NetBSD-5.0.2/sys/dev/isa/wds.c
/* $NetBSD: wds.c,v 1.69 2008/04/28 20:23:52 martin Exp $ */
/*
* XXX
* aborts
* resets
*/
/*-
* Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1994, 1995 Julian Highfield. All rights reserved.
* Portions copyright (c) 1994, 1996, 1997
* Charles M. Hannum. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Julian Highfield.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This driver is for the WD7000 family of SCSI controllers:
* the WD7000-ASC, a bus-mastering DMA controller,
* the WD7000-FASST2, an -ASC with new firmware and scatter-gather,
* and the WD7000-ASE, which was custom manufactured for Apollo
* workstations and seems to include an -ASC as well as floppy
* and ESDI interfaces.
*
* Loosely based on Theo Deraadt's unfinished attempt.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: wds.c,v 1.69 2008/04/28 20:23:52 martin Exp $");
#include "opt_ddb.h"
#undef WDSDIAG
#ifdef DDB
#define integrate
#else
#define integrate static inline
#endif
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <uvm/uvm_extern.h>
#include <sys/bus.h>
#include <sys/intr.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/isa/isavar.h>
#include <dev/isa/isadmavar.h>
#include <dev/isa/wdsreg.h>
#define WDS_ISA_IOSIZE 8
#ifndef DDB
#define Debugger() panic("should call debugger here (wds.c)")
#endif /* ! DDB */
#define WDS_MAXXFER ((WDS_NSEG - 1) << PGSHIFT)
#define WDS_MBX_SIZE 16
#define WDS_SCB_MAX 32
#define SCB_HASH_SIZE 32 /* hash table size for phystokv */
#define SCB_HASH_SHIFT 9
#define SCB_HASH(x) ((((long)(x))>>SCB_HASH_SHIFT) & (SCB_HASH_SIZE - 1))
#define wds_nextmbx(wmb, mbx, mbio) \
if ((wmb) == &(mbx)->mbio[WDS_MBX_SIZE - 1]) \
(wmb) = &(mbx)->mbio[0]; \
else \
(wmb)++;
struct wds_mbx {
struct wds_mbx_out mbo[WDS_MBX_SIZE];
struct wds_mbx_in mbi[WDS_MBX_SIZE];
struct wds_mbx_out *cmbo; /* Collection Mail Box out */
struct wds_mbx_out *tmbo; /* Target Mail Box out */
struct wds_mbx_in *tmbi; /* Target Mail Box in */
};
struct wds_softc {
struct device sc_dev;
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
bus_dma_tag_t sc_dmat;
bus_dmamap_t sc_dmamap_mbox; /* maps the mailbox */
void *sc_ih;
struct wds_mbx *sc_mbx;
#define wmbx (sc->sc_mbx)
struct wds_scb *sc_scbhash[SCB_HASH_SIZE];
TAILQ_HEAD(, wds_scb) sc_free_scb, sc_waiting_scb;
int sc_numscbs, sc_mbofull;
struct scsipi_adapter sc_adapter;
struct scsipi_channel sc_channel;
int sc_revision;
int sc_maxsegs;
};
struct wds_probe_data {
#ifdef notyet
int sc_irq, sc_drq;
#endif
int sc_scsi_dev;
};
integrate void
wds_wait(bus_space_tag_t, bus_space_handle_t, int, int, int);
int wds_cmd(bus_space_tag_t, bus_space_handle_t, u_char *, int);
integrate void wds_finish_scbs(struct wds_softc *);
int wdsintr(void *);
integrate void wds_reset_scb(struct wds_softc *, struct wds_scb *);
void wds_free_scb(struct wds_softc *, struct wds_scb *);
integrate int wds_init_scb(struct wds_softc *, struct wds_scb *);
struct wds_scb *wds_get_scb(struct wds_softc *);
struct wds_scb *wds_scb_phys_kv(struct wds_softc *, u_long);
void wds_queue_scb(struct wds_softc *, struct wds_scb *);
void wds_collect_mbo(struct wds_softc *);
void wds_start_scbs(struct wds_softc *);
void wds_done(struct wds_softc *, struct wds_scb *, u_char);
int wds_find(bus_space_tag_t, bus_space_handle_t, struct wds_probe_data *);
void wds_attach(struct wds_softc *, struct wds_probe_data *);
void wds_init(struct wds_softc *, int);
void wds_inquire_setup_information(struct wds_softc *);
void wdsminphys(struct buf *);
void wds_scsipi_request(struct scsipi_channel *,
scsipi_adapter_req_t, void *);
int wds_poll(struct wds_softc *, struct scsipi_xfer *, int);
int wds_ipoll(struct wds_softc *, struct wds_scb *, int);
void wds_timeout(void *);
int wds_create_scbs(struct wds_softc *, void *, size_t);
int wdsprobe(struct device *, struct cfdata *, void *);
void wdsattach(struct device *, struct device *, void *);
CFATTACH_DECL(wds, sizeof(struct wds_softc),
wdsprobe, wdsattach, NULL, NULL);
#ifdef WDSDEBUG
int wds_debug = 0;
#endif
#define WDS_ABORT_TIMEOUT 2000 /* time to wait for abort (mSec) */
integrate void
wds_wait(iot, ioh, port, mask, val)
bus_space_tag_t iot;
bus_space_handle_t ioh;
int port;
int mask, val;
{
while ((bus_space_read_1(iot, ioh, port) & mask) != val)
;
}
/*
* Write a command to the board's I/O ports.
