/* $NetBSD: grf_gb.c,v 1.39 2008/04/28 20:23:19 martin Exp $ */ /*- * Copyright (c) 1996, 1997 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: grf_gb.c 1.18 93/08/13$ * * @(#)grf_gb.c 8.4 (Berkeley) 1/12/94 */ /* * Copyright (c) 1988 University of Utah. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: grf_gb.c 1.18 93/08/13$ * * @(#)grf_gb.c 8.4 (Berkeley) 1/12/94 */ /* * Graphics routines for the Gatorbox. * * Note: In the context of this system, "gator" and "gatorbox" both refer to * HP 987x0 graphics systems. "Gator" is not used for high res mono. * (as in 9837 Gator systems) */ #include <sys/cdefs.h> __KERNEL_RCSID(0, "$NetBSD: grf_gb.c,v 1.39 2008/04/28 20:23:19 martin Exp $"); #include <sys/param.h> #include <sys/systm.h> #include <sys/conf.h> #include <sys/device.h> #include <sys/errno.h> #include <sys/ioctl.h> #include <sys/proc.h> #include <sys/tty.h> #include <uvm/uvm_extern.h> #include <machine/autoconf.h> #include <machine/cpu.h> #include <dev/cons.h> #include <hp300/dev/dioreg.h> #include <hp300/dev/diovar.h> #include <hp300/dev/diodevs.h> #include <hp300/dev/intiovar.h> #include <hp300/dev/grfioctl.h> #include <hp300/dev/grfvar.h> #include <hp300/dev/grfreg.h> #include <hp300/dev/grf_gbreg.h> #include <hp300/dev/itevar.h> #include <hp300/dev/itereg.h> #include "ite.h" #define CRTC_DATA_LENGTH 0x0e static uint8_t crtc_init_data[CRTC_DATA_LENGTH] = { 0x29, 0x20, 0x23, 0x04, 0x30, 0x0b, 0x30, 0x30, 0x00, 0x0f, 0x00, 0x00, 0x00, 0x00 }; static int gb_init(struct grf_data *gp, int, uint8_t *); static int gb_mode(struct grf_data *gp, int, void *); static void gb_microcode(struct gboxfb *); static int gbox_intio_match(device_t, cfdata_t, void *); static void gbox_intio_attach(device_t, device_t, void *); static int gbox_dio_match(device_t, cfdata_t, void *); static void gbox_dio_attach(device_t, device_t, void *); int gboxcnattach(bus_space_tag_t, bus_addr_t, int); CFATTACH_DECL_NEW(gbox_intio, sizeof(struct grfdev_softc), gbox_intio_match, gbox_intio_attach, NULL, NULL); CFATTACH_DECL_NEW(gbox_dio, sizeof(struct grfdev_softc), gbox_dio_match, gbox_dio_attach, NULL, NULL); /* Gatorbox grf switch */ static struct grfsw gbox_grfsw = { GID_GATORBOX, GRFGATOR, "gatorbox", gb_init, gb_mode }; static int gbconscode; static void *gbconaddr; #if NITE > 0 static void gbox_init(struct ite_data *); static void gbox_deinit(struct ite_data *); static void gbox_putc(struct ite_data *, int, int, int, int); static void gbox_cursor(struct ite_data *, int); static void gbox_clear(struct ite_data *, int, int, int, int); static void gbox_scroll(struct ite_data *, int, int, int, int); static void gbox_windowmove(struct ite_data *, int, int, int, int, int, int, int); /* Gatorbox ite switch */ static struct itesw gbox_itesw = { gbox_init, gbox_deinit, gbox_clear, gbox_putc, gbox_cursor, gbox_scroll, ite_readbyte, ite_writeglyph }; #endif /* NITE > 0 */ static int gbox_intio_match(device_t parent, cfdata_t cf, void *aux) { struct intio_attach_args *ia = aux; struct grfreg *grf; if (strcmp("fb",ia->ia_modname) != 0) return 0; if (badaddr((void *)ia->ia_addr)) return 0; grf = (struct grfreg *)ia->ia_addr; if (grf->gr_id == DIO_DEVICE_ID_FRAMEBUFFER && grf->gr_id2 == DIO_DEVICE_SECID_GATORBOX) { return 1; } return 0; } static void gbox_intio_attach(device_t parent, device_t self, void *aux) { struct grfdev_softc *sc = device_private(self); struct intio_attach_args *ia = aux; void *grf; sc->sc_dev = self; grf = (void *)ia->ia_addr; sc->sc_scode = -1; /* XXX internal i/o */ sc->sc_isconsole = (sc->sc_scode == gbconscode); grfdev_attach(sc, gb_init, grf, &gbox_grfsw); } static int gbox_dio_match(device_t parent, cfdata_t match, void *aux) { struct dio_attach_args *da = aux; if (da->da_id == DIO_DEVICE_ID_FRAMEBUFFER && da->da_secid == DIO_DEVICE_SECID_GATORBOX) return 1; return 0; } static void