NetBSD-5.0.2/sys/dev/pci/if_wi_pci.c
/* $NetBSD: if_wi_pci.c,v 1.45 2008/04/28 20:23:55 martin Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Hideaki Imaizumi <hiddy@sfc.wide.ad.jp>
* and Ichiro FUKUHARA (ichiro@ichiro.org).
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* PCI bus front-end for the Intersil PCI WaveLan.
* Works with Prism2.5 Mini-PCI wavelan.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_wi_pci.c,v 1.45 2008/04/28 20:23:55 martin Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/syslog.h>
#include <sys/socket.h>
#include <sys/device.h>
#include <sys/callout.h>
#include <net/if.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#include <net80211/ieee80211_netbsd.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_radiotap.h>
#include <net80211/ieee80211_rssadapt.h>
#include <sys/bus.h>
#include <sys/intr.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/ic/wi_ieee.h>
#include <dev/ic/wireg.h>
#include <dev/ic/wivar.h>
#define WI_PCI_CBMA 0x10 /* Configuration Base Memory Address */
#define WI_PCI_PLX_LOMEM 0x10 /* PLX chip membase */
#define WI_PCI_PLX_LOIO 0x14 /* PLX chip iobase */
#define WI_PCI_LOMEM 0x18 /* ISA membase */
#define WI_PCI_LOIO 0x1C /* ISA iobase */
#define CHIP_PLX_OTHER 0x01
#define CHIP_PLX_9052 0x02
#define CHIP_TMD_7160 0x03
#define WI_PLX_COR_OFFSET 0x3E0
#define WI_PLX_COR_VALUE 0x41
struct wi_pci_softc {
struct wi_softc psc_wi; /* real "wi" softc */
/* PCI-specific goo */
pci_intr_handle_t psc_ih;
pci_chipset_tag_t psc_pc;
pcitag_t psc_pcitag;
};
static int wi_pci_match(struct device *, struct cfdata *, void *);
static void wi_pci_attach(struct device *, struct device *, void *);
static int wi_pci_enable(struct wi_softc *);
static void wi_pci_disable(struct wi_softc *);
static void wi_pci_reset(struct wi_softc *);
static const struct wi_pci_product
*wi_pci_lookup(struct pci_attach_args *);
CFATTACH_DECL(wi_pci, sizeof(struct wi_pci_softc),
wi_pci_match, wi_pci_attach, NULL, NULL);
static const struct wi_pci_product {
pci_vendor_id_t wpp_vendor; /* vendor ID */
pci_product_id_t wpp_product; /* product ID */
int wpp_chip; /* uses other chip */
} wi_pci_products[] = {
{ PCI_VENDOR_GLOBALSUN, PCI_PRODUCT_GLOBALSUN_GL24110P,
CHIP_PLX_OTHER },
{ PCI_VENDOR_GLOBALSUN, PCI_PRODUCT_GLOBALSUN_GL24110P02,
CHIP_PLX_OTHER },
{ PCI_VENDOR_EUMITCOM, PCI_PRODUCT_EUMITCOM_WL11000P,
CHIP_PLX_OTHER },
{ PCI_VENDOR_3COM, PCI_PRODUCT_3COM_3CRWE777A,
CHIP_PLX_OTHER },
{ PCI_VENDOR_NETGEAR, PCI_PRODUCT_NETGEAR_MA301,
CHIP_PLX_OTHER },
{ PCI_VENDOR_INTERSIL, PCI_PRODUCT_INTERSIL_MINI_PCI_WLAN,
0 },
{ PCI_VENDOR_NDC, PCI_PRODUCT_NDC_NCP130,
CHIP_PLX_9052 },
{ PCI_VENDOR_USR2, PCI_PRODUCT_USR2_2415,
CHIP_PLX_OTHER },
{ PCI_VENDOR_NDC, PCI_PRODUCT_NDC_NCP130A2,
CHIP_TMD_7160 },
{ 0, 0,
0},
};
static int
wi_pci_enable(struct wi_softc *sc)
{
struct wi_pci_softc *psc = (struct wi_pci_softc *)sc;
/* establish the interrupt. */
sc->sc_ih = pci_intr_establish(psc->psc_pc,
psc->psc_ih, IPL_NET, wi_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(&sc->sc_dev, "couldn't establish interrupt\n");
return (EIO);
}
/* reset HFA3842 MAC core */
if (sc->sc_reset != NULL)
wi_pci_reset(sc);
return (0);
}
static void
wi_pci_disable(struct wi_softc *sc)
{
struct wi_pci_softc *psc = (struct wi_pci_softc *)sc;
pci_intr_disestablish(psc->psc_pc, sc->sc_ih);
}
static void
wi_pci_reset(struct wi_softc *sc)
{
int i, secs, usecs;
bus_space_write_2(sc->sc_iot, sc->sc_ioh,
WI_PCI_COR, WI_COR_SOFT_RESET);
DELAY(250*1000); /* 1/4 second */
bus_space_write_2(sc->sc_iot, sc->sc_ioh,
WI_PCI_COR, WI_COR_CLEAR);
DELAY(500*1000); /* 1/2 second */
/* wait 2 seconds for firmware to complete initialization. */
for (i = 200000; i--; DELAY(10))
if (!(CSR_READ_2(sc, WI_COMMAND) & WI_CMD_BUSY))
break;
if (i < 0) {
printf("%s: PCI reset timed out\n", device_xname(&sc->sc_dev));
} else if (sc->sc_if.if_flags & IFF_DEBUG) {
usecs = (200000 - i) * 10;
secs = usecs / 1000000;
usecs %= 1000000;
printf("%s: PCI reset in %d.%06d seconds\n",
device_xname(&sc->sc_dev), secs, usecs);
}
return;
}
static const struct wi_pci_product *
wi_pci_lookup(struct pci_attach_args *pa)
{
const struct wi_pci_product *wpp;
for (wpp = wi_pci_products; wpp->wpp_vendor != 0; wpp++) {
if (PCI_VENDOR(pa->pa_id) == wpp->wpp_vendor &&
