NetBSD-5.0.2/sys/arch/hp300/dev/grf_rb.c
/* $NetBSD: grf_rb.c,v 1.40 2008/04/28 20:23:19 martin Exp $ */
/*-
* Copyright (c) 1996, 1997 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: grf_rb.c 1.15 93/08/13$
*
* @(#)grf_rb.c 8.4 (Berkeley) 1/12/94
*/
/*
* Copyright (c) 1988 University of Utah.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: grf_rb.c 1.15 93/08/13$
*
* @(#)grf_rb.c 8.4 (Berkeley) 1/12/94
*/
/*
* Graphics routines for the Renaissance, HP98720 Graphics system.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: grf_rb.c,v 1.40 2008/04/28 20:23:19 martin Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/device.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/proc.h>
#include <sys/tty.h>
#include <uvm/uvm_extern.h>
#include <machine/autoconf.h>
#include <machine/cpu.h>
#include <dev/cons.h>
#include <hp300/dev/dioreg.h>
#include <hp300/dev/diovar.h>
#include <hp300/dev/diodevs.h>
#include <hp300/dev/intiovar.h>
#include <hp300/dev/grfioctl.h>
#include <hp300/dev/grfvar.h>
#include <hp300/dev/grfreg.h>
#include <hp300/dev/grf_rbreg.h>
#include <hp300/dev/itevar.h>
#include <hp300/dev/itereg.h>
#include "ite.h"
static int rb_init(struct grf_data *gp, int, uint8_t *);
static int rb_mode(struct grf_data *gp, int, void *);
static int rbox_intio_match(device_t, cfdata_t, void *);
static void rbox_intio_attach(device_t, device_t, void *);
static int rbox_dio_match(device_t, cfdata_t, void *);
static void rbox_dio_attach(device_t, device_t, void *);
int rboxcnattach(bus_space_tag_t, bus_addr_t, int);
CFATTACH_DECL_NEW(rbox_intio, sizeof(struct grfdev_softc),
rbox_intio_match, rbox_intio_attach, NULL, NULL);
CFATTACH_DECL_NEW(rbox_dio, sizeof(struct grfdev_softc),
rbox_dio_match, rbox_dio_attach, NULL, NULL);
/* Renaissance grf switch */
static struct grfsw rbox_grfsw = {
GID_RENAISSANCE, GRFRBOX, "renaissance", rb_init, rb_mode
};
static int rbconscode;
static void *rbconaddr;
#if NITE > 0
static void rbox_init(struct ite_data *);
static void rbox_deinit(struct ite_data *);
static void rbox_putc(struct ite_data *, int, int, int, int);
static void rbox_cursor(struct ite_data *, int);
static void rbox_clear(struct ite_data *, int, int, int, int);
static void rbox_scroll(struct ite_data *, int, int, int, int);
static void rbox_windowmove(struct ite_data *, int, int, int, int,
int, int, int);
/* Renaissance ite switch */
static struct itesw rbox_itesw = {
rbox_init, rbox_deinit, rbox_clear, rbox_putc,
rbox_cursor, rbox_scroll, ite_readbyte, ite_writeglyph
};
#endif /* NITE > 0 */
static int
rbox_intio_match(device_t parent, cfdata_t cf, void *aux)
{
struct intio_attach_args *ia = aux;
struct grfreg *grf;
if (strcmp("fb",ia->ia_modname) != 0)
return 0;
if (badaddr((void *)ia->ia_addr))
return 0;
grf = (struct grfreg *)ia->ia_addr;
if (grf->gr_id == DIO_DEVICE_ID_FRAMEBUFFER &&
grf->gr_id2 == DIO_DEVICE_SECID_RENASSIANCE) {
return 1;
}
return 0;
}
static void
