OpenBSD-4.6/sys/dev/usb/if_upgt.c
/* $OpenBSD: if_upgt.c,v 1.44 2009/04/09 09:15:24 mglocker Exp $ */
/*
* Copyright (c) 2007 Marcus Glocker <mglocker@openbsd.org>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "bpfilter.h"
#include <sys/param.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/systm.h>
#include <sys/timeout.h>
#include <sys/conf.h>
#include <sys/device.h>
#include <machine/bus.h>
#include <machine/endian.h>
#include <machine/intr.h>
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/if_ether.h>
#include <netinet/ip.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_radiotap.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/if_upgtvar.h>
/*
* Driver for the USB PrismGT devices.
*
* For now just USB 2.0 devices with the GW3887 chipset are supported.
* The driver has been written based on the firmware version 2.13.1.0_LM87.
*
* TODO's:
* - Fix MONITOR mode (MAC filter).
* - Add HOSTAP mode.
* - Add IBSS mode.
* - Support the USB 1.0 devices (NET2280, ISL3880, ISL3886 chipsets).
*
* Parts of this driver has been influenced by reading the p54u driver
* written by Jean-Baptiste Note <jean-baptiste.note@m4x.org> and
* Sebastien Bourdeauducq <lekernel@prism54.org>.
*/
#ifdef UPGT_DEBUG
int upgt_debug = 2;
#define DPRINTF(l, x...) do { if ((l) <= upgt_debug) printf(x); } while (0)
#else
#define DPRINTF(l, x...)
#endif
/*
* Prototypes.
*/
int upgt_match(struct device *, void *, void *);
void upgt_attach(struct device *, struct device *, void *);
void upgt_attach_hook(void *);
void upgt_shutdown_hook(void *);
int upgt_detach(struct device *, int);
int upgt_activate(struct device *, enum devact);
int upgt_device_type(struct upgt_softc *, uint16_t, uint16_t);
int upgt_device_init(struct upgt_softc *);
int upgt_mem_init(struct upgt_softc *);
uint32_t upgt_mem_alloc(struct upgt_softc *);
void upgt_mem_free(struct upgt_softc *, uint32_t);
int upgt_fw_alloc(struct upgt_softc *);
void upgt_fw_free(struct upgt_softc *);
int upgt_fw_verify(struct upgt_softc *);
int upgt_fw_load(struct upgt_softc *);
int upgt_fw_copy(char *, char *, int);
int upgt_eeprom_read(struct upgt_softc *);
int upgt_eeprom_parse(struct upgt_softc *);
void upgt_eeprom_parse_hwrx(struct upgt_softc *, uint8_t *);
void upgt_eeprom_parse_freq3(struct upgt_softc *, uint8_t *, int);
void upgt_eeprom_parse_freq4(struct upgt_softc *, uint8_t *, int);
void upgt_eeprom_parse_freq6(struct upgt_softc *, uint8_t *, int);
int upgt_ioctl(struct ifnet *, u_long, caddr_t);
int upgt_init(struct ifnet *);
void upgt_stop(struct upgt_softc *);
int upgt_media_change(struct ifnet *);
void upgt_newassoc(struct ieee80211com *, struct ieee80211_node *,
int);
int upgt_newstate(struct ieee80211com *, enum ieee80211_state, int);
void upgt_newstate_task(void *);
void upgt_next_scan(void *);
void upgt_start(struct ifnet *);
void upgt_watchdog(struct ifnet *);
void upgt_tx_task(void *);
void upgt_tx_done(struct upgt_softc *, uint8_t *);
void upgt_rx_cb(usbd_xfer_handle, usbd_private_handle, usbd_status);
void upgt_rx(struct upgt_softc *, uint8_t *, int);
void upgt_setup_rates(struct upgt_softc *);
uint8_t upgt_rx_rate(struct upgt_softc *, const int);
int upgt_set_macfilter(struct upgt_softc *, uint8_t state);
int upgt_set_channel(struct upgt_softc *, unsigned);
void upgt_set_led(struct upgt_softc *, int);
void upgt_set_led_blink(void *);
int upgt_get_stats(struct upgt_softc *);
int upgt_alloc_tx(struct upgt_softc *);
int upgt_alloc_rx(struct upgt_softc *);
int upgt_alloc_cmd(struct upgt_softc *);
void upgt_free_tx(struct upgt_softc *);
void upgt_free_rx(struct upgt_softc *);
void upgt_free_cmd(struct upgt_softc *);
int upgt_bulk_xmit(struct upgt_softc *, struct upgt_data *,
usbd_pipe_handle, uint32_t *, int);
void upgt_hexdump(void *, int);
uint32_t upgt_crc32_le(const void *, size_t);
uint32_t upgt_chksum_le(const uint32_t *, size_t);
struct cfdriver upgt_cd = {
NULL, "upgt", DV_IFNET
};
const struct cfattach upgt_ca = {
sizeof(struct upgt_softc),
upgt_match,
upgt_attach,
upgt_detach,
upgt_activate,
};
static const struct usb_devno upgt_devs_1[] = {
/* version 1 devices */
{ USB_VENDOR_ALCATELT, USB_PRODUCT_ALCATELT_ST120G }
};
static const struct usb_devno upgt_devs_2[] = {
/* version 2 devices */
{ USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_PRISM_GT },
{ USB_VENDOR_ALCATELT, USB_PRODUCT_ALCATELT_ST121G },
{ USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5D7050 },
