NetBSD-5.0.2/sys/dev/ic/lptvar.h

Compare this file to the similar file:
Show the results in this format:

/*	$NetBSD: lptvar.h,v 1.56 2008/03/07 17:15:51 cube Exp $	*/

/*
 * Copyright (c) 1993, 1994 Charles M. Hannum.
 * Copyright (c) 1990 William F. Jolitz, TeleMuse
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This software is a component of "386BSD" developed by
 *	William F. Jolitz, TeleMuse.
 * 4. Neither the name of the developer nor the name "386BSD"
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ
 * AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS
 * SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT.
 * THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT
 * NOT MAKE USE OF THIS WORK.
 *
 * FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED
 * BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN
 * REFERENCES SUCH AS THE  "PORTING UNIX TO THE 386" SERIES
 * (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING
 * JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND
 * LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE
 * ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS
 * OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992.
 *
 * THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE DEVELOPER BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/*
 * Device Driver for AT style parallel printer port
 */

#ifndef _LPT_VAR_H_
#define _LPT_VAR_H_

#include <sys/callout.h>

struct lpt_softc {
	device_t sc_dev;
	void *sc_ih;
	callout_t sc_wakeup_ch;
	size_t sc_count;
	void *sc_sih;
	void *sc_inbuf;
	u_char *sc_cp;
	int sc_spinmax;
	bus_space_tag_t sc_iot;
	bus_space_handle_t sc_ioh;
	u_char sc_dev_ok;	/* device attached correctly */
	u_char sc_state;
#define	LPT_OPEN	0x01	/* device is open */
#define	LPT_OBUSY	0x02	/* printer is busy doing output */
#define	LPT_INIT	0x04	/* waiting to initialize for open */
	u_char sc_flags;
#define	LPT_AUTOLF	0x20	/* automatic LF on CR */
#define	LPT_NOPRIME	0x40	/* don't prime on open */
#define	LPT_NOINTR	0x80	/* do not use interrupt */
	u_char sc_control;
	u_char sc_laststatus;
};

#define LPS_INVERT      (LPS_SELECT|LPS_NERR|LPS_NBSY|LPS_NACK)
#define LPS_MASK        (LPS_SELECT|LPS_NERR|LPS_NBSY|LPS_NACK|LPS_NOPAPER)
#define NOT_READY()     ((bus_space_read_1(iot, ioh, lpt_status) ^ LPS_INVERT) & LPS_MASK)
#define NOT_READY_ERR() lptnotready(bus_space_read_1(iot, ioh, lpt_status), sc)

int lptnotready(u_char, struct lpt_softc *);
void lptwakeup(void *arg);
int lptpushbytes(struct lpt_softc *);

void lpt_attach_subr(struct lpt_softc *);
int lpt_detach_subr(device_t, int);
int lptintr(void *);

#endif /* _LPT_VAR_H_ */