OpenBSD-4.6/sbin/newfs_msdos/newfs_msdos.8

Compare this file to the similar file:
Show the results in this format:
.\"	$OpenBSD: newfs_msdos.8,v 1.22 2007/09/28 09:57:01 jmc Exp $
.\"
.\" Copyright (c) 1998 Robert Nordier
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in
.\"    the documentation and/or other materials provided with the
.\"    distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS
.\" OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
.\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY
.\" DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
.\" GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
.\" IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
.\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
.\" IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD: src/sbin/newfs_msdos/newfs_msdos.8,v 1.6 1999/08/28 00:13:52 peter Exp $
.\"
.Dd $Mdocdate: September 28 2007 $
.Dt NEWFS_MSDOS 8
.Os
.Sh NAME
.Nm newfs_msdos
.Nd construct a new MS-DOS (FAT) file system
.Sh SYNOPSIS
.Nm newfs_msdos
.Bk -words
.Op Fl N
.Op Fl a Ar FAT-size
.Op Fl B Ar boot
.Op Fl b Ar block-size
.Op Fl c Ar cluster-size
.Op Fl e Ar dirents
.Op Fl F Ar FAT-type
.Op Fl f Ar format
.Op Fl h Ar heads
.Op Fl I Ar volid
.Op Fl i Ar info
.Op Fl k Ar backup
.Op Fl L Ar label
.Op Fl m Ar media
.Op Fl n Ar FATs
.Op Fl O Ar OEM
.Op Fl o Ar hidden
.Op Fl r Ar reserved
.Op Fl S Ar sector-size
.Op Fl s Ar total
.Op Fl u Ar track-size
.Ar special
.Op Ar disktype
.Ek
.Sh DESCRIPTION
The
.Nm
utility creates a FAT12, FAT16, or FAT32 file system on device
.Ar special ,
using
.Xr disktab 5
entry
.Ar disktype
to determine geometry, if required.
.Pp
The options are as follows:
.Bl -tag -width Ds
.It Fl a Ar FAT-size
Number of sectors per FAT.
.It Fl B Ar boot
Get bootstrap from file.
.It Fl b Ar block-size
File system block size (bytes per cluster).
This should resolve to an acceptable number of sectors per cluster (see below).
.It Fl c Ar cluster-size
Sectors per cluster.
Acceptable values are powers of 2 in the range 1 through 128.
.It Fl e Ar dirents
Number of root directory entries (FAT12 and FAT16 only).
.It Fl F Ar FAT-type
FAT type (one of 12, 16, or 32).
.It Fl f Ar format
Specify a standard (floppy disk) format.
The eight standard formats
are (capacities in kilobytes): 160, 180, 320, 360, 720, 1200, 1440,
2880.
.It Fl h Ar heads
Number of drive heads.
.It Fl I Ar volid
Volume ID.
.It Fl i Ar info
Location of the file system info sector (FAT32 only).
A value of 0xffff signifies no info sector.
.It Fl k Ar backup
Location of the backup boot sector (FAT32 only).
A value of 0xffff signifies no backup sector.
.It Fl L Ar label
Volume label (up to 11 characters).
The label should consist of
only those characters permitted in regular DOS (8+3) filenames.
.It Fl m Ar media
Media descriptor (acceptable range 0xf0 to 0xff).
.It Fl N
Don't create a file system: just print out parameters.
.It Fl n Ar FATs
Number of FATs.
Acceptable values are 1 to 16 inclusive.
The default is 2.
.It Fl O Ar OEM
OEM string (up to 8 characters).
The default is
"BSD  4.4".
.It Fl o Ar hidden
Number of hidden sectors.
.It Fl r Ar reserved
Number of reserved sectors.
.It Fl S Ar sector-size
Number of bytes per sector.
Acceptable values are powers of 2 in the range 128 through 32768.
.It Fl s Ar total
File system size.
.It Fl u Ar track-size
Number of sectors per track.
.El
.Sh NOTES
FAT file system parameters occupy a "Boot Sector BPB (BIOS Parameter
Block)" in the first of the "reserved" sectors which precede the actual
file system.
For reference purposes, this structure is presented below.
.Bd -literal
struct bsbpb {
	u_int16_t	bps;		/* [-S] bytes per sector */
	u_int8_t	spc;		/* [-c] sectors per cluster */
	u_int16_t	res;		/* [-r] reserved sectors */
	u_int8_t	nft;		/* [-n] number of FATs */
	u_int16_t	rde;		/* [-e] root directory entries */
	u_int16_t	sec;		/* [-s] total sectors */
	u_int8_t	mid;		/* [-m] media descriptor */
	u_int16_t	spf;		/* [-a] sectors per FAT */
	u_int16_t	spt;		/* [-u] sectors per track */
	u_int16_t	hds;		/* [-h] drive heads */
	u_int32_t	hid;		/* [-o] hidden sectors */
	u_int32_t	bsec;		/* [-s] big total sectors */
};

/* FAT32 extensions */
struct bsxbpb {
	u_int32_t	bspf;		/* [-a] big sectors per FAT */
	u_int16_t	xflg;		/* control flags */
	u_int16_t	vers;		/* file system version */
	u_int32_t	rdcl;		/* root directory start cluster */
	u_int16_t	infs;		/* [-i] file system info sector */
	u_int16_t	bkbs;		/* [-k] backup boot sector */
};
.Ed
.Sh EXAMPLES
Create a file system, using default parameters, on /dev/rwd0i.
.Dl newfs_msdos /dev/rwd0i
.Pp
Create a standard 1.44M file system, with volume label "foo", on
/dev/rfd0c.
.Dl newfs_msdos -f 1440 -L foo fd0c
.Sh DIAGNOSTICS
Exit status is 0 on success and 1 on error.
.Sh SEE ALSO
.Xr disktab 5 ,
.Xr disklabel 8 ,
.Xr fdisk 8 ,
.Xr newfs 8
.Sh HISTORY
The
.Nm
command first appeared in
.Ox 2.1 .
.Sh AUTHORS
.An Robert Nordier Aq rnordier@FreeBSD.org .