{ USB_VENDOR_CISCOLINKSYS, USB_PRODUCT_CISCOLINKSYS_WUSB54AG },
{ USB_VENDOR_CISCOLINKSYS, USB_PRODUCT_CISCOLINKSYS_WUSB54GV2 },
{ USB_VENDOR_CONCEPTRONIC, USB_PRODUCT_CONCEPTRONIC_PRISM_GT },
{ USB_VENDOR_DELL, USB_PRODUCT_DELL_PRISM_GT_1 },
{ USB_VENDOR_DELL, USB_PRODUCT_DELL_PRISM_GT_2 },
{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DWLG122A2 },
{ USB_VENDOR_FSC, USB_PRODUCT_FSC_E5400 },
{ USB_VENDOR_GLOBESPAN, USB_PRODUCT_GLOBESPAN_PRISM_GT_1 },
{ USB_VENDOR_GLOBESPAN, USB_PRODUCT_GLOBESPAN_PRISM_GT_2 },
{ USB_VENDOR_INTERSIL, USB_PRODUCT_INTERSIL_PRISM_GT },
{ USB_VENDOR_PHEENET, USB_PRODUCT_PHEENET_GWU513 },
{ USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_CPWUA054 },
{ USB_VENDOR_SMC, USB_PRODUCT_SMC_2862WG },
{ USB_VENDOR_USR, USB_PRODUCT_USR_USR5422 },
{ USB_VENDOR_WISTRONNEWEB, USB_PRODUCT_WISTRONNEWEB_UR045G },
{ USB_VENDOR_XYRATEX, USB_PRODUCT_XYRATEX_PRISM_GT_1 },
{ USB_VENDOR_XYRATEX, USB_PRODUCT_XYRATEX_PRISM_GT_2 },
{ USB_VENDOR_ZCOM, USB_PRODUCT_ZCOM_MD40900 },
{ USB_VENDOR_ZCOM, USB_PRODUCT_ZCOM_XG703A }
};
int
upgt_match(struct device *parent, void *match, void *aux)
{
struct usb_attach_arg *uaa = aux;
if (uaa->iface != NULL)
return (UMATCH_NONE);
if (usb_lookup(upgt_devs_1, uaa->vendor, uaa->product) != NULL)
return (UMATCH_VENDOR_PRODUCT);
if (usb_lookup(upgt_devs_2, uaa->vendor, uaa->product) != NULL)
return (UMATCH_VENDOR_PRODUCT);
return (UMATCH_NONE);
}
void
upgt_attach(struct device *parent, struct device *self, void *aux)
{
struct upgt_softc *sc = (struct upgt_softc *)self;
struct usb_attach_arg *uaa = aux;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
usbd_status error;
int i;
/*
* Attach USB device.
*/
sc->sc_udev = uaa->device;
/* check device type */
if (upgt_device_type(sc, uaa->vendor, uaa->product) != 0)
return;
/* set configuration number */
if (usbd_set_config_no(sc->sc_udev, UPGT_CONFIG_NO, 0) != 0) {
printf("%s: could not set configuration no!\n",
sc->sc_dev.dv_xname);
return;
}
/* get the first interface handle */
error = usbd_device2interface_handle(sc->sc_udev, UPGT_IFACE_INDEX,
&sc->sc_iface);
if (error != 0) {
printf("%s: could not get interface handle!\n",
sc->sc_dev.dv_xname);
return;
}
/* find endpoints */
id = usbd_get_interface_descriptor(sc->sc_iface);
sc->sc_rx_no = sc->sc_tx_no = -1;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (ed == NULL) {
printf("%s: no endpoint descriptor for iface %d!\n",
sc->sc_dev.dv_xname, i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
sc->sc_tx_no = ed->bEndpointAddress;
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
sc->sc_rx_no = ed->bEndpointAddress;
/*
* 0x01 TX pipe
* 0x81 RX pipe
*
* Deprecated scheme (not used with fw version >2.5.6.x):
* 0x02 TX MGMT pipe
* 0x82 TX MGMT pipe
*/
if (sc->sc_tx_no != -1 && sc->sc_rx_no != -1)
break;
}
if (sc->sc_rx_no == -1 || sc->sc_tx_no == -1) {
printf("%s: missing endpoint!\n", sc->sc_dev.dv_xname);
return;
}
/* setup tasks and timeouts */
usb_init_task(&sc->sc_task_newstate, upgt_newstate_task, sc);
usb_init_task(&sc->sc_task_tx, upgt_tx_task, sc);
timeout_set(&sc->scan_to, upgt_next_scan, sc);
timeout_set(&sc->led_to, upgt_set_led_blink, sc);
/*
* Open TX and RX USB bulk pipes.
*/
error = usbd_open_pipe(sc->sc_iface, sc->sc_tx_no, USBD_EXCLUSIVE_USE,
&sc->sc_tx_pipeh);
if (error != 0) {
printf("%s: could not open TX pipe: %s!\n",
sc->sc_dev.dv_xname, usbd_errstr(error));
goto fail;
}
error = usbd_open_pipe(sc->sc_iface, sc->sc_rx_no, USBD_EXCLUSIVE_USE,
&sc->sc_rx_pipeh);
if (error != 0) {
printf("%s: could not open RX pipe: %s!\n",
sc->sc_dev.dv_xname, usbd_errstr(error));
goto fail;
}
/*
* Allocate TX, RX, and CMD xfers.
*/
if (upgt_alloc_tx(sc) != 0)
goto fail;
if (upgt_alloc_rx(sc) != 0)
goto fail;
if (upgt_alloc_cmd(sc) != 0)
goto fail;
/*
* We need the firmware loaded to complete the attach.
*/
if (rootvp == NULL)
mountroothook_establish(upgt_attach_hook, sc);
else
upgt_attach_hook(sc);
return;
fail:
printf("%s: %s failed!\n", sc->sc_dev.dv_xname, __func__);
}
void
upgt_attach_hook(void *arg)
{
struct upgt_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &ic->ic_if;
usbd_status error;
int i;
/*
* Load firmware file into memory.
*/
if (upgt_fw_alloc(sc) != 0)
goto fail;
/*
* Initialize the device.
*/
if (upgt_device_init(sc) != 0)
goto fail;
/*
* Verify the firmware.
*/
if (upgt_fw_verify(sc) != 0)
goto fail;
/*
* Calculate device memory space.
