NetBSD-5.0.2/sys/arch/arm/xscale/ixp425_npereg.h
/* $NetBSD: ixp425_npereg.h,v 1.1 2006/12/10 10:01:49 scw Exp $ */
/*-
* Copyright (c) 2006 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*
* $FreeBSD: src/sys/arm/xscale/ixp425/ixp425_npereg.h,v 1.1 2006/11/19 23:55:23 sam Exp $
*/
/*-
* Copyright (c) 2001-2005, Intel Corporation.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _IXP425_NPEREG_H_
#define _IXP425_NPEREG_H_
/* signature found as 1st word in a microcode image library */
#define IX_NPEDL_IMAGEMGR_SIGNATURE 0xDEADBEEF
/* marks end of header in a microcode image library */
#define IX_NPEDL_IMAGEMGR_END_OF_HEADER 0xFFFFFFFF
/*
* Intel (R) IXP400 Software NPE Image ID Definition
*
* Definition of NPE Image ID to be passed to ixNpeDlNpeInitAndStart()
* as input of type uint32_t which has the following fields format:
*
* Field [Bit Location]
* -----------------------------------
* Device ID [31 - 28]
* NPE ID [27 - 24]
* NPE Functionality ID [23 - 16]
* Major Release Number [15 - 8]
* Minor Release Number [7 - 0]
*/
#define IX_NPEDL_NPEID_FROM_IMAGEID_GET(imageId) \
(((imageId) >> 24) & 0xf)
#define IX_NPEDL_DEVICEID_FROM_IMAGEID_GET(imageId) \
(((imageId) >> 28) & 0xf)
#define IX_NPEDL_FUNCTIONID_FROM_IMAGEID_GET(imageId) \
(((imageId) >> 16) & 0xff)
#define IX_NPEDL_MAJOR_FROM_IMAGEID_GET(imageId) \
(((imageId) >> 8) & 0xff)
#define IX_NPEDL_MINOR_FROM_IMAGEID_GET(imageId) \
(((imageId) >> 0) & 0xff)
/*
* Instruction and Data Memory Size (in words) for each NPE
*/
#ifndef __ixp46X
#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEA 4096
#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEB 2048
#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEC 2048
#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA 2048
#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB 2048
#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC 2048
#else
#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEA 4096
#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEB 4096
#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEC 4096
#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA 4096
#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB 4096
#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC 4096
#endif
/* BAR offsets */
#define IX_NPEDL_REG_OFFSET_EXAD 0x00000000 /* Execution Address */
#define IX_NPEDL_REG_OFFSET_EXDATA 0x00000004 /* Execution Data */
#define IX_NPEDL_REG_OFFSET_EXCTL 0x00000008 /* Execution Control */
#define IX_NPEDL_REG_OFFSET_EXCT 0x0000000C /* Execution Count */
#define IX_NPEDL_REG_OFFSET_AP0 0x00000010 /* Action Point 0 */
#define IX_NPEDL_REG_OFFSET_AP1 0x00000014 /* Action Point 1 */
#define IX_NPEDL_REG_OFFSET_AP2 0x00000018 /* Action Point 2 */
#define IX_NPEDL_REG_OFFSET_AP3 0x0000001C /* Action Point 3 */
#define IX_NPEDL_REG_OFFSET_WFIFO 0x00000020 /* Watchpoint FIFO */
#define IX_NPEDL_REG_OFFSET_WC 0x00000024 /* Watch Count */
#define IX_NPEDL_REG_OFFSET_PROFCT 0x00000028 /* Profile Count */
#define IX_NPEDL_REG_OFFSET_STAT 0x0000002C /* Messaging Status */
#define IX_NPEDL_REG_OFFSET_CTL 0x00000030 /* Messaging Control */
#define IX_NPEDL_REG_OFFSET_MBST 0x00000034 /* Mailbox Status */
#define IX_NPEDL_REG_OFFSET_FIFO 0x00000038 /* Message FIFO */
/*
* Reset value for Mailbox (MBST) register
* NOTE that if used, it should be complemented with an NPE intruction
* to clear the Mailbox at the NPE side as well
*/
#define IX_NPEDL_REG_RESET_MBST 0x0000F0F0
#define IX_NPEDL_MASK_WFIFO_VALID 0x80000000 /* VALID bit */
#define IX_NPEDL_MASK_STAT_OFNE 0x00010000 /* OFNE bit */
#define IX_NPEDL_MASK_STAT_IFNE 0x00080000 /* IFNE bit */
/*
* EXCTL (Execution Control) Register commands
*/
#define IX_NPEDL_EXCTL_CMD_NPE_STEP 0x01 /* Step 1 instruction */
#define IX_NPEDL_EXCTL_CMD_NPE_START 0x02 /* Start execution */
#define IX_NPEDL_EXCTL_CMD_NPE_STOP 0x03 /* Stop execution */
#define IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE 0x04 /* Clear ins pipeline */
/*
* Read/write operations use address in EXAD and data in EXDATA.
