/* $NetBSD: x68k_init.c,v 1.10 2005/12/24 22:45:40 perry Exp $ */ /* * Copyright (c) 1996 Masaru Oki. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Masaru Oki. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include <sys/cdefs.h> __KERNEL_RCSID(0, "$NetBSD: x68k_init.c,v 1.10 2005/12/24 22:45:40 perry Exp $"); #include <sys/param.h> #include <sys/device.h> #include <machine/bus.h> #include <arch/x68k/dev/intiovar.h> #include <arch/x68k/dev/mfp.h> #include <x68k/x68k/iodevice.h> #define zsdev IODEVbase->io_inscc volatile struct IODEVICE *IODEVbase = (volatile struct IODEVICE *) PHYS_IODEV; void intr_reset(void); extern int iera; extern int ierb; /* * disable all interrupt. */ void intr_reset(void) { /* I/O Controller */ ioctlr.intr = 0; /* Internal RS-232C port */ zsdev.zs_chan_a.zc_csr = 1; __asm("nop"); zsdev.zs_chan_a.zc_csr = 0; __asm("nop"); /* mouse */ zsdev.zs_chan_b.zc_csr = 1; __asm("nop"); zsdev.zs_chan_b.zc_csr = 0; __asm("nop"); mfp_send_usart(0x41); /* MFP (hard coded interrupt vector XXX) */ mfp_set_vr(0x40); mfp_set_iera(0); mfp_set_ierb(0); }