NetBSD-5.0.2/sys/dev/isa/if_ep_isa.c
/* $NetBSD: if_ep_isa.c,v 1.43 2008/08/27 05:33:47 christos Exp $ */
/*-
* Copyright (c) 1996, 1997 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1997 Jonathan Stone <jonathan@NetBSD.org>
* Copyright (c) 1994 Herb Peyerl <hpeyerl@beer.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Herb Peyerl.
* 4. The name of Herb Peyerl may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_ep_isa.c,v 1.43 2008/08/27 05:33:47 christos Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/syslog.h>
#include <sys/select.h>
#include <sys/device.h>
#include <sys/queue.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#include <sys/cpu.h>
#include <sys/bus.h>
#include <sys/intr.h>
#include <dev/mii/miivar.h>
#include <dev/ic/elink3var.h>
#include <dev/ic/elink3reg.h>
#include <dev/isa/isavar.h>
#include <dev/isa/elink.h>
int ep_isa_probe(device_t , cfdata_t , void *);
void ep_isa_attach(device_t , device_t , void *);
CFATTACH_DECL_NEW(ep_isa, sizeof(struct ep_softc),
ep_isa_probe, ep_isa_attach, NULL, NULL);
static void epaddcard(int, int, int, int);
/*
* This keeps track of which ISAs have been through an ep probe sequence.
* A simple static variable isn't enough, since it's conceivable that
* a system might have more than one ISA bus.
*
* The "er_bus" member is the unit number of the parent ISA bus, e.g. "0"
* for "isa0".
*/
struct ep_isa_done_probe {
LIST_ENTRY(ep_isa_done_probe) er_link;
int er_bus;
};
static LIST_HEAD(, ep_isa_done_probe) ep_isa_all_probes;
static int ep_isa_probes_initialized;
#define MAXEPCARDS 20 /* if you have more than 20, you lose */
static struct epcard {
int bus;
int iobase;
int irq;
char available;
long model;
} epcards[MAXEPCARDS];
static int nepcards;
static void
epaddcard(bus, iobase, irq, model)
int bus, iobase, irq, model;
{
if (nepcards >= MAXEPCARDS)
return;
epcards[nepcards].bus = bus;
epcards[nepcards].iobase = iobase;
epcards[nepcards].irq = (irq == 2) ? 9 : irq;
epcards[nepcards].model = model;
epcards[nepcards].available = 1;
nepcards++;
}
/*
* 3c509 cards on the ISA bus are probed in ethernet address order.
* The probe sequence requires careful orchestration, and we'd like
* like to allow the irq and base address to be wildcarded. So, we
* probe all the cards the first time epprobe() is called. On subsequent
* calls we look for matching cards.
*/
int
ep_isa_probe(device_t parent, cfdata_t match, void *aux)
{
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
int slot, iobase, irq, i;
u_int16_t vendor, model, eeprom_addr_cfg;
struct ep_isa_done_probe *er;
int bus = device_unit(parent);
if (ISA_DIRECT_CONFIG(ia))
return (0);
if (ep_isa_probes_initialized == 0) {
LIST_INIT(&ep_isa_all_probes);
ep_isa_probes_initialized = 1;
}
/*
* Probe this bus if we haven't done so already.
*/
for (er = ep_isa_all_probes.lh_first; er != NULL;
er = er->er_link.le_next)
if (er->er_bus == device_unit(parent))
goto bus_probed;
/*
* Mark this bus so we don't probe it again.
*/
er = (struct ep_isa_done_probe *)
malloc(sizeof(struct ep_isa_done_probe), M_DEVBUF, M_NOWAIT);
if (er == NULL)
panic("ep_isa_probe: can't allocate state storage");
er->er_bus = bus;
LIST_INSERT_HEAD(&ep_isa_all_probes, er, er_link);
/*
* Map the Etherlink ID port for the probe sequence.
*/
if (bus_space_map(iot, ELINK_ID_PORT, 1, 0, &ioh)) {
printf("ep_isa_probe: can't map Etherlink ID port\n");
return 0;
}
for (slot = 0; slot < MAXEPCARDS; slot++) {
elink_reset(iot, ioh, device_unit(parent));
elink_idseq(iot, ioh, ELINK_509_POLY);
/* Untag all the adapters so they will talk to us. */
if (slot == 0)
bus_space_write_1(iot, ioh, 0, TAG_ADAPTER + 0);
vendor = bswap16(epreadeeprom(iot, ioh, EEPROM_MFG_ID));
if (vendor != MFG_ID)
continue;
model = bswap16(epreadeeprom(iot, ioh, EEPROM_PROD_ID));
/*
* XXX: Add a new product id to check for other cards
* (3c515?) and fix the check in ep_isa_attach.
*/
if ((model & 0xfff0) != PROD_ID_3C509) {
#ifndef trusted
printf(
"ep_isa_probe: ignoring model %04x\n", model);
#endif
continue;
}
eeprom_addr_cfg = epreadeeprom(iot, ioh, EEPROM_ADDR_CFG);
iobase = (eeprom_addr_cfg & 0x1f) * 0x10 + 0x200;
irq = epreadeeprom(iot, ioh, EEPROM_RESOURCE_CFG);
irq >>= 12;
/* XXX Should ignore card if non-ISA(EISA) io address? -chb */
/*
* Don't attach a 3c509 in PnP mode.