*/
#define IX_NPEDL_EXCTL_CMD_RD_INS_MEM 0x10 /* Read ins memory */
#define IX_NPEDL_EXCTL_CMD_WR_INS_MEM 0x11 /* Write ins memory */
#define IX_NPEDL_EXCTL_CMD_RD_DATA_MEM 0x12 /* Read data memory */
#define IX_NPEDL_EXCTL_CMD_WR_DATA_MEM 0x13 /* Write data memory */
#define IX_NPEDL_EXCTL_CMD_RD_ECS_REG 0x14 /* Read ECS register */
#define IX_NPEDL_EXCTL_CMD_WR_ECS_REG 0x15 /* Write ECS register */
#define IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT 0x0C /* Clear Profile Count register */
/*
* EXCTL (Execution Control) Register status bit masks
*/
#define IX_NPEDL_EXCTL_STATUS_RUN 0x80000000
#define IX_NPEDL_EXCTL_STATUS_STOP 0x40000000
#define IX_NPEDL_EXCTL_STATUS_CLEAR 0x20000000
#define IX_NPEDL_EXCTL_STATUS_ECS_K 0x00800000 /* pipeline Klean */
/*
* Executing Context Stack (ECS) level registers
*/
#define IX_NPEDL_ECS_BG_CTXT_REG_0 0x00 /* reg 0 @ bg ctx */
#define IX_NPEDL_ECS_BG_CTXT_REG_1 0x01 /* reg 1 @ bg ctx */
#define IX_NPEDL_ECS_BG_CTXT_REG_2 0x02 /* reg 2 @ bg ctx */
#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0 0x04 /* reg 0 @ pri 1 ctx */
#define IX_NPEDL_ECS_PRI_1_CTXT_REG_1 0x05 /* reg 1 @ pri 1 ctx */
#define IX_NPEDL_ECS_PRI_1_CTXT_REG_2 0x06 /* reg 2 @ pri 1 ctx */
#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0 0x08 /* reg 0 @ pri 2 ctx */
#define IX_NPEDL_ECS_PRI_2_CTXT_REG_1 0x09 /* reg 1 @ pri 2 ctx */
#define IX_NPEDL_ECS_PRI_2_CTXT_REG_2 0x0A /* reg 2 @ pri 2 ctx */
#define IX_NPEDL_ECS_DBG_CTXT_REG_0 0x0C /* reg 0 @ debug ctx */
#define IX_NPEDL_ECS_DBG_CTXT_REG_1 0x0D /* reg 1 @ debug ctx */
#define IX_NPEDL_ECS_DBG_CTXT_REG_2 0x0E /* reg 2 @ debug ctx */
#define IX_NPEDL_ECS_INSTRUCT_REG 0x11 /* Instruction reg */
/*
* Execution Access register reset values
*/
#define IX_NPEDL_ECS_BG_CTXT_REG_0_RESET 0xA0000000
#define IX_NPEDL_ECS_BG_CTXT_REG_1_RESET 0x01000000
#define IX_NPEDL_ECS_BG_CTXT_REG_2_RESET 0x00008000
#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0_RESET 0x20000080
#define IX_NPEDL_ECS_PRI_1_CTXT_REG_1_RESET 0x01000000
#define IX_NPEDL_ECS_PRI_1_CTXT_REG_2_RESET 0x00008000
#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0_RESET 0x20000080
#define IX_NPEDL_ECS_PRI_2_CTXT_REG_1_RESET 0x01000000
#define IX_NPEDL_ECS_PRI_2_CTXT_REG_2_RESET 0x00008000
#define IX_NPEDL_ECS_DBG_CTXT_REG_0_RESET 0x20000000
#define IX_NPEDL_ECS_DBG_CTXT_REG_1_RESET 0x00000000
#define IX_NPEDL_ECS_DBG_CTXT_REG_2_RESET 0x001E0000
#define IX_NPEDL_ECS_INSTRUCT_REG_RESET 0x1003C00F
/*
* Masks used to read/write particular bits in Execution Access registers
*/
#define IX_NPEDL_MASK_ECS_REG_0_ACTIVE 0x80000000 /* Active bit */
#define IX_NPEDL_MASK_ECS_REG_0_NEXTPC 0x1FFF0000 /* NextPC bits */
#define IX_NPEDL_MASK_ECS_REG_0_LDUR 0x00000700 /* LDUR bits */
#define IX_NPEDL_MASK_ECS_REG_1_CCTXT 0x000F0000 /* NextPC bits */
#define IX_NPEDL_MASK_ECS_REG_1_SELCTXT 0x0000000F
#define IX_NPEDL_MASK_ECS_DBG_REG_2_IF 0x00100000 /* IF bit */
#define IX_NPEDL_MASK_ECS_DBG_REG_2_IE 0x00080000 /* IE bit */
/*
* Bit-Offsets from LSB of particular bit-fields in Execution Access registers.
