NetBSD-5.0.2/sys/arch/amiga/dev/ser.c
/* $NetBSD: ser.c,v 1.78 2008/06/11 12:59:10 tsutsui Exp $ */
/*
* Copyright (c) 1982, 1986, 1990 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ser.c 7.12 (Berkeley) 6/27/91
*/
/*
* XXX This file needs major cleanup it will never service more than one
* XXX unit.
*/
#include "opt_amigacons.h"
#include "opt_ddb.h"
#include "opt_kgdb.h"
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: ser.c,v 1.78 2008/06/11 12:59:10 tsutsui Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/file.h>
#include <sys/malloc.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/queue.h>
#include <sys/conf.h>
#include <sys/kauth.h>
#include <machine/cpu.h>
#include <amiga/amiga/device.h>
#include <amiga/dev/serreg.h>
#include <amiga/amiga/custom.h>
#include <amiga/amiga/cia.h>
#include <amiga/amiga/cc.h>
#include <dev/cons.h>
#include "ser.h"
#if NSER > 0
void serattach(struct device *, struct device *, void *);
int sermatch(struct device *, struct cfdata *, void *);
struct ser_softc {
struct device dev;
struct tty *ser_tty;
};
CFATTACH_DECL(ser, sizeof(struct ser_softc),
sermatch, serattach, NULL, NULL);
extern struct cfdriver ser_cd;
dev_type_open(seropen);
dev_type_close(serclose);
dev_type_read(serread);
dev_type_write(serwrite);
dev_type_ioctl(serioctl);
dev_type_stop(serstop);
dev_type_tty(sertty);
dev_type_poll(serpoll);
const struct cdevsw ser_cdevsw = {
seropen, serclose, serread, serwrite, serioctl,
serstop, sertty, serpoll, nommap, ttykqfilter, D_TTY
};
#ifndef SEROBUF_SIZE
#define SEROBUF_SIZE 32
#endif
#ifndef SERIBUF_SIZE
#define SERIBUF_SIZE 512
#endif
#define splser() spl5()
void serstart(struct tty *);
void ser_shutdown(struct ser_softc *);
int serparam(struct tty *, struct termios *);
void serintr(void);
int serhwiflow(struct tty *, int);
int sermctl(dev_t dev, int, int);
void ser_fastint(void);
void sereint(int);
static void ser_putchar(struct tty *, u_short);
void ser_outintr(void);
void sercnprobe(struct consdev *);
void sercninit(struct consdev *);
void serinit(int);
int sercngetc(dev_t dev);
void sercnputc(dev_t, int);
void sercnpollc(dev_t, int);
int nser = NSER;
#ifdef SERCONSOLE
int serconsole = 0;
#else
int serconsole = -1;
#endif
int serconsinit;
int serdefaultrate = TTYDEF_SPEED;
int serswflags;
struct vbl_node ser_vbl_node;
struct tty ser_cons;
struct tty *ser_tty;
static u_short serbuf[SERIBUF_SIZE];
static u_short *sbrpt = serbuf;
static u_short *sbwpt = serbuf;
static u_short sbcnt;
static u_short sbovfl;
static u_char serdcd;
/*
* Since this UART is not particularly bright (to put it nicely), we'll
* have to do parity stuff on our own. This table contains the 8th bit
* in 7bit character mode, for even parity. If you want odd parity,
* flip the bit. (for generation of the table, see genpar.c)
*/
u_char even_parity[] = {
0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
};
/*
* Since we don't get interrupts for changes on the modem control line,
* we'll have to fake them by comparing current settings to the settings
* we remembered on last invocation.