rbox_intio_attach(device_t parent, device_t self, void *aux)
{
struct grfdev_softc *sc = device_private(self);
struct intio_attach_args *ia = aux;
void *grf;
sc->sc_dev = self;
grf = (void *)ia->ia_addr;
sc->sc_scode = -1; /* XXX internal i/o */
sc->sc_isconsole = (sc->sc_scode == rbconscode);
grfdev_attach(sc, rb_init, grf, &rbox_grfsw);
}
static int
rbox_dio_match(device_t parent, cfdata_t cf, void *aux)
{
struct dio_attach_args *da = aux;
if (da->da_id == DIO_DEVICE_ID_FRAMEBUFFER &&
da->da_secid == DIO_DEVICE_SECID_RENASSIANCE)
return 1;
return 0;
}
static void
rbox_dio_attach(device_t parent, device_t self, void *aux)
{
struct grfdev_softc *sc = device_private(self);
struct dio_attach_args *da = aux;
bus_space_handle_t bsh;
void *grf;
sc->sc_dev = self;
sc->sc_scode = da->da_scode;
if (sc->sc_scode == rbconscode)
grf = rbconaddr;
else {
if (bus_space_map(da->da_bst, da->da_addr, da->da_size,
0, &bsh)) {
aprint_error(": can't map framebuffer\n");
return;
}
grf = bus_space_vaddr(da->da_bst, bsh);
}
sc->sc_isconsole = (sc->sc_scode == rbconscode);
grfdev_attach(sc, rb_init, grf, &rbox_grfsw);
}
/*
* Initialize hardware.
* Must point g_display at a grfinfo structure describing the hardware.
* Returns 0 if hardware not present, non-zero ow.
*/
static int
rb_init(struct grf_data *gp, int scode, uint8_t *addr)
{
struct rboxfb *rbp;
struct grfinfo *gi = &gp->g_display;
int fboff;
/*
* If the console has been initialized, and it was us, there's
* no need to repeat this.
*/
if (scode != rbconscode) {
rbp = (struct rboxfb *)addr;
if (ISIIOVA(addr))
gi->gd_regaddr = (void *)IIOP(addr);
else
gi->gd_regaddr = dio_scodetopa(scode);
gi->gd_regsize = 0x20000;
gi->gd_fbwidth = (rbp->fbwmsb << 8) | rbp->fbwlsb;
gi->gd_fbheight = (rbp->fbhmsb << 8) | rbp->fbhlsb;
gi->gd_fbsize = gi->gd_fbwidth * gi->gd_fbheight;
fboff = (rbp->fbomsb << 8) | rbp->fbolsb;
gi->gd_fbaddr = (void *)(*(addr + fboff) << 16);
if ((vaddr_t)gi->gd_regaddr >= DIOIIBASE) {
/*
* For DIO II space the fbaddr just computed is
* the offset from the select code base (regaddr)
* of the framebuffer. Hence it is also implicitly
* the size of the set.
*/
gi->gd_regsize = (int)gi->gd_fbaddr;
gi->gd_fbaddr += (int)gi->gd_regaddr;
gp->g_regkva = addr;
gp->g_fbkva = addr + gi->gd_regsize;
} else {
/*
* For DIO space we need to map the separate
* framebuffer.
*/
gp->g_regkva = addr;
gp->g_fbkva = iomap(gi->gd_fbaddr, gi->gd_fbsize);
}
gi->gd_dwidth = (rbp->dwmsb << 8) | rbp->dwlsb;
gi->gd_dheight = (rbp->dwmsb << 8) | rbp->dwlsb;
gi->gd_planes = 0; /* ?? */
gi->gd_colors = 256;
}
return 1;
}
/*
* Change the mode of the display.
* Right now all we can do is grfon/grfoff.
* Return a UNIX error number or 0 for success.
*/
static int
rb_mode(struct grf_data *gp, int cmd, void *data)
{
struct rboxfb *rbp;
int error = 0;
rbp = (struct rboxfb *) gp->g_regkva;
switch (cmd) {
/*
* The minimal info here is from the Renaissance X driver.