*/
#define IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC 16
#define IX_NPEDL_OFFSET_ECS_REG_0_LDUR 8
#define IX_NPEDL_OFFSET_ECS_REG_1_CCTXT 16
#define IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT 0
/*
* NPE core & co-processor instruction templates to load into NPE Instruction
* Register, for read/write of NPE register file registers.
*/
/*
* Read an 8-bit NPE internal logical register
* and return the value in the EXDATA register (aligned to MSB).
* NPE Assembler instruction: "mov8 d0, d0 &&& DBG_WrExec"
*/
#define IX_NPEDL_INSTR_RD_REG_BYTE 0x0FC00000
/*
* Read a 16-bit NPE internal logical register
* and return the value in the EXDATA register (aligned to MSB).
* NPE Assembler instruction: "mov16 d0, d0 &&& DBG_WrExec"
*/
#define IX_NPEDL_INSTR_RD_REG_SHORT 0x0FC08010
/*
* Read a 16-bit NPE internal logical register
* and return the value in the EXDATA register.
* NPE Assembler instruction: "mov32 d0, d0 &&& DBG_WrExec"
*/
#define IX_NPEDL_INSTR_RD_REG_WORD 0x0FC08210
/*
* Write an 8-bit NPE internal logical register.
* NPE Assembler instruction: "mov8 d0, #0"
*/
#define IX_NPEDL_INSTR_WR_REG_BYTE 0x00004000
/*
* Write a 16-bit NPE internal logical register.
* NPE Assembler instruction: "mov16 d0, #0"
*/
#define IX_NPEDL_INSTR_WR_REG_SHORT 0x0000C000
/*
* Write a 16-bit NPE internal logical register.
* NPE Assembler instruction: "cprd32 d0 &&& DBG_RdInFIFO"
*/
#define IX_NPEDL_INSTR_RD_FIFO 0x0F888220
/*
* Reset Mailbox (MBST) register
* NPE Assembler instruction: "mov32 d0, d0 &&& DBG_ClearM"
*/
#define IX_NPEDL_INSTR_RESET_MBOX 0x0FAC8210
/*
* Bit-offsets from LSB, of particular bit-fields in an NPE instruction
*/
#define IX_NPEDL_OFFSET_INSTR_SRC 4 /* src operand */
#define IX_NPEDL_OFFSET_INSTR_DEST 9 /* dest operand */
#define IX_NPEDL_OFFSET_INSTR_COPROC 18 /* coprocessor ins */
/*
* Masks used to read/write particular bits of an NPE Instruction
*/
/**
* Mask the bits of 16-bit data value (least-sig 5 bits) to be used in
* SRC field of immediate-mode NPE instruction
*/
#define IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA 0x1F
/**
* Mask the bits of 16-bit data value (most-sig 11 bits) to be used in
* COPROC field of immediate-mode NPE instruction
*/
#define IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA 0xFFE0
/**
* LSB offset of the bit-field of 16-bit data value (most-sig 11 bits)
* to be used in COPROC field of immediate-mode NPE instruction
*/
#define IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA 5
/**
* Number of left-shifts required to align most-sig 11 bits of 16-bit
* data value into COPROC field of immediate-mode NPE instruction
*/
#define IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA \
(IX_NPEDL_OFFSET_INSTR_COPROC - IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA)
/**
* LDUR value used with immediate-mode NPE Instructions by the NpeDl
* for writing to NPE internal logical registers
*/
#define IX_NPEDL_WR_INSTR_LDUR 1
/**
* LDUR value used with NON-immediate-mode NPE Instructions by the NpeDl
* for reading from NPE internal logical registers
*/
#define IX_NPEDL_RD_INSTR_LDUR 0
/**
* NPE internal Context Store registers.