*/
u_char last_ciab_pra;
extern struct tty *constty;
extern int ser_open_speed; /* current speed of open serial device */
#ifdef KGDB
#include <machine/remote-sl.h>
extern dev_t kgdb_dev;
extern int kgdb_rate;
extern int kgdb_debug_init;
#endif
#ifdef DEBUG
long fifoin[17];
long fifoout[17];
long serintrcount[16];
long sermintcount[16];
#endif
void sermint(register int unit);
int
sermatch(struct device *pdp, struct cfdata *cfp, void *auxp)
{
static int ser_matched = 0;
static int ser_matched_real = 0;
/* Allow only once instance. */
if (matchname("ser", (char *)auxp) == 0)
return(0);
if (amiga_realconfig) {
if (ser_matched_real)
return(0);
ser_matched_real = 1;
} else {
if (serconsole != 0)
return(0);
if (ser_matched != 0)
return(0);
ser_matched = 1;
}
return(1);
}
void
serattach(struct device *pdp, struct device *dp, void *auxp)
{
struct ser_softc *sc;
struct tty *tp;
u_short ir;
sc = device_private(dp);
ir = custom.intenar;
if (serconsole == 0)
DELAY(100000);
ser_vbl_node.function = (void (*) (void *)) sermint;
add_vbl_function(&ser_vbl_node, SER_VBL_PRIORITY, (void *) 0);
#ifdef KGDB
if (kgdb_dev == makedev(cdevsw_lookup_major(&ser_cdevsw), 0)) {
if (serconsole == 0)
kgdb_dev = NODEV; /* can't debug over console port */
else {
(void) serinit(kgdb_rate);
serconsinit = 1; /* don't re-init in serputc */
if (kgdb_debug_init == 0)
printf(" kgdb enabled\n");
else {
/*
* Print prefix of device name,
* let kgdb_connect print the rest.
*/
printf("ser0: ");
kgdb_connect(1);
}
}
}
#endif
/*
* Need to reset baud rate, etc. of next print so reset serconsinit.
*/
if (0 == serconsole)
serconsinit = 0;
tp = ttymalloc();
tp->t_oproc = (void (*) (struct tty *)) serstart;
tp->t_param = serparam;
tp->t_hwiflow = serhwiflow;
tty_attach(tp);
sc->ser_tty = ser_tty = tp;
if (dp)
printf(": input fifo %d output fifo %d\n", SERIBUF_SIZE,
SEROBUF_SIZE);
}
/* ARGSUSED */
int
seropen(dev_t dev, int flag, int mode, struct lwp *l)
{
struct ser_softc *sc;
struct tty *tp;
int unit, error, s, s2;
error = 0;
unit = SERUNIT(dev);
sc = device_lookup_private(&ser_cd, unit);
if (sc == NULL)
return (ENXIO);
/* XXX com.c: insert KGDB check here */
/* XXX ser.c had: s = spltty(); */
tp = sc->ser_tty;
if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
return (EBUSY);
s = spltty();
/*
* If this is a first open...
*/
if ((tp->t_state & TS_ISOPEN) == 0 && tp->t_wopen == 0) {
struct termios t;
tp->t_dev = dev;
s2 = splser();
/*
* XXX here: hw enable,
*/
last_ciab_pra = ciab.pra;
splx(s2);
t.c_ispeed = 0;
/* XXX serconsolerate? */
t.c_ospeed = TTYDEF_SPEED;
t.c_cflag = TTYDEF_CFLAG;
if (serswflags & TIOCFLAG_CLOCAL)
t.c_cflag |= CLOCAL;
if (serswflags & TIOCFLAG_CRTSCTS)
t.c_cflag |= CRTSCTS;
if (serswflags & TIOCFLAG_MDMBUF)
t.c_cflag |= MDMBUF;
/* Make sure serparam() will do something. */
tp->t_ospeed = 0;
serparam(tp, &t);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_lflag = TTYDEF_LFLAG;
ttychars(tp);
ttsetwater(tp);
s2 = splser();
(void)sermctl(dev, TIOCM_DTR, DMSET);
