NetBSD-5.0.2/sys/arch/rs6000/mca/mca_machdep.c
/* $NetBSD: mca_machdep.c,v 1.2 2008/04/28 20:23:34 martin Exp $ */
/*-
* Copyright (c) 2000, 2001 The NetBSD Foundation, Inc.
* Copyright (c) 1996-1999 Scott D. Telford.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Scott Telford <s.telford@ed.ac.uk> and Jaromir Dolecek
* <jdolecek@NetBSD.org>.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Machine-specific functions for MCA autoconfiguration.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: mca_machdep.c,v 1.2 2008/04/28 20:23:34 martin Exp $");
#include <sys/types.h>
#include <sys/param.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/systm.h>
#include <sys/syslog.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <powerpc/pio.h>
#define _POWERPC_BUS_DMA_PRIVATE
#include <machine/bus.h>
#include <dev/mca/mcavar.h>
#include <dev/mca/mcareg.h>
#include "opt_mcaverbose.h"
#ifdef UNUSED
static void _mca_bus_dmamap_sync(bus_dma_tag_t, bus_dmamap_t,
bus_addr_t, bus_size_t, int);
#endif
/*
* For now, we use MCA DMA to 0-16M always. Some IBM PS/2 have 32bit MCA bus,
* but majority of them have 24bit only.
*/
#define MCA_DMA_BOUNCE_THRESHOLD (16 * 1024 * 1024)
/* Updated in mca_busprobe() if appropriate. */
int MCA_system = 0;
//static bus_space_handle_t dmaiot, dmacmdh, dmaexech;
#define MAX_SLAVE_CHANNELS 8
#define MAX_DMA_CHANNELS 16
#define INIT_DMA_CHN_BITMASK() (0xFFFFFFFF << (32 - MAX_DMA_CHANS))
#define INIT_SLAVE_CHN_BITMASK(slaves) (0xFFFFFFFF << (32 - (slaves))
#define DMA_AVAIL(chn, bitmask) ((bitmask) & (1 << (31 - (chn))))
#define DMA_ALLOC(chn, bitmask) ((bitmask) &= ~(1 << (31 - (chn))))
#define DMA_FREE(chn, bitmask) ((bitmask) |= (1 << (31 - (chn))))
/*
* MCA DMA controller commands. The exact sense of individual bits
* are from Tymm Twillman <tymm@computer.org>, who worked on Linux MCA DMA
* support.
*/
#define DMACMD_SET_IO 0x00 /* set port (16bit) for i/o transfer */
#define DMACMD_SET_ADDR 0x20 /* set addr (24bit) for i/o transfer */
#define DMACMD_GET_ADDR 0x30 /* get addr (24bit) for i/o transfer */
#define DMACMD_SET_CNT 0x40 /* set memory size for DMA (16b) */
#define DMACMD_GET_CNT 0x50 /* get count of remaining bytes in DMA*/
#define DMACMD_GET_STATUS 0x60 /* ?? */
#define DMACMD_SET_MODE 0x70 /* set DMA mode */
# define DMACMD_MODE_XFER 0x04 /* do transfer, read by default */
# define DMACMD_MODE_READ 0x08 /* read transfer */
# define DMACMD_MODE_WRITE 0x00 /* write transfer */
# define DMACMD_MODE_IOPORT 0x01 /* DMA from/to IO register */
# define DMACMD_MODE_16BIT 0x40 /* 16bit transfers (default 8bit) */
#define DMACMD_SET_ARBUS 0x80 /* ?? */
#define DMACMD_MASK 0x90 /* command mask */
#define DMACMD_RESET_MASK 0xA0 /* reset */
#define DMACMD_MASTER_CLEAR 0xD0 /* ?? */
const struct evcnt *
mca_intr_evcnt(mca_chipset_tag_t ic, int irq)
{
/* XXX for now, no evcnt parent reported */
return NULL;
}
/*
* Map the MCA DMA controller registers.
*/
void
mca_attach_hook(struct device *parent, struct device *self,
struct mcabus_attach_args *mba)
{
#if 0
dmaiot = mba->mba_iot;
if (bus_space_map(dmaiot, DMA_CMD, 1, 0, &dmacmdh)
|| bus_space_map(dmaiot, DMA_EXEC, 1, 0, &dmaexech))
panic("mca: couldn't map DMA registers");
#endif
}
/*
* Read value of MCA POS register "reg" in slot "slot".
*/
int
mca_conf_read(mca_chipset_tag_t mc, int slot, int reg)
{
int data;
slot &= 15; /* slot must be in range 0-15 */
data = inb(RS6000_BUS_SPACE_IO + MCA_POS_REG(reg) + (slot<<16));
return data;
}
/*
* Write "data" to MCA POS register "reg" in slot "slot".
