# # $NetBSD: BEAGLEBOARD,v 1.2 2008/10/22 17:38:59 matt Exp $ # # BEAGLEBOARD -- TI OMAP 3530 Eval Board Kernel # include "arch/evbarm/conf/std.beagle" # estimated number of users maxusers 32 # Standard system options options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT #options NTP # NTP phase/frequency locked loop # CPU options options CPU_CORTEXA8 options OMAP_3530 options PMAPCOUNTERS # Architecture options # File systems file-system FFS # UFS #file-system LFS # log-structured file system file-system MFS # memory file system file-system NFS # Network file system #file-system ADOSFS # AmigaDOS-compatible file system #file-system EXT2FS # second extended file system (linux) #file-system CD9660 # ISO 9660 + Rock Ridge file system file-system MSDOSFS # MS-DOS file system #file-system FDESC # /dev/fd #file-system KERNFS # /kern #file-system NULLFS # loopback file system #file-system PORTAL # portal filesystem (still experimental) #file-system PROCFS # /proc #file-system UMAPFS # NULLFS + uid and gid remapping #file-system UNION # union file system file-system TMPFS # memory file system file-system PTYFS # /dev/pts/N support # File system options #options QUOTA # UFS quotas #options FFS_EI # FFS Endian Independant support #options NFSSERVER #options SOFTDEP options WAPBL # File system journaling support - Experimental #options FFS_NO_SNAPSHOT # No FFS snapshot support # Networking options #options GATEWAY # packet forwarding options INET # IP + ICMP + TCP + UDP options INET6 # IPV6 #options IPSEC # IP security #options IPSEC_ESP # IP security (encryption part; define w/ IPSEC) #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) #options IPSEC_DEBUG # debug for IP security #options MROUTING # IP multicast routing #options PIM # Protocol Independent Multicast #options NS # XNS #options NSIP # XNS tunneling over IP #options ISO,TPIP # OSI #options EON # OSI tunneling over IP #options CCITT,LLC,HDLC # X.25 #options NETATALK # AppleTalk networking #options PFIL_HOOKS # pfil(9) packet filter hooks #options PPP_BSDCOMP # BSD-Compress compression support for PPP #options PPP_DEFLATE # Deflate compression support for PPP #options PPP_FILTER # Active filter support for PPP (requires bpf) #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG options NFS_BOOT_BOOTP options NFS_BOOT_DHCP #options NFS_BOOT_BOOTSTATIC #options NFS_BOOTSTATIC_MYIP="\"192.168.1.4\"" #options NFS_BOOTSTATIC_GWIP="\"192.168.1.1\"" #options NFS_BOOTSTATIC_MASK="\"255.255.255.0\"" #options NFS_BOOTSTATIC_SERVADDR="\"192.168.1.1\"" #options NFS_BOOTSTATIC_SERVER="\"192.168.1.1:/nfs/sdp2430\"" options NFS_BOOT_RWSIZE=1024 # Compatibility options #options COMPAT_43 # 4.3BSD compatibility. options COMPAT_40 # NetBSD 4.0 compatibility. options COMPAT_30 # NetBSD 3.0 compatibility. #options COMPAT_20 # NetBSD 2.0 compatibility. #options COMPAT_16 # NetBSD 1.6 compatibility. #options COMPAT_15 # NetBSD 1.5 compatibility. #options COMPAT_14 # NetBSD 1.4 compatibility. #options COMPAT_13 # NetBSD 1.3 compatibility. #options COMPAT_12 # NetBSD 1.2 compatibility. #options COMPAT_11 # NetBSD 1.1 compatibility. #options COMPAT_10 # NetBSD 1.0 compatibility. #options COMPAT_09 # NetBSD 0.9 compatibility. #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. #options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. # Shared memory options options SYSVMSG # System V-like message queues options SYSVSEM # System V-like semaphores #options SEMMNI=10 # number of semaphore identifiers #options SEMMNS=60 # number of semaphores in system #options SEMUME=10 # max number of undo entries per process #options SEMMNU=30 # number of undo structures in system options SYSVSHM # System V-like memory sharing #options SHMMAXPGS=1024 # 1024 pages is the default # Device options #options MEMORY_DISK_HOOKS # boottime setup of ramdisk #options MEMORY_DISK_ROOT_SIZE=8192 # Size in blocks #options MEMORY_DISK_DYNAMIC #options MINIROOTSIZE=1000 # Size in blocks #options MEMORY_DISK_IS_ROOT # use memory disk as root # Miscellaneous kernel options options KTRACE # system call tracing, a la ktrace(1) #options LKM # loadable kernel modules #options KMEMSTATS # kernel memory statistics #options SCSIVERBOSE # Verbose SCSI errors #options MIIVERBOSE # Verbose MII autoconfuration messages #options DDB_KEYCODE=0x40 #options USERCONF # userconf(4) support #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) # Development and Debugging options #options PERFCTRS # performance counters options DIAGNOSTIC # internally consistency checks #options DEBUG #options PMAP_DEBUG # Enable pmap_debug_level code #options IPKDB # remote kernel debugging options VERBOSE_INIT_ARM # verbose bootstraping messages options DDB # in-kernel debugger options DDB_ONPANIC=1 options DDB_HISTORY_SIZE=100 # Enable history editing in DDB #options KGDB makeoptions DEBUG="-g" # compile full symbol table options SYMTAB_SPACE=300000 ## USB Debugging options options USB_DEBUG options OHCI_DEBUG options UHUB_DEBUG # Valid options for BOOT_ARGS: # single Boot to single user only # kdb Give control to kernel debugger # ask Ask for file name to reboot from # pmapdebug=<n> If PMAP_DEBUG, set pmap_debug_level to <n> # memorydisk=<n> Set memorydisk size to <n> KB # quiet Show aprint_naive output # verbose Show aprint_normal and aprint_verbose output options BOOT_ARGS="\"\"" config netbsd root on ? type ? # The main bus device mainbus0 at root # The boot cpu cpu0 at mainbus? # Specify the memory size in megabytes. options MEMSIZE=128 # L3 Interconnect L3i0 at mainbus? # OBIO obio0 at mainbus? base 0x48000000 size 0x1000000 # L4 CORE obio1 at mainbus? base 0x48300000 size 0x0040000 # L4 WAKEUP obio2 at mainbus? base 0x49000000 size 0x0100000 # L4 PERIPHERAL #obio3 at mainbus? base 0x54000000 size 0x0800000 # L4 EMUL # General Purpose Memory Controller gpmc0 at mainbus? base 0x6e000000 # Interrupt Controller omapicu0 at obio0 addr 0x48200000 size 0x1000 intrbase 0 omapgpio0 at obio1 addr 0x48310000 size 0x0400 intrbase 96 intr 29 #omapgpio1 at obio2 addr 0x49050000 size 0x0400 intrbase 128 intr 30 #omapgpio2 at obio2 addr 0x49052000 size 0x0400 intrbase 160 intr 31 #omapgpio3 at obio2 addr 0x49054000 size 0x0400 intrbase 192 intr 32 omapgpio4 at obio2 addr 0x49056000 size 0x0400 intrbase 224 intr 33 #omapgpio5 at obio2 addr 0x49058000 size 0x0400 intrbase 256 intr 34 gpio* at omapgpio? # # I2C Controller # omapi2c0 at tipb? addr 0xfffb3800 intr 36 mult 4 # iic* at omapi2c? # # omap's own i2c address # options OMAP_I2C_ADDRESS=0xe # # i2c bus clock low and high times in ns # options I2C_LOW_TIME_nSEC=1500 # options I2C_HIGH_TIME_nSEC=1000 # On-board 16550 UARTs com0 at obio2 addr 0x49020000 intr 74 mult 4 # UART3 (console) options CONSADDR=0x49020000, CONSPEED=57600 #options CONSADDR=0x49020000, CONSPEED=115200 # Operating System Timer omapmputmr0 at obio2 addr 0x49032000 intr 38 # GP Timer 2 # Statistics Timer omapmputmr1 at obio2 addr 0x49034000 intr 39 # GP Timer 3 # Microtime Reference Timer omapmputmr2 at obio2 addr 0x49036000 intr 40 # GP Timer 4 options OMAP_MPU_TIMER_CLOCK_FREQ=12000000 # Watchdog timers omapwdt32k* at obio2 addr 0x49030000 size 2048 # WDT3 #omapwdt32k* at obio1 addr 0x4830c000 size 2048 # WDT1 #omapwdt32k* at obio1 addr 0x48314000 size 2048 # WDT2 # On-board USB #ehci* at obio0 addr 0x48064800 size 0x0400 intr 77 #ohci* at obio0 addr 0x48064400 size 0x0400 intr 76 #usb* at ohci? #uhub* at usb? ##umass* at uhub? port ? configuration ? interface ? ##wd* at umass? #axe* at uhub? port ? configuration ? interface ? # Hardware clocking and power management options HWCLOCK options HWCLOCK_MACHINE="<arch/arm/omap/hwclock_omap1.h>" options OMAP_CK_REF_SPEED=12000000 # Pseudo-Devices # disk/mass storage pseudo-devices pseudo-device md 1 # memory disk device (ramdisk) #pseudo-device vnd # disk-like interface to files #pseudo-device fss 4 # file system snapshot device # network pseudo-devices pseudo-device bpfilter # Berkeley packet filter pseudo-device loop # network loopback #pseudo-device kttcp # network loopback # miscellaneous pseudo-devices pseudo-device pty # pseudo-terminals pseudo-device rnd # /dev/random and in-kernel generator #options RND_COM #pseudo-device clockctl # user control of clock subsystem pseudo-device ksyms # /dev/ksyms