/* clear input ring */
sbrpt = sbwpt = serbuf;
sbcnt = 0;
splx(s2);
}
splx(s);
error = ttyopen(tp, DIALOUT(dev), flag & O_NONBLOCK);
if (error)
goto bad;
error = tp->t_linesw->l_open(dev, tp);
if (error)
goto bad;
return (0);
bad:
if (!(tp->t_state & TS_ISOPEN) && tp->t_wopen == 0) {
ser_shutdown(sc);
}
return (error);
}
/*ARGSUSED*/
int
serclose(dev_t dev, int flag, int mode, struct lwp *l)
{
struct ser_softc *sc;
struct tty *tp;
sc = device_lookup_private(&ser_cd, SERUNIT(dev));
tp = ser_tty;
/* XXX This is for cons.c, according to com.c */
if (!(tp->t_state & TS_ISOPEN))
return (0);
tp->t_linesw->l_close(tp, flag);
ttyclose(tp);
if (!(tp->t_state & TS_ISOPEN) && tp->t_wopen == 0) {
ser_shutdown(sc);
}
return (0);
}
void
ser_shutdown(struct ser_softc *sc)
{
struct tty *tp = sc->ser_tty;
int s;
s = splser();
custom.adkcon = ADKCONF_UARTBRK; /* clear break */
#if 0 /* XXX fix: #ifdef KGDB */
/*
* do not disable interrupts if debugging
*/
if (dev != kgdb_dev)
#endif
custom.intena = INTF_RBF | INTF_TBE; /* disable interrupts */
custom.intreq = INTF_RBF | INTF_TBE; /* clear intr request */
/*
* If HUPCL is not set, leave DTR unchanged.
*/
if (tp->t_cflag & HUPCL) {
(void)sermctl(tp->t_dev, TIOCM_DTR, DMBIC);
/*
* Idea from dev/ic/com.c:
* sleep a bit so that other side will notice, even if we
* reopen immediately.
*/
(void) tsleep(tp, TTIPRI, ttclos, hz);
}
#if not_yet
if (tp != &ser_cons) {
remove_vbl_function(&ser_vbl_node);
ttyfree(tp);
ser_tty = (struct tty *) NULL;
}
#endif
ser_open_speed = tp->t_ispeed;
return;
}
int
serread(dev_t dev, struct uio *uio, int flag)
{
/* ARGSUSED */
return ser_tty->t_linesw->l_read(ser_tty, uio, flag);
}
int
serwrite(dev_t dev, struct uio *uio, int flag)
{
/* ARGSUSED */
return ser_tty->t_linesw->l_write(ser_tty, uio, flag);
}
int
serpoll(dev_t dev, int events, struct lwp *l)
{
/* ARGSUSED */
return ser_tty->t_linesw->l_poll(ser_tty, events, l);
}
struct tty *
sertty(dev_t dev)
{
/* ARGSUSED */
return (ser_tty);
}
/*
* We don't do any processing of data here, so we store the raw code
* obtained from the uart register. In theory, 110kBaud gives you
* 11kcps, so 16k buffer should be more than enough, interrupt
* latency of 1s should never happen, or something is seriously
* wrong..
* buffers moved to above seropen() -is
*/
/*
* This is a replacement for the lack of a hardware fifo. 32k should be
* enough (there's only one unit anyway, so this is not going to
* accumulate).
*/
void
ser_fastint(void)
{
/*
* We're at RBE-level, which is higher than VBL-level which is used
* to periodically transmit contents of this buffer up one layer,
* so no spl-raising is necessary.
*/
u_short code;
/*
* This register contains both data and status bits!
*/
code = custom.serdatr;
/*
* Use SERDATF_RBF instead of INTF_RBF; they're equivalent, but
* we save one (slow) custom chip access.
*/
if ((code & SERDATRF_RBF) == 0)
return;
/*
* clear interrupt
*/
custom.intreq = INTF_RBF;
/*
* check for buffer overflow.
