OpenBSD-4.6/gnu/usr.bin/cvs/doc/Makefile.in

# Makefile.in generated automatically by automake 1.4e from Makefile.am.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile for GNU CVS documentation (excluding man pages - see ../man).
# Copyright (C) 1986, 1988-1990, 2000 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

#DISTFILES = \
#	.cvsignore \
#	RCSFILES \

# AUTOMAKE_OPTIONS = no-texinfo.tex

# FIXME - these rebuild every 'make dist' with some BSD makes due to a bug
# that prevents make from searching VPATH for targets.  There is some
# machinery in place in configure.in to work around this for some targets
# (see the CVSvn.texi target below) now, but fixing the two info_TEXINFOS
# targets below is probably going to require work on Automake


SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
AMTAR = @AMTAR@
AWK = @AWK@
CC = @CC@
CSH = @CSH@
DEPDIR = @DEPDIR@
ETAGS = @ETAGS@
ETAGS_INCLUDE_OPTION = @ETAGS_INCLUDE_OPTION@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTALL_STRIP_PROGRAM_ENV = @INSTALL_STRIP_PROGRAM_ENV@
KRB4 = @KRB4@
LN_S = @LN_S@
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
PERL = @PERL@
PR = @PR@
PS2PDF = @PS2PDF@
RANLIB = @RANLIB@
ROFF = @ROFF@
STRIP = @STRIP@
TEXI2DVI = @TEXI2DVI@
VERSION = @VERSION@
YACC = @YACC@
_am_include = @_am_include@
_am_quote = @_am_quote@
includeopt = @includeopt@
install_sh = @install_sh@

info_TEXINFOS = cvs.texinfo cvsclient.texi
cvs_TEXINFOS = CVSvn.texi
cvsclient_TEXINFOS = CVSvn.texi

POSTSCRIPTS = \
	cvs.ps \
	cvs-paper.ps \
	cvsclient.ps


PDFS = \
	cvs-paper.pdf \
	cvs.pdf \
	cvsclient.pdf


TXTS = \
	cvs.txt \
	cvsclient.txt


EXTRA_DIST = \
	$(POSTSCRIPTS) \
	.cvsignore \
	CVSvn.texi.in \
	ChangeLog.fsf \
	RCSFILES \
	cvs-paper.ms \
	cvs.aux \
	cvsclient.aux


# Listing cvs.cps & cvs.fns here is a workaround for an Automake deficiency
MOSTLYCLEANFILES = \
	cvs.cps \
	cvs.fns


CLEANFILES = \
	$(PDFS) \
	$(TXTS)


MAINTAINERCLEANFILES = \
	cvs-paper.ps


SUFFIXES = .aux .txt .pdf
EXEEXT =
OBJEXT = o
subdir = doc
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h $(top_builddir)/src/options.h
CONFIG_CLEAN_FILES =
CFLAGS = @CFLAGS@
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
DIST_SOURCES =
INFO_DEPS = cvs.info cvsclient.info
DVIS = cvs.dvi cvsclient.dvi
TEXINFOS = cvs.texinfo cvsclient.texi
DIST_COMMON = $(cvs_TEXINFOS) $(cvsclient_TEXINFOS) ChangeLog \
	Makefile.am Makefile.in texinfo.tex
all: all-am

.SUFFIXES:
.SUFFIXES: .aux .txt .pdf .dvi .info .ps .texi .texinfo .txi

$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile

Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && \
	  CONFIG_HEADERS= CONFIG_LINKS= \
	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status

cvs.info: cvs.texinfo $(cvs_TEXINFOS)
cvs.dvi: cvs.texinfo $(cvs_TEXINFOS)

cvsclient.info: cvsclient.texi $(cvsclient_TEXINFOS)
cvsclient.dvi: cvsclient.texi $(cvsclient_TEXINFOS)

.texi.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $(srcdir)/`echo $< | sed 's,.*/,,'` -o $@

.texi.dvi:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.texi:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $(srcdir)/`echo $< | sed 's,.*/,,'` -o $@

.texinfo.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $(srcdir)/`echo $< | sed 's,.*/,,'` -o $@

.texinfo.dvi:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.texinfo:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $(srcdir)/`echo $< | sed 's,.*/,,'` -o $@

DVIPS = dvips
.dvi.ps:
	$(DVIPS) $< -o $@

uninstall-info-am:
	$(PRE_UNINSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file"; \
	    install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (if cd $(DESTDIR)$(infodir); then \
	     echo " rm -f $$file $$file-[0-9] $$file-[0-9][0-9])"; \
	     rm -f $$file $$file-[0-9] $$file-[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  d=$(srcdir); \
	  for file in `CDPATH=: && cd $$d && eval echo $$base*`; do \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f cvs.aux cvs.cp cvs.cps cvs.dvi cvs.fn cvs.fns cvs.ky cvs.log cvs.pg \
	  cvs.ps cvs.toc cvs.tp cvs.vr cvsclient.aux cvsclient.cp \
	  cvsclient.dvi cvsclient.fn cvsclient.ky cvsclient.log \
	  cvsclient.pg cvsclient.ps cvsclient.toc cvsclient.tp \
	  cvsclient.vr

maintainer-clean-aminfo:
	cd $(srcdir) && \
	for i in $(INFO_DEPS); do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done
tags: TAGS
TAGS:


DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pR $$d/$$file $(distdir) \
	    || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="${top_distdir}" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS)

installdirs:
	$(mkinstalldirs) $(DESTDIR)$(infodir)

install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am

install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_PROGRAM_ENV='$(INSTALL_STRIP_PROGRAM_ENV)' install

mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-rm -f Makefile.in
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am

install-exec-am:

install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  for ifile in `CDPATH=: && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	    if test -f $$ifile; then \
	      echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$ifile"; \
	      $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$ifile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi
install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-am

.PHONY: all all-am check check-am clean clean-generic dist-info \
	distclean distclean-generic distdir dvi dvi-am info info-am \
	install install-am install-data install-data-am install-exec \
	install-exec-am install-info install-info-am install-man \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic mostlyclean mostlyclean-aminfo \
	mostlyclean-generic uninstall uninstall-am uninstall-info-am


doc ps: $(POSTSCRIPTS)
.PHONY: doc ps

pdf: $(PDFS)
.PHONY: pdf

txt: $(TXTS)
.PHONY: txt

dvi: cvs.dvi cvsclient.dvi
.PHONY: dvi

cvs.aux cvs.pdf cvs.txt: cvs.texinfo $(cvs_TEXINFOS)
cvsclient.aux cvsclient.pdf cvsclient.txt: cvsclient.texi $(cvsclient_TEXINFOS)

# These targets need to be very specific so that the other PDFs get generated correctly.
# If they are more generic and cvs.ps is made before cvs.pdf, then cvs.pdf will be
# generated from the generic target and the PS source, which contains less information
# than the usual texinfo source.
cvs-paper.pdf: cvs-paper.ps
	$(ROFF) -t -p -ms -Tps $< > $@-t
	mv $@-t $@

cvs-paper.ps: cvs-paper.ms
	$(PS2PDF) $< $@

# texinfo based targets automake neglects to include
.texinfo.pdf:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) --pdf $<
.txi.pdf:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) --pdf $<
.texi.pdf:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) --pdf $<

.texinfo.aux:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.txi.aux:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.texi.aux:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.texinfo.txt:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(MAKEINFO) $< --no-headers -o $@
.txi.txt:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(MAKEINFO) $< --no-headers -o $@
.texi.txt:
	TEXINPUTS=$(srcdir):$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(MAKEINFO) $< --no-headers -o $@

# - CVSvn.texi needs to be updated only once, since it depends on
#   configure.in, not on the results of a 'configure' run.
# - It is guaranteed (with GNU Make) that when the version in configure.in
#   is changed, acversion.m4 is built only after the new version number is
#   propagated to the Makefile.  (Libtool uses the same guarantee.)
# - Of the next three targets, only the next one or the following two should be
#   enabled, not all three
# - This is the target for systems without the BSD VPATH bug in make or with
#   $(srcdir) = $(builddir)
@MAKE_TARGETS_IN_VPATH_TRUE@CVSvn.texi: $(srcdir)/CVSvn.texi.in $(top_srcdir)/configure.in
@MAKE_TARGETS_IN_VPATH_TRUE@	sed 's,@VERSION\@,$(VERSION),g' $(srcdir)/CVSvn.texi.in >$(srcdir)/CVSvn.ttexi
@MAKE_TARGETS_IN_VPATH_TRUE@	mv $(srcdir)/CVSvn.ttexi $(srcdir)/CVSvn.texi
# - The next two targets are a workaround for the fact that some BSD makes
#   don't look through VPATH for targets, but only for sources.
# - They should be disabled on systems without the bug and in environments
#   where $(srcdir) = $(builddir)
@MAKE_TARGETS_IN_VPATH_FALSE@#CVSvn.texi: $(srcdir)/CVSvn.texi
@MAKE_TARGETS_IN_VPATH_FALSE@	# use cat so the time stamp gets set properly
@MAKE_TARGETS_IN_VPATH_FALSE@	cat $(srcdir)/CVSvn.texi >$@
@MAKE_TARGETS_IN_VPATH_FALSE@CVSvn.texi: $(srcdir)/CVSvn.texi.in $(top_srcdir)/configure.in
@MAKE_TARGETS_IN_VPATH_FALSE@	sed 's,@VERSION\@,$(VERSION),g' $(srcdir)/CVSvn.texi.in >CVSvn.ttexi
@MAKE_TARGETS_IN_VPATH_FALSE@	mv CVSvn.ttexi CVSvn.texi

# for backwards compatibility with the old makefiles
realclean: maintainer-clean
.PHONY: realclean

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: