NetBSD-5.0.2/sys/arch/arm/iomd/vidc20config.c
/* $NetBSD: vidc20config.c,v 1.30 2006/10/28 17:39:59 bjh21 Exp $ */
/*
* Copyright (c) 2001 Reinoud Zandijk
* Copyright (c) 1996 Mark Brinicombe
* Copyright (c) 1996 Robert Black
* Copyright (c) 1994-1995 Melvyn Tang-Richardson
* Copyright (c) 1994-1995 RiscBSD kernel team
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the RiscBSD kernel team
* 4. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE RISCBSD TEAM ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* NetBSD kernel project
*
* vidcvideo.c
*
* This file is the lower basis of the wscons driver for VIDC based ARM machines.
* It features the initialisation and all VIDC writing and keeps in internal state
* copy.
* Its currenly set up as a library file and not as a device; it could be named
* vidcvideo0 eventually.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: vidc20config.c,v 1.30 2006/10/28 17:39:59 bjh21 Exp $");
#include <sys/types.h>
#include <sys/param.h>
#include <arm/iomd/vidc.h>
#include <arm/arm32/katelib.h>
#include <machine/bootconfig.h>
#include <machine/intr.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <uvm/uvm_extern.h>
#include <arm/iomd/iomdreg.h>
#include <arm/iomd/iomdvar.h>
#include <arm/iomd/vidc20config.h>
/*
* A structure containing ALL the information required to restore
* the VIDC20 to any given state. ALL vidc transactions should
* go through these procedures, which record the vidc's state.
* it may be an idea to set the permissions of the vidc base address
* so we get a fault, so the fault routine can record the state but
* I guess that's not really necessary for the time being, since we
* can make the kernel more secure later on. Also, it is possible
* to write a routine to allow 'reading' of the vidc registers.
*/
static struct vidc_state vidc_lookup = {
{ 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0
},
VIDC_PALREG,
VIDC_BCOL,
VIDC_CP1 ,
VIDC_CP2,
VIDC_CP3,
VIDC_HCR,
VIDC_HSWR,
VIDC_HBSR,
VIDC_HDSR,
VIDC_HDER,
VIDC_HBER,
VIDC_HCSR,
VIDC_HIR,
VIDC_VCR,
VIDC_VSWR,
VIDC_VBSR,
VIDC_VDSR,
VIDC_VDER,
VIDC_VBER,
VIDC_VCSR,
VIDC_VCER,
VIDC_EREG,
VIDC_FSYNREG,
VIDC_CONREG,
VIDC_DCTL
};
struct vidc_state vidc_current[1];
/*
* XXX global display variables XXX ... should be a structure
*/
static int cold_init = 0; /* flags initialisation */
extern videomemory_t videomemory;
static struct vidc_mode vidc_currentmode;
unsigned int dispstart;
unsigned int dispsize;
unsigned int dispbase;
unsigned int dispend;
unsigned int ptov;
unsigned int vmem_base;
unsigned int phys_base;
unsigned int transfersize;
/* cursor stuff */
char *cursor_normal;
char *cursor_transparent;
int p_cursor_normal;
int p_cursor_transparent;
int cursor_width;
int cursor_height;
/*
* VIDC mode definitions
* generated from RISC OS mode definition file by an `awk' script
*/
extern const struct videomode vidc_videomode_list[];
extern const int vidc_videomode_count;
/*
* configuration printing
*
*/
void
vidcvideo_printdetails(void)
{
printf(": refclk=%dMHz %dKB %s ", (vidc_fref / 1000000),
videomemory.vidm_size / 1024,
(videomemory.vidm_type == VIDEOMEM_TYPE_VRAM) ? "VRAM" : "DRAM");
}
/*
* Common functions to directly access VIDC registers
*/
int
vidcvideo_write(u_int reg, int value)
{
int counter;
int *current;
int *tab;
tab = (int *)&vidc_lookup;
current = (int *)vidc_current;
/*
* OK, the VIDC_PALETTE register is handled differently
* to the others on the VIDC, so take that into account here
*/
if (reg == VIDC_PALREG) {
vidc_current->palreg = 0;
WriteWord(vidc_base, reg | value);
return 0;
