebyte);
}
if(totlen < (ETHER_MIN_LEN - ETHER_CRC_LEN)) {
/*
* Fill the rest of the packet with zeros.
* N.B.: This is required! Otherwise MB86950 fails.
*/
for(len = totlen + 1; len < (ETHER_MIN_LEN - ETHER_CRC_LEN);
len += 2)
*addr = (u_short)0x0000;
totlen = (ETHER_MIN_LEN - ETHER_CRC_LEN);
}
return (totlen);
}
/*
* Copy packet from board RAM.
*
* Trailers not supported.
*
*/
static void
qn_get_packet(struct qn_softc *sc, u_short len)
{
register u_short volatile *nic_fifo_ptr = sc->nic_fifo;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct mbuf *m, *dst, *head = NULL;
register u_short len1;
u_short amount;
/* Allocate header mbuf. */
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL)
goto bad;
/*
* Round len to even value.
*/
if (len & 1)
len++;
m->m_pkthdr.rcvif = &sc->sc_ethercom.ec_if;
m->m_pkthdr.len = len;
m->m_len = 0;
head = m;
word_copy_from_card(nic_fifo_ptr,
mtod(head, u_short *),
sizeof(struct ether_header));
head->m_len += sizeof(struct ether_header);
len -= sizeof(struct ether_header);
while (len > 0) {
len1 = len;
amount = M_TRAILINGSPACE(m);
if (amount == 0) {
/* Allocate another mbuf. */
dst = m;
MGET(m, M_DONTWAIT, MT_DATA);
if (m == NULL)
goto bad;
if (len1 >= MINCLSIZE)
MCLGET(m, M_DONTWAIT);
m->m_len = 0;
dst->m_next = m;
amount = M_TRAILINGSPACE(m);
}
if (amount < len1)
len1 = amount;
word_copy_from_card(nic_fifo_ptr,
(u_short *)(mtod(m, char *) + m->m_len),
len1);
m->m_len += len1;
len -= len1;
}
#if NBPFILTER > 0
if (sc->sc_bpf)
bpf_mtap(sc->sc_bpf, head);
#endif
(*ifp->if_input)(ifp, head);
return;
bad:
if (head) {
m_freem(head);
log(LOG_INFO, "qn_get_packet: mbuf alloc failed\n");
}
}
/*
* Ethernet interface receiver interrupt.
*/
static void
qn_rint(struct qn_softc *sc, u_short rstat)
{
int i;
u_short len, status;
/* Clear the status register. */
*sc->nic_r_status = CLEAR_R_ERR;
/*
* Was there some error?
* Some of them are senseless because they are masked off.
* XXX
*/
if (rstat & R_INT_OVR_FLO) {
#ifdef QN_DEBUG
log(LOG_INFO, "Overflow\n");
#endif
++sc->sc_ethercom.ec_if.if_ierrors;
}
if (rstat & R_INT_CRC_ERR) {
#ifdef QN_DEBUG
log(LOG_INFO, "CRC Error\n");
#endif
++sc->sc_ethercom.ec_if.if_ierrors;
}
if (rstat & R_INT_ALG_ERR) {
#ifdef QN_DEBUG
log(LOG_INFO, "Alignment error\n");
#endif
++sc->sc_ethercom.ec_if.if_ierrors;
}
if (rstat & R_INT_SRT_PKT) {
/* Short packet (these may occur and are
* no reason to worry about - or maybe
* they are?).
*/
#ifdef QN_DEBUG
log(LOG_INFO, "Short packet\n");
#endif
++sc->sc_ethercom.ec_if.if_ierrors;
}
if (rstat & 0x4040) {
#ifdef QN_DEBUG
log(LOG_INFO, "Bus read error\n");
#endif
++sc->sc_ethercom.ec_if.if_ierrors;
qnreset(sc);
}
/*
* Read at most MAX_PACKETS packets per interrupt
*/
for (i = 0; i < MAX_PACKETS; i++) {
if (*sc->nic_r_mode & RM_BUF_EMP)
/* Buffer empty. */
break;
/*
* Read the first word: upper byte contains useful
* information.
*/
status = *sc->nic_fifo;
if ((status & 0x7000) != 0x2000) {
log(LOG_INFO, "qn: ERROR: status=%04x\n", status);
continue;
}
/*
* Read packet length (byte-swapped).
* CRC is stripped off by the NIC.
*/
len = *sc->nic_fifo;
len = ((len << 8) & 0xff00) | ((len >> 8) & 0x00ff);
#ifdef QN_CHECKS
if (len > (ETHER_MAX_LEN - ETHER_CRC_LEN) ||
len < ETHER_HDR_LEN) {
log(LOG_WARNING,
"%s: received a %s packet? (%u bytes)\n",
sc->sc_dev.dv_xname,
len < ETHER_HDR_LEN ? "partial" : "big", len);
++sc->sc_ethercom.ec_if.if_ierrors;
continue;
}
#endif
#ifdef QN_CHECKS
if (len < (ETHER_MIN_LEN - ETHER_CRC_LEN))
log(LOG_WARNING,
"%s: received a short packet? (%u bytes)\n",
sc->sc_dev.dv_xname, len);
#endif
/* Read the packet. */
qn_get_packet(sc, len);
++sc->sc_ethercom.ec_if.if_ipackets;
}
#ifdef QN_DEBUG
/* This print just to see whether MAX_PACKETS is large enough. */
if (i == MAX_PACKETS)
log(LOG_INFO, "used all the %d loops\n", MAX_PACKETS);
#endif
}
/*
* Our interrupt routine
*/
int
qnintr(void *arg)
{
struct qn_softc *sc = arg;
u_short tint, rint, tintmask;
char return_tintmask = 0;
/*
* If the driver has not been initialized, just return immediately.
