NetBSD-5.0.2/usr.bin/tn3270/ctlr/outbound.c
/* $NetBSD: outbound.c,v 1.6 2006/04/30 23:38:34 christos Exp $ */
/*-
* Copyright (c) 1988 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#ifndef lint
#if 0
static char sccsid[] = "@(#)outbound.c 4.3 (Berkeley) 4/26/91";
#else
__RCSID("$NetBSD: outbound.c,v 1.6 2006/04/30 23:38:34 christos Exp $");
#endif
#endif /* not lint */
#include <stdio.h>
#include "../general/general.h"
#include "hostctlr.h"
#include "oia.h"
#include "screen.h"
#include "options.h"
#include "../api/ebc_disp.h"
#include "../ascii/state.h"
#include "../sys_curses/telextrn.h"
#include "../general/globals.h"
#include "externs.h"
#include "declare.h"
#define SetHighestLowest(position) { \
if (position < Lowest) { \
Lowest = position; \
} \
if (position > Highest) { \
Highest = position; \
} \
}
static int LastWasTerminated = 1; /* was "control" = 1 last time? */
/* some globals */
#if !defined(PURE3274)
int OutputClock; /* what time it is */
int TransparentClock; /* time we were last in transparent */
#endif /* !defined(PURE3274) */
char CIABuffer[64] = {
0x40, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
0xc8, 0xc9, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
0x50, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7,
0xd8, 0xd9, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
0x60, 0x61, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7,
0xe8, 0xe9, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
0xf8, 0xf9, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f
};
static struct orders_def orders_def[] = ORDERS_DEF;
/*
* init_ctlr()
*
* Initialize all data from the 'data' portion to their startup values.
*/
void
init_ctlr()
{
LastWasTerminated = 1;
init_inbound();
init_oia();
}
int
FieldInc(position)
int position; /* Position in previous field */
{
ScreenImage *ptr;
ptr = (ScreenImage *)memNSchr((char *)Host+position+1, ATTR_MASK,
HighestScreen()-position, ATTR_MASK, sizeof Host[0]);
if (ptr == 0) {
ptr = (ScreenImage *)memNSchr((char *)Host+LowestScreen(), ATTR_MASK,
position-LowestScreen(), ATTR_MASK, sizeof Host[0]);
if (ptr == 0) {
return LowestScreen();
}
}
return ptr-Host;
}
int
FieldDec(position)
int position;
{
ScreenImage *ptr;
ptr = (ScreenImage *)memNSchr((char *)(Host+position)-1, ATTR_MASK,
position-LowestScreen(), ATTR_MASK, -sizeof Host[0]);
if (ptr == 0) {
ptr = (ScreenImage *)memNSchr((char *)Host+HighestScreen(), ATTR_MASK,
HighestScreen()-position, ATTR_MASK, -sizeof Host[0]);
if (ptr == 0) {
return LowestScreen();
}
}
return ptr-Host;
}
/* Clear3270 - called to clear the screen */
void
Clear3270()
{
ClearArray(Host);
DeleteAllFields(); /* get rid of all fields */
BufferAddress = SetBufferAddress(0,0);
CursorAddress = SetBufferAddress(0,0);
Lowest = LowestScreen();
Highest = HighestScreen();
}
/* AddHost - called to add a character to the buffer.
* We use a macro in this module, since we call it so
* often from loops.
*
* NOTE: It is a macro, so don't go around using AddHost(p, *c++), or
* anything similar. (I don't define any temporary variables, again
* just for the speed.)
*/
void
AddHost(position, character)
int position;
char character;
{
# define AddHostA(p,c) \
{ \
if (IsStartField(p)) { \
DeleteField(p); \
Highest = HighestScreen(); \
Lowest = LowestScreen(); \
SetHighestLowest(p); \
} \
SetHost(p, c); \
}
# define AddHost(p,c) \
{ \
if (c != GetHost(p)) { \
SetHighestLowest(p); \
} \
AddHostA(p,c); \
} /* end of macro of AddHost */
AddHost(position, character);
}
/* returns the number of characters consumed */
int
DataFromNetwork(Buffer, count, control)
char *Buffer; /* what the data is */
int count; /* and how much there is */
int control; /* this buffer ended block? */
{
int origCount;
unsigned char *buffer = (unsigned char *)Buffer;
int c;
int i;
static int Command;
static int Wcc;
origCount = count;
/*
* If this is the start of a new data stream, then look
* for an op-code and (possibly) a WCC.
*/
if (LastWasTerminated) {
if (count < 2) {
if (count == 0) {
ExitString("Short count received from host!\n", 1);
return(count);
}
Command = buffer[0];
switch (Command) { /* This had better be a read command */
case CMD_READ_MODIFIED:
case CMD_SNA_READ_MODIFIED:
case CMD_SNA_READ_MODIFIED_ALL:
SetOiaOnlineA(&OperatorInformationArea);
SetOiaModified();
DoReadModified(Command);
break;
case CMD_READ_BUFFER:
case CMD_SNA_READ_BUFFER:
SetOiaOnlineA(&OperatorInformationArea);
SetOiaModified();
DoReadBuffer();
break;
default:
{
char s_buffer[100];
sprintf(s_buffer,
"Unexpected read command code 0x%x received.\n",
Command);
ExitString(s_buffer, 1);
break;
}
}
return(1); /* We consumed everything */
}
Command = buffer[0];
Wcc = buffer[1];
if (Wcc & WCC_RESET_MDT) {
i = c = WhereAttrByte(LowestScreen());
do {
if (HasMdt(i)) {
TurnOffMdt(i);
}
i = FieldInc(i);
} while (i != c);
}
switch (Command) {
case CMD_ERASE_WRITE:
case CMD_ERASE_WRITE_ALTERNATE:
case CMD_SNA_ERASE_WRITE:
case CMD_SNA_ERASE_WRITE_ALTERNATE:
{
int newlines, newcolumns;
SetOiaOnlineA(&OperatorInformationArea);
ResetOiaTWait(&OperatorInformationArea);
SetOiaModified();
if ((Command == CMD_ERASE_WRITE)
|| (Command == CMD_SNA_ERASE_WRITE)) {
newlines = 24;
newcolumns = 80;
} else {
newlines = MaxNumberLines;
newcolumns = MaxNumberColumns;
}
if ((newlines != NumberLines)
|| (newcolumns != NumberColumns)) {
/*
* The LocalClearScreen() is really for when we
* are going from a larger screen to a smaller
* screen, and we need to clear off the stuff
* at the end of the lines, or the lines at
* the end of the screen.
*/
LocalClearScreen();
NumberLines = newlines;
NumberColumns = newcolumns;
ScreenSize = NumberLines * NumberColumns;
}
Clear3270();
#if !defined(PURE3274)
if (TransparentClock == OutputClock) {
TransStop();
}
#endif /* !defined(PURE3274) */
break;
}
case CMD_ERASE_ALL_UNPROTECTED:
case CMD_SNA_ERASE_ALL_UNPROTECTED:
SetOiaOnlineA(&OperatorInformationArea);
ResetOiaTWait(&OperatorInformationArea);
SetOiaModified();
CursorAddress = HighestScreen()+1;
for (i = LowestScreen(); i <= HighestScreen(); i = ScreenInc(i)) {
if (IsUnProtected(i)) {
if (CursorAddress > i) {
CursorAddress = i;
}
AddHost(i, '\0');
}
if (HasMdt(i)) {
TurnOffMdt(i);
}
}
if (CursorAddress == HighestScreen()+1) {
CursorAddress = SetBufferAddress(0,0);
}
UnLocked = 1;
AidByte = 0;
ResetOiaSystemLocked(&OperatorInformationArea);
SetOiaModified();
TerminalIn();
break;
case CMD_WRITE:
case CMD_SNA_WRITE:
SetOiaOnlineA(&OperatorInformationArea);
ResetOiaTWait(&OperatorInformationArea);
SetOiaModified();
break;
default:
{
char s_buffer[100];
sprintf(s_buffer,
"Unexpected write command code 0x%x received.\n",
Command);
ExitString(s_buffer, 1);
break;
}
}
count -= 2; /* strip off command and wcc */
buffer += 2;
} else {
#if !defined(PURE3274)
if (TransparentClock == OutputClock) {
TransOut(buffer, count, -1, control);
count = 0;
}
#endif /* !defined(PURE3274) */
}
LastWasTerminated = 0; /* then, reset at end... */
while (count) {
count--;
c = *buffer++;
if (IsOrder(c)) {
/* handle an order */
switch (c) {
# define Ensure(x) if (count < x) { \
if (!control) { \
return(origCount-(count+1)); \
} else { \
/* XXX - should not occur */ \
count = 0; \
break; \
} \
}
case ORDER_SF:
Ensure(1);
c = *buffer++;
count--;
if ( ! (IsStartField(BufferAddress) &&
FieldAttributes(BufferAddress) == c)) {
SetHighestLowest(BufferAddress);
NewField(BufferAddress,c);
}
BufferAddress = ScreenInc(BufferAddress);
break;
case ORDER_SBA:
Ensure(2);
i = buffer[0];
c = buffer[1];
#if !defined(PURE3274)
/* Check for transparent write */
if ((i == 0) && ((c == 0) || (c == 1) || (c == 5))) {
TransparentClock = OutputClock+1;
TransOut(buffer+2, count-2, c, control);
buffer += count;
count -= count;
break;
}
#endif /* !defined(PURE3274) */
BufferAddress = Addr3270(i, c);
buffer += 2;
count -= 2;
break;
case ORDER_IC:
CursorAddress = BufferAddress;
break;
/*
* XXX - PT is supposed to null fill the screen buffer
* under certain draconian conditions.