gbox_dio_attach(device_t parent, device_t self, void *aux) { struct grfdev_softc *sc = device_private(self); struct dio_attach_args *da = aux; bus_space_handle_t bsh; void *grf; sc->sc_dev = self; sc->sc_scode = da->da_scode; if (sc->sc_scode == gbconscode) grf = gbconaddr; else { if (bus_space_map(da->da_bst, da->da_addr, da->da_size, 0, &bsh)) { aprint_error(": can't map framebuffer\n"); return; } grf = bus_space_vaddr(da->da_bst, bsh); } sc->sc_isconsole = (sc->sc_scode == gbconscode); grfdev_attach(sc, gb_init, grf, &gbox_grfsw); } /* * Initialize hardware. * Must point g_display at a grfinfo structure describing the hardware. * Returns 0 if hardware not present, non-zero ow. */ int gb_init(struct grf_data *gp, int scode, uint8_t *addr) { struct gboxfb *gbp; struct grfinfo *gi = &gp->g_display; volatile uint8_t *fbp; uint8_t save; int fboff; /* * If the console has been initialized, and it was us, there's * no need to repeat this. */ if (scode != gbconscode) { gbp = (struct gboxfb *)addr; if (ISIIOVA(addr)) gi->gd_regaddr = (void *)IIOP(addr); else gi->gd_regaddr = dio_scodetopa(scode); gi->gd_regsize = 0x10000; gi->gd_fbwidth = 1024; /* XXX */ gi->gd_fbheight = 1024; /* XXX */ gi->gd_fbsize = gi->gd_fbwidth * gi->gd_fbheight; fboff = (gbp->fbomsb << 8) | gbp->fbolsb; gi->gd_fbaddr = (void *)(*(addr + fboff) << 16); gp->g_regkva = addr; gp->g_fbkva = iomap(gi->gd_fbaddr, gi->gd_fbsize); gi->gd_dwidth = 1024; /* XXX */ gi->gd_dheight = 768; /* XXX */ gi->gd_planes = 0; /* how do we do this? */ /* * The minimal info here is from the Gatorbox X driver. */ fbp = gp->g_fbkva; gbp->write_protect = 0; gbp->interrupt = 4; /** fb_enable ? **/ gbp->rep_rule = 3; /* GXcopy */ gbp->blink1 = 0xff; gbp->blink2 = 0xff; gb_microcode(gbp); /* * Find out how many colors are available by determining * which planes are installed. That is, write all ones to * a frame buffer location, see how many ones are read back. */ save = *fbp; *fbp = 0xFF; gi->gd_colors = *fbp + 1; *fbp = save; } return 1; } /* * Program the 6845. */ void gb_microcode(struct gboxfb *gbp) { int i; for (i = 0; i < CRTC_DATA_LENGTH; i++) { gbp->crtc_address = i; gbp->crtc_data = crtc_init_data[i]; } } /* * Change the mode of the display. * Right now all we can do is grfon/grfoff. * Return a UNIX error number or 0 for success. */ int gb_mode(struct grf_data *gp, int cmd, void *data) { struct gboxfb *gbp; int error = 0; gbp = (struct gboxfb *)gp->g_regkva; switch (cmd) { case GM_GRFON: gbp->sec_interrupt = 1; break; case GM_GRFOFF: break; /* * Remember UVA of mapping for GCDESCRIBE. * XXX this should be per-process. */ case GM_MAP: gp->g_data = data; break; case GM_UNMAP: gp->g_data = 0; break; default: error = EINVAL; break; } return error; } #if NITE > 0 /* * Gatorbox ite routines */ #define REGBASE ((struct gboxfb *)(ip->regbase)) #define WINDOWMOVER gbox_windowmove static void gbox_init(struct ite_data *ip) { /* XXX */ if (ip->regbase == 0) { struct grf_data *gp = ip->grf; ip->regbase = gp->g_regkva; ip->fbbase = gp->g_fbkva; ip->fbwidth = gp->g_display.gd_fbwidth; ip->fbheight = gp->g_display.gd_fbheight; ip->dwidth = gp->g_display.gd_dwidth; ip->dheight = gp->g_display.gd_dheight; } REGBASE->write_protect = 0x0; REGBASE->interrupt = 0x4; REGBASE->rep_rule = RR_COPY; REGBASE->blink1 = 0xff; REGBASE->blink2 = 0xff; gb_microcode((struct gboxfb *)ip->regbase); REGBASE->sec_interrupt = 0x01; /* * Set up the color map entries. We use three entries in the * color map. The first, is for black, the second is for * white, and the very last entry is for the inverted cursor. */ REGBASE->creg_select = 0x00; REGBASE->cmap_red = 0x00; REGBASE->cmap_grn = 0x00; REGBASE->cmap_blu = 0x00; REGBASE->cmap_write = 0x00; gbcm_waitbusy(ip->regbase); REGBASE->creg_select = 0x01; REGBASE->cmap_red = 0xFF; REGBASE->cmap_grn = 0xFF; REGBASE->cmap_blu = 