*/
int
wds_cmd(iot, ioh, ibuf, icnt)
bus_space_tag_t iot;
bus_space_handle_t ioh;
u_char *ibuf;
int icnt;
{
u_char c;
wds_wait(iot, ioh, WDS_STAT, WDSS_RDY, WDSS_RDY);
while (icnt--) {
bus_space_write_1(iot, ioh, WDS_CMD, *ibuf++);
wds_wait(iot, ioh, WDS_STAT, WDSS_RDY, WDSS_RDY);
c = bus_space_read_1(iot, ioh, WDS_STAT);
if (c & WDSS_REJ)
return 1;
}
return 0;
}
/*
* Check for the presence of a WD7000 SCSI controller.
*/
int
wdsprobe(struct device *parent, struct cfdata *match,
void *aux)
{
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
struct wds_probe_data wpd;
int rv;
if (ia->ia_nio < 1)
return (0);
if (ia->ia_nirq < 1)
return (0);
if (ia->ia_ndrq < 1)
return (0);
if (ISA_DIRECT_CONFIG(ia))
return (0);
/* Disallow wildcarded i/o address. */
if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT)
return (0);
if (bus_space_map(iot, ia->ia_io[0].ir_addr, WDS_ISA_IOSIZE, 0, &ioh))
return (0);
rv = wds_find(iot, ioh, &wpd);
bus_space_unmap(iot, ioh, WDS_ISA_IOSIZE);
if (rv) {
#ifdef notyet
if (ia->ia_irq[0].ir_irq != ISA_UNKNOWN_IRQ &&
ia->ia_irq[0].ir_irq != wpd.sc_irq)
return (0);
if (ia->ia_drq[0].ir_drq != ISA_UNKNOWN_DRQ &&
ia->ia_drq[0].ir_drq != wpd.sc_drq)
return (0);
ia->ia_nirq = 1;
ia->ia_irq[0].ir_irq = wpd.sc_irq;
ia->ia_ndrq = 1;
ia->ia_drq[0].ir_drq = wpd.sc_drq;
#else
if (ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ)
return (0);
if (ia->ia_drq[0].ir_drq == ISA_UNKNOWN_DRQ)
return (0);
ia->ia_nirq = 1;
ia->ia_ndrq = 1;
#endif
ia->ia_nio = 1;
ia->ia_io[0].ir_size = WDS_ISA_IOSIZE;
ia->ia_niomem = 0;
}
return (rv);
}
/*
* Attach all available units.
*/
void
wdsattach(struct device *parent, struct device *self, void *aux)
{
struct isa_attach_args *ia = aux;
struct wds_softc *sc = (void *)self;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
struct wds_probe_data wpd;
isa_chipset_tag_t ic = ia->ia_ic;
int error;
printf("\n");
if (bus_space_map(iot, ia->ia_io[0].ir_addr, WDS_ISA_IOSIZE, 0, &ioh)) {
aprint_error_dev(&sc->sc_dev, "can't map i/o space\n");
return;
}
sc->sc_iot = iot;
sc->sc_ioh = ioh;
sc->sc_dmat = ia->ia_dmat;
if (!wds_find(iot, ioh, &wpd)) {
aprint_error_dev(&sc->sc_dev, "wds_find failed\n");
return;
}
bus_space_write_1(iot, ioh, WDS_HCR, WDSH_DRQEN);
#ifdef notyet
if (wpd.sc_drq != -1) {
if ((error = isa_dmacascade(ic, wpd.sc_drq)) != 0) {
aprint_error_dev(&sc->sc_dev, "unable to cascade DRQ, error = %d\n", error);
return;
}
}
sc->sc_ih = isa_intr_establish(ic, wpd.sc_irq, IST_EDGE, IPL_BIO,
wdsintr, sc);
#else
if ((error = isa_dmacascade(ic, ia->ia_drq[0].ir_drq)) != 0) {
aprint_error_dev(&sc->sc_dev, "unable to cascade DRQ, error = %d\n", error);
return;
}
sc->sc_ih = isa_intr_establish(ic, ia->ia_irq[0].ir_irq, IST_EDGE,
IPL_BIO, wdsintr, sc);
#endif
if (sc->sc_ih == NULL) {
aprint_error_dev(&sc->sc_dev, "couldn't establish interrupt\n");
return;
}
wds_attach(sc, &wpd);
}
void
wds_attach(sc, wpd)
struct wds_softc *sc;
struct wds_probe_data *wpd;
{
struct scsipi_adapter *adapt = &sc->sc_adapter;
struct scsipi_channel *chan = &sc->sc_channel;
TAILQ_INIT(&sc->sc_free_scb);
TAILQ_INIT(&sc->sc_waiting_scb);
/*
* Fill in the scsipi_adapter.