*/
void
mca_conf_write(mca_chipset_tag_t mc, int slot, int reg, int data)
{
slot &= 15; /* slot must be in range 0-15 */
outb(RS6000_BUS_SPACE_IO + MCA_POS_REG(reg) + (slot<<16), data);
}
void *
mca_intr_establish(mca_chipset_tag_t mc, mca_intr_handle_t ih,
int level, int (*func)(void *), void *arg)
{
if (ih == 0 || ih >= ICU_LEN)
panic("mca_intr_establish: bogus handle 0x%x", ih);
/* MCA interrupts are always level-triggered */
return intr_establish(ih, IST_LEVEL, level, func, arg);
}
void
mca_intr_disestablish(mca_chipset_tag_t mc, void *cookie)
{
intr_disestablish(cookie);
}
/*
* Handle a NMI.
* return true to panic system, false to ignore.
*/
int
mca_nmi(void)
{
/*
* PS/2 MCA devices can generate NMIs - we can find out which
* slot generated it from the POS registers.
*/
int slot, mcanmi=0;
/* if there is no MCA bus, call x86_nmi() */
if (!MCA_system)
goto out;
/* ensure motherboard setup is disabled */
outb(MCA_MB_SETUP_REG, 0xff);
/* find if an MCA slot has the CHCK bit asserted (low) in POS 5 */
for(slot=0; slot<MCA_MAX_SLOTS; slot++) {
outb(MCA_ADAP_SETUP_REG, slot | MCA_ADAP_SET);
if ((inb(MCA_POS_REG(5)) & MCA_POS5_CHCK) == 0) {
mcanmi = 1;
/* find if CHCK status is available in POS 6/7 */
if((inb(MCA_POS_REG(5)) & MCA_POS5_CHCK_STAT) == 0)
log(LOG_CRIT, "MCA NMI: slot %d, POS6=0x%02x, POS7=0x%02x\n",
slot+1, inb(MCA_POS_REG(6)),
inb(MCA_POS_REG(7)));
else
log(LOG_CRIT, "MCA NMI: slot %d\n", slot+1);
}
}
outb(MCA_ADAP_SETUP_REG, 0);
out:
if (!mcanmi) {
/* no CHCK bits asserted, assume ISA NMI */
//return (x86_nmi());
return 0;
} else
return(0);
}
/*
* Realistically, we should probe for the presence of an MCA bus here, and
* return a reasonable value. However, this port is never expected to run
* on anything other than MCA, so rather than write a bunch of complex code
* to find that we indeed have a bus, lets just assume we do.
*/
void
mca_busprobe(void)
{
MCA_system = 1;
}
#define PORT_DISKLED 0x92
#define DISKLED_ON 0x40
/*
* Light disk busy LED on IBM PS/2.
*/
void
mca_disk_busy(void)
{
outb(PORT_DISKLED, inb(PORT_DISKLED) | DISKLED_ON);
}
/*
* Turn off disk LED on IBM PS/2.
*/
void
mca_disk_unbusy(void)
{
outb(PORT_DISKLED, inb(PORT_DISKLED) & ~DISKLED_ON);
}
/*
* -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
* MCA DMA specific stuff. We use ISA routines for bulk of the work,
* since MCA shares much of the charasteristics with it. We just hook
* the DMA channel initialization and kick MCA DMA controller appropriately.
* -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
*/
#ifdef NOTYET
/*
* Synchronize a MCA DMA map.
*/
static void
_mca_bus_dmamap_sync(bus_dma_tag_t t, bus_dmamap_t map, bus_addr_t offset,
bus_size_t len, int ops)
{
struct rs6000_dma_cookie *cookie;
bus_addr_t phys;
bus_size_t cnt;
int dmach, mode;
_bus_dmamap_sync(t, map, offset, len, ops);
/*
* Don't do anything if not using the DMA controller.
*/
if ((map->_dm_flags & _MCABUS_DMA_USEDMACTRL) == 0)
return;
/*
* Don't do anything if not PRE* operation, allow only
* one of PREREAD and PREWRITE.
*/
if (ops != BUS_DMASYNC_PREREAD && ops != BUS_DMASYNC_PREWRITE)
return;
cookie = (struct rs6000_dma_cookie *)map->_dm_cookie;
dmach = (cookie->id_flags & 0xf0) >> 4;
phys = map->dm_segs[0].ds_addr;
cnt = map->dm_segs[0].ds_len;
mode = DMACMD_MODE_XFER;
mode |= (ops == BUS_DMASYNC_PREREAD)
? DMACMD_MODE_READ : DMACMD_MODE_WRITE;
if (map->_dm_flags & MCABUS_DMA_IOPORT)
mode |= DMACMD_MODE_IOPORT;
/* Use 16bit DMA if requested */
if (map->_dm_flags & MCABUS_DMA_16BIT) {
#ifdef DIAGNOSTIC
if ((cnt % 2) != 0) {
panic("_mca_bus_dmamap_sync: 16bit DMA and cnt %lu odd",
cnt);
}
#endif
mode |= DMACMD_MODE_16BIT;
cnt /= 2;
}
/*
* Initialize the MCA DMA controller appropriately. The exact
* sequence to setup the controller is taken from Minix.