*/
case ORDER_PT:
i = BufferAddress;
do {
if (IsStartField(i)) {
if (!IsProtected(ScreenInc(i))) {
break;
}
}
i = ScreenInc(i);
} while (i != HighestScreen());
BufferAddress = ScreenInc(i);
break;
case ORDER_RA:
Ensure(3);
i = Addr3270(buffer[0], buffer[1]);
if ((i < 0) || (i > HighestScreen())) {
char s_buffer[200];
sprintf(s_buffer, "tn3270: %s%d.\n\t%s%d%s%d%s\n",
"Invalid 3270 order 'Repeat to Address' to address ",
i,
"(Screen currently set to ",
NumberLines,
" by ",
NumberColumns,
".)");
ExitString(s_buffer, 1);
/*NOTREACHED*/
}
c = buffer[2];
if (c == ORDER_GE) {
Ensure(4);
c = buffer[3];
buffer += 4;
count -= 4;
} else {
buffer += 3;
count -= 3;
}
do {
AddHost(BufferAddress, ebc_disp[c]);
BufferAddress = ScreenInc(BufferAddress);
} while (BufferAddress != i);
break;
case ORDER_EUA: /* (from [here,there), ie: half open interval] */
Ensure(2);
/*
* Compiler error - msc version 4.0:
* "expression too complicated".
*/
i = WhereAttrByte(BufferAddress);
c = FieldAttributes(i);
i = Addr3270(buffer[0], buffer[1]);
if ((i < 0) || (i > HighestScreen())) {
char s_buffer[200];
sprintf(s_buffer, "tn3270: %s%d.\n\t%s%d%s%d%s\n",
"Invalid 3270 order 'Erase Unprotected to Address' to address ",
i,
"(Screen currently set to ",
NumberLines,
" by ",
NumberColumns,
".)");
ExitString(s_buffer, 1);
/*NOTREACHED*/
}
do {
if (IsStartField(BufferAddress)) {
c = FieldAttributes(BufferAddress);
} else if (!IsProtectedAttr(BufferAddress, c)) {
AddHost(BufferAddress, 0);
}
BufferAddress = ScreenInc(BufferAddress);
} while (i != BufferAddress);
buffer += 2;
count -= 2;
break;
case ORDER_GE:
Ensure(2);
/* XXX Should do SOMETHING! */
/* XXX buffer += 0; */
/* XXX count -= 0; *//* For now, just use this character */
break;
case ORDER_YALE: /* special YALE defined order */
Ensure(2); /* need at least two characters */
if (*buffer == 0x5b) {
i = OptOrder(buffer+1, count-1, control);
if (i == 0) {
return(origCount-(count+1)); /* come here again */
} else {
buffer += 1 + i;
count -= (1 + i);
}
}
break;
default:
{
char s_buffer[100];
static struct orders_def unk_order
= { 0, "??", "(unknown)" };
struct orders_def *porder = &unk_order;
int s_i;
for (s_i = 0; s_i <= highestof(orders_def); s_i++) {
if (orders_def[s_i].code == c) {
porder = &orders_def[s_i];
break;
}
}
sprintf(s_buffer,
"Unsupported order '%s' (%s, 0x%x) received.\n",
porder->long_name, porder->short_name, c);
ExitString(s_buffer, 1);
/*NOTREACHED*/
}
}
if (count < 0) {
count = 0;
}
} else {
/* Data comes in large clumps - take it all */
i = BufferAddress;
AddHostA(i, ebc_disp[c]);
SetHighestLowest(i);
i = ScreenInc(i);
c = *buffer;
while (count && !IsOrder(c)) {
AddHostA(i, ebc_disp[c]);
i = ScreenInc(i);
if (i == LowestScreen()) {
SetHighestLowest(HighestScreen());
}
count--;
buffer++;
c = *buffer;
}
SetHighestLowest(i);
BufferAddress = i;
}
}
#if 0
if (count == 0) {
#endif
if (control) {
#if !defined(PURE3274)
OutputClock++; /* time rolls on */
#endif /* !defined(PURE3274) */
if (Wcc & WCC_RESTORE) {
#if !defined(PURE3274)
if (TransparentClock != OutputClock) {
AidByte = 0;
}
#else /* !defined(PURE3274) */
AidByte = 0;
#endif /* !defined(PURE3274) */
UnLocked = 1;
ResetOiaSystemLocked(&OperatorInformationArea);
SetOiaModified();
SetPsModified();
TerminalIn();
}
if (Wcc & WCC_ALARM) {
RingBell((char *)0);
}
}
LastWasTerminated = control; /* state for next time */
return(origCount);
#if 0
} else {
return(origCount-count);
}
#endif
}
/*
* Init3270()
*
* Initialize any 3270 (controller) variables to an initial state
* in preparation for accepting a connection.
*/
void
Init3270()
{
int i;
OptInit(); /* initialize mappings */
ClearArray(Host);
ClearArray(Orders);
for (i = 0; i <= highestof(orders_def); i++) {
Orders[orders_def[i].code] = 1;
}
DeleteAllFields(); /* Clear screen */
Lowest = HighestScreen()+1;
Highest = LowestScreen()-1;
CursorAddress = BufferAddress = SetBufferAddress(0,0);
UnLocked = 1;
#if !defined(PURE3274)
OutputClock = 1;
TransparentClock = -1;
#endif /* !defined(PURE3274) */
SetOiaReady3274(&OperatorInformationArea);
}
void
Stop3270()
{
ResetOiaReady3274(&OperatorInformationArea);
}