*/
memset(adapt, 0, sizeof(*adapt));
adapt->adapt_dev = &sc->sc_dev;
adapt->adapt_nchannels = 1;
/* adapt_openings initialized below */
adapt->adapt_max_periph = 1;
adapt->adapt_request = wds_scsipi_request;
adapt->adapt_minphys = minphys;
/*
* Fill in the scsipi_channel.
*/
memset(chan, 0, sizeof(*chan));
chan->chan_adapter = adapt;
chan->chan_bustype = &scsi_bustype;
chan->chan_channel = 0;
chan->chan_ntargets = 8;
chan->chan_nluns = 8;
chan->chan_id = wpd->sc_scsi_dev;
wds_init(sc, 0);
wds_inquire_setup_information(sc);
/* XXX add support for GROW */
adapt->adapt_openings = sc->sc_numscbs;
/*
* ask the adapter what subunits are present
*/
config_found(&sc->sc_dev, &sc->sc_channel, scsiprint);
}
integrate void
wds_finish_scbs(sc)
struct wds_softc *sc;
{
struct wds_mbx_in *wmbi;
struct wds_scb *scb;
int i;
wmbi = wmbx->tmbi;
if (wmbi->stat == WDS_MBI_FREE) {
for (i = 0; i < WDS_MBX_SIZE; i++) {
if (wmbi->stat != WDS_MBI_FREE) {
printf("%s: mbi not in round-robin order\n",
device_xname(&sc->sc_dev));
goto AGAIN;
}
wds_nextmbx(wmbi, wmbx, mbi);
}
#ifdef WDSDIAGnot
printf("%s: mbi interrupt with no full mailboxes\n",
device_xname(&sc->sc_dev));
#endif
return;
}
AGAIN:
do {
scb = wds_scb_phys_kv(sc, phystol(wmbi->scb_addr));
if (!scb) {
printf("%s: bad mbi scb pointer; skipping\n",
device_xname(&sc->sc_dev));
goto next;
}
#ifdef WDSDEBUG
if (wds_debug) {
u_char *cp = scb->cmd.xx;
printf("op=%x %x %x %x %x %x\n",
cp[0], cp[1], cp[2], cp[3], cp[4], cp[5]);
printf("stat %x for mbi addr = %p, ",
wmbi->stat, wmbi);
printf("scb addr = %p\n", scb);
}
#endif /* WDSDEBUG */
callout_stop(&scb->xs->xs_callout);
wds_done(sc, scb, wmbi->stat);
next:
wmbi->stat = WDS_MBI_FREE;
wds_nextmbx(wmbi, wmbx, mbi);
} while (wmbi->stat != WDS_MBI_FREE);
wmbx->tmbi = wmbi;
}
/*
* Process an interrupt.
*/
int
wdsintr(arg)
void *arg;
{
struct wds_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_char c;
/* Was it really an interrupt from the board? */
if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_IRQ) == 0)
return 0;
/* Get the interrupt status byte. */
c = bus_space_read_1(iot, ioh, WDS_IRQSTAT) & WDSI_MASK;
/* Acknowledge (which resets) the interrupt. */
bus_space_write_1(iot, ioh, WDS_IRQACK, 0x00);
switch (c) {
case WDSI_MSVC:
wds_finish_scbs(sc);
break;
case WDSI_MFREE:
wds_start_scbs(sc);
break;
default:
aprint_error_dev(&sc->sc_dev, "unrecognized interrupt type %02x", c);
break;
}
return 1;
}
integrate void
wds_reset_scb(struct wds_softc *sc, struct wds_scb *scb)
{
scb->flags = 0;
}
/*
* Free the command structure, the outgoing mailbox and the data buffer.
*/
void
wds_free_scb(sc, scb)
struct wds_softc *sc;
struct wds_scb *scb;
{
int s;
s = splbio();
wds_reset_scb(sc, scb);
TAILQ_INSERT_HEAD(&sc->sc_free_scb, scb, chain);
splx(s);
}
integrate int
wds_init_scb(sc, scb)
struct wds_softc *sc;
struct wds_scb *scb;
{
bus_dma_tag_t dmat = sc->sc_dmat;
int hashnum, error;
/*
* XXX Should we put a DIAGNOSTIC check for multiple
* XXX SCB inits here?
*/
memset(scb, 0, sizeof(struct wds_scb));
/*
* Create DMA maps for this SCB.
*/
error = bus_dmamap_create(dmat, sizeof(struct wds_scb), 1,
sizeof(struct wds_scb), 0, BUS_DMA_NOWAIT, &scb->dmamap_self);
if (error) {
aprint_error_dev(&sc->sc_dev, "can't create scb dmamap_self\n");
return (error);
}
error = bus_dmamap_create(dmat, WDS_MAXXFER, WDS_NSEG, WDS_MAXXFER,
0, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW, &scb->dmamap_xfer);
if (error) {
aprint_error_dev(&sc->sc_dev, "can't create scb dmamap_xfer\n");
bus_dmamap_destroy(dmat, scb->dmamap_self);
return (error);
}
/*
* Load the permanent DMA maps.
*/
error = bus_dmamap_load(dmat, scb->dmamap_self, scb,
sizeof(struct wds_scb), NULL, BUS_DMA_NOWAIT);
if (error) {
aprint_error_dev(&sc->sc_dev, "can't load scb dmamap_self\n");
bus_dmamap_destroy(dmat, scb->dmamap_self);
bus_dmamap_destroy(dmat, scb->dmamap_xfer);
return (error);
}
/*
* put in the phystokv hash table
* Never gets taken out.
*/
scb->hashkey = scb->dmamap_self->dm_segs[0].ds_addr;
hashnum = SCB_HASH(scb->hashkey);
scb->nexthash = sc->sc_scbhash[hashnum];
sc->sc_scbhash[hashnum] = scb;
wds_reset_scb(sc, scb);
return (0);
}
/*
* Create a set of scbs and add them to the free list.
*/
int
wds_create_scbs(sc, mem, size)
struct wds_softc *sc;
void *mem;
size_t size;
{
bus_dma_segment_t seg;
struct wds_scb *scb;
int rseg, error;
if (sc->sc_numscbs >= WDS_SCB_MAX)
return (0);
if ((scb = mem) != NULL)
goto have_mem;
size = PAGE_SIZE;
error = bus_dmamem_alloc(sc->sc_dmat, size, PAGE_SIZE, 0, &seg,
1, &rseg, BUS_DMA_NOWAIT);
if (error) {
aprint_error_dev(&sc->sc_dev, "can't allocate memory for scbs\n");
return (error);
}
error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, size,
(void *)&scb, BUS_DMA_NOWAIT|BUS_DMA_COHERENT);
if (error) {
aprint_error_dev(&sc->sc_dev, "can't map memory for scbs\n");
bus_dmamem_free(sc->sc_dmat, &seg, rseg);
return (error);
}
have_mem:
memset(scb, 0, size);
while (size > sizeof(struct wds_scb) && sc->sc_numscbs < WDS_SCB_MAX) {
error = wds_init_scb(sc, scb);
if (error) {
aprint_error_dev(&sc->sc_dev, "can't initialize scb\n");
return (error);
}
TAILQ_INSERT_TAIL(&sc->sc_free_scb, scb, chain);
scb = (struct wds_scb *)((char *)scb +
ALIGN(sizeof(struct wds_scb)));
size -= ALIGN(sizeof(struct wds_scb));
sc->sc_numscbs++;
}
return (0);
}
/*
* Get a free scb
*
* If there are none, see if we can allocate a new one. If so, put it in
* the hash table too otherwise either return an error or sleep.
*/
struct wds_scb *
wds_get_scb(sc)
struct wds_softc *sc;
{
struct wds_scb *scb;
int s;
s = splbio();
scb = TAILQ_FIRST(&sc->sc_free_scb);
if (scb != NULL) {
TAILQ_REMOVE(&sc->sc_free_scb, scb, chain);
scb->flags |= SCB_ALLOC;
}
splx(s);
return (scb);
}
struct wds_scb *
wds_scb_phys_kv(sc, scb_phys)
struct wds_softc *sc;
u_long scb_phys;
{
int hashnum = SCB_HASH(scb_phys);
struct wds_scb *scb = sc->sc_scbhash[hashnum];
while (scb) {
if (scb->hashkey == scb_phys)
break;
/* XXX Check to see if it matches the sense command block. */
if (scb->hashkey == (scb_phys - sizeof(struct wds_cmd)))
break;
scb = scb->nexthash;
}
return (scb);
}
/*
* Queue a SCB to be sent to the controller, and send it if possible.
*/
void
wds_queue_scb(sc, scb)
struct wds_softc *sc;
struct wds_scb *scb;
{
TAILQ_INSERT_TAIL(&sc->sc_waiting_scb, scb, chain);
wds_start_scbs(sc);
}
/*
* Garbage collect mailboxes that are no longer in use.
*/
void
wds_collect_mbo(sc)
struct wds_softc *sc;
{
struct wds_mbx_out *wmbo; /* Mail Box Out pointer */
#ifdef WDSDIAG
struct wds_scb *scb;
#endif
wmbo = wmbx->cmbo;
while (sc->sc_mbofull > 0) {
if (wmbo->cmd != WDS_MBO_FREE)
break;
#ifdef WDSDIAG
scb = wds_scb_phys_kv(sc, phystol(wmbo->scb_addr));
scb->flags &= ~SCB_SENDING;
#endif
--sc->sc_mbofull;
wds_nextmbx(wmbo, wmbx, mbo);
}
wmbx->cmbo = wmbo;
}
/*
* Send as many SCBs as we have empty mailboxes for.
*/
void
wds_start_scbs(sc)
struct wds_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct wds_mbx_out *wmbo; /* Mail Box Out pointer */
struct wds_scb *scb;
u_char c;
wmbo = wmbx->tmbo;
while ((scb = sc->sc_waiting_scb.tqh_first) != NULL) {
if (sc->sc_mbofull >= WDS_MBX_SIZE) {
wds_collect_mbo(sc);
if (sc->sc_mbofull >= WDS_MBX_SIZE) {
c = WDSC_IRQMFREE;
wds_cmd(iot, ioh, &c, sizeof c);
break;
}
}
TAILQ_REMOVE(&sc->sc_waiting_scb, scb, chain);
#ifdef WDSDIAG
scb->flags |= SCB_SENDING;
#endif
/* Link scb to mbo. */
ltophys(scb->dmamap_self->dm_segs[0].ds_addr +
offsetof(struct wds_scb, cmd), wmbo->scb_addr);
/* XXX What about aborts? */
wmbo->cmd = WDS_MBO_START;
/* Tell the card to poll immediately. */
c = WDSC_MSTART(wmbo - wmbx->mbo);
wds_cmd(sc->sc_iot, sc->sc_ioh, &c, sizeof c);
if ((scb->flags & SCB_POLLED) == 0)
callout_reset(&scb->xs->xs_callout,
mstohz(scb->timeout), wds_timeout, scb);
++sc->sc_mbofull;
wds_nextmbx(wmbo, wmbx, mbo);
}
wmbx->tmbo = wmbo;
}
/*
* Process the result of a SCSI command.
*/
void
wds_done(sc, scb, stat)
struct wds_softc *sc;
struct wds_scb *scb;
u_char stat;
{
bus_dma_tag_t dmat = sc->sc_dmat;
struct scsipi_xfer *xs = scb->xs;
/* XXXXX */
/* Don't release the SCB if it was an internal command. */
if (xs == 0) {
scb->flags |= SCB_DONE;
return;
}
/*
* If we were a data transfer, unload the map that described
* the data buffer.
*/
if (xs->datalen) {
bus_dmamap_sync(dmat, scb->dmamap_xfer, 0,
scb->dmamap_xfer->dm_mapsize,
(xs->xs_control & XS_CTL_DATA_IN) ?
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(dmat, scb->dmamap_xfer);
}
if (xs->error == XS_NOERROR) {
/* If all went well, or an error is acceptable. */
if (stat == WDS_MBI_OK) {
/* OK, set the result */
xs->resid = 0;
} else {
/* Check the mailbox status. */
switch (stat) {
case WDS_MBI_OKERR:
/*
* SCSI error recorded in scb,
* counts as WDS_MBI_OK
*/
switch (scb->cmd.venderr) {
case 0x00:
aprint_error_dev(&sc->sc_dev, "Is this "
"an error?\n");
/* Experiment. */
xs->error = XS_DRIVER_STUFFUP;
break;
case 0x01:
#if 0
aprint_error_dev(&sc->sc_dev, "OK, see SCSI "
"error field.\n");
#endif
if (scb->cmd.stat == SCSI_CHECK ||
scb->cmd.stat == SCSI_BUSY) {
xs->status = scb->cmd.stat;
xs->error = XS_BUSY;
}
break;
case 0x40:
#if 0
printf("%s: DMA underrun!\n",
device_xname(&sc->sc_dev));
#endif
/*
* Hits this if the target
* returns fewer that datalen
* bytes (eg my CD-ROM, which
* returns a short version
* string, or if DMA is
* turned off etc.
*/
xs->resid = 0;
break;
default:
printf("%s: VENDOR ERROR "
"%02x, scsi %02x\n",
device_xname(&sc->sc_dev),
scb->cmd.venderr,
scb->cmd.stat);
/* Experiment. */
xs->error = XS_DRIVER_STUFFUP;
break;
}
break;
case WDS_MBI_ETIME:
/*
* The documentation isn't clear on
* what conditions might generate this,
* but selection timeouts are the only
* one I can think of.