*/
if (sc->sc_memaddr_frame_start == 0 || sc->sc_memaddr_frame_end == 0) {
printf("%s: could not find memory space addresses on FW!\n",
sc->sc_dev.dv_xname);
goto fail;
}
sc->sc_memaddr_frame_end -= UPGT_MEMSIZE_RX + 1;
sc->sc_memaddr_rx_start = sc->sc_memaddr_frame_end + 1;
DPRINTF(1, "%s: memory address frame start=0x%08x\n",
sc->sc_dev.dv_xname, sc->sc_memaddr_frame_start);
DPRINTF(1, "%s: memory address frame end=0x%08x\n",
sc->sc_dev.dv_xname, sc->sc_memaddr_frame_end);
DPRINTF(1, "%s: memory address rx start=0x%08x\n",
sc->sc_dev.dv_xname, sc->sc_memaddr_rx_start);
upgt_mem_init(sc);
/*
* Load the firmware.
*/
if (upgt_fw_load(sc) != 0)
goto fail;
/*
* Startup the RX pipe.
*/
struct upgt_data *data_rx = &sc->rx_data;
usbd_setup_xfer(data_rx->xfer, sc->sc_rx_pipeh, data_rx, data_rx->buf,
MCLBYTES, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, upgt_rx_cb);
error = usbd_transfer(data_rx->xfer);
if (error != 0 && error != USBD_IN_PROGRESS) {
printf("%s: could not queue RX transfer!\n",
sc->sc_dev.dv_xname);
goto fail;
}
usbd_delay_ms(sc->sc_udev, 100);
/*
* Read the whole EEPROM content and parse it.
*/
if (upgt_eeprom_read(sc) != 0)
goto fail;
if (upgt_eeprom_parse(sc) != 0)
goto fail;
/*
* Setup the 802.11 device.
*/
ic->ic_phytype = IEEE80211_T_OFDM;
ic->ic_opmode = IEEE80211_M_STA;
ic->ic_state = IEEE80211_S_INIT;
ic->ic_caps =
IEEE80211_C_MONITOR |
IEEE80211_C_SHPREAMBLE |
IEEE80211_C_SHSLOT |
IEEE80211_C_WEP |
IEEE80211_C_RSN;
ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b;
ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g;
for (i = 1; i <= 14; i++) {
ic->ic_channels[i].ic_freq =
ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
ic->ic_channels[i].ic_flags =
IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM |
IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
}
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = upgt_init;
ifp->if_ioctl = upgt_ioctl;
ifp->if_start = upgt_start;
ifp->if_watchdog = upgt_watchdog;
IFQ_SET_READY(&ifp->if_snd);
memcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ);
if_attach(ifp);
ieee80211_ifattach(ifp);
ic->ic_newassoc = upgt_newassoc;
sc->sc_newstate = ic->ic_newstate;
ic->ic_newstate = upgt_newstate;
ieee80211_media_init(ifp, upgt_media_change, ieee80211_media_status);
#if NBPFILTER > 0
bpfattach(&sc->sc_drvbpf, ifp, DLT_IEEE802_11_RADIO,
sizeof(struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN);
sc->sc_rxtap_len = sizeof(sc->sc_rxtapu);
sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
sc->sc_rxtap.wr_ihdr.it_present = htole32(UPGT_RX_RADIOTAP_PRESENT);
sc->sc_txtap_len = sizeof(sc->sc_txtapu);
sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
sc->sc_txtap.wt_ihdr.it_present = htole32(UPGT_TX_RADIOTAP_PRESENT);
#endif
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, &sc->sc_dev);
printf("%s: address %s\n",
sc->sc_dev.dv_xname, ether_sprintf(ic->ic_myaddr));
/* setup shutdown hook */
sc->sc_sdhook = shutdownhook_establish(upgt_shutdown_hook, sc);
/* device attached */
sc->sc_flags |= UPGT_DEVICE_ATTACHED;
return;
fail:
printf("%s: %s failed!\n", sc->sc_dev.dv_xname, __func__);
}
void
upgt_shutdown_hook(void *arg)
{
struct upgt_softc *sc = (struct upgt_softc *)arg;
DPRINTF(1, "%s: %s\n", sc->sc_dev.dv_xname, __func__);
/* reset device */
upgt_set_led(sc, UPGT_LED_OFF);
(void)upgt_device_init(sc);
}
int
upgt_detach(struct device *self, int flags)
{
struct upgt_softc *sc = (struct upgt_softc *)self;
struct ifnet *ifp = &sc->sc_ic.ic_if;
int s;
DPRINTF(1, "%s: %s\n", sc->sc_dev.dv_xname, __func__);
s = splusb();
/* abort and close TX / RX pipes */
if (sc->sc_tx_pipeh != NULL) {
usbd_abort_pipe(sc->sc_tx_pipeh);
usbd_close_pipe(sc->sc_tx_pipeh);
}
if (sc->sc_rx_pipeh != NULL) {
usbd_abort_pipe(sc->sc_rx_pipeh);
usbd_close_pipe(sc->sc_rx_pipeh);
}
/* remove tasks and timeouts */
usb_rem_task(sc->sc_udev, &sc->sc_task_newstate);
usb_rem_task(sc->sc_udev, &sc->sc_task_tx);
timeout_del(&sc->scan_to);
timeout_del(&sc->led_to);
/* free xfers */
upgt_free_tx(sc);
upgt_free_rx(sc);
upgt_free_cmd(sc);
/* free firmware */
upgt_fw_free(sc);
if (sc->sc_flags & UPGT_DEVICE_ATTACHED) {
/* detach interface */
ieee80211_ifdetach(ifp);
if_detach(ifp);
}
if (sc->sc_sdhook != NULL)
shutdownhook_disestablish(sc->sc_sdhook);
splx(s);
usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, &sc->sc_dev);
return (0);
}
int
upgt_activate(struct device *self, enum devact act)
{
switch (act) {
case DVACT_ACTIVATE:
return (EOPNOTSUPP);
case DVACT_DEACTIVATE:
break;
}
return (0);
}
int
upgt_device_type(struct upgt_softc *sc, uint16_t vendor, uint16_t product)
{
if (usb_lookup(upgt_devs_1, vendor, product) != NULL) {
sc->sc_device_type = 1;
/* XXX */
printf("%s: version 1 devices not supported yet!\n",
sc->sc_dev.dv_xname);
return (1);
} else {
sc->sc_device_type = 2;
}
return (0);
}
int
upgt_device_init(struct upgt_softc *sc)
{
struct upgt_data *data_cmd = &sc->cmd_data;
char init_cmd[] = { 0x7e, 0x7e, 0x7e, 0x7e };
int len;
len = sizeof(init_cmd);
bcopy(init_cmd, data_cmd->buf, len);
if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
printf("%s: could not send device init string!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
usbd_delay_ms(sc->sc_udev, 100);
DPRINTF(1, "%s: device initialized\n", sc->sc_dev.dv_xname);
return (0);
}
int
upgt_mem_init(struct upgt_softc *sc)
{
int i;
for (i = 0; i < UPGT_MEMORY_MAX_PAGES; i++) {
sc->sc_memory.page[i].used = 0;
if (i == 0) {
/*
* The first memory page is always reserved for
* command data.
