NetBSD-5.0.2/sys/opencrypto/cryptodev.h
/* $NetBSD: cryptodev.h,v 1.14.10.1 2008/11/20 03:22:38 snj Exp $ */
/* $FreeBSD: src/sys/opencrypto/cryptodev.h,v 1.2.2.6 2003/07/02 17:04:50 sam Exp $ */
/* $OpenBSD: cryptodev.h,v 1.33 2002/07/17 23:52:39 art Exp $ */
/*-
* Copyright (c) 2008 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Coyote Point Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu)
*
* This code was written by Angelos D. Keromytis in Athens, Greece, in
* February 2000. Network Security Technologies Inc. (NSTI) kindly
* supported the development of this code.
*
* Copyright (c) 2000 Angelos D. Keromytis
*
* Permission to use, copy, and modify this software with or without fee
* is hereby granted, provided that this entire notice is included in
* all source code copies of any software which is or includes a copy or
* modification of this software.
*
* THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY
* REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
* MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
* PURPOSE.
*
* Copyright (c) 2001 Theo de Raadt
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Effort sponsored in part by the Defense Advanced Research Projects
* Agency (DARPA) and Air Force Research Laboratory, Air Force
* Materiel Command, USAF, under agreement number F30602-01-2-0537.
*
*/
#ifndef _CRYPTO_CRYPTO_H_
#define _CRYPTO_CRYPTO_H_
#include <sys/ioccom.h>
/* Some initial values */
#define CRYPTO_DRIVERS_INITIAL 4
#define CRYPTO_SW_SESSIONS 32
/* HMAC values */
#define HMAC_BLOCK_LEN 64
#define HMAC_IPAD_VAL 0x36
#define HMAC_OPAD_VAL 0x5C
/* Encryption algorithm block sizes */
#define DES_BLOCK_LEN 8
#define DES3_BLOCK_LEN 8
#define BLOWFISH_BLOCK_LEN 8
#define SKIPJACK_BLOCK_LEN 8
#define CAST128_BLOCK_LEN 8
#define RIJNDAEL128_BLOCK_LEN 16
#define EALG_MAX_BLOCK_LEN 16 /* Keep this updated */
/* Maximum hash algorithm result length */
#define AALG_MAX_RESULT_LEN 64 /* Keep this updated */
#define CRYPTO_ALGORITHM_MIN 1
#define CRYPTO_DES_CBC 1
#define CRYPTO_3DES_CBC 2
#define CRYPTO_BLF_CBC 3
#define CRYPTO_CAST_CBC 4
#define CRYPTO_SKIPJACK_CBC 5
#define CRYPTO_MD5_HMAC 6
#define CRYPTO_SHA1_HMAC 7
#define CRYPTO_RIPEMD160_HMAC 8
#define CRYPTO_MD5_KPDK 9
#define CRYPTO_SHA1_KPDK 10
#define CRYPTO_RIJNDAEL128_CBC 11 /* 128 bit blocksize */
#define CRYPTO_AES_CBC 11 /* 128 bit blocksize -- the same as above */
#define CRYPTO_ARC4 12
#define CRYPTO_MD5 13
#define CRYPTO_SHA1 14
#define CRYPTO_SHA2_HMAC 15
#define CRYPTO_NULL_HMAC 16
#define CRYPTO_NULL_CBC 17
#define CRYPTO_DEFLATE_COMP 18 /* Deflate compression algorithm */
#define CRYPTO_MD5_HMAC_96 19
#define CRYPTO_SHA1_HMAC_96 20
#define CRYPTO_RIPEMD160_HMAC_96 21
#define CRYPTO_ALGORITHM_MAX 22 /* Keep updated - see below */
/* Algorithm flags */
#define CRYPTO_ALG_FLAG_SUPPORTED 0x01 /* Algorithm is supported */
#define CRYPTO_ALG_FLAG_RNG_ENABLE 0x02 /* Has HW RNG for DH/DSA */
#define CRYPTO_ALG_FLAG_DSA_SHA 0x04 /* Can do SHA on msg */
struct session_op {
u_int32_t cipher; /* ie. CRYPTO_DES_CBC */
u_int32_t mac; /* ie. CRYPTO_MD5_HMAC */
u_int32_t keylen; /* cipher key */
void * key;
int mackeylen; /* mac key */
void * mackey;
u_int32_t ses; /* returns: session # */
};
/* to support multiple session creation */
struct session_n_op {
u_int32_t cipher; /* ie. CRYPTO_DES_CBC */
u_int32_t mac; /* ie. CRYPTO_MD5_HMAC */
u_int32_t keylen; /* cipher key */
void * key;
int mackeylen; /* mac key */
void * mackey;
u_int32_t ses; /* returns: session # */
int status;
};
struct crypt_op {
u_int32_t ses;
u_int16_t op; /* i.e. COP_ENCRYPT */
#define COP_ENCRYPT 1
#define COP_DECRYPT 2
u_int16_t flags;
#define COP_F_BATCH 0x0008 /* Dispatch as quickly as possible */
u_int len;
void * src, *dst; /* become iov[] inside kernel */
void * mac; /* must be big enough for chosen MAC */
void * iv;
};
/* to support multiple session creation */
/*
*
* The reqid field is filled when the operation has
* been accepted and started, and can be used to later retrieve
* the operation results via CIOCNCRYPTRET or identify the
* request in the completion list returned by CIOCNCRYPTRETM.