}
if (reg == VIDC_PALETTE) {
WriteWord(vidc_base, reg | value);
vidc_current->palette[vidc_current->palreg] = value;
vidc_current->palreg++;
vidc_current->palreg = vidc_current->palreg & 0xff;
return 0;
}
/*
* Undefine SAFER if you wish to speed things up (a little)
* although this means the function will assume things abou
* the structure of vidc_state. i.e. the first 256 words are
* the palette array
*/
#define SAFER
#ifdef SAFER
#define INITVALUE 0
#else
#define INITVALUE 256
#endif
for (counter = INITVALUE;
counter <= sizeof(struct vidc_state);
counter++) {
if (reg == tab[counter]) {
WriteWord ( vidc_base, reg | value );
current[counter] = value;
return 0;
}
}
return -1;
}
void
vidcvideo_setpalette(struct vidc_state *vidc)
{
int counter = 0;
vidcvideo_write(VIDC_PALREG, 0x00000000);
for (counter = 0; counter <= 255; counter++)
vidcvideo_write(VIDC_PALETTE, vidc->palette[counter]);
}
void
vidcvideo_setstate(struct vidc_state *vidc)
{
vidcvideo_write ( VIDC_PALREG, vidc->palreg );
vidcvideo_write ( VIDC_BCOL, vidc->bcol );
vidcvideo_write ( VIDC_CP1, vidc->cp1 );
vidcvideo_write ( VIDC_CP2, vidc->cp2 );
vidcvideo_write ( VIDC_CP3, vidc->cp3 );
vidcvideo_write ( VIDC_HCR, vidc->hcr );
vidcvideo_write ( VIDC_HSWR, vidc->hswr );
vidcvideo_write ( VIDC_HBSR, vidc->hbsr );
vidcvideo_write ( VIDC_HDSR, vidc->hdsr );
vidcvideo_write ( VIDC_HDER, vidc->hder );
vidcvideo_write ( VIDC_HBER, vidc->hber );
vidcvideo_write ( VIDC_HCSR, vidc->hcsr );
vidcvideo_write ( VIDC_HIR, vidc->hir );
vidcvideo_write ( VIDC_VCR, vidc->vcr );
vidcvideo_write ( VIDC_VSWR, vidc->vswr );
vidcvideo_write ( VIDC_VBSR, vidc->vbsr );
vidcvideo_write ( VIDC_VDSR, vidc->vdsr );
vidcvideo_write ( VIDC_VDER, vidc->vder );
vidcvideo_write ( VIDC_VBER, vidc->vber );
vidcvideo_write ( VIDC_VCSR, vidc->vcsr );
vidcvideo_write ( VIDC_VCER, vidc->vcer );
/*
* Right, dunno what to set these to yet, but let's keep RiscOS's
* ones for now, until the time is right to finish this code
*/
/* vidcvideo_write ( VIDC_EREG, vidc->ereg ); */
/* vidcvideo_write ( VIDC_FSYNREG, vidc->fsynreg ); */
/* vidcvideo_write ( VIDC_CONREG, vidc->conreg ); */
/* vidcvideo_write ( VIDC_DCTL, vidc->dctl ); */
vidcvideo_setpalette(vidc);
}
void
vidcvideo_getstate(struct vidc_state *vidc)
{
*vidc = *vidc_current;
}
void
vidcvideo_getmode(struct vidc_mode *mode)
{
*mode = vidc_currentmode;
}
static int
vidcvideo_coldinit(void)
{
struct videomode const *modes;
unsigned besterror;
int count;
int i;
unsigned framerate;
/* Blank out the cursor */
vidcvideo_write(VIDC_CP1, 0x0);
vidcvideo_write(VIDC_CP2, 0x0);
vidcvideo_write(VIDC_CP3, 0x0);
dispbase = vmem_base = dispstart = videomemory.vidm_vbase;
phys_base = videomemory.vidm_pbase;
/* Nut - should be using videomemory.vidm_size - mark */
if (videomemory.vidm_type == VIDEOMEM_TYPE_DRAM) {
dispsize = videomemory.vidm_size;
transfersize = 16;
} else {
dispsize = bootconfig.vram[0].pages * PAGE_SIZE;
transfersize = dispsize >> 10;
}
ptov = dispbase - phys_base;
dispend = dispstart+dispsize;
if (vidc_videomode_count > 0) {
modes = vidc_videomode_list;
count = vidc_videomode_count;
} else {
modes = videomode_list;
count = videomode_count;
}
/* try to find the current mode from the bootloader in my table */
vidc_currentmode.timings = modes[0];
besterror = 1000000;
for (i = 0; i < count; i++) {
/* We don't support interlace or doublescan */
if (modes[i].flags & (VID_INTERLACE | VID_DBLSCAN))
continue;
/*
* We jump through a few hoops here to ensure that we
* round roughly to the nearest integer without too
* much danger of overflow.