*/
case GM_GRFON:
case GM_GRFOFF:
break;
case GM_GRFOVON:
rbp->write_enable = 0;
rbp->opwen = 0xF;
rbp->drive = 0x10;
break;
case GM_GRFOVOFF:
rbp->opwen = 0;
rbp->write_enable = 0xffffffff;
rbp->drive = 0x01;
break;
/*
* Remember UVA of mapping for GCDESCRIBE.
* XXX this should be per-process.
*/
case GM_MAP:
gp->g_data = data;
break;
case GM_UNMAP:
gp->g_data = 0;
break;
default:
error = EINVAL;
break;
}
return error;
}
#if NITE > 0
/*
* Renaissance ite routines
*/
#define REGBASE ((struct rboxfb *)(ip->regbase))
#define WINDOWMOVER rbox_windowmove
static void
rbox_init(struct ite_data *ip)
{
int i;
/* XXX */
if (ip->regbase == 0) {
struct grf_data *gp = ip->grf;
ip->regbase = gp->g_regkva;
ip->fbbase = gp->g_fbkva;
ip->fbwidth = gp->g_display.gd_fbwidth;
ip->fbheight = gp->g_display.gd_fbheight;
ip->dwidth = gp->g_display.gd_dwidth;
ip->dheight = gp->g_display.gd_dheight;
/*
* XXX some displays (e.g. the davinci) appear
* to return a display height greater than the
* returned FB height. Guess we should go back
* to getting the display dimensions from the
* fontrom...
*/
if (ip->dwidth > ip->fbwidth)
ip->dwidth = ip->fbwidth;
if (ip->dheight > ip->fbheight)
ip->dheight = ip->fbheight;
}
rb_waitbusy(ip->regbase);
REGBASE->reset = 0x39;
DELAY(1000);
REGBASE->interrupt = 0x04;
REGBASE->display_enable = 0x01;
REGBASE->video_enable = 0x01;
REGBASE->drive = 0x01;
REGBASE->vdrive = 0x0;
ite_fontinfo(ip);
REGBASE->opwen = 0xFF;
/*
* Clear the framebuffer.
*/
rbox_windowmove(ip, 0, 0, 0, 0, ip->fbheight, ip->fbwidth, RR_CLEAR);
rb_waitbusy(ip->regbase);
for(i = 0; i < 16; i++) {
*(ip->regbase + 0x63c3 + i*4) = 0x0;
*(ip->regbase + 0x6403 + i*4) = 0x0;
*(ip->regbase + 0x6803 + i*4) = 0x0;
*(ip->regbase + 0x6c03 + i*4) = 0x0;
*(ip->regbase + 0x73c3 + i*4) = 0x0;
*(ip->regbase + 0x7403 + i*4) = 0x0;
*(ip->regbase + 0x7803 + i*4) = 0x0;
*(ip->regbase + 0x7c03 + i*4) = 0x0;
}
REGBASE->rep_rule = 0x33;
/*
* I cannot figure out how to make the blink planes stop. So, we
* must set both colormaps so that when the planes blink, and
* the secondary colormap is active, we still get text.
*/
CM1RED[0x00].value = 0x00;
CM1GRN[0x00].value = 0x00;
CM1BLU[0x00].value = 0x00;
CM1RED[0x01].value = 0xFF;
CM1GRN[0x01].value = 0xFF;
CM1BLU[0x01].value = 0xFF;
CM2RED[0x00].value = 0x00;
CM2GRN[0x00].value = 0x00;
CM2BLU[0x00].value = 0x00;
CM2RED[0x01].value = 0xFF;
CM2GRN[0x01].value = 0xFF;
CM2BLU[0x01].value = 0xFF;
REGBASE->blink = 0x00;
REGBASE->write_enable = 0x01;
REGBASE->opwen = 0x00;
ite_fontinit(ip);
/*
* Stash the inverted cursor.
