NetBSD-5.0.2/sys/arch/sparc64/sparc64/sigcode32.s

Compare this file to the similar file:
Show the results in this format:
/*	$NetBSD: sigcode32.s,v 1.1 2001/06/06 21:19:50 mrg Exp $	*/

/*
 * Copyright (c) 1996-2000 Eduardo Horvath
 * Copyright (c) 1996 Paul Kranenburg
 * Copyright (c) 1996
 * 	The President and Fellows of Harvard College.
 *	All rights reserved.
 * Copyright (c) 1992, 1993
 *	The Regents of the University of California.
 *	All rights reserved.
 *
 * This software was developed by the Computer Systems Engineering group
 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
 * contributed to Berkeley.
 *
 * All advertising materials mentioning features or use of this software
 * must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Lawrence Berkeley Laboratory.
 *	This product includes software developed by Harvard University.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 *	This product includes software developed by Harvard University.
 *	This product includes software developed by Paul Kranenburg.
 * 4. Neither the name of the University nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS''
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
 * DAMAGE.
 *
 *	@(#)locore.s	8.4 (Berkeley) 12/10/93
 * from: NetBSD: locore.s,v 1.116 2001/05/30 15:24:37 lukem Exp
 */

/*
 * This module designed to be #include'ed by another assembly language
 * source file, such as locore.s, which must provide these #defines:
 *	SIGCODE_NAME
 *	ESIGCODE_NAME
 *	SIGRETURN_NAME
 *	EXIT_NAME
 * for the sigcode, esigcode, sigreturn & exit symbol names.
 */

/*
 * The following code is copied to the top of the user stack when each
 * process is exec'ed, and signals are `trampolined' off it.
 *
 * When this code is run, the stack looks like:
 *	[%sp]		64 bytes to which registers can be dumped
 *	[%sp + 64]	signal number (goes in %o0)
 *	[%sp + 64 + 4]	signal code (goes in %o1)
 *	[%sp + 64 + 8]	placeholder
 *	[%sp + 64 + 12]	argument for %o3, currently unsupported (always 0)
 *	[%sp + 64 + 16]	first word of saved state (sigcontext)
 *	    .
 *	    .
 *	    .
 *	[%sp + NNN]	last word of saved state
 * (followed by previous stack contents or top of signal stack).
 * The address of the function to call is in %g1; the old %g1 and %o0
 * have already been saved in the sigcontext.  We are running in a clean
 * window, all previous windows now being saved to the stack.
 *
 * Note that [%sp + 64 + 8] == %sp + 64 + 16.  The copy at %sp+64+8
 * will eventually be removed, with a hole left in its place, if things
 * work out.
 */
	.globl	SIGCODE_NAME
	.globl	ESIGCODE_NAME
SIGCODE_NAME:
	/*
	 * XXX  the `save' and `restore' below are unnecessary: should
	 *	replace with simple arithmetic on %sp
	 *
	 * Make room on the stack for 32 %f registers + %fsr.  This comes
	 * out to 33*4 or 132 bytes, but this must be aligned to a multiple
	 * of 8, or 136 bytes.
	 */
	save	%sp, -CCFSZ - 136, %sp
	mov	%g2, %l2		! save globals in %l registers
	mov	%g3, %l3
	mov	%g4, %l4
	mov	%g5, %l5
	mov	%g6, %l6
	mov	%g7, %l7
	/*
	 * Saving the fpu registers is expensive, so do it iff it is
	 * enabled and dirty.  We only deal w/lower 32 regs
	 */
	rd	%fprs, %l0
	btst	FPRS_DL, %l0		! test dl
	bz,pt	%icc, 1f
	 rd	%y, %l1			! in any case, save %y

	! fpu is enabled, oh well
	st	%fsr, [%sp + CCFSZ + 0]
	std	%f0, [%sp + CCFSZ + 8]
	std	%f2, [%sp + CCFSZ + 16]
	std	%f4, [%sp + CCFSZ + 24]
	std	%f6, [%sp + CCFSZ + 32]
	std	%f8, [%sp + CCFSZ + 40]
	std	%f10, [%sp + CCFSZ + 48]
	std	%f12, [%sp + CCFSZ + 56]
	std	%f14, [%sp + CCFSZ + 64]
	std	%f16, [%sp + CCFSZ + 72]
	std	%f18, [%sp + CCFSZ + 80]
	std	%f20, [%sp + CCFSZ + 88]
	std	%f22, [%sp + CCFSZ + 96]
	std	%f24, [%sp + CCFSZ + 104]
	std	%f26, [%sp + CCFSZ + 112]
	std	%f28, [%sp + CCFSZ + 120]
	std	%f30, [%sp + CCFSZ + 128]
1:
	ldd	[%fp + 64], %o0		! sig, code
	ld	[%fp + 76], %o3		! arg3
	call	%g1			! (*sa->sa_handler)(sig,code,scp,arg3)
	 add	%fp, 64 + 16, %o2	! scp

	/*
	 * Now that the handler has returned, re-establish all the state
	 * we just saved above, then do a sigreturn.
	 */
	btst	FPRS_DL, %l0		! test dl
	bz,pt	%icc, 1f
	 wr	%l1, %g0, %y		! in any case, restore %y

	ld	[%sp + CCFSZ + 0], %fsr
	ldd	[%sp + CCFSZ + 8], %f0
	ldd	[%sp + CCFSZ + 16], %f2
	ldd	[%sp + CCFSZ + 24], %f4
	ldd	[%sp + CCFSZ + 32], %f6
	ldd	[%sp + CCFSZ + 40], %f8
	ldd	[%sp + CCFSZ + 48], %f10
	ldd	[%sp + CCFSZ + 56], %f12
	ldd	[%sp + CCFSZ + 64], %f14
	ldd	[%sp + CCFSZ + 72], %f16
	ldd	[%sp + CCFSZ + 80], %f18
	ldd	[%sp + CCFSZ + 88], %f20
	ldd	[%sp + CCFSZ + 96], %f22
	ldd	[%sp + CCFSZ + 104], %f24
	ldd	[%sp + CCFSZ + 112], %f26
	ldd	[%sp + CCFSZ + 120], %f28
	ldd	[%sp + CCFSZ + 128], %f30

1:
	mov	%l2, %g2
	mov	%l3, %g3
	mov	%l4, %g4
	mov	%l5, %g5
	mov	%l6, %g6
	mov	%l7, %g7

	restore	%g0, SIGRETURN_NAME, %g1 ! get registers back & set syscall #
	add	%sp, 64 + 16, %o0	! compute scp
	t	ST_SYSCALL		! sigreturn(scp)
	mov	EXIT_NAME, %g1		! exit(errno)
	t	ST_SYSCALL
ESIGCODE_NAME: