NetBSD-5.0.2/sys/net80211/CHANGES
***
*** Summary of changes between 2005-05-18 and 2005-11-01.
***
*** % setenv TZ UTC
*** % cvs -d freebsdanoncvs@anoncvs.freebsd.org:/home/ncvs co src
*** % cd src/sys/net80211/
*** % cvs2cl --follow trunk --hide-filenames --no-indent --no-wrap \
*** -f CHANGES -l '-d 2005-05-18<=2005-11-01'
***
2005-08-30 14:27 avatar
Properly set ic_curchan before calling back to device driver to do channel
switching(ifconfig devX channel Y). This fix should make channel changing
works again in monitor mode.
Submitted by: sam
X-MFC-With: other ic_curchan changes
2005-08-13 17:50 sam
revert 1.64: we cannot use the channel characteristics to decide when to
do 11g erp sta accounting because b/g channels show up as false positives
when operating in 11b.
Noticed by: Michal Mertl
2005-08-13 17:31 sam
Extend acl support to pass ioctl requests through and use this to
add support for getting the current policy setting and collecting
the list of mac addresses in the acl table.
Submitted by: Michal Mertl (original version)
MFC after: 2 weeks
2005-08-10 17:42 sam
Don't use ic_curmode to decide when to do 11g station accounting,
use the station channel properties. Fixes assert failure/bogus
operation when an ap is operating in 11a and has associated stations
then switches to 11g.
Noticed by: Michal Mertl
Reviewed by: avatar
MFC after: 2 weeks
2005-08-10 16:22 sam
Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
2005-08-09 10:19 rwatson
Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
2005-08-08 18:46 sam
Split crypto tx+rx key indices and add a key index -> node mapping table:
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
2005-08-08 05:49 sam
use ieee80211_iterate_nodes to retrieve station data; the previous
code walked the list w/o locking
MFC after: 1 week
2005-08-08 03:30 sam
Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
2005-08-06 04:57 sam
fix debug msg typo
MFC after: 3 days
2005-08-06 04:56 sam
Fix handling of frames sent prior to a station being authorized
when operating in ap mode. Previously we allocated a node from the
station table, sent the frame (using the node), then released the
reference that "held the frame in the table". But while the frame
was in flight the node might be reclaimed which could lead to
problems. The solution is to add an ieee80211_tmp_node routine
that crafts a node that does exist in a table and so isn't ever
reclaimed; it exists only so long as the associated frame is in flight.
MFC after: 5 days
2005-07-31 06:12 sam
close a race between reclaiming a node when a station is inactive
and sending the null data frame used to probe inactive stations
MFC after: 5 days
2005-07-27 04:41 sam
when bridging internally bypass the bss node as traffic to it
must follow the normal input path
Submitted by: Michal Mertl
MFC after: 5 days
2005-07-27 02:53 sam
bandaid ni_fails handling so ap's with association failures are
reconsidered after a bit; a proper fix involves more changes to
the scanning infrastructure
Reviewed by: avatar, David Young
MFC after: 5 days
2005-07-23 00:16 sam
the AREF flag is only meaningful in ap mode; adhoc neighbors now
are timed out of the sta/neighbor table
2005-07-22 23:25 sam
o move inactivity-related debug msgs under IEEE80211_MSG_INACT
o probe inactive neighbors in adhoc mode (they don't have an
association id so previously were being timed out)
MFC after: 3 days
2005-07-22 21:11 sam
split xmit of probe request frame out into a separate routine that
takes explicit parameters; this will be needed when scanning is
decoupled from the state machine to do bg scanning
MFC after: 3 days
2005-07-22 20:48 sam
split 802.11 frame xmit setup code into ieee80211_send_setup
MFC after: 3 days
2005-07-22 17:57 sam
simplify ic_newassoc callback
MFC after: 3 days
2005-07-22 17:54 sam
simplify ieee80211_ibss_merge api
MFC after: 3 days
2005-07-22 17:50 sam
add stats we know we'll need soon and some spare fields for future expansion
MFC after: 3 days
2005-07-22 17:45 sam
simplify tim callback api
MFC after: 3 days
2005-07-22 17:42 sam
don't include 802.3 header in min frame length calculation as it may
not be present for a frag; fixes problem with small (fragmented) frames
being dropped
Obtained from: Atheros
MFC after: 3 days
2005-07-22 17:36 sam
simplify ieee80211_node_authorize and ieee80211_node_unauthorize api's
MFC after: 3 days
2005-07-22 17:31 sam
simplifiy ieee80211_send_nulldata api
MFC after: 3 days
2005-07-22 17:29 sam
simplify rate set api's by removing ic parameter (implicit in node reference)
MFC after: 3 days
2005-07-22 17:21 sam
reject association requests with a wpa/rsn ie when wpa/rsn is not
configured on the ap; previously we either ignored the ie or (possibly)
failed an assertion
Obtained from: Atheros
MFC after: 3 days
2005-07-22 17:16 sam
missed one in last commit; add device name to discard msgs
2005-07-22 17:13 sam
include device name in discard msgs
2005-07-22 17:12 sam
add diag msgs for frames discarded because the direction field is wrong
2005-07-22 17:08 sam
split data frame delivery out to a new function ieee80211_deliver_data
2005-07-22 17:00 sam
o add IEEE80211_IOC_FRAGTHRESHOLD for getting+setting the
tx fragmentation threshold
o fix bounds checking on IEEE80211_IOC_RTSTHRESHOLD
MFC after: 3 days
2005-07-22 16:55 sam
o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h
2005-07-22 16:50 sam
diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 16:37 sam
add flags missed in last merge
2005-07-22 16:36 sam
Diff reduction against p4:
o add ic_flags_ext for eventual extention of ic_flags
o define/reserve flag+capabilities bits for superg,
bg scan, and roaming support
o refactor debug msg macros
MFC after: 3 days
2005-07-22 05:17 sam
send a response when an auth request is denied due to an acl;
might be better to silently ignore the frame but this way we
give stations a chance of figuring out what's wrong
2005-07-22 05:15 sam
remove excess whitespace
2005-07-22 04:55 sam
use IF_HANDOFF when bridging frames internally so if_start gets
called; fixes communication between associated sta's
MFC after: 3 days
2005-07-11 03:06 sam
Handle encrypt of arbitarily fragmented mbuf chains: previously
we bailed if we couldn't collect the 16-bytes of data required
for an aes block cipher in 2 mbufs; now we deal with it. While
here make space accounting signed so a sanity check does the
right thing for malformed mbuf chains.
Approved by: re (scottl)
2005-07-11 03:00 sam
nuke assert that duplicates real check
Reviewed by: avatar
Approved by: re (scottl)
2005-07-09 23:15 sam
Change default key allocation method to do the right thing for
legacy parts (i.e. those that have 4 global key slots). We
blindly assign unicast keys to key slot 0. Devices that need
alternate allocation logic must override this method.
Reviewed by: avatar
Approved by: re (scottl)
2005-07-08 22:49 sam
correct check for high priority wme traffic
Noticed by: Ralf Assmann
Reviewed by: apatti
Approved by: re (scottl)
2005-07-08 16:36 sam
fix another instance of the MORE_DATA bit handling for frames on the
power save queue (missed in previous commit)
Submitted by: Bruno Randolf
Approved by: re (scottl)
2005-07-06 15:38 sam
add "pureg" mode for ap operation: reject association requests from
11b-only stations when operating in 11g
Reviewed by: avatar
Approved by: re (scottl)
2005-07-06 01:55 sam
Fix handling of data frames queued for a station in power save mode:
don't mark the MORE_DATA bit when taking it off the ps queue, there's
no 802.11 header then; we must wait to do this at encap time so
mark the mbuf instead.
Reviewed by: avatar
Approved by: re (scottl)
Obtained from: Atheros
2005-07-06 01:51 sam
Fix race condition in handling node reference counts for authenticating
stations in ap mode. Track when a node's first auth frame is
received and use this to decide whether or not to bump the refcnt.
This insures we only ever bump the refcnt once.
Reviewed by: avatar
Approved by: re (scottl)
2005-07-06 01:31 avatar
Only update the scan entry state based on newly received frames.