*/
sc->sc_memory.page[i].addr =
sc->sc_memaddr_frame_start + MCLBYTES;
} else {
sc->sc_memory.page[i].addr =
sc->sc_memory.page[i - 1].addr + MCLBYTES;
}
if (sc->sc_memory.page[i].addr + MCLBYTES >=
sc->sc_memaddr_frame_end)
break;
DPRINTF(2, "%s: memory address page %d=0x%08x\n",
sc->sc_dev.dv_xname, i, sc->sc_memory.page[i].addr);
}
sc->sc_memory.pages = i;
DPRINTF(2, "%s: memory pages=%d\n",
sc->sc_dev.dv_xname, sc->sc_memory.pages);
return (0);
}
uint32_t
upgt_mem_alloc(struct upgt_softc *sc)
{
int i;
for (i = 0; i < sc->sc_memory.pages; i++) {
if (sc->sc_memory.page[i].used == 0) {
sc->sc_memory.page[i].used = 1;
return (sc->sc_memory.page[i].addr);
}
}
return (0);
}
void
upgt_mem_free(struct upgt_softc *sc, uint32_t addr)
{
int i;
for (i = 0; i < sc->sc_memory.pages; i++) {
if (sc->sc_memory.page[i].addr == addr) {
sc->sc_memory.page[i].used = 0;
return;
}
}
printf("%s: could not free memory address 0x%08x!\n",
sc->sc_dev.dv_xname, addr);
}
int
upgt_fw_alloc(struct upgt_softc *sc)
{
const char *name = "upgt-gw3887";
int error;
if (sc->sc_fw == NULL) {
error = loadfirmware(name, &sc->sc_fw, &sc->sc_fw_size);
if (error != 0) {
printf("%s: error %d, could not read firmware %s!\n",
sc->sc_dev.dv_xname, error, name);
return (EIO);
}
}
DPRINTF(1, "%s: firmware %s allocated\n", sc->sc_dev.dv_xname, name);
return (0);
}
void
upgt_fw_free(struct upgt_softc *sc)
{
if (sc->sc_fw != NULL) {
free(sc->sc_fw, M_DEVBUF);
sc->sc_fw = NULL;
DPRINTF(1, "%s: firmware freed\n", sc->sc_dev.dv_xname);
}
}
int
upgt_fw_verify(struct upgt_softc *sc)
{
struct upgt_fw_bra_option *bra_option;
uint32_t bra_option_type, bra_option_len;
uint32_t *uc;
int offset, bra_end = 0;
/*
* Seek to beginning of Boot Record Area (BRA).
*/
for (offset = 0; offset < sc->sc_fw_size; offset += sizeof(*uc)) {
uc = (uint32_t *)(sc->sc_fw + offset);
if (*uc == 0)
break;
}
for (; offset < sc->sc_fw_size; offset += sizeof(*uc)) {
uc = (uint32_t *)(sc->sc_fw + offset);
if (*uc != 0)
break;
}
if (offset == sc->sc_fw_size) {
printf("%s: firmware Boot Record Area not found!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
DPRINTF(1, "%s: firmware Boot Record Area found at offset %d\n",
sc->sc_dev.dv_xname, offset);
/*
* Parse Boot Record Area (BRA) options.
