NetBSD-5.0.2/sys/dev/i2o/dpti.c
/* $NetBSD: dpti.c,v 1.40 2008/09/08 23:36:54 gmcgarry Exp $ */
/*-
* Copyright (c) 2001, 2007 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Andrew Doran.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1996-2000 Distributed Processing Technology Corporation
* Copyright (c) 2000 Adaptec Corporation
* All rights reserved.
*
* TERMS AND CONDITIONS OF USE
*
* Redistribution and use in source form, with or without modification, are
* permitted provided that redistributions of source code must retain the
* above copyright notice, this list of conditions and the following disclaimer.
*
* This software is provided `as is' by Adaptec and any express or implied
* warranties, including, but not limited to, the implied warranties of
* merchantability and fitness for a particular purpose, are disclaimed. In no
* event shall Adaptec be liable for any direct, indirect, incidental, special,
* exemplary or consequential damages (including, but not limited to,
* procurement of substitute goods or services; loss of use, data, or profits;
* or business interruptions) however caused and on any theory of liability,
* whether in contract, strict liability, or tort (including negligence or
* otherwise) arising in any way out of the use of this driver software, even
* if advised of the possibility of such damage.
*/
/*
* Adaptec/DPT I2O control interface.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: dpti.c,v 1.40 2008/09/08 23:36:54 gmcgarry Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/queue.h>
#include <sys/proc.h>
#include <sys/endian.h>
#include <sys/malloc.h>
#include <sys/conf.h>
#include <sys/ioctl.h>
#include <sys/kauth.h>
#include <uvm/uvm_extern.h>
#include <sys/bus.h>
#ifdef __i386__
#include <machine/pio.h>
#include <machine/cputypes.h>
#endif
#include <dev/i2o/i2o.h>
#include <dev/i2o/i2odpt.h>
#include <dev/i2o/iopio.h>
#include <dev/i2o/iopvar.h>
#include <dev/i2o/dptivar.h>
#ifdef I2ODEBUG
#define DPRINTF(x) printf x
#else
#define DPRINTF(x)
#endif
static struct dpt_sig dpti_sig = {
{ 'd', 'P', 't', 'S', 'i', 'G'},
SIG_VERSION,
#if defined(__i386__)
PROC_INTEL,
#elif defined(__powerpc__)
PROC_POWERPC,
#elif defined(__alpha__)
PROC_ALPHA,
#elif defined(__mips__)
PROC_MIPS,
#elif defined(__sparc64__)
PROC_ULTRASPARC,
#endif
#if defined(__i386__)
PROC_386 | PROC_486 | PROC_PENTIUM | PROC_SEXIUM,
#else
0,
#endif
FT_HBADRVR,
0,
OEM_DPT,
OS_FREE_BSD, /* XXX */
CAP_ABOVE16MB,
DEV_ALL,
ADF_ALL_SC5,
0,
0,
DPTI_VERSION,
DPTI_REVISION,
DPTI_SUBREVISION,
DPTI_MONTH,
DPTI_DAY,
DPTI_YEAR,
"" /* Will be filled later */
};
void dpti_attach(struct device *, struct device *, void *);
int dpti_blinkled(struct dpti_softc *);
int dpti_ctlrinfo(struct dpti_softc *, int, void *);
int dpti_match(struct device *, struct cfdata *, void *);
int dpti_passthrough(struct dpti_softc *, void *, struct proc *);
int dpti_sysinfo(struct dpti_softc *, int, void *);
dev_type_open(dptiopen);
dev_type_ioctl(dptiioctl);
const struct cdevsw dpti_cdevsw = {
dptiopen, nullclose, noread, nowrite, dptiioctl,
nostop, notty, nopoll, nommap, nokqfilter, D_OTHER,
};
extern struct cfdriver dpti_cd;
CFATTACH_DECL(dpti, sizeof(struct dpti_softc),
dpti_match, dpti_attach, NULL, NULL);
int
dpti_match(struct device *parent, struct cfdata *match, void *aux)
{
struct iop_attach_args *ia;
struct iop_softc *iop;
ia = aux;
iop = (struct iop_softc *)parent;
if (ia->ia_class != I2O_CLASS_ANY || ia->ia_tid != I2O_TID_IOP)
return (0);
if (le16toh(iop->sc_status.orgid) != I2O_ORG_DPT)
return (0);
return (1);
}
void
dpti_attach(struct device *parent, struct device *self, void *aux)
{
struct iop_softc *iop;
struct dpti_softc *sc;
struct {
struct i2o_param_op_results pr;
struct i2o_param_read_results prr;
struct i2o_dpt_param_exec_iop_buffers dib;
} __packed param;
int rv;
sc = device_private(self);
iop = device_private(parent);
/*
* Tell the world what we are. The description in the signature
* must be no more than 46 bytes long (see dptivar.h).