*/
typedef enum
{
IX_NPEDL_CTXT_REG_STEVT = 0, /**< identifies STEVT */
IX_NPEDL_CTXT_REG_STARTPC, /**< identifies STARTPC */
IX_NPEDL_CTXT_REG_REGMAP, /**< identifies REGMAP */
IX_NPEDL_CTXT_REG_CINDEX, /**< identifies CINDEX */
IX_NPEDL_CTXT_REG_MAX /**< Total number of Context Store registers */
} IxNpeDlCtxtRegNum;
/*
* NPE Context Store register logical addresses
*/
#define IX_NPEDL_CTXT_REG_ADDR_STEVT 0x0000001B
#define IX_NPEDL_CTXT_REG_ADDR_STARTPC 0x0000001C
#define IX_NPEDL_CTXT_REG_ADDR_REGMAP 0x0000001E
#define IX_NPEDL_CTXT_REG_ADDR_CINDEX 0x0000001F
/*
* NPE Context Store register reset values
*/
/**
* Reset value of STEVT NPE internal Context Store register
* (STEVT = off, 0x80)
*/
#define IX_NPEDL_CTXT_REG_RESET_STEVT 0x80
/**
* Reset value of STARTPC NPE internal Context Store register
* (STARTPC = 0x0000)
*/
#define IX_NPEDL_CTXT_REG_RESET_STARTPC 0x0000
/**
* Reset value of REGMAP NPE internal Context Store register
* (REGMAP = d0->p0, d8->p2, d16->p4)
*/
#define IX_NPEDL_CTXT_REG_RESET_REGMAP 0x0820
/**
* Reset value of CINDEX NPE internal Context Store register
* (CINDEX = 0)
*/
#define IX_NPEDL_CTXT_REG_RESET_CINDEX 0x00
/*
* Numeric range of context levels available on an NPE
*/
#define IX_NPEDL_CTXT_NUM_MIN 0
#define IX_NPEDL_CTXT_NUM_MAX 15
/**
* Number of Physical registers currently supported
* Initial NPE implementations will have a 32-word register file.
* Later implementations may have a 64-word register file.
*/
#define IX_NPEDL_TOTAL_NUM_PHYS_REG 32
/**
* LSB-offset of Regmap number in Physical NPE register address, used
* for Physical To Logical register address mapping in the NPE
*/
#define IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP 1
/**
* Mask to extract a logical NPE register address from a physical
* register address, used for Physical To Logical address mapping
*/
#define IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR 0x1
/*
* NPE Message/Mailbox interface.
*/
#define IX_NPESTAT IX_NPEDL_REG_OFFSET_STAT /* status register */
#define IX_NPECTL IX_NPEDL_REG_OFFSET_CTL /* control register */
#define IX_NPEFIFO IX_NPEDL_REG_OFFSET_FIFO /* FIFO register */
/* control register */
#define IX_NPECTL_OFE 0x00010000 /* output fifo enable */
#define IX_NPECTL_IFE 0x00020000 /* input fifo enable */
#define IX_NPECTL_OFWE 0x01000000 /* output fifo write enable */
#define IX_NPECTL_IFWE 0x02000000 /* input fifo write enable */
/* status register */
#define IX_NPESTAT_OFNE 0x00010000 /* output fifo not empty */
#define IX_NPESTAT_IFNF 0x00020000 /* input fifo not full */
#define IX_NPESTAT_OFNF 0x00040000 /* output fifo not full */
#define IX_NPESTAT_IFNE 0x00080000 /* input fifo not empty */
#define IX_NPESTAT_MBINT 0x00100000 /* Mailbox interrupt */
#define IX_NPESTAT_IFINT 0x00200000 /* input fifo interrupt */
#define IX_NPESTAT_OFINT 0x00400000 /* output fifo interrupt */
#define IX_NPESTAT_WFINT 0x00800000 /* watch fifo interrupt */
#endif /* _IXP425_NPEREG_H_ */