* PnP mode was added with the 3C509B.
* Check some EEPROM registers to make sure this is really
* a 3C509B and test whether it is in PnP mode.
*/
if ((model & 0xfff0) == PROD_ID_3C509) {
u_int16_t cksum, eepromrev, eeprom_cap, eeprom_hi;
/*
* Fetch all the info we need to ascertain whether
* the card is PnP capable and in PnP mode.
* Skip over PnP cards.
*/
/* secondary configurable data checksum */
cksum = epreadeeprom(iot, ioh, EEPROM_CHECKSUM_EL3)
& 0xFF;
for (i = EEPROM_CONFIG_HIGH;
i < EEPROM_CHECKSUM_EL3; i++) {
cksum ^= epreadeeprom(iot, ioh, i);
}
cksum = (cksum & 0xFF) ^ ((cksum >> 8) & 0xFF);
eepromrev = epreadeeprom(iot, ioh, EEPROM_SSI);
eeprom_hi = epreadeeprom(iot, ioh, EEPROM_CONFIG_HIGH);
eeprom_cap = epreadeeprom(iot, ioh, EEPROM_CAP);
/*
* Stop card responding to contention in future.
* (NB: stops rsponse to all reads from ID port.)
*/
bus_space_write_1(iot, ioh, 0, TAG_ADAPTER + 1);
if (cksum != 0) {
#if 0
printf("ep_isa_probe: cksum mismatch 0x%02x\n",
(int)cksum);
#endif
}
else if ((eepromrev & 0xF) < 1) {
/* 3C509B is adapter revision level 1. */
#if 0
printf("ep_isa_probe: revision level 0\n");
#endif
}
else if (eeprom_cap != 0x2083) {
#if 0
printf("ep_isa_probe: capabilities word mismatch0x%03x\n",
(int)epreadeeprom(iot, ioh, EEPROM_CAP));
#endif
}
else
/*
* we have a 3c509B with PnP capabilities.
* Test partly documented bits which toggle when
* in PnP mode.
*/
if ((eeprom_hi & 0x8) != 0 || ((eeprom_hi & 0xc) == 0 &&
(eeprom_addr_cfg & 0x80) != 0)) {
printf("3COM 3C509B Ethernet card in PnP mode\n");
continue;
}
}
/*
* XXX: this should probably not be done here
* because it enables the drq/irq lines from
* the board. Perhaps it should be done after
* we have checked for irq/drq collisions?
*
* According to the 3COM docs, this does not enable
* the irq lines. -chb
*/
bus_space_write_1(iot, ioh, 0, ACTIVATE_ADAPTER_TO_CONFIG);
epaddcard(bus, iobase, irq, model);
}
/* XXX should we sort by ethernet address? */
bus_space_unmap(iot, ioh, 1);
bus_probed:
if (ia->ia_nio < 1)
return (0);
if (ia->ia_nirq < 1)
return (0);
for (i = 0; i < nepcards; i++) {
if (epcards[i].bus != bus)
continue;
if (epcards[i].available == 0)
continue;
if (ia->ia_io[0].ir_addr != ISA_UNKNOWN_PORT &&
ia->ia_io[0].ir_addr != epcards[i].iobase)
continue;
if (ia->ia_irq[0].ir_irq != ISA_UNKNOWN_IRQ &&
ia->ia_irq[0].ir_irq != epcards[i].irq)
continue;
goto good;
}
return 0;
good:
epcards[i].available = 0;
ia->ia_nio = 1;
ia->ia_io[0].ir_addr = epcards[i].iobase;
ia->ia_io[0].ir_size = 0x10;
ia->ia_nirq = 1;
ia->ia_irq[0].ir_irq = epcards[i].irq;
ia->ia_niomem = 0;
ia->ia_ndrq = 0;
ia->ia_aux = (void *)epcards[i].model;
return 1;
}
void
ep_isa_attach(device_t parent, device_t self, void *aux)
{
struct ep_softc *sc = device_private(self);
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
int chipset;
/* Map i/o space. */
if (bus_space_map(iot, ia->ia_io[0].ir_addr, 0x10, 0, &ioh)) {
printf(": can't map i/o space\n");
return;
}
sc->sc_dev = self;
sc->sc_iot = iot;
sc->sc_ioh = ioh;
sc->bustype = ELINK_BUS_ISA;
sc->enable = NULL;
sc->disable = NULL;
sc->enabled = 1;
chipset = (int)(long)ia->ia_aux;
if ((chipset & 0xfff0) == PROD_ID_3C509) {
printf(": 3Com 3C509 Ethernet\n");
epconfig(sc, ELINK_CHIPSET_3C509, NULL);
} else {
/*
* XXX: Maybe a 3c515, but the check in ep_isa_probe looks
* at the moment only for a 3c509.
*/
printf(": unknown 3Com Ethernet card: %04x\n", chipset);
return;
}
sc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq[0].ir_irq,
IST_EDGE, IPL_NET, epintr, sc);
}