*/
framerate = (modes[i].dot_clock * 1000 /
modes[i].htotal * 2 / modes[i].vtotal + 1) / 2;
if (modes[i].hdisplay == bootconfig.width + 1
&& modes[i].vdisplay == bootconfig.height + 1
&& abs(framerate - bootconfig.framerate) < besterror) {
vidc_currentmode.timings = modes[i];
besterror = abs(framerate - bootconfig.framerate);
}
}
vidc_currentmode.log2_bpp = bootconfig.log2_bpp;
dispstart = dispbase;
dispend = dispstart+dispsize;
IOMD_WRITE_WORD(IOMD_VIDINIT, dispstart-ptov);
IOMD_WRITE_WORD(IOMD_VIDSTART, dispstart-ptov);
IOMD_WRITE_WORD(IOMD_VIDEND, (dispend-transfersize)-ptov);
return 0;
}
/* simple function to abstract vidc variables ; returns virt start address of screen */
/* XXX asumption that video memory is mapped in twice */
void *vidcvideo_hwscroll(int bytes)
{
dispstart += bytes;
if (dispstart >= dispbase + dispsize) dispstart -= dispsize;
if (dispstart < dispbase) dispstart += dispsize;
dispend = dispstart+dispsize;
/* return the start of the bit map of the screen (left top) */
return (void *)dispstart;
}
/* reset the HW scroll to be at the start for the benefit of f.e. X */
void *vidcvideo_hwscroll_reset(void)
{
void *cookie = (void *)dispstart;
dispstart = dispbase;
dispend = dispstart + dispsize;
return cookie;
}
/* put HW scroll back to where it was */
void *vidcvideo_hwscroll_back(void *cookie)
{
dispstart = (int)cookie;
dispend = dispstart + dispsize;
return cookie;
}
/* this function is to be called perferably at vsync */
void vidcvideo_progr_scroll(void)
{
IOMD_WRITE_WORD(IOMD_VIDINIT, dispstart-ptov);
IOMD_WRITE_WORD(IOMD_VIDSTART, dispstart-ptov);
IOMD_WRITE_WORD(IOMD_VIDEND, (dispend-transfersize)-ptov);
}
/*
* Select a new mode by reprogramming the VIDC chip
* XXX this part is known not to work for 32bpp
*/
struct vidc_mode newmode;
static const int bpp_mask_table[] = {
0, /* 1bpp */
1, /* 2bpp */
2, /* 4bpp */
3, /* 8bpp */
4, /* 16bpp */
6 /* 32bpp */
};
void
vidcvideo_setmode(struct vidc_mode *mode)
{
struct videomode *vm;
int bpp_mask;
int ereg;
int best_r, best_v;
int least_error;
int r, v, f;
/*
* Find out what bit mask we need to or with the vidc20
* control register in order to generate the desired number of
* bits per pixel. log_bpp is log base 2 of the number of
* bits per pixel.
*/
bpp_mask = bpp_mask_table[mode->log2_bpp];
vidc_currentmode = *mode;
vm = &vidc_currentmode.timings;
least_error = INT_MAX;
best_r = 0; best_v = 0;
for (v = 63; v > 0; v--) {
for (r = 63; r > 0; r--) {
f = ((v * vidc_fref) /1000) / r;
if (least_error >= abs(f - vm->dot_clock)) {
least_error = abs(f - vm->dot_clock);
best_r = r;
best_v = v;
}
}
}
if (best_r > 63) best_r=63;
if (best_v > 63) best_v=63;
if (best_r < 1) best_r= 1;
if (best_v < 1) best_v= 1;
vidcvideo_write(VIDC_FSYNREG, (best_v-1)<<8 | (best_r-1)<<0);
/*
* The translation from struct videomode to VIDC timings is made
* fun by the fact that the VIDC counts from the start of the sync
* pulse while struct videomode counts from the start of the display.