*/
printf(": DPT/Adaptec RAID management interface\n");
snprintf(dpti_sig.dsDescription, sizeof(dpti_sig.dsDescription),
"NetBSD %s I2O OSM", osrelease);
rv = iop_field_get_all(iop, I2O_TID_IOP,
I2O_DPT_PARAM_EXEC_IOP_BUFFERS, ¶m,
sizeof(param), NULL);
if (rv != 0)
return;
sc->sc_blinkled = le32toh(param.dib.serialoutputoff) + 8;
}
int
dptiopen(dev_t dev, int flag, int mode,
struct lwp *l)
{
if (device_lookup(&dpti_cd, minor(dev)) == NULL)
return (ENXIO);
return (0);
}
int
dptiioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l)
{
struct iop_softc *iop;
struct dpti_softc *sc;
struct ioctl_pt *pt;
int i, size, rv, linux;
sc = device_lookup_private(&dpti_cd, minor(dev));
iop = (struct iop_softc *)device_parent(&sc->sc_dv);
rv = 0;
if (cmd == PTIOCLINUX) {
pt = (struct ioctl_pt *)data;
size = IOCPARM_LEN(pt->com);
cmd = pt->com & 0xffff;
data = pt->data;
linux = 1;
} else {
size = IOCPARM_LEN(cmd);
cmd = cmd & 0xffff;
linux = 0;
}
switch (cmd) {
case DPT_SIGNATURE:
if (size > sizeof(dpti_sig))
size = sizeof(dpti_sig);
memcpy(data, &dpti_sig, size);
break;
case DPT_CTRLINFO:
rv = dpti_ctlrinfo(sc, size, data);
break;
case DPT_SYSINFO:
rv = dpti_sysinfo(sc, size, data);
break;
case DPT_BLINKLED:
if ((i = dpti_blinkled(sc)) == -1)
i = 0;
if (size == 0) {
rv = copyout(&i, *(void **)data, sizeof(i));
break;
}
*(int *)data = i;
break;
case DPT_TARGET_BUSY:
/*
* XXX This is here to stop linux_machdepioctl() from
* whining about an unknown ioctl.
*/
rv = EIO;
break;
case DPT_I2OUSRCMD:
rv = kauth_authorize_device_passthru(l->l_cred, dev,
KAUTH_REQ_DEVICE_RAWIO_PASSTHRU_ALL, data);
if (rv)
break;
if (sc->sc_nactive++ >= 2)
tsleep(&sc->sc_nactive, PRIBIO, "dptislp", 0);
if (linux)
rv = dpti_passthrough(sc, data, l->l_proc);
else
rv = dpti_passthrough(sc, *(void **)data, l->l_proc);
sc->sc_nactive--;
wakeup_one(&sc->sc_nactive);
break;
case DPT_I2ORESETCMD:
printf("%s: I2ORESETCMD not implemented\n",
device_xname(&sc->sc_dv));
rv = EOPNOTSUPP;
break;
case DPT_I2ORESCANCMD:
mutex_enter(&iop->sc_conflock);
rv = iop_reconfigure(iop, 0);
mutex_exit(&iop->sc_conflock);
break;
default:
rv = ENOTTY;
break;
}
return (rv);
}
int
dpti_blinkled(struct dpti_softc *sc)
{
struct iop_softc *iop;
u_int v;
iop = (struct iop_softc *)device_parent(&sc->sc_dv);
v = bus_space_read_1(iop->sc_iot, iop->sc_ioh, sc->sc_blinkled + 0);
if (v == 0xbc) {
v = bus_space_read_1(iop->sc_iot, iop->sc_ioh,
sc->sc_blinkled + 1);
return (v);
}
return (-1);
}
int
dpti_ctlrinfo(struct dpti_softc *sc, int size, void *data)
{
struct dpt_ctlrinfo info;
struct iop_softc *iop;
int rv, i;
iop = (struct iop_softc *)device_parent(&sc->sc_dv);