*/
rbox_windowmove(ip, charY(ip, ' '), charX(ip, ' '),
ip->cblanky, ip->cblankx, ip->ftheight,
ip->ftwidth, RR_COPYINVERTED);
}
static void
rbox_deinit(struct ite_data *ip)
{
rbox_windowmove(ip, 0, 0, 0, 0, ip->fbheight, ip->fbwidth, RR_CLEAR);
rb_waitbusy(ip->regbase);
ip->flags &= ~ITE_INITED;
}
static void
rbox_putc(struct ite_data *ip, int c, int dy, int dx, int mode)
{
int wrr = ((mode == ATTR_INV) ? RR_COPYINVERTED : RR_COPY);
rbox_windowmove(ip, charY(ip, c), charX(ip, c),
dy * ip->ftheight, dx * ip->ftwidth,
ip->ftheight, ip->ftwidth, wrr);
}
static void
rbox_cursor(struct ite_data *ip, int flag)
{
if (flag == DRAW_CURSOR)
draw_cursor(ip)
else if (flag == MOVE_CURSOR) {
erase_cursor(ip)
draw_cursor(ip)
}
else
erase_cursor(ip)
}
static void
rbox_clear(struct ite_data *ip, int sy, int sx, int h, int w)
{
rbox_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth,
sy * ip->ftheight, sx * ip->ftwidth,
h * ip->ftheight, w * ip->ftwidth,
RR_CLEAR);
}
static void
rbox_scroll(struct ite_data *ip, int sy, int sx, int count, int dir)
{
int dy;
int dx = sx;
int height = 1;
int width = ip->cols;
if (dir == SCROLL_UP) {
dy = sy - count;
height = ip->rows - sy;
}
else if (dir == SCROLL_DOWN) {
dy = sy + count;
height = ip->rows - dy - 1;
}
else if (dir == SCROLL_RIGHT) {
dy = sy;
dx = sx + count;
width = ip->cols - dx;
}
else {
dy = sy;
dx = sx - count;
width = ip->cols - sx;
}
rbox_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth,
dy * ip->ftheight, dx * ip->ftwidth,
height * ip->ftheight,
width * ip->ftwidth, RR_COPY);
}
static void
rbox_windowmove(struct ite_data *ip, int sy, int sx, int dy, int dx, int h,
int w, int func)
{
struct rboxfb *rp = REGBASE;
if (h == 0 || w == 0)
return;
rb_waitbusy(ip->regbase);
rp->rep_rule = func << 4 | func;
rp->source_y = sy;
rp->source_x = sx;
rp->dest_y = dy;
rp->dest_x = dx;
rp->wheight = h;
rp->wwidth = w;
rp->wmove = 1;
}
/*
* Renaissance console support
*/
int
rboxcnattach(bus_space_tag_t bst, bus_addr_t addr, int scode)
{
bus_space_handle_t bsh;
void *va;
struct grfreg *grf;
struct grf_data *gp = &grf_cn;
int size;
if (bus_space_map(bst, addr, PAGE_SIZE, 0, &bsh))
return 1;
va = bus_space_vaddr(bst, bsh);
grf = (struct grfreg *)va;
if (badaddr(va) ||
(grf->gr_id != GRFHWID) || (grf->gr_id2 != GID_RENAISSANCE)) {
bus_space_unmap(bst, bsh, PAGE_SIZE);
return 1;
}
size = DIO_SIZE(scode, va);
bus_space_unmap(bst, bsh, PAGE_SIZE);
if (bus_space_map(bst, addr, size, 0, &bsh))
return 1;
va = bus_space_vaddr(bst, bsh);
/*
* Initialize the framebuffer hardware.
*/
(void)rb_init(gp, scode, va);
rbconscode = scode;
rbconaddr = va;
/*
* Set up required grf data.
*/
gp->g_sw = &rbox_grfsw;
gp->g_display.gd_id = gp->g_sw->gd_swid;
gp->g_flags = GF_ALIVE;
/*
* Initialize the terminal emulator.
*/
itedisplaycnattach(gp, &rbox_itesw);
return 0;
}
#endif /* NITE > 0 */