NetBSD-5.0.2/sys/arch/shark/shark/ns87307.c
/* $NetBSD: ns87307.c,v 1.5 2007/02/22 16:50:42 thorpej Exp $ */
/*
* Copyright 1997
* Digital Equipment Corporation. All rights reserved.
*
* This software is furnished under license and may be used and
* copied only in accordance with the following terms and conditions.
* Subject to these conditions, you may download, copy, install,
* use, modify and distribute this software in source and/or binary
* form. No title or ownership is transferred hereby.
*
* 1) Any source code used, modified or distributed must reproduce
* and retain this copyright notice and list of conditions as
* they appear in the source file.
*
* 2) No right is granted to use any trade name, trademark, or logo of
* Digital Equipment Corporation. Neither the "Digital Equipment
* Corporation" name nor any trademark or logo of Digital Equipment
* Corporation may be used to endorse or promote products derived
* from this software without the prior written permission of
* Digital Equipment Corporation.
*
* 3) This software is provided "AS-IS" and any express or implied
* warranties, including but not limited to, any implied warranties
* of merchantability, fitness for a particular purpose, or
* non-infringement are disclaimed. In no event shall DIGITAL be
* liable for any damages whatsoever, and in particular, DIGITAL
* shall not be liable for special, indirect, consequential, or
* incidental damages or damages for lost profits, loss of
* revenue or loss of use, whether such damages arise in contract,
* negligence, tort, under statute, in equity, at law or otherwise,
* even if advised of the possibility of such damage.
*/
/*
**++
**
** FACILITY:
**
** ns87307 SuperIO chip configuration functions.
**
** ABSTRACT:
**
** This file contains routines to configure the National Semiconductor
** PC87307VUL SuperIO chip.
**
** AUTHORS:
**
** John Court, Digital Equipment Corporation.
**
** CREATION DATE:
**
** 16/4/1997
**
**--
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: ns87307.c,v 1.5 2007/02/22 16:50:42 thorpej Exp $");
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <machine/intr.h>
#include <machine/bus.h>
#include <dev/isa/isavar.h>
#include <shark/shark/ns87307reg.h>
/*
**++
** FUNCTION NAME:
**
** i87307KbdConfig
**
** FUNCTIONAL DESCRIPTION:
**
** This function configures the Keyboard controller logical
** device on the ns87307 SuperIO hardware. It sets up the addresses
** of the data and command ports and configures the irq number and
** triggering for the device. It then activates the device.
**
** FORMAL PARAMETERS:
**
** iot
** kbdBase
** irqNum
**
** IMPLICIT INPUTS:
**
** None.
**
** IMPLICIT OUTPUTS:
**
** None.
**
** function value or completion codes
**
** true configuration of the kdb device was successful.
** false configuration of the kdb device failed.
**
** SIDE EFFECTS:
**
** None.
**--
*/
int
i87307KbdConfig(bus_space_tag_t iot,
u_int kbdBase,
u_int irqNum )
{
u_int configured = false;
bus_space_handle_t ioh;
if (!(bus_space_map( iot, CONNSIOADDR, NSIO_NPORTS, 0 , &ioh )))
{
NSIO_SELECT_DEV( iot, ioh, NSIO_DEV_KBC );
NSIO_DEACTIVATE_DEV( iot, ioh );
NSIO_CONFIG_IRQ( iot, ioh, irqNum, NSIO_IRQ_LEVEL | NSIO_IRQ_HIGH );
NSIO_CONFIG_KBCDATA( iot, ioh, kbdBase );
NSIO_CONFIG_KBCCMD(iot, ioh, kbdBase+4);
NSIO_WRITE_REG( iot, ioh, NSIO_KBC_CFG, 0x80 );
NSIO_ACTIVATE_DEV( iot, ioh );
NSIO_CONFIG_KBCDEBUG( iot, ioh );
/* unmap the space so can probe later
*/
bus_space_unmap( iot, ioh, NSIO_NPORTS );
configured = true;
}
return (configured);
} /* End i87307KbdConfig() */
/*
**++
** FUNCTION NAME:
**
** i87307MouseConfig
**
** FUNCTIONAL DESCRIPTION:
**
** This function configures the Mouse logical device on the ns87307
** SuperIO chip. It sets up only the interrupt parameters since the
** mouse shares the device ports with the Keyboard. It also activates
** the device.
**
** FORMAL PARAMETERS:
**
** iot
** irqNum
**
** IMPLICIT INPUTS:
**
** None.
**
** IMPLICIT OUTPUTS:
**
** None.
**
** function value or completion codes
**
** true configuration of the kdb device was successful.
** false configuration of the kdb device failed.
**
** SIDE EFFECTS:
**
** None.
**--
*/
int
i87307MouseConfig(bus_space_tag_t iot,
u_int irqNum )
{
u_int configured;
bus_space_handle_t ioh;
configured = false; /* be a pessimist */
if (!(bus_space_map( iot, CONNSIOADDR, NSIO_NPORTS, 0 , &ioh )))
{
/* Now do the mouse logical device IRQ settup.