memset(&info, 0, sizeof(info));
info.length = sizeof(info) - sizeof(u_int16_t);
info.drvrHBAnum = device_unit(&sc->sc_dv);
info.baseAddr = iop->sc_memaddr;
if ((i = dpti_blinkled(sc)) == -1)
i = 0;
info.blinkState = i;
info.pciBusNum = iop->sc_pcibus;
info.pciDeviceNum = iop->sc_pcidev;
info.hbaFlags = FLG_OSD_PCI_VALID | FLG_OSD_DMA | FLG_OSD_I2O;
info.Interrupt = 10; /* XXX */
if (size > sizeof(char)) {
memcpy(data, &info, min(sizeof(info), size));
rv = 0;
} else
rv = copyout(&info, *(void **)data, sizeof(info));
return (rv);
}
int
dpti_sysinfo(struct dpti_softc *sc, int size, void *data)
{
struct dpt_sysinfo info;
int rv;
#ifdef __i386__
int i, j;
#endif
memset(&info, 0, sizeof(info));
#ifdef __i386__
outb (0x70, 0x12);
i = inb(0x71);
j = i >> 4;
if (i == 0x0f) {
outb (0x70, 0x19);
j = inb (0x71);
}
info.drive0CMOS = j;
j = i & 0x0f;
if (i == 0x0f) {
outb (0x70, 0x1a);
j = inb (0x71);
}
info.drive1CMOS = j;
info.processorFamily = dpti_sig.dsProcessorFamily;
/*
* Get the conventional memory size from CMOS.
*/
outb(0x70, 0x16);
j = inb(0x71);
j <<= 8;
outb(0x70, 0x15);
j |= inb(0x71);
info.conventionalMemSize = j;
/*
* Get the extended memory size from CMOS.
*/
outb(0x70, 0x31);
j = inb(0x71);
j <<= 8;
outb(0x70, 0x30);
j |= inb(0x71);
info.extendedMemSize = j;
switch (cpu_class) {
case CPUCLASS_386:
info.processorType = PROC_386;
break;
case CPUCLASS_486:
info.processorType = PROC_486;
break;
case CPUCLASS_586:
info.processorType = PROC_PENTIUM;
break;
case CPUCLASS_686:
default:
info.processorType = PROC_SEXIUM;
break;
}
info.flags = SI_CMOS_Valid | SI_BusTypeValid |
SI_MemorySizeValid | SI_NO_SmartROM;
#else
info.flags = SI_BusTypeValid | SI_NO_SmartROM;
#endif
info.busType = SI_PCI_BUS;
/*
* Copy out the info structure to the user.
*/
if (size > sizeof(char)) {
memcpy(data, &info, min(sizeof(info), size));
rv = 0;
} else
rv = copyout(&info, *(void **)data, sizeof(info));
return (rv);
}
int
dpti_passthrough(struct dpti_softc *sc, void *data, struct proc *proc)
{
struct iop_softc *iop;
struct i2o_msg mh, *mf;
struct i2o_reply rh;
struct iop_msg *im;
struct dpti_ptbuf bufs[IOP_MAX_MSG_XFERS];
u_int32_t mbtmp[IOP_MAX_MSG_SIZE / sizeof(u_int32_t)];
u_int32_t rbtmp[IOP_MAX_MSG_SIZE / sizeof(u_int32_t)];
int rv, msgsize, repsize, sgoff, i, mapped, nbuf, nfrag, j, sz;
u_int32_t *p, *pmax;
iop = (struct iop_softc *)device_parent(&sc->sc_dv);
im = NULL;
if ((rv = dpti_blinkled(sc)) != -1) {
if (rv != 0) {
aprint_error_dev(&sc->sc_dv, "adapter blinkled = 0x%02x\n", rv);
return (EIO);
}
}
/*
* Copy in the message frame header and determine the size of the
* full message frame.