*/
xs->error = XS_SELTIMEOUT;
break;
case WDS_MBI_ERESET:
case WDS_MBI_ETARCMD:
case WDS_MBI_ERESEL:
case WDS_MBI_ESEL:
case WDS_MBI_EABORT:
case WDS_MBI_ESRESET:
case WDS_MBI_EHRESET:
xs->error = XS_DRIVER_STUFFUP;
break;
}
}
} /* XS_NOERROR */
wds_free_scb(sc, scb);
scsipi_done(xs);
}
int
wds_find(iot, ioh, sc)
bus_space_tag_t iot;
bus_space_handle_t ioh;
struct wds_probe_data *sc;
{
int i;
/* XXXXX */
/*
* Sending a command causes the CMDRDY bit to clear.
*/
for (i = 5; i; i--) {
if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_RDY) != 0)
break;
delay(100);
}
if (!i)
return 0;
bus_space_write_1(iot, ioh, WDS_CMD, WDSC_NOOP);
if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_RDY) != 0)
return 0;
bus_space_write_1(iot, ioh, WDS_HCR, WDSH_SCSIRESET|WDSH_ASCRESET);
delay(10000);
bus_space_write_1(iot, ioh, WDS_HCR, 0x00);
delay(500000);
wds_wait(iot, ioh, WDS_STAT, WDSS_RDY, WDSS_RDY);
if (bus_space_read_1(iot, ioh, WDS_IRQSTAT) != 1)
if (bus_space_read_1(iot, ioh, WDS_IRQSTAT) != 7)
return 0;
for (i = 2000; i; i--) {
if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_RDY) != 0)
break;
delay(100);
}
if (!i)
return 0;
if (sc) {
#ifdef notyet
sc->sc_irq = ...;
sc->sc_drq = ...;
#endif
/* XXX Can we do this better? */
sc->sc_scsi_dev = 7;
}
return 1;
}
/*
* Initialise the board and driver.
*/
void
wds_init(sc, isreset)
struct wds_softc *sc;
int isreset;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
bus_dma_segment_t seg;
struct wds_setup init;
u_char c;
int i, rseg;
if (isreset)
goto doinit;
/*
* Allocate the mailbox.
*/
if (bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE, PAGE_SIZE, 0, &seg, 1,
&rseg, BUS_DMA_NOWAIT) ||
bus_dmamem_map(sc->sc_dmat, &seg, rseg, PAGE_SIZE,
(void **)&wmbx, BUS_DMA_NOWAIT|BUS_DMA_COHERENT))
panic("wds_init: can't create or map mailbox");
/*
* Since DMA memory allocation is always rounded up to a
* page size, create some scbs from the leftovers.
*/
if (wds_create_scbs(sc, ((char *)wmbx) +
ALIGN(sizeof(struct wds_mbx)),
PAGE_SIZE - ALIGN(sizeof(struct wds_mbx))))
panic("wds_init: can't create scbs");
/*
* Create and load the mailbox DMA map.
*/
if (bus_dmamap_create(sc->sc_dmat, sizeof(struct wds_mbx), 1,
sizeof(struct wds_mbx), 0, BUS_DMA_NOWAIT, &sc->sc_dmamap_mbox) ||
bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_mbox, wmbx,
sizeof(struct wds_mbx), NULL, BUS_DMA_NOWAIT))
panic("wds_ionit: can't create or load mailbox DMA map");
doinit:
/*
* Set up initial mail box for round-robin operation.
*/
for (i = 0; i < WDS_MBX_SIZE; i++) {
wmbx->mbo[i].cmd = WDS_MBO_FREE;
wmbx->mbi[i].stat = WDS_MBI_FREE;
}
wmbx->cmbo = wmbx->tmbo = &wmbx->mbo[0];
wmbx->tmbi = &wmbx->mbi[0];
sc->sc_mbofull = 0;
init.opcode = WDSC_INIT;
init.scsi_id = sc->sc_channel.chan_id;
init.buson_t = 48;
init.busoff_t = 24;
init.xx = 0;
ltophys(sc->sc_dmamap_mbox->dm_segs[0].ds_addr, init.mbaddr);
init.nomb = init.nimb = WDS_MBX_SIZE;
wds_cmd(iot, ioh, (u_char *)&init, sizeof init);
wds_wait(iot, ioh, WDS_STAT, WDSS_INIT, WDSS_INIT);
c = WDSC_DISUNSOL;
wds_cmd(iot, ioh, &c, sizeof c);
}
/*
* Read the board's firmware revision information.
*/
void
wds_inquire_setup_information(sc)
struct wds_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct wds_scb *scb;
u_char *j;
int s;
sc->sc_maxsegs = 1;
scb = wds_get_scb(sc);
if (scb == 0)
panic("wds_inquire_setup_information: no scb available");
scb->xs = NULL;
scb->timeout = 40;
memset(&scb->cmd, 0, sizeof scb->cmd);
scb->cmd.write = 0x80;
scb->cmd.opcode = WDSX_GETFIRMREV;
/* Will poll card, await result. */
bus_space_write_1(iot, ioh, WDS_HCR, WDSH_DRQEN);
scb->flags |= SCB_POLLED;
s = splbio();
wds_queue_scb(sc, scb);
splx(s);
if (wds_ipoll(sc, scb, scb->timeout))
goto out;
/* Print the version number. */
printf("%s: version %x.%02x ", device_xname(&sc->sc_dev),
scb->cmd.targ, scb->cmd.scb[0]);
sc->sc_revision = (scb->cmd.targ << 8) | scb->cmd.scb[0];
/* Print out the version string. */
j = 2 + &(scb->cmd.targ);
while ((*j >= 32) && (*j < 128)) {
printf("%c", *j);
j++;
}
/*
* Determine if we can use scatter/gather.