*/
if (sbcnt == SERIBUF_SIZE) {
++sbovfl;
return;
}
/*
* store in buffer
*/
*sbwpt++ = code;
if (sbwpt == serbuf + SERIBUF_SIZE)
sbwpt = serbuf;
++sbcnt;
if (sbcnt > SERIBUF_SIZE - 20)
CLRRTS(ciab.pra); /* drop RTS if buffer almost full */
}
void
serintr(void)
{
int s1, s2, ovfl;
struct tty *tp = ser_tty;
/*
* Make sure we're not interrupted by another
* vbl, but allow level5 ints
*/
s1 = spltty();
/*
* pass along any acumulated information
*/
while (sbcnt > 0 && (tp->t_state & TS_TBLOCK) == 0) {
/*
* no collision with ser_fastint()
*/
sereint(*sbrpt++);
ovfl = 0;
/* lock against ser_fastint() */
s2 = splser();
sbcnt--;
if (sbrpt == serbuf + SERIBUF_SIZE)
sbrpt = serbuf;
if (sbovfl != 0) {
ovfl = sbovfl;
sbovfl = 0;
}
splx(s2);
if (ovfl != 0)
log(LOG_WARNING, "ser0: %d ring buffer overflows.\n",
ovfl);
}
s2 = splser();
if (sbcnt == 0 && (tp->t_state & TS_TBLOCK) == 0)
SETRTS(ciab.pra); /* start accepting data again */
splx(s2);
splx(s1);
}
void
sereint(int stat)
{
static int break_in_progress = 0;
struct tty *tp;
u_char ch;
int c;
tp = ser_tty;
ch = stat & 0xff;
c = ch;
if ((tp->t_state & TS_ISOPEN) == 0) {
#ifdef KGDB
int maj;
/* we don't care about parity errors */
maj = cdevsw_lookup_major(&ser_cdevsw);
if (kgdb_dev == makedev(maj, 0) && c == FRAME_END)
kgdb_connect(0); /* trap into kgdb */
#endif
return;
}
/*
* Check for break and (if enabled) parity error.
*/
if ((stat & 0x1ff) == 0) {
if (break_in_progress)
return;
c = TTY_FE;
break_in_progress = 1;
#ifdef DDB
if (serconsole == 0) {
extern int db_active;
if (!db_active) {
console_debugger();
return;
}
}
#endif
} else {
break_in_progress = 0;
if ((tp->t_cflag & PARENB) &&
(((ch >> 7) + even_parity[ch & 0x7f]
+ !!(tp->t_cflag & PARODD)) & 1))
c |= TTY_PE;
}
if (stat & SERDATRF_OVRUN)
log(LOG_WARNING, "ser0: silo overflow\n");
tp->t_linesw->l_rint(c, tp);
}
/*
* This interrupt is periodically invoked in the vertical blank
* interrupt. It's used to keep track of the modem control lines
* and (new with the fast_int code) to move accumulated data
* up into the tty layer.