*/
/* Disable access to DMA channel. */
bus_space_write_1(dmaiot, dmacmdh, 0, DMACMD_MASK | dmach);
/* Set the transfer mode. */
bus_space_write_1(dmaiot, dmacmdh, 0, DMACMD_SET_MODE | dmach);
bus_space_write_1(dmaiot, dmaexech, 0, mode);
/* Set the address byte pointer. */
bus_space_write_1(dmaiot, dmacmdh, 0, DMACMD_SET_ADDR | dmach);
/* address bits 0..7 */
bus_space_write_1(dmaiot, dmaexech, 0, (phys >> 0) & 0xff);
/* address bits 8..15 */
bus_space_write_1(dmaiot, dmaexech, 0, (phys >> 8) & 0xff);
/* address bits 16..23 */
bus_space_write_1(dmaiot, dmaexech, 0, (phys >> 16) & 0xff);
/* Set the count byte pointer */
bus_space_write_1(dmaiot, dmacmdh, 0, DMACMD_SET_CNT | dmach);
/* count bits 0..7 */
bus_space_write_1(dmaiot, dmaexech, 0, ((cnt - 1) >> 0) & 0xff);
/* count bits 8..15 */
bus_space_write_1(dmaiot, dmaexech, 0, ((cnt - 1) >> 8) & 0xff);
/* Enable access to DMA channel. */
bus_space_write_1(dmaiot, dmacmdh, 0, DMACMD_RESET_MASK | dmach);
}
#endif
/*
* Allocate a DMA map, and set up DMA channel.
*/
int
mca_dmamap_create(bus_dma_tag_t t, bus_size_t size, int flags,
bus_dmamap_t *dmamp, int dmach)
{
#if 0
int error;
struct rs6000_dma_cookie *cookie;
#ifdef DEBUG
/* Sanity check */
if (dmach < 0 || dmach >= MAX_DMA_CHANNELS) {
printf("mcadma_create: invalid DMA channel %d\n",
dmach);
return (EINVAL);
}
if (size > 65536) {
panic("mca_dmamap_create: dmamap sz %ld > 65536",
(long) size);
}
#endif
/*
* MCA DMA transfer can be maximum 65536 bytes long and must
* be in one chunk. No specific boundary constraints are present.
*/
if ((error = _bus_dmamap_create(t, size, 1, 65536, 0, flags, dmamp)))
return (error);
cookie = (struct rs6000_dma_cookie *) (*dmamp)->_dm_cookie;
if (cookie == NULL) {
/*
* Allocate our cookie if not yet done.
*/
cookie = malloc(sizeof(struct rs6000_dma_cookie), M_DMAMAP,
((flags & BUS_DMA_NOWAIT) ? M_NOWAIT : M_WAITOK) | M_ZERO);
if (cookie == NULL) {
return ENOMEM;
}
(*dmamp)->_dm_cookie = cookie;
}
/* Encode DMA channel */
cookie->id_flags &= 0x0f;
cookie->id_flags |= dmach << 4;
/* Mark the dmamap as using DMA controller. Some devices
* drive DMA themselves, and don't need the MCA DMA controller.
* To distinguish the two, use a flag for dmamaps which use the DMA
* controller.
*/
(*dmamp)->_dm_flags |= _MCABUS_DMA_USEDMACTRL;
#endif
return (0);
}
/*
* Set I/O port for DMA. Implemented separately from _mca_bus_dmamap_sync()
* so that it's available for one-shot setup.
*/
void
mca_dma_set_ioport(int dma, uint16_t port)
{
#if 0
/* Disable access to dma channel. */
bus_space_write_1(dmaiot, dmacmdh, 0, DMACMD_MASK | dma);
/* Set I/O port to use for DMA */
bus_space_write_1(dmaiot, dmacmdh, 0, DMACMD_SET_IO | dma);
bus_space_write_1(dmaiot, dmaexech, 0, port & 0xff);
bus_space_write_1(dmaiot, dmaexech, 0, (port >> 8) & 0xff);
/* Enable access to DMA channel. */
bus_space_write_1(dmaiot, dmacmdh, 0, DMACMD_RESET_MASK | dma);
#endif
}