*/
if ((rv = copyin(data, &mh, sizeof(mh))) != 0) {
DPRINTF(("%s: message copyin failed\n",
device_xname(&sc->sc_dv)));
return (rv);
}
msgsize = (mh.msgflags >> 14) & ~3;
if (msgsize < sizeof(mh) || msgsize >= IOP_MAX_MSG_SIZE) {
DPRINTF(("%s: bad message frame size\n",
device_xname(&sc->sc_dv)));
return (EINVAL);
}
/*
* Handle special commands.
*/
switch (mh.msgfunc >> 24) {
case I2O_EXEC_IOP_RESET:
printf("%s: I2O_EXEC_IOP_RESET not implemented\n",
device_xname(&sc->sc_dv));
return (EOPNOTSUPP);
case I2O_EXEC_OUTBOUND_INIT:
printf("%s: I2O_EXEC_OUTBOUND_INIT not implemented\n",
device_xname(&sc->sc_dv));
return (EOPNOTSUPP);
case I2O_EXEC_SYS_TAB_SET:
printf("%s: I2O_EXEC_SYS_TAB_SET not implemented\n",
device_xname(&sc->sc_dv));
return (EOPNOTSUPP);
case I2O_EXEC_STATUS_GET:
if ((rv = iop_status_get(iop, 0)) == 0)
rv = copyout(&iop->sc_status, (char *)data + msgsize,
sizeof(iop->sc_status));
return (rv);
}
/*
* Copy in the full message frame.
*/
if ((rv = copyin(data, mbtmp, msgsize)) != 0) {
DPRINTF(("%s: full message copyin failed\n",
device_xname(&sc->sc_dv)));
return (rv);
}
/*
* Determine the size of the reply frame, and copy it in.
*/
if ((rv = copyin((char *)data + msgsize, &rh, sizeof(rh))) != 0) {
DPRINTF(("%s: reply copyin failed\n",
device_xname(&sc->sc_dv)));
return (rv);
}
repsize = (rh.msgflags >> 14) & ~3;
if (repsize < sizeof(rh) || repsize >= IOP_MAX_MSG_SIZE) {
DPRINTF(("%s: bad reply header size\n",
device_xname(&sc->sc_dv)));
return (EINVAL);
}
if ((rv = copyin((char *)data + msgsize, rbtmp, repsize)) != 0) {
DPRINTF(("%s: reply too large\n", device_xname(&sc->sc_dv)));
return (rv);
}
/*
* If the message has a scatter gather list, it must be comprised of
* simple elements. If any one transfer contains multiple segments,
* we allocate a temporary buffer for it; otherwise, the buffer will
* be mapped directly.
*/
mapped = 0;
if ((sgoff = ((mh.msgflags >> 4) & 15)) != 0) {
if ((sgoff + 2) > (msgsize >> 2)) {
DPRINTF(("%s: invalid message size fields\n",
device_xname(&sc->sc_dv)));
return (EINVAL);
}
memset(bufs, 0, sizeof(bufs));
p = mbtmp + sgoff;
pmax = mbtmp + (msgsize >> 2) - 2;
for (nbuf = 0; nbuf < IOP_MAX_MSG_XFERS; nbuf++, p += 2) {
if (p > pmax) {
DPRINTF(("%s: invalid SGL (1)\n",
device_xname(&sc->sc_dv)));
goto bad;
}
if ((p[0] & 0x30000000) != I2O_SGL_SIMPLE) {
DPRINTF(("%s: invalid SGL (2)\n",
device_xname(&sc->sc_dv)));
goto bad;
}
bufs[nbuf].db_out = (p[0] & I2O_SGL_DATA_OUT) != 0;
bufs[nbuf].db_ptr = NULL;
if ((p[0] & I2O_SGL_END_BUFFER) != 0) {
if ((p[0] & 0x00ffffff) > IOP_MAX_XFER) {
DPRINTF(("%s: buffer too large\n",
device_xname(&sc->sc_dv)));
goto bad;
}
bufs[nbuf].db_ptr = (void *)p[1];
bufs[nbuf].db_proc = proc;
bufs[nbuf].db_size = p[0] & 0x00ffffff;
if ((p[0] & I2O_SGL_END) != 0)
break;
continue;
}
/*
* The buffer has multiple segments. Determine the
* total size.