*/
void
sermint(int unit)
{
struct tty *tp;
u_char stat, last, istat;
tp = ser_tty;
if (!tp)
return;
/*
if ((tp->t_state & TS_ISOPEN) == 0 || tp->t_wopen == 0) {
sbrpt = sbwpt = serbuf;
return;
}
*/
/*
* empty buffer
*/
serintr();
stat = ciab.pra;
last = last_ciab_pra;
last_ciab_pra = stat;
/*
* check whether any interesting signal changed state
*/
istat = stat ^ last;
if (istat & serdcd) {
tp->t_linesw->l_modem(tp, ISDCD(stat));
}
if ((istat & CIAB_PRA_CTS) && (tp->t_state & TS_ISOPEN) &&
(tp->t_cflag & CRTSCTS)) {
#if 0
/* the line is up and we want to do rts/cts flow control */
if (ISCTS(stat)) {
tp->t_state &= ~TS_TTSTOP;
ttstart(tp);
/* cause tbe-int if we were stuck there */
custom.intreq = INTF_SETCLR | INTF_TBE;
} else
tp->t_state |= TS_TTSTOP;
#else
/* do this on hardware level, not with tty driver */
if (ISCTS(stat)) {
tp->t_state &= ~TS_TTSTOP;
/* cause TBE interrupt */
custom.intreq = INTF_SETCLR | INTF_TBE;
}
#endif
}
}
int
serioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l)
{
register struct tty *tp;
register int error;
tp = ser_tty;
if (!tp)
return ENXIO;
error = tp->t_linesw->l_ioctl(tp, cmd, data, flag, l);
if (error != EPASSTHROUGH)
return(error);
error = ttioctl(tp, cmd, data, flag, l);
if (error != EPASSTHROUGH)
return(error);
switch (cmd) {
case TIOCSBRK:
custom.adkcon = ADKCONF_SETCLR | ADKCONF_UARTBRK;
break;
case TIOCCBRK:
custom.adkcon = ADKCONF_UARTBRK;
break;
case TIOCSDTR:
(void) sermctl(dev, TIOCM_DTR, DMBIS);
break;
case TIOCCDTR:
(void) sermctl(dev, TIOCM_DTR, DMBIC);
break;
case TIOCMSET:
(void) sermctl(dev, *(int *) data, DMSET);
break;
case TIOCMBIS:
(void) sermctl(dev, *(int *) data, DMBIS);
break;
case TIOCMBIC:
(void) sermctl(dev, *(int *) data, DMBIC);
break;
case TIOCMGET:
*(int *)data = sermctl(dev, 0, DMGET);
break;
case TIOCGFLAGS:
*(int *)data = serswflags;
break;
case TIOCSFLAGS:
error = kauth_authorize_device_tty(l->l_cred,
KAUTH_DEVICE_TTY_PRIVSET, tp);
if (error != 0)
return(EPERM);
serswflags = *(int *)data;
serswflags &= /* only allow valid flags */
(TIOCFLAG_SOFTCAR | TIOCFLAG_CLOCAL | TIOCFLAG_CRTSCTS);
break;
default:
return(EPASSTHROUGH);
}
return(0);
}
int
serparam(struct tty *tp, struct termios *t)
{
int cflag, ospeed = 0;
if (t->c_ospeed > 0) {
if (t->c_ospeed < 110)
return(EINVAL);
ospeed = SERBRD(t->c_ospeed);
}
if (t->c_ispeed && t->c_ispeed != t->c_ospeed)
return(EINVAL);
if (serswflags & TIOCFLAG_SOFTCAR || serconsole == 0) {
t->c_cflag = (t->c_cflag & ~HUPCL) | CLOCAL;
}
/* if no changes, dont do anything. com.c explains why. */
if (tp->t_ospeed == t->c_ospeed &&
tp->t_cflag == t->c_cflag)
return (0);
cflag = t->c_cflag;
if (cflag & (CLOCAL | MDMBUF))
serdcd = 0;
else
serdcd = CIAB_PRA_CD;
/* TODO: support multiple flow control protocols like com.c */
/*
* copy to tty
