NetBSD-5.0.2/usr.bin/gencat/gencat.1

.\" $NetBSD: gencat.1,v 1.10 2008/10/19 17:57:19 wiz Exp $
.\"
.\" Copyright (c) 2007 The NetBSD Foundation, Inc.
.\" All rights reserved.
.\"
.\" This code is derived from software contributed to The NetBSD Foundation
.\" by Kee Hinckley and Brian Ginsbach.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.\" Written by Kee Hinckley <nazgul@somewhere.com>
.\"
.Dd October 17, 2008
.Os
.Dt GENCAT 1
.Sh NAME
.Nm gencat
.Nd generates a Native Language Support (NLS) message catalog file
.Sh SYNOPSIS
.Nm
.Ar catfile
.Ar msgfile
.Op Ar msgfile ...
.Sh DESCRIPTION
The
.Nm
utility generates a formatted message catalog
.Ar catfile
from one or more message source text files
.Ar msgfile .
The file
.Ar catfile
is created if it does not already exist.
If
.Ar catfile
does exist, its messages are included in the new
.Ar catfile .
The new message text defined in
.Ar msgfile
replaces the old message text currently in
.Ar catfile
when the set and message numbers match.
.Pp
The generated message catalog contains message
strings that will be retrieved using the
.Xr catgets 3
library call.
These messages are dynamically loaded by the
Native Language Support (NLS) library at run time.
Error messages are grouped into sets, and a program can load a
particular set depending on which type, or language, of messages
is desired.
.Ss Message Text Source File Format
The message text source files are text files in the format described below.
Note that the fields of a message text source line are separated by
space or tab characters.
.\" XXX Required by POSIX; the code must be fixed first.  Above line should be
.\" a single space or tab character;
.\" any other space or tab characters are considered to be part of the
.\" field contents.
.Bl -tag -width 3n
.It Li $set Ar n comment
Determines the set identifier to be used for all subsequent messages
until the next
.Li $set
or end-of-file.
The
.Ar n
is the set identifier which is defined as a number in the range
.Bo 1 ,
.Dv NL_SETMAX Bc .
Set identifiers within a single source file need not be contiguous.
Any string following the set identifier is treated as a comment.
If no
.Li $set
directive is specified in a message text source file,
all messages will be located in the default message set
.Dv NL_SETD .
.It Li $delset Ar n comment
Removes message set
.Ar n
from the catalog.
The
.Ar n
is a set identifier in the range
.Bo 1 ,
.Dv NL_SETMAX Bc .
If a message set was created earlier in the
current file, or in a file previously read by the
.Nm
command, this directive will remove it.
Any string following the set identifier is treated as a comment.
.It Li $ Ar comment
A line beginning with
.Li $
followed by a space or tab character is treated as a comment.
.It Ar m message-text
A message line consists of a message identifier
.Ar m
in the range
.Bo 1 ,
.Dv NL_MSGMAX Bc
and the
.Ar message-text .
The
.Ar message-text
is read until the end of the line or a quote character
(if one is specified).
The
.Ar message-text
is stored in the message catalog with
the set identifier specified by the last
.Li $set
directive, and the message identifier
.Ar m .
.\" XXX Required by POSIX; the code must be fixed first.
.\" If the
.\" .Ar message-text
.\" is empty and there is a space or tab character
.\" following the message identifier,
.\" an empty string is stored in the message catalog.
If no
.Ar message-text
is provided,
.\" XXX Required by POSIX; the code must be fixed first.
.\" and if there is no space or tab character following the message
.\" identifier,
the message with the message identifier
.Ar m
in the current set is removed from the catalog.
Message identifiers need not be contiguous within a single set.
The length of
.Ar message-text
must be in the range
.Bo 0 ,
.Dv NL_TEXTMAX Bc .
.It Li $quote Ar c
Sets an optional quote character to be used around the
.Ar message-text .
The quote character
.Ar c
may be any character other than white space.
If this is specified, then messages must begin and end with the
quote character.
.\" XXX Remove next sentence when code is fixed for POSIX conformance.
This is useful when messages must contain leading white space.
.\" XXX Replacement when above is removed.
.\" This is useful to make leading and trailing spaces or empty
.\" messages visible.
By default no quote character is used.
If an empty
.Li $quote
directive is specified, then the current quote character is unset.
.El
.Pp
Empty lines
.\" XXX Remove next line when the code is fixed for POSIX conformance.
and leading blanks
in a message text source file are ignored.
Any line beginning with any character other than those
described above is ignored as a syntax error.
.Pp
Text message strings may contain any characters and
the following special characters and escape sequences.
.Pp
.Bl -column -offset indent ".Sy carriage return" ".Sy Symbol" ".Sy Sequence"
.It Sy Description Ta Sy Symbol Ta Sy Sequence
.It newline Ta NL(LF) Ta Li \en
.It horizontal tab Ta HT Ta Li \et
.It vertical tab Ta VT Ta Li \ev
.It backspace Ta BS Ta Li \eb
.It carriage return Ta CR Ta Li \er
.It form feed Ta FF Ta Li \ef
.It backslash Ta \e Ta Li \e\e
.It bit pattern Ta ddd Ta Li \eddd
.El
.Pp
A bit pattern,
.Li \eddd ,
consists of a backslash followed by
one, two, or three octal digits representing the value of the character.
The current quote character, if defined, may be escaped with a backslash
to generate the quote character.
Any character following the backslash ('\e') other than those specified
is ignored.
.Pp
A backslash at the end of the line continues the message onto the next line.
The following two lines are an example of such a message:
.Pp
.Dl 1 This message continues \e
.D1 on the next line
.Pp
Producing the following message:
.Pp
.Dl 1 This message continues on the next line
.Sh EXIT STATUS
.Ex -std
.Sh SEE ALSO
.Xr catclose 3 ,
.Xr catgets 3 ,
.Xr catopen 3 ,
.Xr nls 7
.\" XXX Close but not quite; add when code is fixed.
.\".Sh STANDARDS
.\"The
.\".Nm
.\"utility is compliant with the
.\".St -p1003.1-2004
.\"standard.
.Sh AUTHORS
The Native Language Support (NLS) message catalog facility was
contributed by
.An J.T. Conklin
.Aq jtc@NetBSD.org .
This page was originally written by
.An Kee Hinckley
.Aq nazgul@somewhere.com .