*
* The opaque pointer can be set arbitrarily by the user
* and it is passed back in the crypt_result structure
* when the request completes. This field can be used for example
* to track context for the request and avoid lookups in the
* user application.
*/
struct crypt_n_op {
u_int32_t ses;
u_int16_t op; /* i.e. COP_ENCRYPT */
#define COP_ENCRYPT 1
#define COP_DECRYPT 2
u_int16_t flags;
#define COP_F_BATCH 0x0008 /* Dispatch as quickly as possible */
u_int len;
u_int32_t reqid; /* request id */
int status; /* status of request -accepted or not */
void *opaque; /* opaque pointer returned to user */
u_int32_t keylen; /* cipher key - optional */
void * key;
u_int32_t mackeylen; /* also optional */
void * mackey;
void * src, *dst; /* become iov[] inside kernel */
void * mac; /* must be big enough for chosen MAC */
void * iv;
};
/* CIOCNCRYPTM ioctl argument, supporting one or more asynchronous
* crypt_n_op operations.
* Each crypt_n_op will receive a request id which can be used to check its
* status via CIOCNCRYPTRET, or to watch for its completion in the list
* obtained via CIOCNCRYPTRETM.
*/
struct crypt_mop {
size_t count; /* how many */
struct crypt_n_op * reqs; /* where to get them */
};
struct crypt_sfop {
size_t count;
u_int32_t *sesid;
};
struct crypt_sgop {
size_t count;
struct session_n_op * sessions;
};
#define CRYPTO_MAX_MAC_LEN 20
/* bignum parameter, in packed bytes, ... */
struct crparam {
void * crp_p;
u_int crp_nbits;
};
#define CRK_MAXPARAM 8
struct crypt_kop {
u_int crk_op; /* ie. CRK_MOD_EXP or other */
u_int crk_status; /* return status */
u_short crk_iparams; /* # of input parameters */
u_short crk_oparams; /* # of output parameters */
u_int crk_pad1;
struct crparam crk_param[CRK_MAXPARAM];
};
/*
* Used with the CIOCNFKEYM ioctl.
*
* This structure allows the OCF to return a request id
* for each of the kop operations specified in the CIOCNFKEYM call.
*
* The crk_opaque pointer can be arbitrarily set by the user
* and it is passed back in the crypt_result structure
* when the request completes. This field can be used for example
* to track context for the request and avoid lookups in the
* user application.
*/
struct crypt_n_kop {
u_int crk_op; /* ie. CRK_MOD_EXP or other */
u_int crk_status; /* return status */
u_short crk_iparams; /* # of input parameters */
u_short crk_oparams; /* # of output parameters */
u_int32_t crk_reqid; /* request id */
struct crparam crk_param[CRK_MAXPARAM];
void *crk_opaque; /* opaque pointer returned to user */
};
struct crypt_mkop {
size_t count; /* how many */
struct crypt_n_kop * reqs; /* where to get them */
};
/* Asynchronous key or crypto result.
* Note that the status will be set in the crypt_result structure,
* not in the original crypt_kop structure (crk_status).
*/
struct crypt_result {
u_int32_t reqid; /* request id */
u_int32_t status; /* status of request: 0 if successful */
void * opaque; /* Opaque pointer from the user, passed along */
};
struct cryptret {
size_t count; /* space for how many */
struct crypt_result * results; /* where to put them */
};
/* Assymetric key operations */
#define CRK_ALGORITM_MIN 0
#define CRK_MOD_EXP 0
#define CRK_MOD_EXP_CRT 1
#define CRK_DSA_SIGN 2
#define CRK_DSA_VERIFY 3
#define CRK_DH_COMPUTE_KEY 4
#define CRK_MOD_ADD 5
#define CRK_MOD_ADDINV 6
#define CRK_MOD_SUB 7
#define CRK_MOD_MULT 8
#define CRK_MOD_MULTINV 9
#define CRK_MOD 10
#define CRK_ALGORITHM_MAX 10 /* Keep updated - see below */
#define CRF_MOD_EXP (1 << CRK_MOD_EXP)
#define CRF_MOD_EXP_CRT (1 << CRK_MOD_EXP_CRT)
#define CRF_DSA_SIGN (1 << CRK_DSA_SIGN)
#define CRF_DSA_VERIFY (1 << CRK_DSA_VERIFY)
#define CRF_DH_COMPUTE_KEY (1 << CRK_DH_COMPUTE_KEY)
#define CRF_MOD_ADD (1 << CRK_MOD_ADD)
#define CRF_MOD_ADDINV (1 << CRK_MOD_ADDINV)
#define CRF_MOD_SUB (1 << CRK_MOD_SUB)
#define CRF_MOD_MULT (1 << CRK_MOD_MULT)
#define CRF_MOD_MULTINV (1 << CRK_MOD_MULTINV)
#define CRF_MOD (1 << CRK_MOD)
/*
* A large comment here once held descriptions of the ioctl
* requests implemented by the device. This text has been moved
* to the crypto(4) manual page and, later, removed from this file
* as it was always a step behind the times.
*/
/*
* done against open of /dev/crypto, to get a cloned descriptor.
* Please use F_SETFD against the cloned descriptor. But this ioctl
* is obsolete (the device now clones): please, just don't use it.
*/
#define CRIOGET _IOWR('c', 100, u_int32_t)
/* the following are done against the cloned descriptor */
#define CIOCGSESSION _IOWR('c', 101, struct session_op)
#define CIOCFSESSION _IOW('c', 102, u_int32_t)
#define CIOCCRYPT _IOWR('c', 103, struct crypt_op)
#define CIOCKEY _IOWR('c', 104, struct crypt_kop)
#define CIOCNGSESSION _IOWR('c', 106, struct crypt_sgop)
#define CIOCNCRYPTM _IOWR('c', 107, struct crypt_mop)
#define CIOCNFKEYM _IOWR('c', 108, struct crypt_mkop)
#define CIOCNFSESSION _IOW('c', 109, struct crypt_sfop)
#define CIOCNCRYPTRETM _IOWR('c', 110, struct cryptret)
#define CIOCNCRYPTRET _IOWR('c', 111, struct crypt_result)
#define CIOCASYMFEAT _IOR('c', 105, u_int32_t)
struct cryptotstat {
struct timespec acc; /* total accumulated time */
struct timespec min; /* max time */
struct timespec max; /* max time */
u_int32_t count; /* number of observations */
};
struct cryptostats {
u_int32_t cs_ops; /* symmetric crypto ops submitted */
u_int32_t cs_errs; /* symmetric crypto ops that failed */
u_int32_t cs_kops; /* asymetric/key ops submitted */
u_int32_t cs_kerrs; /* asymetric/key ops that failed */
u_int32_t cs_intrs; /* crypto swi thread activations */
u_int32_t cs_rets; /* crypto return thread activations */
u_int32_t cs_blocks; /* symmetric op driver block */
u_int32_t cs_kblocks; /* symmetric op driver block */
/*
* When CRYPTO_TIMING is defined at compile time and the
* sysctl debug.crypto is set to 1, the crypto system will
* accumulate statistics about how long it takes to process
* crypto requests at various points during processing.
*/
struct cryptotstat cs_invoke; /* crypto_dipsatch -> crypto_invoke */
struct cryptotstat cs_done; /* crypto_invoke -> crypto_done */
struct cryptotstat cs_cb; /* crypto_done -> callback */
struct cryptotstat cs_finis; /* callback -> callback return */
};
#ifdef _KERNEL
/* Standard initialization structure beginning */
struct cryptoini {
int cri_alg; /* Algorithm to use */
int cri_klen; /* Key length, in bits */
int cri_rnd; /* Algorithm rounds, where relevant */
char *cri_key; /* key to use */
u_int8_t cri_iv[EALG_MAX_BLOCK_LEN]; /* IV to use */
struct cryptoini *cri_next;
};
/* Describe boundaries of a single crypto operation */
struct cryptodesc {
int crd_skip; /* How many bytes to ignore from start */
int crd_len; /* How many bytes to process */
int crd_inject; /* Where to inject results, if applicable */
int crd_flags;
#define CRD_F_ENCRYPT 0x01 /* Set when doing encryption */
#define CRD_F_IV_PRESENT 0x02 /* When encrypting, IV is already in
place, so don't copy. */
#define CRD_F_IV_EXPLICIT 0x04 /* IV explicitly provided */
#define CRD_F_DSA_SHA_NEEDED 0x08 /* Compute SHA-1 of buffer for DSA */
#define CRD_F_COMP 0x0f /* Set when doing compression */
struct cryptoini CRD_INI; /* Initialization/context data */
#define crd_iv CRD_INI.cri_iv
#define crd_key CRD_INI.cri_key
#define crd_rnd CRD_INI.cri_rnd
#define crd_alg CRD_INI.cri_alg
#define crd_klen CRD_INI.cri_klen
struct cryptodesc *crd_next;
};
/* Structure describing complete operation */
struct cryptop {
union {
TAILQ_ENTRY(cryptop) crp_tnext;
SLIST_ENTRY(cryptop) crp_lnext;
} crp_qun;
#define crp_next crp_qun.crp_tnext /* XXX compat */
u_int64_t crp_sid; /* Session ID */
u_int32_t crp_reqid; /* request id */
void * crp_usropaque; /* Opaque pointer from user, passed along */
int crp_ilen; /* Input data total length */
int crp_olen; /* Result total length */
int crp_etype; /*
* Error type (zero means no error).
* All error codes except EAGAIN
* indicate possible data corruption (as in,
* the data have been touched). On all
* errors, the crp_sid may have changed
* (reset to a new one), so the caller
* should always check and use the new
* value on future requests.
*/
int crp_flags; /* Note: must hold mutext to modify */
#define CRYPTO_F_IMBUF 0x0001 /* Input/output are mbuf chains */
#define CRYPTO_F_IOV 0x0002 /* Input/output are uio */
#define CRYPTO_F_REL 0x0004 /* Must return data in same place */
#define CRYPTO_F_BATCH 0x0008 /* Batch op if possible possible */
#define CRYPTO_F_CBIMM 0x0010 /* Do callback immediately */
#define CRYPTO_F_DONE 0x0020 /* Operation completed */
#define CRYPTO_F_CBIFSYNC 0x0040 /* Do CBIMM if op is synchronous */
#define CRYPTO_F_ONRETQ 0x0080 /* Request is on return queue */
#define CRYPTO_F_USER 0x0100 /* Request is in user context */
void * crp_buf; /* Data to be processed */
void * crp_opaque; /* Opaque pointer, passed along */
struct cryptodesc *crp_desc; /* Linked list of processing descriptors */
int (*crp_callback)(struct cryptop *); /* Callback function */
void * crp_mac;
struct timespec crp_tstamp; /* performance time stamp */
kcondvar_t crp_cv;
struct fcrypt *fcrp;
void * dst;
void * mac;
u_int len;
u_char tmp_iv[EALG_MAX_BLOCK_LEN];
u_char tmp_mac[CRYPTO_MAX_MAC_LEN];
struct iovec iovec[1];
struct uio uio;
};
#define CRYPTO_BUF_CONTIG 0x0
#define CRYPTO_BUF_IOV 0x1
#define CRYPTO_BUF_MBUF 0x2
#define CRYPTO_OP_DECRYPT 0x0
#define CRYPTO_OP_ENCRYPT 0x1
/*
* Hints passed to process methods.
*/
#define CRYPTO_HINT_MORE 0x1 /* more ops coming shortly */
struct cryptkop {
union {
TAILQ_ENTRY(cryptkop) krp_tnext;
SLIST_ENTRY(cryptkop) krp_lnext;
} krp_qun;
#define krp_next krp_qun.krp_tnext /* XXX compat */
u_int32_t krp_reqid; /* request id */
void * krp_usropaque; /* Opaque pointer from user, passed along */
u_int krp_op; /* ie. CRK_MOD_EXP or other */
u_int krp_status; /* return status */
u_short krp_iparams; /* # of input parameters */
u_short krp_oparams; /* # of output parameters */
u_int32_t krp_hid;
struct crparam krp_param[CRK_MAXPARAM]; /* kvm */
int (*krp_callback)(struct cryptkop *);
int krp_flags; /* same values as crp_flags */
kcondvar_t krp_cv;
struct fcrypt *fcrp;
struct crparam crk_param[CRK_MAXPARAM];
};
/* Crypto capabilities structure */
struct cryptocap {
u_int32_t cc_sessions;
/*
* Largest possible operator length (in bits) for each type of
* encryption algorithm.