*/
tp->t_ispeed = t->c_ispeed;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = cflag;
ser_open_speed = tp->t_ispeed;
/*
* enable interrupts
*/
custom.intena = INTF_SETCLR | INTF_RBF | INTF_TBE;
last_ciab_pra = ciab.pra;
if (t->c_ospeed == 0)
(void)sermctl(tp->t_dev, 0, DMSET); /* hang up line */
else {
/*
* (re)enable DTR
* and set baud rate. (8 bit mode)
*/
(void)sermctl(tp->t_dev, TIOCM_DTR, DMSET);
custom.serper = (0 << 15) | ospeed;
}
(void)tp->t_linesw->l_modem(tp, ISDCD(last_ciab_pra));
return(0);
}
int serhwiflow(struct tty *tp, int flag)
{
#if 0
printf ("serhwiflow %d\n", flag);
#endif
if (flag)
CLRRTS(ciab.pra);
else
SETRTS(ciab.pra);
return 1;
}
static void
ser_putchar(struct tty *tp, u_short c)
{
if ((tp->t_cflag & CSIZE) == CS7 || (tp->t_cflag & PARENB))
c &= 0x7f;
/*
* handle parity if necessary
*/
if (tp->t_cflag & PARENB) {
if (even_parity[c])
c |= 0x80;
if (tp->t_cflag & PARODD)
c ^= 0x80;
}
/*
* add stop bit(s)
*/
if (tp->t_cflag & CSTOPB)
c |= 0x300;
else
c |= 0x100;
custom.serdat = c;
}
static u_char ser_outbuf[SEROBUF_SIZE];
static u_char *sob_ptr = ser_outbuf, *sob_end = ser_outbuf;
void
ser_outintr(void)
{
struct tty *tp;
int s;
tp = ser_tty;
s = spltty();
if (tp == 0)
goto out;
if ((custom.intreqr & INTF_TBE) == 0)
goto out;
/*
* clear interrupt
*/
custom.intreq = INTF_TBE;
if (sob_ptr == sob_end) {
tp->t_state &= ~(TS_BUSY | TS_FLUSH);
if (tp->t_linesw)
tp->t_linesw->l_start(tp);
else
serstart(tp);
goto out;
}
/*
* Do hardware flow control here. if the CTS line goes down, don't
* transmit anything. That way, we'll be restarted by the periodic
* interrupt when CTS comes back up.
*/
if (ISCTS(ciab.pra))
ser_putchar(tp, *sob_ptr++);
else
CLRCTS(last_ciab_pra); /* Remember that CTS is off */
out:
splx(s);
}
void
serstart(struct tty *tp)
{
int cc, s, hiwat;
#ifdef DIAGNOSTIC
int unit;
#endif
hiwat = 0;
if ((tp->t_state & TS_ISOPEN) == 0)
return;
#ifdef DIAGNOSTIC
unit = SERUNIT(tp->t_dev);
if (unit)
panic("serstart: unit is %d", unit);
#endif
s = spltty();
if (tp->t_state & (TS_TIMEOUT | TS_TTSTOP))
goto out;
cc = tp->t_outq.c_cc;
if (!ttypull(tp) || (tp->t_state & TS_BUSY))
goto out;
/*
* We only do bulk transfers if using CTSRTS flow control, not for
* (probably sloooow) ixon/ixoff devices.
*/
if ((tp->t_cflag & CRTSCTS) == 0)
cc = 1;
/*
* Limit the amount of output we do in one burst
* to prevent hogging the CPU.
*/
if (cc > SEROBUF_SIZE) {
hiwat++;
cc = SEROBUF_SIZE;
}
cc = q_to_b(&tp->t_outq, ser_outbuf, cc);
if (cc > 0) {
tp->t_state |= TS_BUSY;
sob_ptr = ser_outbuf;
sob_end = ser_outbuf + cc;
/*
* Get first character out, then have TBE-interrupts blow out
* further characters, until buffer is empty, and TS_BUSY gets
* cleared.
*/
ser_putchar(tp, *sob_ptr++);
}
out:
splx(s);
}
/*
* Stop output on a line.