*/
if (sc->sc_revision >= 0x800)
sc->sc_maxsegs = WDS_NSEG;
out:
printf("\n");
/*
* Free up the resources used by this scb.
*/
wds_free_scb(sc, scb);
}
void
wdsminphys(bp)
struct buf *bp;
{
if (bp->b_bcount > WDS_MAXXFER)
bp->b_bcount = WDS_MAXXFER;
minphys(bp);
}
/*
* Send a SCSI command.
*/
void
wds_scsipi_request(chan, req, arg)
struct scsipi_channel *chan;
scsipi_adapter_req_t req;
void *arg;
{
struct scsipi_xfer *xs;
struct scsipi_periph *periph;
struct wds_softc *sc = (void *)chan->chan_adapter->adapt_dev;
bus_dma_tag_t dmat = sc->sc_dmat;
struct wds_scb *scb;
int error, seg, flags, s;
switch (req) {
case ADAPTER_REQ_RUN_XFER:
xs = arg;
periph = xs->xs_periph;
if (xs->xs_control & XS_CTL_RESET) {
/* XXX Fix me! */
printf("%s: reset!\n", device_xname(&sc->sc_dev));
wds_init(sc, 1);
scsipi_done(xs);
return;
}
if (xs->xs_control & XS_CTL_DATA_UIO) {
/* XXX Fix me! */
/*
* Let's not worry about UIO. There isn't any code
* for the non-SG boards anyway!
*/
aprint_error_dev(&sc->sc_dev, "UIO is untested and disabled!\n");
xs->error = XS_DRIVER_STUFFUP;
scsipi_done(xs);
return;
}
flags = xs->xs_control;
/* Get an SCB to use. */
scb = wds_get_scb(sc);
#ifdef DIAGNOSTIC
/*
* This should never happen as we track the resources
* in the mid-layer.
*/
if (scb == NULL) {
scsipi_printaddr(periph);
printf("unable to allocate scb\n");
panic("wds_scsipi_request");
}
#endif
scb->xs = xs;
scb->timeout = xs->timeout;
/* Zero out the command structure. */
if (xs->cmdlen > sizeof(scb->cmd.scb)) {
aprint_error_dev(&sc->sc_dev, "cmdlen %d too large for SCB\n",
xs->cmdlen);
xs->error = XS_DRIVER_STUFFUP;
goto out_bad;
}
memset(&scb->cmd, 0, sizeof scb->cmd);
memcpy(&scb->cmd.scb, xs->cmd, xs->cmdlen);
/* Set up some of the command fields. */
scb->cmd.targ = (periph->periph_target << 5) |
periph->periph_lun;
/*
* NOTE: cmd.write may be OK as 0x40 (disable direction
* checking) on boards other than the WD-7000V-ASE. Need
* this for the ASE:
*/
scb->cmd.write = (xs->xs_control & XS_CTL_DATA_IN) ?
0x80 : 0x00;
if (xs->datalen) {
seg = 0;
#ifdef TFS
if (flags & XS_CTL_DATA_UIO) {
error = bus_dmamap_load_uio(dmat,
scb->dmamap_xfer, (struct uio *)xs->data,
BUS_DMA_NOWAIT |
((flags & XS_CTL_DATA_IN) ? BUS_DMA_READ :
BUS_DMA_WRITE));
} else
#endif /* TFS */
{
error = bus_dmamap_load(dmat,
scb->dmamap_xfer, xs->data, xs->datalen,
NULL, BUS_DMA_NOWAIT |
((flags & XS_CTL_DATA_IN) ? BUS_DMA_READ :
BUS_DMA_WRITE));
}
switch (error) {
case 0:
break;
case ENOMEM:
case EAGAIN:
xs->error = XS_RESOURCE_SHORTAGE;
goto out_bad;
default:
xs->error = XS_DRIVER_STUFFUP;
aprint_error_dev(&sc->sc_dev, "error %d loading DMA map\n", error);
out_bad:
wds_free_scb(sc, scb);
scsipi_done(xs);
return;
}
bus_dmamap_sync(dmat, scb->dmamap_xfer, 0,
scb->dmamap_xfer->dm_mapsize,
(flags & XS_CTL_DATA_IN) ? BUS_DMASYNC_PREREAD :
BUS_DMASYNC_PREWRITE);
if (sc->sc_maxsegs > 1) {
/*
* Load the hardware scatter/gather map with the
* contents of the DMA map.