*/
NSIO_SELECT_DEV( iot, ioh, NSIO_DEV_MOUSE );
NSIO_DEACTIVATE_DEV( iot, ioh );
NSIO_CONFIG_IRQ( iot, ioh, irqNum, NSIO_IRQ_LEVEL | NSIO_IRQ_HIGH);
NSIO_ACTIVATE_DEV( iot, ioh );
NSIO_CONFIG_DEBUG( iot, ioh );
/* unmap the space so can probe later
*/
bus_space_unmap( iot, ioh, NSIO_NPORTS );
configured = true;
}
return (configured);
} /* End i87307MouseConfig() */
/*
**++
** FUNCTION NAME:
**
** i87307PrinterConfig
**
** FUNCTIONAL DESCRIPTION:
**
** This function configures the Parrel logical device on the ns87307
** SuperIO chip.
** the device.
**
** FORMAL PARAMETERS:
**
** iot
** irqNum
**
** IMPLICIT INPUTS:
**
** None.
**
** IMPLICIT OUTPUTS:
**
** None.
**
** function value or completion codes
**
** true configuration of the kdb device was successful.
** false configuration of the kdb device failed.
**
** SIDE EFFECTS:
**
** None.
**--
*/
int
i87307PrinterConfig(bus_space_tag_t iot,
u_int irqNum )
{
u_int configured = false;
bus_space_handle_t ioh;
u_char value;
if (!(bus_space_map( iot, CONNSIOADDR, NSIO_NPORTS, 0 , &ioh )))
{
/* select the printer */
NSIO_SELECT_DEV( iot, ioh, NSIO_DEV_LPT );
NSIO_DEACTIVATE_DEV( iot, ioh );
value = NSIO_LPT_TRISTATE_DISABLE |
NSIO_LPT_CLOCK_DISABLE |
NSIO_LPT_REPORT_SPP |
NSIO_LPT_REG403_DISABLE |
NSIO_LPT_SPP_EXTENDED;
NSIO_WRITE_REG( iot, ioh, NSIO_CFG_REG0, value);
/* set the type of interrupt */
value = NSIO_IRQ_HIGH |
NSIO_IRQ_LEVEL;
NSIO_CONFIG_IRQ( iot, ioh, irqNum,value);
/* activate the device */
NSIO_ACTIVATE_DEV( iot, ioh );
/* unmap the space so can probe later */
bus_space_unmap( iot, ioh, NSIO_NPORTS );
configured = true;
}
return (configured);
} /* End i87307PrinterConfig() */
/*
**++
** FUNCTION NAME:
**
** nsioConfigPrint
**
** FUNCTIONAL DESCRIPTION:
**
** This function prints out the irq, iobase etc, for the
** currently selected logical device. It is intended to
** be used for debugging only.
**
** FORMAL PARAMETERS:
**
** sc pointer to the nsio's softc structure
**
** IMPLICIT INPUTS:
**
** None.
**
** IMPLICIT OUTPUTS:
**
** None.
**
** function value or completion codes
**
** None
**
** SIDE EFFECTS:
**
** None.
**
**--
*/
//#ifdef DDB
void nsioConfigPrint(bus_space_tag_t nsioIot,
bus_space_handle_t nsioIoh )
{
u_char dev;
u_char activate;
u_char iorange;
u_char iobaseh;
u_char iobasel;
u_char irq;
u_char irqType;
u_char dma1;
u_char dma2;
u_char reg0;
NSIO_READ_REG( nsioIot, nsioIoh, NSIO_CFG_LOGDEV, dev );
NSIO_READ_REG( nsioIot, nsioIoh, NSIO_CFG_ACTIVATE, activate );
NSIO_READ_REG( nsioIot, nsioIoh, NSIO_CFG_IORNGCHK, iorange );
NSIO_READ_REG( nsioIot, nsioIoh, NSIO_CFG_IOBASEH, iobaseh );
NSIO_READ_REG( nsioIot, nsioIoh, NSIO_CFG_IOBASEL, iobasel );
NSIO_READ_REG( nsioIot, nsioIoh, NSIO_CFG_IRQ, irq );
NSIO_READ_REG( nsioIot, nsioIoh, NSIO_CFG_IRQTYPE, irqType );
NSIO_READ_REG( nsioIot, nsioIoh, NSIO_CFG_DMA1, dma1 );
NSIO_READ_REG( nsioIot, nsioIoh, NSIO_CFG_DMA2, dma2 );
NSIO_READ_REG( nsioIot, nsioIoh, NSIO_CFG_REG0, reg0 );
printf("nsio config for logical device %d\n", dev );
printf("activate: %x\n",activate);
printf("iorange: %x\n",iorange);
printf("iobase: %x\n",(iobaseh << 8) | iobasel);
printf("irq: %x\n",irq);
printf("irqtype: %x\n",irqType);
printf("dma1: %x\n",dma1);
printf("dma2: %x\n",dma2) ;
printf("reg0: %x\n",reg0);
}
//#endif