0xFF; REGBASE->cmap_write = 0x01; gbcm_waitbusy(ip->regbase); REGBASE->creg_select = 0xFF; REGBASE->cmap_red = 0xFF; REGBASE->cmap_grn = 0xFF; REGBASE->cmap_blu = 0xFF; REGBASE->cmap_write = 0x01; gbcm_waitbusy(ip->regbase); ite_fontinfo(ip); ite_fontinit(ip); /* * Clear the display. This used to be before the font unpacking * but it crashes. Figure it out later. */ gbox_windowmove(ip, 0, 0, 0, 0, ip->dheight, ip->dwidth, RR_CLEAR); tile_mover_waitbusy(ip->regbase); /* * Stash the inverted cursor. */ gbox_windowmove(ip, charY(ip, ' '), charX(ip, ' '), ip->cblanky, ip->cblankx, ip->ftheight, ip->ftwidth, RR_COPYINVERTED); } static void gbox_deinit(struct ite_data *ip) { gbox_windowmove(ip, 0, 0, 0, 0, ip->dheight, ip->dwidth, RR_CLEAR); tile_mover_waitbusy(ip->regbase); ip->flags &= ~ITE_INITED; } static void gbox_putc(struct ite_data *ip, int c, int dy, int dx, int mode) { int wrr = ((mode == ATTR_INV) ? RR_COPYINVERTED : RR_COPY); gbox_windowmove(ip, charY(ip, c), charX(ip, c), dy * ip->ftheight, dx * ip->ftwidth, ip->ftheight, ip->ftwidth, wrr); } static void gbox_cursor(struct ite_data *ip, int flag) { if (flag == DRAW_CURSOR) draw_cursor(ip) else if (flag == MOVE_CURSOR) { erase_cursor(ip) draw_cursor(ip) } else erase_cursor(ip) } static void gbox_clear(struct ite_data *ip, int sy, int sx, int h, int w) { gbox_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth, sy * ip->ftheight, sx * ip->ftwidth, h * ip->ftheight, w * ip->ftwidth, RR_CLEAR); } #define gbox_blockmove(ip, sy, sx, dy, dx, h, w) \ gbox_windowmove((ip), \ (sy) * ip->ftheight, \ (sx) * ip->ftwidth, \ (dy) * ip->ftheight, \ (dx) * ip->ftwidth, \ (h) * ip->ftheight, \ (w) * ip->ftwidth, \ RR_COPY) static void gbox_scroll(struct ite_data *ip, int sy, int sx, int count, int dir) { int height, dy, i; tile_mover_waitbusy(ip->regbase); REGBASE->write_protect = 0x0; if (dir == SCROLL_UP) { dy = sy - count; height = ip->rows - sy; for (i = 0; i < height; i++) gbox_blockmove(ip, sy + i, sx, dy + i, 0, 1, ip->cols); } else if (dir == SCROLL_DOWN) { dy = sy + count; height = ip->rows - dy; for (i = (height - 1); i >= 0; i--) gbox_blockmove(ip, sy + i, sx, dy + i, 0, 1, ip->cols); } else if (dir == SCROLL_RIGHT) { gbox_blockmove(ip, sy, sx, sy, sx + count, 1, ip->cols - (sx + count)); } else { gbox_blockmove(ip, sy, sx, sy, sx - count, 1, ip->cols - sx); } } static void gbox_windowmove(struct ite_data *ip, int sy, int sx, int dy, int dx, int h, int w, int mask) { int src, dest; src = (sy * 1024) + sx; /* upper left corner in pixels */ dest = (dy * 1024) + dx; tile_mover_waitbusy(ip->regbase); REGBASE->width = -(w / 4); REGBASE->height = -(h / 4); if (src < dest) REGBASE->rep_rule = MOVE_DOWN_RIGHT|mask; else { REGBASE->rep_rule = MOVE_UP_LEFT|mask; /* * Adjust to top of lower right tile of the block. */ src = src + ((h - 4) * 1024) + (w - 4); dest= dest + ((h - 4) * 1024) + (w - 4); } FBBASE[dest] = FBBASE[src]; } /* * Gatorbox console support */ int gboxcnattach(bus_space_tag_t bst, bus_addr_t addr, int scode) { bus_space_handle_t bsh; void *va; struct grfreg *grf; struct grf_data *gp = &grf_cn; int size; if (bus_space_map(bst, addr, PAGE_SIZE, 0, &bsh)) return 1; va = bus_space_vaddr(bst, bsh); grf = (struct grfreg *)va; if (badaddr(va) || (grf->gr_id != GRFHWID) || (grf->gr_id2 != GID_GATORBOX)) { bus_space_unmap(bst, bsh, PAGE_SIZE); return 1; } size = DIO_SIZE(scode, va); bus_space_unmap(bst, bsh, PAGE_SIZE); if (bus_space_map(bst, addr, size, 0, &bsh)) return 1; va = bus_space_vaddr(bst, bsh); /* * Initialize the framebuffer hardware. */ (void)gb_init(gp, scode, va); gbconscode = scode; gbconaddr = va; /* * Set up required grf data. */ gp->g_sw = &gbox_grfsw; gp->g_display.gd_id = gp->g_sw->gd_swid; gp->g_flags = GF_ALIVE; /* * Initialize the terminal emulator. */ itedisplaycnattach(gp, &gbox_itesw); return 0; } #endif /* NITE > 0 */