*/
for (seg = 0;
seg < scb->dmamap_xfer->dm_nsegs; seg++) {
ltophys(scb->dmamap_xfer->dm_segs[seg].ds_addr,
scb->scat_gath[seg].seg_addr);
ltophys(scb->dmamap_xfer->dm_segs[seg].ds_len,
scb->scat_gath[seg].seg_len);
}
/*
* Set up for scatter/gather transfer.
*/
scb->cmd.opcode = WDSX_SCSISG;
ltophys(scb->dmamap_self->dm_segs[0].ds_addr +
offsetof(struct wds_scb, scat_gath),
scb->cmd.data);
ltophys(scb->dmamap_self->dm_nsegs *
sizeof(struct wds_scat_gath), scb->cmd.len);
} else {
/*
* This board is an ASC or an ASE, and the
* transfer has been mapped contig for us.
*/
scb->cmd.opcode = WDSX_SCSICMD;
ltophys(scb->dmamap_xfer->dm_segs[0].ds_addr,
scb->cmd.data);
ltophys(scb->dmamap_xfer->dm_segs[0].ds_len,
scb->cmd.len);
}
} else {
scb->cmd.opcode = WDSX_SCSICMD;
ltophys(0, scb->cmd.data);
ltophys(0, scb->cmd.len);
}
scb->cmd.stat = 0x00;
scb->cmd.venderr = 0x00;
ltophys(0, scb->cmd.link);
/* XXX Do we really want to do this? */
if (flags & XS_CTL_POLL) {
/* Will poll card, await result. */
bus_space_write_1(sc->sc_iot, sc->sc_ioh,
WDS_HCR, WDSH_DRQEN);
scb->flags |= SCB_POLLED;
} else {
/*
* Will send command, let interrupt routine
* handle result.
*/
bus_space_write_1(sc->sc_iot, sc->sc_ioh, WDS_HCR,
WDSH_IRQEN | WDSH_DRQEN);
}
s = splbio();
wds_queue_scb(sc, scb);
splx(s);
if ((flags & XS_CTL_POLL) == 0)
return;
if (wds_poll(sc, xs, scb->timeout)) {
wds_timeout(scb);
if (wds_poll(sc, xs, scb->timeout))
wds_timeout(scb);
}
return;
case ADAPTER_REQ_GROW_RESOURCES:
/* XXX Not supported. */
return;
case ADAPTER_REQ_SET_XFER_MODE:
/* XXX How do we do this? */
return;
}
}
/*
* Poll a particular unit, looking for a particular scb
*/
int
wds_poll(sc, xs, count)
struct wds_softc *sc;
struct scsipi_xfer *xs;
int count;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
/* timeouts are in msec, so we loop in 1000 usec cycles */
while (count) {
/*
* If we had interrupts enabled, would we
* have got an interrupt?
*/
if (bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_IRQ)
wdsintr(sc);
if (xs->xs_status & XS_STS_DONE)
return 0;
delay(1000); /* only happens in boot so ok */
count--;
}
return 1;
}
/*
* Poll a particular unit, looking for a particular scb
*/
int
wds_ipoll(sc, scb, count)
struct wds_softc *sc;
struct wds_scb *scb;
int count;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
/* timeouts are in msec, so we loop in 1000 usec cycles */
while (count) {
/*
* If we had interrupts enabled, would we
* have got an interrupt?
*/
if (bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_IRQ)
wdsintr(sc);
if (scb->flags & SCB_DONE)
return 0;
delay(1000); /* only happens in boot so ok */
count--;
}
return 1;
}
void
wds_timeout(arg)
void *arg;
{
struct wds_scb *scb = arg;
struct scsipi_xfer *xs = scb->xs;
struct scsipi_periph *periph = xs->xs_periph;
struct wds_softc *sc =
(void *)periph->periph_channel->chan_adapter->adapt_dev;
int s;
scsipi_printaddr(periph);
printf("timed out");
s = splbio();
#ifdef WDSDIAG
/*
* If The scb's mbx is not free, then the board has gone south?
*/
wds_collect_mbo(sc);
if (scb->flags & SCB_SENDING) {
aprint_error_dev(&sc->sc_dev, "not taking commands!\n");
Debugger();
}
#endif
/*
* If it has been through before, then
* a previous abort has failed, don't
* try abort again
*/
if (scb->flags & SCB_ABORT) {
/* abort timed out */
printf(" AGAIN\n");
/* XXX Must reset! */
} else {
/* abort the operation that has timed out */
printf("\n");
scb->xs->error = XS_TIMEOUT;
scb->timeout = WDS_ABORT_TIMEOUT;
scb->flags |= SCB_ABORT;
wds_queue_scb(sc, scb);
}
splx(s);
}