*/
nfrag = 0;
sz = 0;
for (; p <= pmax; p += 2) {
if (nfrag == DPTI_MAX_SEGS) {
DPRINTF(("%s: too many segments\n",
device_xname(&sc->sc_dv)));
goto bad;
}
bufs[nbuf].db_frags[nfrag].iov_len =
p[0] & 0x00ffffff;
bufs[nbuf].db_frags[nfrag].iov_base =
(void *)p[1];
sz += p[0] & 0x00ffffff;
nfrag++;
if ((p[0] & I2O_SGL_END) != 0) {
if ((p[0] & I2O_SGL_END_BUFFER) == 0) {
DPRINTF((
"%s: invalid SGL (3)\n",
device_xname(&sc->sc_dv)));
goto bad;
}
break;
}
if ((p[0] & I2O_SGL_END_BUFFER) != 0)
break;
}
bufs[nbuf].db_nfrag = nfrag;
if (p > pmax) {
DPRINTF(("%s: invalid SGL (4)\n",
device_xname(&sc->sc_dv)));
goto bad;
}
if (sz > IOP_MAX_XFER) {
DPRINTF(("%s: buffer too large\n",
device_xname(&sc->sc_dv)));
goto bad;
}
bufs[nbuf].db_size = sz;
bufs[nbuf].db_ptr = malloc(sz, M_DEVBUF, M_WAITOK);
if (bufs[nbuf].db_ptr == NULL) {
DPRINTF(("%s: allocation failure\n",
device_xname(&sc->sc_dv)));
rv = ENOMEM;
goto bad;
}
for (i = 0, sz = 0; i < bufs[nbuf].db_nfrag; i++) {
rv = copyin(bufs[nbuf].db_frags[i].iov_base,
(char *)bufs[nbuf].db_ptr + sz,
bufs[nbuf].db_frags[i].iov_len);
if (rv != 0) {
DPRINTF(("%s: frag copyin\n",
device_xname(&sc->sc_dv)));
goto bad;
}
sz += bufs[nbuf].db_frags[i].iov_len;
}
if ((p[0] & I2O_SGL_END) != 0)
break;
}
if (nbuf == IOP_MAX_MSG_XFERS) {
DPRINTF(("%s: too many transfers\n",
device_xname(&sc->sc_dv)));
goto bad;
}
} else
nbuf = -1;
/*
* Allocate a wrapper, and adjust the message header fields to
* indicate that no scatter-gather list is currently present.
*/
im = iop_msg_alloc(iop, IM_WAIT | IM_NOSTATUS);
im->im_rb = (struct i2o_reply *)rbtmp;
mf = (struct i2o_msg *)mbtmp;
mf->msgictx = IOP_ICTX;
mf->msgtctx = im->im_tctx;
if (sgoff != 0)
mf->msgflags = (mf->msgflags & 0xff0f) | (sgoff << 16);
/*
* Map the data transfer(s).
*/
for (i = 0; i <= nbuf; i++) {
rv = iop_msg_map(iop, im, mbtmp, bufs[i].db_ptr,
bufs[i].db_size, bufs[i].db_out, bufs[i].db_proc);
if (rv != 0) {
DPRINTF(("%s: msg_map failed, rv = %d\n",
device_xname(&sc->sc_dv), rv));
goto bad;
}
mapped = 1;
}
/*
* Start the command and sleep until it completes.
*/
if ((rv = iop_msg_post(iop, im, mbtmp, 5*60*1000)) != 0)
goto bad;
/*
* Copy out the reply frame.
*/
if ((rv = copyout(rbtmp, (char *)data + msgsize, repsize)) != 0) {
DPRINTF(("%s: reply copyout() failed\n",
device_xname(&sc->sc_dv)));
}
bad:
/*
* Free resources and return to the caller.
*/
if (im != NULL) {
if (mapped)
iop_msg_unmap(iop, im);
iop_msg_free(iop, im);
}
for (i = 0; i <= nbuf; i++) {
if (bufs[i].db_proc != NULL)
continue;
if (!bufs[i].db_out && rv == 0) {
for (j = 0, sz = 0; j < bufs[i].db_nfrag; j++) {
rv = copyout((char *)bufs[i].db_ptr + sz,
bufs[i].db_frags[j].iov_base,
bufs[i].db_frags[j].iov_len);
if (rv != 0)
break;
sz += bufs[i].db_frags[j].iov_len;
}
}
if (bufs[i].db_ptr != NULL)
free(bufs[i].db_ptr, M_DEVBUF);
}
return (rv);
}