*/
vidcvideo_write(VIDC_HSWR, (vm->hsync_end - vm->hsync_start - 8) & ~1);
vidcvideo_write(VIDC_HBSR, (vm->htotal - vm->hsync_start - 12) & ~1);
vidcvideo_write(VIDC_HDSR, (vm->htotal - vm->hsync_start - 18) & ~1);
vidcvideo_write(VIDC_HDER,
(vm->htotal - vm->hsync_start + vm->hdisplay - 18) & ~1);
vidcvideo_write(VIDC_HBER,
(vm->htotal - vm->hsync_start + vm->hdisplay - 12) & ~1);
vidcvideo_write(VIDC_HCR, (vm->htotal - 8) & ~3);
vidcvideo_write(VIDC_VSWR, vm->vsync_end - vm->vsync_start - 1);
vidcvideo_write(VIDC_VBSR, vm->vtotal - vm->vsync_start - 1);
vidcvideo_write(VIDC_VDSR, vm->vtotal - vm->vsync_start - 1);
vidcvideo_write(VIDC_VDER,
vm->vtotal - vm->vsync_start + vm->vdisplay - 1);
vidcvideo_write(VIDC_VBER,
vm->vtotal - vm->vsync_start + vm->vdisplay - 1);
/* XXX VIDC20 data sheet say to subtract 2 */
vidcvideo_write(VIDC_VCR, vm->vtotal - 1);
IOMD_WRITE_WORD(IOMD_FSIZE, vm->vtotal - vm->vdisplay - 1);
if (dispsize <= 1024*1024)
vidcvideo_write(VIDC_DCTL, vm->hdisplay>>2 | 1<<16 | 1<<12);
else
vidcvideo_write(VIDC_DCTL, vm->hdisplay>>2 | 3<<16 | 1<<12);
ereg = 1<<12;
if (vm->flags & VID_NHSYNC)
ereg |= 1<<16;
if (vm->flags & VID_NVSYNC)
ereg |= 1<<18;
vidcvideo_write(VIDC_EREG, ereg);
/*
* Set the video FIFO preload value and bit depth. Chapter 6
* of the VIDC20 Data Sheet has full details of the FIFO
* preload, but we don't do anything clever and just use the
* largest possible value, which is 7 when the VIDC20 is in
* 32-bit mode (0MB or 1MB VRAM) and 6 when it is in 64-bit
* mode (2MB VRAM).
*/
if (dispsize > 1024*1024)
vidcvideo_write(VIDC_CONREG, 6<<8 | bpp_mask<<5);
else
vidcvideo_write(VIDC_CONREG, 7<<8 | bpp_mask<<5);
}
#if 0
/* not used for now */
void
vidcvideo_set_display_base(base)
u_int base;
{
dispstart = dispstart-dispbase + base;
dispbase = vmem_base = base;
dispend = base + dispsize;
ptov = dispbase - phys_base;
}
#endif
/*
* Main initialisation routine for now
*/
static int cursor_init = 0;
int
vidcvideo_init(void)
{
vidcvideo_coldinit();
if (cold_init && (cursor_init == 0))
/* vidcvideo_flash_go() */;
/* setting a mode goes wrong in 32 bpp ... 8 and 16 seem OK */
vidcvideo_setmode(&vidc_currentmode);
vidcvideo_blank(0); /* display on */
vidcvideo_stdpalette();
if (cold_init == 0) {
vidcvideo_write(VIDC_CP1, 0x0);
vidcvideo_write(VIDC_CP2, 0x0);
vidcvideo_write(VIDC_CP3, 0x0);
} else
vidcvideo_cursor_init(CURSOR_MAX_WIDTH, CURSOR_MAX_HEIGHT);
cold_init = 1;
return 0;
}
/* reinitialise the vidcvideo */
void
vidcvideo_reinit()
{
vidcvideo_coldinit();
vidcvideo_setmode(&vidc_currentmode);
}
int
vidcvideo_cursor_init(int width, int height)
{
static char *cursor_data = NULL;
int counter;
int line;
paddr_t pa;
cursor_width = width;
cursor_height = height;
if (!cursor_data) {
/* Allocate cursor memory first time round */
cursor_data = (char *)uvm_km_alloc(kernel_map, PAGE_SIZE, 0,
UVM_KMF_WIRED | UVM_KMF_ZERO);
if (!cursor_data)
panic("Cannot allocate memory for hardware cursor");
(void) pmap_extract(pmap_kernel(), (vaddr_t)cursor_data, &pa);
IOMD_WRITE_WORD(IOMD_CURSINIT, pa);
}
/* Blank the cursor while initialising it's sprite */
vidcvideo_write ( VIDC_CP1, 0x0 );
vidcvideo_write ( VIDC_CP2, 0x0 );
vidcvideo_write ( VIDC_CP3, 0x0 );
cursor_normal = cursor_data;
cursor_transparent = cursor_data + (height * width);
cursor_transparent += 32; /* ALIGN */
cursor_transparent = (char *)((int)cursor_transparent & (~31) );
for ( line = 0; line<height; ++line ) {
for ( counter=0; counter<width/4;counter++ )
cursor_normal[line * width + counter]=0x55; /* why 0x55 ? */
for ( ; counter<8; counter++ )
cursor_normal[line * width + counter]=0;
