NetBSD-5.0.2/sys/arch/cesfic/dev/zs_pcc.c

Compare this file to the similar file:
Show the results in this format:

/*	$NetBSD: zs_pcc.c,v 1.9 2008/03/29 19:15:34 tsutsui Exp $	*/

/*
 * Copyright (c) 1997, 1999
 *	Matthias Drochner.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: zs_pcc.c,v 1.9 2008/03/29 19:15:34 tsutsui Exp $");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/device.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/ioctl.h>
#include <sys/tty.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <sys/syslog.h>

#include <dev/cons.h>
#include <dev/ic/z8530reg.h>
#include <machine/z8530var.h>

#include <machine/cpu.h>
#include <machine/autoconf.h>

#include <cesfic/cesfic/isr.h>

#include <cesfic/dev/zsvar.h>

extern void sic_enable_int(int, int, int, int, int);

static int	zsc_pcc_match(device_t, cfdata_t, void *);
static void	zsc_pcc_attach(device_t, device_t, void *);

static char *zsbase;

CFATTACH_DECL_NEW(zsc_pcc, sizeof(struct zsc_softc),
    zsc_pcc_match, zsc_pcc_attach, NULL, NULL);

static int
zsc_pcc_match(device_t parent, cfdata_t cf, void *aux)
{

	return (1);
}

static void
zsc_pcc_attach(device_t parent, device_t self, void *aux)
{
	struct zsc_softc *zsc = device_private(self);
	static int didintr;

	zsc->zsc_dev = self;

	if (!zsbase)
		mainbus_map(0x58000000, 0x10000, 0, (void *)&zsbase);

	/* Do common parts of SCC configuration. */
	zs_config(zsc, zsbase);

	/*
	 * Now safe to install interrupt handlers.  Note the arguments
	 * to the interrupt handlers aren't used.  Note, we only do this
	 * once since both SCCs interrupt at the same level and vector.
	 */
	if (didintr == 0) {
		didintr = 1;
		(void) isrlink(zshard, zsc, 4, ISRPRI_TTY);
		sic_enable_int(19, 0, 4, 4, 0);
	}
	zsc->zsc_softintr_cookie = softint_establish(SOFTINT_SERIAL,
	    (void (*)(void *))zsc_intr_soft, zsc);

	zs_write_reg(zsc->zsc_cs[0], 2, 0x18 + ZSHARD_PRI);
	zs_write_reg(zsc->zsc_cs[0], 9, ZSWR9_MASTER_IE);
}

void
zs_cnattach(void *base)
{

	zsbase = base;

	zs_cninit(zsbase);
}