* This also happens if there is no QuickNet board present.
*/
if (sc->sc_base == NULL)
return (0);
/* Get interrupt statuses and masks. */
rint = (*sc->nic_r_status) & NIC_R_MASK;
tintmask = *sc->nic_t_mask;
tint = (*sc->nic_t_status) & tintmask;
if (tint == 0 && rint == 0)
return (0);
/* Disable interrupts so that we won't miss anything. */
*sc->nic_r_mask = CLEAR_R_MASK;
*sc->nic_t_mask = CLEAR_T_MASK;
/*
* Handle transmitter interrupts. Some of them are not asked for
* but do happen, anyway.
*/
if (tint != 0) {
/* Clear transmit interrupt status. */
*sc->nic_t_status = CLEAR_T_ERR;
if (sc->transmit_pending && (tint & T_TMT_OK)) {
sc->transmit_pending = 0;
/*
* Update total number of successfully
* transmitted packets.
*/
sc->sc_ethercom.ec_if.if_opackets++;
}
if (tint & T_SIXTEEN_COL) {
/*
* 16 collision (i.e., packet lost).
*/
log(LOG_INFO, "qn: 16 collision - packet lost\n");
#ifdef QN_DEBUG1
qn_dump(sc);
#endif
sc->sc_ethercom.ec_if.if_oerrors++;
sc->sc_ethercom.ec_if.if_collisions += 16;
sc->transmit_pending = 0;
}
if (sc->transmit_pending) {
log(LOG_INFO, "qn:still pending...\n");
/* Must return transmission interrupt mask. */
return_tintmask = 1;
} else {
sc->sc_ethercom.ec_if.if_flags &= ~IFF_OACTIVE;
/* Clear watchdog timer. */
sc->sc_ethercom.ec_if.if_timer = 0;
}
} else
return_tintmask = 1;
/*
* Handle receiver interrupts.
*/
if (rint != 0)
qn_rint(sc, rint);
if ((sc->sc_ethercom.ec_if.if_flags & IFF_OACTIVE) == 0)
qnstart(&sc->sc_ethercom.ec_if);
else if (return_tintmask == 1)
*sc->nic_t_mask = tintmask;
/* Set receive interrupt mask back. */
*sc->nic_r_mask = NIC_R_MASK;
return (1);
}
/*
* Process an ioctl request. This code needs some work - it looks pretty ugly.
* I somehow think that this is quite a common excuse... ;-)
*/
int
qnioctl(register struct ifnet *ifp, u_long cmd, void *data)
{
struct qn_softc *sc = ifp->if_softc;
register struct ifaddr *ifa = (struct ifaddr *)data;
#if 0
struct ifreg *ifr = (struct ifreg *)data;
#endif
int s, error = 0;
s = splnet();
switch (cmd) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
qnstop(sc);
qninit(sc);
arp_ifinit(ifp, ifa);
break;
#endif
#ifdef NS
case AF_NS:
{
register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr);
if (ns_nullhost(*ina))
ina->x_host =
*(union ns_host *)LLADDR(ifp->if_sadl);
else
bcopy(ina->x_host.c_host,
LLADDR(ifp->if_sadl), ETHER_ADDR_LEN);
qnstop(sc);
qninit(sc);
break;
}
#endif
default:
log(LOG_INFO, "qn:sa_family:default (not tested)\n");
qnstop(sc);
qninit(sc);
break;
}
break;
case SIOCSIFFLAGS:
if ((ifp->if_flags & IFF_UP) == 0 &&
(ifp->if_flags & IFF_RUNNING) != 0) {
/*
* If interface is marked down and it is running, then
* stop it.
*/
#ifdef QN_DEBUG1
qn_dump(sc);
#endif
qnstop(sc);
ifp->if_flags &= ~IFF_RUNNING;
} else if ((ifp->if_flags & IFF_UP) != 0 &&
(ifp->if_flags & IFF_RUNNING) == 0) {
/*
* If interface is marked up and it is stopped, then
* start it.
*/
qninit(sc);
} else {
/*
* Something else... we won't do anything so we won't
* break anything (hope so).
*/
#ifdef QN_DEBUG1
log(LOG_INFO, "Else branch...\n");
#endif
}
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
log(LOG_INFO, "qnioctl: multicast not done yet\n");
#if 0
if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) {
/*
* Multicast list has changed; set the hardware filter
* accordingly.
*/
log(LOG_INFO, "qnioctl: multicast not done yet\n");
error = 0;
}
#else
error = EINVAL;
#endif
break;
default:
log(LOG_INFO, "qnioctl: default\n");
error = EINVAL;
}
splx(s);
return (error);
}
/*
* Dump some register information.
*/
#ifdef QN_DEBUG1
static void
qn_dump(struct qn_softc *sc)
{
log(LOG_INFO, "t_status : %04x\n", *sc->nic_t_status);
log(LOG_INFO, "t_mask : %04x\n", *sc->nic_t_mask);
log(LOG_INFO, "t_mode : %04x\n", *sc->nic_t_mode);
log(LOG_INFO, "r_status : %04x\n", *sc->nic_r_status);
log(LOG_INFO, "r_mask : %04x\n", *sc->nic_r_mask);
log(LOG_INFO, "r_mode : %04x\n", *sc->nic_r_mode);
log(LOG_INFO, "pending : %02x\n", sc->transmit_pending);
log(LOG_INFO, "if_flags : %04x\n", sc->sc_ethercom.ec_if.if_flags);
}
#endif
#endif /* NQN > 0 */