*/
u_int16_t cc_max_op_len[CRYPTO_ALGORITHM_MAX + 1];
u_int8_t cc_alg[CRYPTO_ALGORITHM_MAX + 1];
u_int8_t cc_kalg[CRK_ALGORITHM_MAX + 1];
u_int8_t cc_flags;
u_int8_t cc_qblocked; /* symmetric q blocked */
u_int8_t cc_kqblocked; /* asymmetric q blocked */
#define CRYPTOCAP_F_CLEANUP 0x01 /* needs resource cleanup */
#define CRYPTOCAP_F_SOFTWARE 0x02 /* software implementation */
#define CRYPTOCAP_F_SYNC 0x04 /* operates synchronously */
void *cc_arg; /* callback argument */
int (*cc_newsession)(void*, u_int32_t*, struct cryptoini*);
int (*cc_process) (void*, struct cryptop *, int);
int (*cc_freesession) (void*, u_int64_t);
void *cc_karg; /* callback argument */
int (*cc_kprocess) (void*, struct cryptkop *, int);
};
/*
* Session ids are 64 bits. The lower 32 bits contain a "local id" which
* is a driver-private session identifier. The upper 32 bits contain a
* "hardware id" used by the core crypto code to identify the driver and
* a copy of the driver's capabilities that can be used by client code to
* optimize operation.
*/
#define CRYPTO_SESID2HID(_sid) (((_sid) >> 32) & 0xffffff)
#define CRYPTO_SESID2CAPS(_sid) (((_sid) >> 56) & 0xff)
#define CRYPTO_SESID2LID(_sid) (((u_int32_t) (_sid)) & 0xffffffff)
MALLOC_DECLARE(M_CRYPTO_DATA);
extern int crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int hard);
extern int crypto_freesession(u_int64_t sid);
extern int32_t crypto_get_driverid(u_int32_t flags);
extern int crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen,
u_int32_t flags,
int (*newses)(void*, u_int32_t*, struct cryptoini*),
int (*freeses)(void*, u_int64_t),
int (*process)(void*, struct cryptop *, int),
void *arg);
extern int crypto_kregister(u_int32_t, int, u_int32_t,
int (*)(void*, struct cryptkop *, int),
void *arg);
extern int crypto_unregister(u_int32_t driverid, int alg);
extern int crypto_unregister_all(u_int32_t driverid);
extern int crypto_dispatch(struct cryptop *crp);
extern int crypto_kdispatch(struct cryptkop *);
#define CRYPTO_SYMQ 0x1
#define CRYPTO_ASYMQ 0x2
extern int crypto_unblock(u_int32_t, int);
extern void crypto_done(struct cryptop *crp);
extern void crypto_kdone(struct cryptkop *);
extern int crypto_getfeat(int *);
void cuio_copydata(struct uio *, int, int, void *);
void cuio_copyback(struct uio *, int, int, void *);
int cuio_apply(struct uio *, int, int,
int (*f)(void *, void *, unsigned int), void *);
extern int crypto_ret_q_remove(struct cryptop *);
extern int crypto_ret_kq_remove(struct cryptkop *);
extern void crypto_freereq(struct cryptop *crp);
extern struct cryptop *crypto_getreq(int num);
extern int crypto_usercrypto; /* userland may do crypto requests */
extern int crypto_userasymcrypto; /* userland may do asym crypto reqs */
extern int crypto_devallowsoft; /* only use hardware crypto */
/*
* Asymmetric operations are allocated in cryptodev.c but can be
* freed in crypto.c.
*/
extern struct pool cryptkop_pool;
/*
* Mutual exclusion and its unwelcome friends.
*/
extern kmutex_t crypto_mtx;
/*
* initialize the crypto framework subsystem (not the pseudo-device).
* This must be called very early in boot, so the framework is ready
* to handle registration requests when crpto hardware is autoconfigured.
* (This declaration doesnt really belong here but there's no header
* for the raw framework.)
*/
void crypto_init(void);
/*
* Crypto-related utility routines used mainly by drivers.
*
* XXX these don't really belong here; but for now they're
* kept apart from the rest of the system.
*/
struct mbuf;
struct mbuf *m_getptr(struct mbuf *, int, int *);
struct uio;
extern void cuio_copydata(struct uio* uio, int off, int len, void *cp);
extern void cuio_copyback(struct uio* uio, int off, int len, void *cp);
extern int cuio_getptr(struct uio *, int loc, int *off);
#ifdef CRYPTO_DEBUG /* yuck, netipsec defines these differently */
#ifndef DPRINTF
#define DPRINTF(a) uprintf a
#endif
#ifndef DCPRINTF
#define DCPRINTF(a) printf a
#endif
#else
#ifndef DPRINTF
#define DPRINTF(a)
#endif
#ifndef DCPRINTF
#define DCPRINTF(a)
#endif
#endif
#endif /* _KERNEL */
#endif /* _CRYPTO_CRYPTO_H_ */