}
for ( line = 0; line<height; ++line ) {
for ( counter=0; counter<width/4;counter++ )
cursor_transparent[line * width + counter]=0x00;
for ( ; counter<8; counter++ )
cursor_transparent[line * width + counter]=0;
}
(void) pmap_extract(pmap_kernel(), (vaddr_t)cursor_normal,
(void *)&p_cursor_normal);
(void) pmap_extract(pmap_kernel(), (vaddr_t)cursor_transparent,
(void *)&p_cursor_transparent);
memset(cursor_normal, 0x55, width*height); /* white? */
memset(cursor_transparent, 0x00, width*height);/* to see the diffence */
/* Ok, now program the cursor; should be blank */
vidcvideo_enablecursor(0);
return 0;
}
void
vidcvideo_updatecursor(int xcur, int ycur)
{
int frontporch = vidc_currentmode.timings.htotal -
vidc_currentmode.timings.hsync_start;
int topporch = vidc_currentmode.timings.vtotal -
vidc_currentmode.timings.vsync_start;
vidcvideo_write(VIDC_HCSR, frontporch -17 + xcur);
vidcvideo_write(VIDC_VCSR, topporch -2 + (ycur+1)-2 + 3 -
cursor_height);
vidcvideo_write(VIDC_VCER, topporch -2 + (ycur+3)+2 + 3 );
}
void
vidcvideo_enablecursor(int on)
{
if (on)
IOMD_WRITE_WORD(IOMD_CURSINIT,p_cursor_normal);
else
IOMD_WRITE_WORD(IOMD_CURSINIT,p_cursor_transparent);
vidcvideo_write ( VIDC_CP1, 0xffffff ); /* enable */
}
void
vidcvideo_stdpalette()
{
int i;
switch (vidc_currentmode.log2_bpp) {
case 0: /* 1 bpp */
case 1: /* 2 bpp */
case 2: /* 4 bpp */
case 3: /* 8 bpp */
vidcvideo_write(VIDC_PALREG, 0x00000000);
vidcvideo_write(VIDC_PALETTE, VIDC_COL( 0, 0, 0));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(255, 0, 0));
vidcvideo_write(VIDC_PALETTE, VIDC_COL( 0, 255, 0));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(255, 255, 0));
vidcvideo_write(VIDC_PALETTE, VIDC_COL( 0, 0, 255));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(255, 0, 255));
vidcvideo_write(VIDC_PALETTE, VIDC_COL( 0, 255, 255));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(255, 255, 255));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(128, 128, 128));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(255, 128, 128));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(128, 255, 128));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(255, 255, 128));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(128, 128, 255));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(255, 128, 255));
vidcvideo_write(VIDC_PALETTE, VIDC_COL(255, 255, 255));
break;
case 4: /* 16 bpp */
/*
* The use of the palette in 16-bit modes is quite
* fun. Comments in linux/drivers/video/acornfb.c
* imply that it goes something like this:
*
* red = LUT[pixel[7:0]].red
* green = LUT[pixel[11:4]].green
* blue = LUT[pixel[15:8]].blue
*
* We use 6:5:5 R:G:B cos that's what Xarm32VIDC wants.
*/
#define RBITS 6
#define GBITS 5
#define BBITS 5
vidcvideo_write(VIDC_PALREG, 0x00000000);
for (i = 0; i < 256; i++) {
int r, g, b;
r = i & ((1 << RBITS) - 1);
g = (i >> (RBITS - 4)) & ((1 << GBITS) - 1);
b = (i >> (RBITS + GBITS - 8)) & ((1 << BBITS) - 1);
vidcvideo_write(VIDC_PALETTE,
VIDC_COL(r << (8 - RBITS) | r >> (2 * RBITS - 8),
g << (8 - GBITS) | g >> (2 * GBITS - 8),
b << (8 - BBITS) | b >> (2 * BBITS - 8)));
}
break;
case 5: /* 32 bpp */
vidcvideo_write(VIDC_PALREG, 0x00000000);
for (i = 0; i < 256; i++)
vidcvideo_write(VIDC_PALETTE, VIDC_COL(i, i, i));
break;
}
}
int
vidcvideo_blank(int video_off)
{
int ereg;
ereg = 1<<12;
if (vidc_currentmode.timings.flags & VID_NHSYNC)
ereg |= 1<<16;
if (vidc_currentmode.timings.flags & VID_NVSYNC)
ereg |= 1<<18;
if (!video_off)
vidcvideo_write(VIDC_EREG, ereg);
else
vidcvideo_write(VIDC_EREG, 0);
return 0;
}
/* end of vidc20config.c */