PCI_PRODUCT(pa->pa_id) == wpp->wpp_product)
return (wpp);
}
return (NULL);
}
static int
wi_pci_match(struct device *parent, struct cfdata *match,
void *aux)
{
struct pci_attach_args *pa = aux;
if (wi_pci_lookup(pa) != NULL)
return (1);
return (0);
}
static void
wi_pci_attach(struct device *parent, struct device *self, void *aux)
{
struct wi_pci_softc *psc = (struct wi_pci_softc *)self;
struct wi_softc *sc = &psc->psc_wi;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
const char *intrstr;
const struct wi_pci_product *wpp;
pci_intr_handle_t ih;
bus_space_tag_t memt, iot, plxt, tmdt;
bus_space_handle_t memh, ioh, plxh, tmdh;
psc->psc_pc = pc;
psc->psc_pcitag = pa->pa_tag;
wpp = wi_pci_lookup(pa);
#ifdef DIAGNOSTIC
if (wpp == NULL) {
printf("\n");
panic("wi_pci_attach: impossible");
}
#endif
switch (wpp->wpp_chip) {
case CHIP_PLX_OTHER:
case CHIP_PLX_9052:
/* Map memory and I/O registers. */
if (pci_mapreg_map(pa, WI_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0,
&memt, &memh, NULL, NULL) != 0) {
printf(": can't map mem space\n");
return;
}
if (pci_mapreg_map(pa, WI_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, NULL) != 0) {
printf(": can't map I/O space\n");
return;
}
if (wpp->wpp_chip == CHIP_PLX_OTHER) {
/* The PLX 9052 doesn't have IO at 0x14. Perhaps
other chips have, so we'll make this conditional. */
if (pci_mapreg_map(pa, WI_PCI_PLX_LOIO,
PCI_MAPREG_TYPE_IO, 0, &plxt,
&plxh, NULL, NULL) != 0) {
printf(": can't map PLX\n");
return;
}
}
break;
case CHIP_TMD_7160:
/* Used instead of PLX on at least one revision of
* the National Datacomm Corporation NCP130. Values
* for registers acquired from OpenBSD, which in
* turn got them from a Linux driver.
*/
/* Map COR and I/O registers. */
if (pci_mapreg_map(pa, WI_TMD_COR, PCI_MAPREG_TYPE_IO, 0,
&tmdt, &tmdh, NULL, NULL) != 0) {
printf(": can't map TMD\n");
return;
}
if (pci_mapreg_map(pa, WI_TMD_IO, PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, NULL) != 0) {
printf(": can't map I/O space\n");
return;
}
break;
default:
if (pci_mapreg_map(pa, WI_PCI_CBMA,
PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT,
0, &iot, &ioh, NULL, NULL) != 0) {
printf(": can't map mem space\n");
return;
}
memt = iot;
memh = ioh;
sc->sc_pci = 1;
break;
}
{
char devinfo[256];
pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo, sizeof(devinfo));
printf(": %s (rev. 0x%02x)\n", devinfo,
PCI_REVISION(pa->pa_class));
}
sc->sc_enabled = 1;
sc->sc_enable = wi_pci_enable;
sc->sc_disable = wi_pci_disable;
sc->sc_iot = iot;
sc->sc_ioh = ioh;
/* Make sure interrupts are disabled. */
CSR_WRITE_2(sc, WI_INT_EN, 0);
CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF);
if (wpp->wpp_chip == CHIP_PLX_OTHER) {
uint32_t command;
#define WI_LOCAL_INTCSR 0x4c
#define WI_LOCAL_INTEN 0x40 /* poke this into INTCSR */
command = bus_space_read_4(plxt, plxh, WI_LOCAL_INTCSR);
command |= WI_LOCAL_INTEN;
bus_space_write_4(plxt, plxh, WI_LOCAL_INTCSR, command);
}
/* Map and establish the interrupt. */
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(self, "couldn't map interrupt\n");
return;
}
intrstr = pci_intr_string(pc, ih);
psc->psc_ih = ih;
sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, wi_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(self, "couldn't establish interrupt");
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
return;
}
printf("%s: interrupting at %s\n", device_xname(self), intrstr);
switch (wpp->wpp_chip) {
case CHIP_PLX_OTHER:
case CHIP_PLX_9052:
/*
* Setup the PLX chip for level interrupts and config index 1
* XXX - should really reset the PLX chip too.
*/
bus_space_write_1(memt, memh,
WI_PLX_COR_OFFSET, WI_PLX_COR_VALUE);
break;
case CHIP_TMD_7160:
/* Enable I/O mode and level interrupts on the embedded
* card. The card's COR is the first byte of BAR 0.
*/
bus_space_write_1(tmdt, tmdh, 0, WI_COR_IOMODE);
break;
default:
/* reset HFA3842 MAC core */
wi_pci_reset(sc);
break;
}
printf("%s:", device_xname(self));
if (wi_attach(sc, 0) != 0) {
aprint_error_dev(self, "failed to attach controller\n");
pci_intr_disestablish(pa->pa_pc, sc->sc_ih);
return;
}
if (!wpp->wpp_chip)
sc->sc_reset = wi_pci_reset;
if (!pmf_device_register(self, NULL, NULL))
aprint_error_dev(self, "couldn't establish power handler\n");
else
pmf_class_network_register(self, &sc->sc_if);
}