NetBSD-5.0.2/sys/dev/mii/mvphy.c
/* $NetBSD: mvphy.c,v 1.7 2008/05/04 17:06:10 xtraeme Exp $ */
/*-
* Copyright (c) 2006 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Driver for Marvell 88E6060 10/100 5-port PHY switch.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: mvphy.c,v 1.7 2008/05/04 17:06:10 xtraeme Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/socket.h>
#include <sys/errno.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/mii/miidevs.h>
#include <dev/mii/mvphyreg.h>
#define MV_PORT(sc) ((sc)->mii_phy - 16) /* PHY # to switch port */
#define MV_CPU_PORT 5 /* port # of CPU port */
#define MV_READ(p, phy, r) \
(*(p)->mii_pdata->mii_readreg)(device_parent(&(p)->mii_dev), \
phy, (r))
#define MV_WRITE(p, phy, r, v) \
(*(p)->mii_pdata->mii_writereg)(device_parent(&(p)->mii_dev), \
phy, (r), (v))
/* XXX sysctl'able */
#define MV_ATUCTRL_ATU_SIZE_DEFAULT 2 /* 1024 entry database */
#define MV_ATUCTRL_AGE_TIME_DEFAULT 19 /* 19 * 16 = 304 seconds */
/*
* Register manipulation macros that expect bit field defines
* to follow the convention that an _S suffix is appended for
* a shift count, while the field mask has no suffix.
*/
#define SM(_v, _f) (((_v) << _f##_S) & _f)
#define MS(_v, _f) (((_v) & _f) >> _f##_S)
static int mvphymatch(device_t, cfdata_t, void *);
static void mvphyattach(device_t, device_t, void *);
CFATTACH_DECL_NEW(mvphy, sizeof(struct mii_softc),
mvphymatch, mvphyattach, mii_phy_detach, mii_phy_activate);
static int mvphy_service(struct mii_softc *, struct mii_data *, int);
static void mvphy_status(struct mii_softc *);
static void mvphy_reset(struct mii_softc *sc);
static const struct mii_phy_funcs mvphy_funcs = {
mvphy_service, mvphy_status, mvphy_reset,
};
static const struct mii_phydesc mvphys[] = {
{ MII_OUI_xxMARVELL, MII_MODEL_xxMARVELL_E6060,
MII_STR_xxMARVELL_E6060 },
{ 0, 0,
NULL },
};
/*
* On AP30/AR5312 the switch is configured in one of two ways:
* as a ROUTER or as a BRIDGE. The ROUTER config sets up ports
* 0-3 as LAN ports, port 4 as the WAN port, and port 5 connects
* to the MAC in the 5312. The BRIDGE config sets up ports
* 0-4 as LAN ports with port 5 connected to the MAC in the 5312.
*/
struct mvPhyConfig {
uint16_t switchPortAddr;/* switch port associated with PHY */
uint16_t vlanSetting; /* VLAN table setting for PHY */
uint32_t portControl; /* switch port control setting for PHY */
};
static const struct mvPhyConfig dumbConfig[] = {
{ 0x18, 0x2e, /* PHY port 0 = LAN port 0 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x19, 0x2d, /* PHY port 1 = LAN port 1 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x1a, 0x2b, /* PHY port 2 = LAN port 2 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x1b, 0x27, /* PHY port 3 = LAN port 3 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x1c, 0x25, /* PHY port 4 = LAN port 4 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x1d, 0x1f, /* PHY port 5 = CPU port */
MV_PORT_CONTROL_PORT_STATE_FORWARDING }
};
static const struct mvPhyConfig routerConfig[] = {
{ 0x18, 0x2e, /* PHY port 0 = LAN port 0 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x19, 0x2d, /* PHY port 1 = LAN port 1 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x1a, 0x2b, /* PHY port 2 = LAN port 2 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x1b, 0x27, /* PHY port 3 = LAN port 3 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x1c, 0x1020, /* PHY port 4 = WAN port */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
/* NB: 0x0f =>'s send only to LAN ports */
{ 0x1d, 0x0f, /* PHY port 5 = CPU port */
MV_PORT_CONTROL_PORT_STATE_FORWARDING
#if 0
| MV_PORT_CONTROL_INGRESS_TRAILER
| MV_PORT_CONTROL_EGRESS_MODE
#endif
}
};
static const struct mvPhyConfig bridgeConfig[] = {
{ 0x18, 0x3e, /* PHY port 0 = LAN port 0 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x19, 0x3d, /* PHY port 1 = LAN port 1 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x1a, 0x3b, /* PHY port 2 = LAN port 2 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x1b, 0x37, /* PHY port 3 = LAN port 3 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
{ 0x1c, 0x37, /* PHY port 4 = LAN port 4 */
MV_PORT_CONTROL_PORT_STATE_FORWARDING },
/* NB: 0x1f =>'s send to all ports */
{ 0x1d, 0x1f, /* PHY port 5 = CPU port */
MV_PORT_CONTROL_PORT_STATE_FORWARDING
#if 0
| MV_PORT_CONTROL_INGRESS_TRAILER
| MV_PORT_CONTROL_EGRESS_MODE
#endif
}
};
static void mvphy_switchconfig(struct mii_softc *, int);
static void mvphy_flushatu(struct mii_softc *);
static int
mvphymatch(device_t parent, cfdata_t match, void *aux)
{
struct mii_attach_args *ma = aux;
if (mii_phy_match(ma, mvphys) != NULL)
return (10);
return (0);
}
static void
mvphyattach(device_t parent, device_t self, void *aux)
{
struct mii_softc *sc = device_private(self);
struct mii_attach_args *ma = aux;
struct mii_data *mii = ma->mii_data;
const struct mii_phydesc *mpd;
mpd = mii_phy_match(ma, mvphys);
aprint_naive(": Media interface\n");
aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));
sc->mii_dev = self;
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
sc->mii_funcs = &mvphy_funcs;
sc->mii_pdata = mii;
sc->mii_flags = ma->mii_flags;
sc->mii_anegticks = MII_ANEGTICKS;
if (MV_PORT(sc) == 0) { /* NB: only when attaching first PHY */
/*
* Set the global switch settings and configure the
* CPU port since it does not probe as a visible PHY.