This fixes duplicative BSS entries(memory leaks as well) listed in
"ifconfig dev list scan" when a station fails to associate with an AP.
Reviewed by: sam
Approved by: re (scottl)
2005-07-05 18:05 sam
remove auto-add of IEEE80211_KEY_GROUP; all the apps that need to
set it have been fixed
Reviewed by: avatar
Approved by: re (scottl)
2005-07-05 17:35 sam
o when setting a wpa key, hold a ref on the bss node;
fixes a ref cnt leak
o make unicast key handling on delete identical to set
o change legacy wep key api to reset the 802.11 state
machine for backwards compatibility
Reviewed by: avatar
Approved by: re (scottl)
2005-07-04 01:29 sam
when operating in ap mode, explicitly drop associated/authenticated
stations when transitioning to INIT state (e.g. as a result of
changing state at the 802.11 level)
Approved by: re (scottl)
2005-06-13 21:01 sam
revert 1.53; it breaks ibss merge
Noticed by: Bruno Randolf
Approved by: re (dwhite)
2005-06-10 21:30 sam
don't look at the wme ie in a beacon unless we negotiated use
2005-06-10 16:49 brooks
Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
2005-06-10 16:14 sam
validate the bssid for non-data frames too when operating in
adhoc/ahdemo/hostap modes
2005-06-10 16:11 sam
o fix wpa w/ wme: don't strip the QoS header on recv as tkip requires
it; instead pass the space occupied by the header down into the
crypto modules (except in the demic case which needs it only when
doing int in s/w)
o while here fix defrag to strip the header from 2nd and later frames
o teach decap code how to handle 4-address frames
2005-06-10 05:04 sam
mark stations authorized during recv processing instead of doing it
as a side effect of sending an auth success frame; sending mgmt
frames should not have side effects
2005-06-10 04:42 sam
move AID implementation defines from the protocol definitions to
where they are used
2005-06-10 04:37 sam
accept diassoc frame in ASSOC state
2005-06-10 01:48 sam
pull some debug msgs up so they're seen more often
2005-06-10 01:47 sam
kick the state machine when we receive failure notice from an ap (when
operating in sta mode); this speeds up the state machine, previously
we were acting on a timeout
2005-06-10 01:43 sam
discard open auth requests in adhoc mode
2005-06-10 01:41 sam
reject open auth requests when shared key auth is configured
Obtained from: Atheros
2005-06-10 01:40 sam
add ieee80211_send_error to encapsulate an idiom
2005-06-10 01:38 sam
o always check if ic_set_tim is !NULL before using it
o add missing call to clear tim after flushing ps q
2005-06-10 01:35 sam
mark state for protection only when operating in 11g
2005-06-10 01:33 sam
don't reject station based on the PRIVACY bit in the capabilities;
the 802.11 spec says not to
Obtained from: Atheros
2005-06-10 01:31 sam
correct checks for rate set compatibility
2005-06-10 01:29 sam
record tstamp from beacons received in station mode when associated;
this is needed by drivers that want to resync their timers based on
the tsf of the last recv'd beacon frame
2005-06-09 04:05 sam
o collect dtim period+count from beacons in station mode so drivers
can better program beacon timers
o leave placeholder in com structure for future ap/adhoc mode tim support
Reviewed by: avatar
2005-06-07 23:37 sam
Change the MLME ASSOCIATE ioctl to accept either a ssid, a bssid,
or a bssid+ssid. This is needed for later versions of wpa_supplicant
and for forthcoming addons to wpa_supplicant.
Note this is an api change and applications must be rebuilt.
2005-06-07 23:31 sam
Don't clock the state machine in various cases when roaming is set
to manual; this helps keep wpa_supplicant in sync.
2005-06-07 00:08 sam
WPA/802.11i interoperability fixes:
o only include capabilities word in the WPA ie when non-zero and
not preauth
o always include the capabilities in the RSN ie
Obtained from: Atheros
2005-06-06 04:04 sam
add force flag to enmic/demic crypto api for use in xmit fragmentation
and h/w mic verification
Reviewed by: avatar