*/
while (offset < sc->sc_fw_size && bra_end == 0) {
/* get current BRA option */
bra_option = (struct upgt_fw_bra_option *)(sc->sc_fw + offset);
bra_option_type = letoh32(bra_option->type);
bra_option_len = letoh32(bra_option->len) * sizeof(*uc);
switch (bra_option_type) {
case UPGT_BRA_TYPE_FW:
DPRINTF(1, "%s: UPGT_BRA_TYPE_FW len=%d\n",
sc->sc_dev.dv_xname, bra_option_len);
if (bra_option_len != UPGT_BRA_FWTYPE_SIZE) {
printf("%s: wrong UPGT_BRA_TYPE_FW len!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
if (memcmp(UPGT_BRA_FWTYPE_LM86, bra_option->data,
bra_option_len) == 0) {
sc->sc_fw_type = UPGT_FWTYPE_LM86;
break;
}
if (memcmp(UPGT_BRA_FWTYPE_LM87, bra_option->data,
bra_option_len) == 0) {
sc->sc_fw_type = UPGT_FWTYPE_LM87;
break;
}
if (memcmp(UPGT_BRA_FWTYPE_FMAC, bra_option->data,
bra_option_len) == 0) {
sc->sc_fw_type = UPGT_FWTYPE_FMAC;
break;
}
printf("%s: unsupported firmware type!\n",
sc->sc_dev.dv_xname);
return (EIO);
case UPGT_BRA_TYPE_VERSION:
DPRINTF(1, "%s: UPGT_BRA_TYPE_VERSION len=%d\n",
sc->sc_dev.dv_xname, bra_option_len);
break;
case UPGT_BRA_TYPE_DEPIF:
DPRINTF(1, "%s: UPGT_BRA_TYPE_DEPIF len=%d\n",
sc->sc_dev.dv_xname, bra_option_len);
break;
case UPGT_BRA_TYPE_EXPIF:
DPRINTF(1, "%s: UPGT_BRA_TYPE_EXPIF len=%d\n",
sc->sc_dev.dv_xname, bra_option_len);
break;
case UPGT_BRA_TYPE_DESCR:
DPRINTF(1, "%s: UPGT_BRA_TYPE_DESCR len=%d\n",
sc->sc_dev.dv_xname, bra_option_len);
struct upgt_fw_bra_descr *descr =
(struct upgt_fw_bra_descr *)bra_option->data;
sc->sc_memaddr_frame_start =
letoh32(descr->memaddr_space_start);
sc->sc_memaddr_frame_end =
letoh32(descr->memaddr_space_end);
DPRINTF(2, "%s: memory address space start=0x%08x\n",
sc->sc_dev.dv_xname, sc->sc_memaddr_frame_start);
DPRINTF(2, "%s: memory address space end=0x%08x\n",
sc->sc_dev.dv_xname, sc->sc_memaddr_frame_end);
break;
case UPGT_BRA_TYPE_END:
DPRINTF(1, "%s: UPGT_BRA_TYPE_END len=%d\n",
sc->sc_dev.dv_xname, bra_option_len);
bra_end = 1;
break;
default:
DPRINTF(1, "%s: unknown BRA option len=%d\n",
sc->sc_dev.dv_xname, bra_option_len);
return (EIO);
}
/* jump to next BRA option */
offset += sizeof(struct upgt_fw_bra_option) + bra_option_len;
}
DPRINTF(1, "%s: firmware verified\n", sc->sc_dev.dv_xname);
return (0);
}
int
upgt_fw_load(struct upgt_softc *sc)
{
struct upgt_data *data_cmd = &sc->cmd_data;
struct upgt_data *data_rx = &sc->rx_data;
char start_fwload_cmd[] = { 0x3c, 0x0d };
int offset, bsize, n, i, len;
uint32_t crc32;
/* send firmware start load command */
len = sizeof(start_fwload_cmd);
bcopy(start_fwload_cmd, data_cmd->buf, len);
if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
printf("%s: could not send start_firmware_load command!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
/* send X2 header */
len = sizeof(struct upgt_fw_x2_header);
struct upgt_fw_x2_header *x2 = data_cmd->buf;
bcopy(UPGT_X2_SIGNATURE, x2->signature, UPGT_X2_SIGNATURE_SIZE);
x2->startaddr = htole32(UPGT_MEMADDR_FIRMWARE_START);
x2->len = htole32(sc->sc_fw_size);
x2->crc = upgt_crc32_le(data_cmd->buf + UPGT_X2_SIGNATURE_SIZE,
sizeof(struct upgt_fw_x2_header) - UPGT_X2_SIGNATURE_SIZE -
sizeof(uint32_t));
if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
printf("%s: could not send firmware X2 header!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
/* download firmware */
for (offset = 0; offset < sc->sc_fw_size; offset += bsize) {
if (sc->sc_fw_size - offset > UPGT_FW_BLOCK_SIZE)
bsize = UPGT_FW_BLOCK_SIZE;
else
bsize = sc->sc_fw_size - offset;
n = upgt_fw_copy(sc->sc_fw + offset, data_cmd->buf, bsize);
DPRINTF(1, "%s: FW offset=%d, read=%d, sent=%d\n",
sc->sc_dev.dv_xname, offset, n, bsize);
if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &bsize, 0)
!= 0) {
printf("%s: error while downloading firmware block!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
bsize = n;
}
DPRINTF(1, "%s: firmware downloaded\n", sc->sc_dev.dv_xname);
/* load firmware */
crc32 = upgt_crc32_le(sc->sc_fw, sc->sc_fw_size);
*((uint32_t *)(data_cmd->buf) ) = crc32;
*((uint8_t *)(data_cmd->buf) + 4) = 'g';
*((uint8_t *)(data_cmd->buf) + 5) = '\r';
len = 6;
if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
printf("%s: could not send load_firmware command!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
for (i = 0; i < UPGT_FIRMWARE_TIMEOUT; i++) {
len = UPGT_FW_BLOCK_SIZE;
bzero(data_rx->buf, MCLBYTES);
if (upgt_bulk_xmit(sc, data_rx, sc->sc_rx_pipeh, &len,
USBD_SHORT_XFER_OK) != 0) {
printf("%s: could not read firmware response!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
if (memcmp(data_rx->buf, "OK", 2) == 0)
break; /* firmware load was successful */
}
if (i == UPGT_FIRMWARE_TIMEOUT) {
printf("%s: firmware load failed!\n", sc->sc_dev.dv_xname);
return (EIO);
}
DPRINTF(1, "%s: firmware loaded\n", sc->sc_dev.dv_xname);
return (0);
}
/*
* While copying the version 2 firmware, we need to replace two characters:
*
* 0x7e -> 0x7d 0x5e
* 0x7d -> 0x7d 0x5d
*/
int
upgt_fw_copy(char *src, char *dst, int size)
{
int i, j;
for (i = 0, j = 0; i < size && j < size; i++) {
switch (src[i]) {
case 0x7e:
dst[j] = 0x7d;
j++;
dst[j] = 0x5e;
j++;
break;
case 0x7d:
dst[j] = 0x7d;
j++;
dst[j] = 0x5d;
j++;
break;
default:
dst[j] = src[i];
j++;
break;
}
}
return (i);
}
int
upgt_eeprom_read(struct upgt_softc *sc)
{
struct upgt_data *data_cmd = &sc->cmd_data;
struct upgt_lmac_mem *mem;
struct upgt_lmac_eeprom *eeprom;
int offset, block, len;
offset = 0;
block = UPGT_EEPROM_BLOCK_SIZE;
while (offset < UPGT_EEPROM_SIZE) {
DPRINTF(1, "%s: request EEPROM block (offset=%d, len=%d)\n",
sc->sc_dev.dv_xname, offset, block);
/*
* Transmit the URB containing the CMD data.