*/
MV_WRITE(sc, MII_MV_SWITCH_GLOBAL_ADDR, MV_ATU_CONTROL,
SM(MV_ATUCTRL_AGE_TIME_DEFAULT, MV_ATUCTRL_AGE_TIME)
| SM(MV_ATUCTRL_ATU_SIZE_DEFAULT, MV_ATUCTRL_ATU_SIZE));
mvphy_switchconfig(sc, MV_CPU_PORT);
}
PHY_RESET(sc);
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
aprint_normal_dev(self, "");
if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
aprint_error("no media present");
else
mii_phy_add_media(sc);
aprint_normal("\n");
if (!pmf_device_register(self, NULL, mii_phy_resume))
aprint_error_dev(self, "couldn't establish power handler\n");
}
static int
mvphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
switch (cmd) {
case MII_POLLSTAT:
/*
* If we're not polling our PHY instance, just return.
*/
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
return (0);
break;
case MII_MEDIACHG:
/*
* If the media indicates a different PHY instance,
* isolate ourselves.
*/
if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
/* XXX? */
return (0);
}
/*
* If the interface is not up, don't do anything.
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
mii_phy_setmedia(sc);
break;
case MII_TICK:
/*
* If we're not currently selected, just return.
*/
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
return (0);
if (mii_phy_tick(sc) == EJUSTRETURN)
return (0);
break;
case MII_DOWN:
mii_phy_down(sc);
return (0);
}
/* Update the media status. */
mii_phy_status(sc);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
return (0);
}
static void
mvphy_status(struct mii_softc *sc)
{
struct mii_data *mii = sc->mii_pdata;
int hwstatus;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
hwstatus = PHY_READ(sc, MII_MV_PHY_SPECIFIC_STATUS);
if (hwstatus & MV_STATUS_REAL_TIME_LINK_UP) {
mii->mii_media_status |= IFM_ACTIVE;
if (hwstatus & MV_STATUS_RESOLVED_SPEED_100)
mii->mii_media_active |= IFM_100_TX;
else
mii->mii_media_active |= IFM_10_T;
if (hwstatus & MV_STATUS_RESOLVED_DUPLEX_FULL)
mii->mii_media_active |= IFM_FDX;
} else {
mii->mii_media_active |= IFM_NONE;
/* XXX flush ATU only on link down transition */
mvphy_flushatu(sc);
}
}
static void
mvphy_reset(struct mii_softc *sc)
{
/* XXX handle fixed media config */
PHY_WRITE(sc, MII_BMCR, BMCR_RESET | BMCR_AUTOEN);
mvphy_switchconfig(sc, MV_PORT(sc));
}
/*
* Configure switch for the specified port.
*/
static void
mvphy_switchconfig(struct mii_softc *sc, int port)
{
/* XXX router vs bridge */
/*const struct mvPhyConfig *conf = &routerConfig[port];*/
/*const struct mvPhyConfig *conf = &bridgeConfig[port];*/
const struct mvPhyConfig *conf = &dumbConfig[port];
MV_WRITE(sc, conf->switchPortAddr, MV_PORT_BASED_VLAN_MAP,
conf->vlanSetting);
/* XXX administrative control of port enable? */
MV_WRITE(sc, conf->switchPortAddr, MV_PORT_CONTROL, conf->portControl);
MV_WRITE(sc, conf->switchPortAddr, MV_PORT_ASSOCIATION_VECTOR, 1<<port);
}
/*
* Flush the Address Translation Unit (ATU).
*/
static void
mvphy_flushatu(struct mii_softc *sc)
{
uint16_t status;
int i;
/* wait for any previous request to complete */
/* XXX if busy defer to tick */
/* XXX timeout */
for (i = 0; i < 1000; i++) {
status = MV_READ(sc, MII_MV_SWITCH_GLOBAL_ADDR,
MV_ATU_OPERATION);
if (MV_ATU_IS_BUSY(status))
break;
}
if (i != 1000) {
MV_WRITE(sc, MII_MV_SWITCH_GLOBAL_ADDR, MV_ATU_OPERATION,
MV_ATU_OP_FLUSH_ALL | MV_ATU_BUSY);
} /*else
printf("%s: timeout waiting for ATU flush\n",
device_xname(sc->mii_dev));*/
}