*/
/*ARGSUSED*/
void
serstop(struct tty *tp, int flag)
{
int s;
s = spltty();
if (tp->t_state & TS_BUSY) {
if ((tp->t_state & TS_TTSTOP) == 0)
tp->t_state |= TS_FLUSH;
}
splx(s);
}
int
sermctl(dev_t dev, int bits, int how)
{
int s;
u_char ub = 0;
/*
* convert TIOCM* mask into CIA mask
* which is active low
*/
if (how != DMGET) {
ub = 0;
if (bits & TIOCM_DTR)
ub |= CIAB_PRA_DTR;
if (bits & TIOCM_RTS)
ub |= CIAB_PRA_RTS;
if (bits & TIOCM_CTS)
ub |= CIAB_PRA_CTS;
if (bits & TIOCM_CD)
ub |= CIAB_PRA_CD;
if (bits & TIOCM_RI)
ub |= CIAB_PRA_SEL; /* collision with /dev/par ! */
if (bits & TIOCM_DSR)
ub |= CIAB_PRA_DSR;
}
s = spltty();
switch (how) {
case DMSET:
/* invert and set */
ciab.pra = ~ub;
break;
case DMBIC:
ciab.pra |= ub;
ub = ~ciab.pra;
break;
case DMBIS:
ciab.pra &= ~ub;
ub = ~ciab.pra;
break;
case DMGET:
ub = ~ciab.pra;
break;
}
(void)splx(s);
bits = 0;
if (ub & CIAB_PRA_DTR)
bits |= TIOCM_DTR;
if (ub & CIAB_PRA_RTS)
bits |= TIOCM_RTS;
if (ub & CIAB_PRA_CTS)
bits |= TIOCM_CTS;
if (ub & CIAB_PRA_CD)
bits |= TIOCM_CD;
if (ub & CIAB_PRA_SEL)
bits |= TIOCM_RI;
if (ub & CIAB_PRA_DSR)
bits |= TIOCM_DSR;
return(bits);
}
/*
* Following are all routines needed for SER to act as console
*/
void
sercnprobe(struct consdev *cp)
{
int maj, unit;
#ifdef KGDB
extern const struct cdevsw ctty_cdevsw;
#endif
/* locate the major number */
maj = cdevsw_lookup_major(&ser_cdevsw);
unit = CONUNIT; /* XXX: ick */
/*
* initialize required fields
*/
cp->cn_dev = makedev(maj, unit);
if (serconsole == unit)
cp->cn_pri = CN_REMOTE;
else
cp->cn_pri = CN_NORMAL;
#ifdef KGDB
/* XXX */
if (cdevsw_lookup(kgdb_dev) == &ctty_cdevsw)
kgdb_dev = makedev(maj, minor(kgdb_dev));
#endif
}
void
sercninit(struct consdev *cp)
{
int unit;
unit = SERUNIT(cp->cn_dev);
serinit(serdefaultrate);
serconsole = unit;
serconsinit = 1;
}
void
serinit(int rate)
{
int s;
s = splser();
/*
* might want to fiddle with the CIA later ???
*/
custom.serper = (rate>=110 ? SERBRD(rate) : 0);
splx(s);
}
int
sercngetc(dev_t dev)
{
u_short stat;
int c, s;
s = splser();
/*
* poll
*/
while (((stat = custom.serdatr & 0xffff) & SERDATRF_RBF) == 0)
;
c = stat & 0xff;
/*
* clear interrupt
*/
custom.intreq = INTF_RBF;
splx(s);
return(c);
}
/*
* Console kernel output character routine.
*/
void
sercnputc(dev_t dev, int c)
{
register int timo;
int s;
s = splhigh();
if (serconsinit == 0) {
(void)serinit(serdefaultrate);
serconsinit = 1;
}
/*
* wait for any pending transmission to finish
*/
timo = 50000;
while (!(custom.serdatr & SERDATRF_TBE) && --timo);
/*
* transmit char.
*/
custom.serdat = (c & 0xff) | 0x100;
/*
* wait for this transmission to complete
*/
timo = 1500000;
while (!(custom.serdatr & SERDATRF_TBE) && --timo)
;
/*
* Wait for the device (my vt100..) to process the data, since we
* don't do flow-control with cnputc
*/
for (timo = 0; timo < 30000; timo++)
;
/*
* We set TBE so that ser_outintr() is called right after to check
* whether there still are chars to process.
* We used to clear this, but it hung the tty output if the kernel
* output a char while userland did on the same serial port.
*/
custom.intreq = INTF_SETCLR | INTF_TBE;
splx(s);
}
void
sercnpollc(dev_t dev, int on)
{
}
#endif