NetBSD-5.0.2/usr.sbin/syslogd/syslogd.8

Compare this file to the similar file:
Show the results in this format:
.\"	$NetBSD: syslogd.8,v 1.42.24.1 2009/02/02 21:00:47 snj Exp $
.\"
.\" Copyright (c) 1983, 1986, 1991, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     from: @(#)syslogd.8	8.1 (Berkeley) 6/6/93
.\"
.Dd February 1, 2008
.Dt SYSLOGD 8
.Os
.Sh NAME
.Nm syslogd
.Nd log systems messages
.Sh SYNOPSIS
.Nm
.Op Fl dnrSsTUv
.Bk -words
.Op Fl b Ar bind_address
.Ek
.Bk -words
.Op Fl f Ar config_file
.Ek
.Bk -words
.Op Fl g Ar group
.Ek
.Bk -words
.Op Fl m Ar mark_interval
.Ek
.Bk -words
.Op Fl P Ar file_list
.Ek
.Bk -words
.Oo
.Fl p Ar log_socket
.Op Fl p Ar log_socket2 ...
.Oc
.Ek
.Bk -words
.Op Fl t Ar chroot_dir
.Ek
.Bk -words
.Op Fl u Ar user
.Ek
.Sh DESCRIPTION
.Nm
reads and logs messages to the system console, log files, other
machines and/or users as specified by its configuration file.
The options are as follows:
.Bl -tag -width 15n
.It Fl b Ar bind_address
Specify one specific IP address or hostname to bind to.
If a hostname is specified, the IPv4 or IPv6 address
which corresponds to it is used.
.It Fl d
Enable debugging to the standard output,
and do not disassociate from the controlling terminal.
.It Fl f
Specify the pathname of an alternative configuration file;
the default is
.Pa /etc/syslog.conf .
.It Fl g Ar group
Set GID to
.Ar group
after the sockets and log files have been opened.
.It Fl m
Select the number of minutes between ``mark'' messages;
the default is 20 minutes.
.It Fl n
Do not perform hostname lookups; report only numeric addresses.
.It Fl P
Specify the pathname of a file containing a list of sockets to be
created.
The format of the file is simply one socket per line.
.It Fl p
Specify the pathname of a log socket.
Multiple
.Fl p
options create multiple log sockets.
If no
.Fl p
arguments are created, the default socket of
.Pa /var/run/log
is used.
.It Fl r
Disable the compression of repeated instances of the same line
into a single line of the form
.Dq last message repeated N times .
.It Fl S
Sync kernel messages to disk immediately.
.It Fl s
Select
.Dq secure
mode, in which
.Nm
does not listen on a UDP socket but only communicates over a
.Ux
domain socket.
This is valuable when the machine on
which
.Nm
runs is subject to attack over the network and it is desired
that the machine be protected from attempts to remotely fill logs
and similar attacks.
.It Fl t Ar chroot_dir
.Xr chroot 2
to
.Ar chroot_dir
after the sockets and log files have been opened.
.It Fl T
Always use the local time and date for messages received from the
network, instead of the timestamp field supplied in the message
by the remote host.
This is useful if some of the originating hosts can't keep time
properly or are unable to generate a correct timestamp.
.It Fl u Ar user
Set UID to
.Ar user
after the sockets and log files have been opened.
.It Fl U
Unique priority logging.
Only log messages at the priority specified by the selector in the
configuration file.
Without this option, messages at the specified priority or higher are
logged.
This option changes the default priority comparison from
.Sq \*[Gt]=
to
.Sq = .
.It Fl v
Verbose logging.
If specified once, the numeric facility and priority are logged with
each locally-written message.
If specified more than once, the names of the facility and priority are
logged with each locally-written message.
.El
.Pp
.Nm
reads its configuration file when it starts up and whenever it
receives a hangup signal.
For information on the format of the configuration file,
see
.Xr syslog.conf 5 .
.Pp
.Nm
reads messages from the
.Ux
domain socket
.Pa /var/run/log ,
from an Internet domain socket specified in
.Pa /etc/services ,
and from the special device
.Pa /dev/klog
(to read kernel messages).
.Pp
.Nm
creates the file
.Pa /var/run/syslogd.pid ,
and stores its process
id there.
This can be used to kill or reconfigure
.Nm .
.Pp
By using multiple
.Fl p
options, one can set up many chroot environments by passing the pathname
to the log socket
.Pa ( /var/run/log )
in each chroot area to
.Nm .
For example:
.Dl syslogd -p /var/run/log -p /web/var/run/log -p /ftp/var/run/log
.Pp
Note: the normal log socket must now also be passed to
.Nm .
.Pp
The logged message includes the date, time, and hostname (or pathname of
the log socket).
Commonly, the program name and the process id is included.
.Pp
The date and time are taken from the received message.
If the format of the timestamp field is incorrect, time obtained from
the local host is used instead.
This can be overridden by the
.Fl T
flag.
.Pp
Accesses from UDP socket can be filtered by libwrap configuration files, like
.Pa /etc/hosts.deny .
Specify
.Dq Li syslogd
in
.Ar daemon_list
portion of the configuration files.
Refer to
.Xr hosts_access 5
for details.
.Ss SYSLOG PROTOCOL NOTES
The message sent to
.Nm
should consist of a single line.
The message can contain a priority code, which should be a preceding
decimal number in angle braces, for example,
.Sq Aq 5 .
This priority code should map into the priorities defined in the
include file
.Aq Pa sys/syslog.h .
See RFC 3164 for detailed description of the message format.
.Pp
Messages from the local kernel that are not tagged with a priority code
receive the default facility
.Dv LOG_KERN
and priority
.Dv LOG_NOTICE .
All other untagged messages receive the default facility
.Dv LOG_USER
and priority
.Dv LOG_NOTICE .
.Sh FILES
.Bl -tag -width /var/run/syslogd.pid -compact
.It Pa /etc/syslog.conf
The configuration file.
.It Pa /var/run/syslogd.pid
The process id of current
.Nm .
.It Pa /var/run/log
Name of the
.Ux
domain datagram log socket.
.It Pa /dev/klog
The kernel log device.
.El
.Sh SEE ALSO
.Xr logger 1 ,
.Xr syslog 3 ,
.Xr services 5 ,
.Xr syslog.conf 5 ,
.Xr newsyslog 8
.Rs
.%R RFC
.%N 3164
.%D August 2001
.%T The BSD syslog Protocol
.Re
.Sh HISTORY
The
.Nm
command appeared in
.Bx 4.3 .
Support for multiple log sockets appeared in
.Nx 1.4 .
libwrap support appeared in
.Nx 1.6 .