*/
bzero(data_cmd->buf, MCLBYTES);
mem = (struct upgt_lmac_mem *)data_cmd->buf;
mem->addr = htole32(sc->sc_memaddr_frame_start +
UPGT_MEMSIZE_FRAME_HEAD);
eeprom = (struct upgt_lmac_eeprom *)(mem + 1);
eeprom->header1.flags = 0;
eeprom->header1.type = UPGT_H1_TYPE_CTRL;
eeprom->header1.len = htole16((
sizeof(struct upgt_lmac_eeprom) -
sizeof(struct upgt_lmac_header)) + block);
eeprom->header2.reqid = htole32(sc->sc_memaddr_frame_start);
eeprom->header2.type = htole16(UPGT_H2_TYPE_EEPROM);
eeprom->header2.flags = 0;
eeprom->offset = htole16(offset);
eeprom->len = htole16(block);
len = sizeof(*mem) + sizeof(*eeprom) + block;
mem->chksum = upgt_chksum_le((uint32_t *)eeprom,
len - sizeof(*mem));
if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len,
USBD_FORCE_SHORT_XFER) != 0) {
printf("%s: could not transmit EEPROM data URB!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
if (tsleep(sc, 0, "eeprom_request", UPGT_USB_TIMEOUT)) {
printf("%s: timeout while waiting for EEPROM data!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
offset += block;
if (UPGT_EEPROM_SIZE - offset < block)
block = UPGT_EEPROM_SIZE - offset;
}
return (0);
}
int
upgt_eeprom_parse(struct upgt_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct upgt_eeprom_header *eeprom_header;
struct upgt_eeprom_option *eeprom_option;
uint16_t option_len;
uint16_t option_type;
uint16_t preamble_len;
int option_end = 0;
/* calculate eeprom options start offset */
eeprom_header = (struct upgt_eeprom_header *)sc->sc_eeprom;
preamble_len = letoh16(eeprom_header->preamble_len);
eeprom_option = (struct upgt_eeprom_option *)(sc->sc_eeprom +
(sizeof(struct upgt_eeprom_header) + preamble_len));
while (!option_end) {
/* the eeprom option length is stored in words */
option_len =
(letoh16(eeprom_option->len) - 1) * sizeof(uint16_t);
option_type =
letoh16(eeprom_option->type);
switch (option_type) {
case UPGT_EEPROM_TYPE_NAME:
DPRINTF(1, "%s: EEPROM name len=%d\n",
sc->sc_dev.dv_xname, option_len);
break;
case UPGT_EEPROM_TYPE_SERIAL:
DPRINTF(1, "%s: EEPROM serial len=%d\n",
sc->sc_dev.dv_xname, option_len);
break;
case UPGT_EEPROM_TYPE_MAC:
DPRINTF(1, "%s: EEPROM mac len=%d\n",
sc->sc_dev.dv_xname, option_len);
IEEE80211_ADDR_COPY(ic->ic_myaddr, eeprom_option->data);
break;
case UPGT_EEPROM_TYPE_HWRX:
DPRINTF(1, "%s: EEPROM hwrx len=%d\n",
sc->sc_dev.dv_xname, option_len);
upgt_eeprom_parse_hwrx(sc, eeprom_option->data);
break;
case UPGT_EEPROM_TYPE_CHIP:
DPRINTF(1, "%s: EEPROM chip len=%d\n",
sc->sc_dev.dv_xname, option_len);
break;
case UPGT_EEPROM_TYPE_FREQ3:
DPRINTF(1, "%s: EEPROM freq3 len=%d\n",
sc->sc_dev.dv_xname, option_len);
upgt_eeprom_parse_freq3(sc, eeprom_option->data,
option_len);
break;
case UPGT_EEPROM_TYPE_FREQ4:
DPRINTF(1, "%s: EEPROM freq4 len=%d\n",
sc->sc_dev.dv_xname, option_len);
upgt_eeprom_parse_freq4(sc, eeprom_option->data,
option_len);
break;
case UPGT_EEPROM_TYPE_FREQ5:
DPRINTF(1, "%s: EEPROM freq5 len=%d\n",
sc->sc_dev.dv_xname, option_len);
break;
case UPGT_EEPROM_TYPE_FREQ6:
DPRINTF(1, "%s: EEPROM freq6 len=%d\n",
sc->sc_dev.dv_xname, option_len);
upgt_eeprom_parse_freq6(sc, eeprom_option->data,
option_len);
break;
case UPGT_EEPROM_TYPE_END:
DPRINTF(1, "%s: EEPROM end len=%d\n",
sc->sc_dev.dv_xname, option_len);
option_end = 1;
break;
case UPGT_EEPROM_TYPE_OFF:
DPRINTF(1, "%s: EEPROM off without end option!\n",
sc->sc_dev.dv_xname);
return (EIO);
default:
DPRINTF(1, "%s: EEPROM unknown type 0x%04x len=%d\n",
sc->sc_dev.dv_xname, option_type, option_len);
break;
}
/* jump to next EEPROM option */
eeprom_option = (struct upgt_eeprom_option *)
(eeprom_option->data + option_len);
}
return (0);
}
void
upgt_eeprom_parse_hwrx(struct upgt_softc *sc, uint8_t *data)
{
struct upgt_eeprom_option_hwrx *option_hwrx;
option_hwrx = (struct upgt_eeprom_option_hwrx *)data;
sc->sc_eeprom_hwrx = option_hwrx->rxfilter - UPGT_EEPROM_RX_CONST;
DPRINTF(2, "%s: hwrx option value=0x%04x\n",
sc->sc_dev.dv_xname, sc->sc_eeprom_hwrx);
}
void
upgt_eeprom_parse_freq3(struct upgt_softc *sc, uint8_t *data, int len)
{
struct upgt_eeprom_freq3_header *freq3_header;
struct upgt_lmac_freq3 *freq3;
int i, elements, flags;
unsigned channel;
freq3_header = (struct upgt_eeprom_freq3_header *)data;
freq3 = (struct upgt_lmac_freq3 *)(freq3_header + 1);
flags = freq3_header->flags;
elements = freq3_header->elements;
DPRINTF(2, "%s: flags=0x%02x\n", sc->sc_dev.dv_xname, flags);
DPRINTF(2, "%s: elements=%d\n", sc->sc_dev.dv_xname, elements);
for (i = 0; i < elements; i++) {
channel = ieee80211_mhz2ieee(letoh16(freq3[i].freq), 0);
sc->sc_eeprom_freq3[channel] = freq3[i];
DPRINTF(2, "%s: frequence=%d, channel=%d\n",
sc->sc_dev.dv_xname,
letoh16(sc->sc_eeprom_freq3[channel].freq), channel);
}
}
void
upgt_eeprom_parse_freq4(struct upgt_softc *sc, uint8_t *data, int len)
{
struct upgt_eeprom_freq4_header *freq4_header;
struct upgt_eeprom_freq4_1 *freq4_1;
struct upgt_eeprom_freq4_2 *freq4_2;
int i, j, elements, settings, flags;
unsigned channel;
freq4_header = (struct upgt_eeprom_freq4_header *)data;
freq4_1 = (struct upgt_eeprom_freq4_1 *)(freq4_header + 1);
flags = freq4_header->flags;
elements = freq4_header->elements;
settings = freq4_header->settings;
/* we need this value later */
sc->sc_eeprom_freq6_settings = freq4_header->settings;
DPRINTF(2, "%s: flags=0x%02x\n", sc->sc_dev.dv_xname, flags);
DPRINTF(2, "%s: elements=%d\n", sc->sc_dev.dv_xname, elements);
DPRINTF(2, "%s: settings=%d\n", sc->sc_dev.dv_xname, settings);
for (i = 0; i < elements; i++) {
channel = ieee80211_mhz2ieee(letoh16(freq4_1[i].freq), 0);
freq4_2 = (struct upgt_eeprom_freq4_2 *)freq4_1[i].data;
for (j = 0; j < settings; j++) {
sc->sc_eeprom_freq4[channel][j].cmd = freq4_2[j];
sc->sc_eeprom_freq4[channel][j].pad = 0;
}
DPRINTF(2, "%s: frequence=%d, channel=%d\n",
sc->sc_dev.dv_xname,
letoh16(freq4_1[i].freq), channel);
}
}
void
upgt_eeprom_parse_freq6(struct upgt_softc *sc, uint8_t *data, int len)
{
struct upgt_lmac_freq6 *freq6;
int i, elements;
unsigned channel;
freq6 = (struct upgt_lmac_freq6 *)data;
elements = len / sizeof(struct upgt_lmac_freq6);
DPRINTF(2, "%s: elements=%d\n", sc->sc_dev.dv_xname, elements);
for (i = 0; i < elements; i++) {
channel = ieee80211_mhz2ieee(letoh16(freq6[i].freq), 0);
sc->sc_eeprom_freq6[channel] = freq6[i];
DPRINTF(2, "%s: frequence=%d, channel=%d\n",
sc->sc_dev.dv_xname,
letoh16(sc->sc_eeprom_freq6[channel].freq), channel);
}
}
int
upgt_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct upgt_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
struct ifaddr *ifa;
struct ifreq *ifr;
int s, error = 0;
uint8_t chan;
s = splnet();
switch (cmd) {
case SIOCSIFADDR:
ifa = (struct ifaddr *)data;
ifp->if_flags |= IFF_UP;
#ifdef INET
if (ifa->ifa_addr->sa_family == AF_INET)
arp_ifinit(&ic->ic_ac, ifa);
#endif
/* FALLTHROUGH */
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP) {
if ((ifp->if_flags & IFF_RUNNING) == 0)
upgt_init(ifp);
} else {
if (ifp->if_flags & IFF_RUNNING)
upgt_stop(sc);
}
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
ifr = (struct ifreq *)data;
error = (cmd == SIOCADDMULTI) ?
ether_addmulti(ifr, &ic->ic_ac) :
ether_delmulti(ifr, &ic->ic_ac);
if (error == ENETRESET)
error = 0;
break;
case SIOCS80211CHANNEL:
/* allow fast channel switching in monitor mode */
error = ieee80211_ioctl(ifp, cmd, data);
if (error == ENETRESET &&
ic->ic_opmode == IEEE80211_M_MONITOR) {
if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) ==
(IFF_UP | IFF_RUNNING)) {
ic->ic_bss->ni_chan = ic->ic_ibss_chan;
chan = ieee80211_chan2ieee(ic,
ic->ic_bss->ni_chan);
upgt_set_channel(sc, chan);
}
error = 0;
}
break;
default:
error = ieee80211_ioctl(ifp, cmd, data);
break;
}
if (error == ENETRESET) {
if (ifp->if_flags & (IFF_UP | IFF_RUNNING))
upgt_init(ifp);
error = 0;
}
splx(s);
return (error);
}
int
upgt_init(struct ifnet *ifp)
{
struct upgt_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
DPRINTF(1, "%s: %s\n", sc->sc_dev.dv_xname, __func__);
IEEE80211_ADDR_COPY(ic->ic_myaddr, LLADDR(ifp->if_sadl));
/* select default channel */
ic->ic_bss->ni_chan = ic->ic_ibss_chan;
sc->sc_cur_chan = ieee80211_chan2ieee(ic, ic->ic_bss->ni_chan);
/* setup device rates */
upgt_setup_rates(sc);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
upgt_set_macfilter(sc, IEEE80211_S_SCAN);
if (ic->ic_opmode == IEEE80211_M_MONITOR) {
upgt_set_channel(sc, sc->sc_cur_chan);
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
} else
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
return (0);
}
void
upgt_stop(struct upgt_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &ic->ic_if;
DPRINTF(1, "%s: %s\n", sc->sc_dev.dv_xname, __func__);
/* device down */
ifp->if_timer = 0;
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
/* change device back to initial state */
ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
}
int
upgt_media_change(struct ifnet *ifp)
{
struct upgt_softc *sc = ifp->if_softc;
int error;
DPRINTF(1, "%s: %s\n", sc->sc_dev.dv_xname, __func__);
if ((error = ieee80211_media_change(ifp) != ENETRESET))
return (error);
if (ifp->if_flags & (IFF_UP | IFF_RUNNING)) {
/* give pending USB transfers a chance to finish */
usbd_delay_ms(sc->sc_udev, 100);
upgt_init(ifp);
}
return (0);
}
void
upgt_newassoc(struct ieee80211com *ic, struct ieee80211_node *ni, int isnew)
{
ni->ni_txrate = 0;
}
int
upgt_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
{
struct upgt_softc *sc = ic->ic_if.if_softc;
usb_rem_task(sc->sc_udev, &sc->sc_task_newstate);
timeout_del(&sc->scan_to);
/* do it in a process context */
sc->sc_state = nstate;
sc->sc_arg = arg;
usb_add_task(sc->sc_udev, &sc->sc_task_newstate);
return (0);
}
void
upgt_newstate_task(void *arg)
{
struct upgt_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211_node *ni;
unsigned channel;
switch (sc->sc_state) {
case IEEE80211_S_INIT:
DPRINTF(1, "%s: newstate is IEEE80211_S_INIT\n",
sc->sc_dev.dv_xname);
/* do not accept any frames if the device is down */
upgt_set_macfilter(sc, IEEE80211_S_INIT);
upgt_set_led(sc, UPGT_LED_OFF);
break;
case IEEE80211_S_SCAN:
DPRINTF(1, "%s: newstate is IEEE80211_S_SCAN\n",
sc->sc_dev.dv_xname);
channel = ieee80211_chan2ieee(ic, ic->ic_bss->ni_chan);
upgt_set_channel(sc, channel);
timeout_add(&sc->scan_to, hz / 5);
break;
case IEEE80211_S_AUTH:
DPRINTF(1, "%s: newstate is IEEE80211_S_AUTH\n",
sc->sc_dev.dv_xname);
channel = ieee80211_chan2ieee(ic, ic->ic_bss->ni_chan);
upgt_set_channel(sc, channel);
break;
case IEEE80211_S_ASSOC:
DPRINTF(1, "%s: newstate is IEEE80211_S_ASSOC\n",
sc->sc_dev.dv_xname);
break;
case IEEE80211_S_RUN:
DPRINTF(1, "%s: newstate is IEEE80211_S_RUN\n",
sc->sc_dev.dv_xname);
ni = ic->ic_bss;
/*
* TX rate control is done by the firmware.
* Report the maximum rate which is available therefore.
*/
ni->ni_txrate = ni->ni_rates.rs_nrates - 1;
if (ic->ic_opmode != IEEE80211_M_MONITOR)
upgt_set_macfilter(sc, IEEE80211_S_RUN);
upgt_set_led(sc, UPGT_LED_ON);
break;
}
sc->sc_newstate(ic, sc->sc_state, sc->sc_arg);
}
void
upgt_next_scan(void *arg)
{
struct upgt_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &ic->ic_if;
DPRINTF(2, "%s: %s\n", sc->sc_dev.dv_xname, __func__);
if (ic->ic_state == IEEE80211_S_SCAN)
ieee80211_next_scan(ifp);
}
void
upgt_start(struct ifnet *ifp)
{
struct upgt_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211_node *ni;
struct mbuf *m;
int i;
/* don't transmit packets if interface is busy or down */
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
return;
DPRINTF(2, "%s: %s\n", sc->sc_dev.dv_xname, __func__);
for (i = 0; i < UPGT_TX_COUNT; i++) {
struct upgt_data *data_tx = &sc->tx_data[i];
IF_POLL(&ic->ic_mgtq, m);
if (m != NULL) {
/* management frame */
IF_DEQUEUE(&ic->ic_mgtq, m);
ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
m->m_pkthdr.rcvif = NULL;
#if NBPFILTER > 0
if (ic->ic_rawbpf != NULL)
bpf_mtap(ic->ic_rawbpf, m, BPF_DIRECTION_OUT);
#endif
if ((data_tx->addr = upgt_mem_alloc(sc)) == 0) {
printf("%s: no free prism memory!\n",
sc->sc_dev.dv_xname);
return;
}
data_tx->ni = ni;
data_tx->m = m;
sc->tx_queued++;
} else {
/* data frame */
if (ic->ic_state != IEEE80211_S_RUN)
break;
IFQ_POLL(&ifp->if_snd, m);
if (m == NULL)
break;
IFQ_DEQUEUE(&ifp->if_snd, m);
#if NBPFILTER > 0
if (ifp->if_bpf != NULL)
bpf_mtap(ifp->if_bpf, m, BPF_DIRECTION_OUT);
#endif
m = ieee80211_encap(ifp, m, &ni);
if (m == NULL)
continue;
#if NBPFILTER > 0
if (ic->ic_rawbpf != NULL)
bpf_mtap(ic->ic_rawbpf, m, BPF_DIRECTION_OUT);
#endif
if ((data_tx->addr = upgt_mem_alloc(sc)) == 0) {
printf("%s: no free prism memory!\n",
sc->sc_dev.dv_xname);
return;
}
data_tx->ni = ni;
data_tx->m = m;
sc->tx_queued++;
}
}
if (sc->tx_queued > 0) {
DPRINTF(2, "%s: tx_queued=%d\n",
sc->sc_dev.dv_xname, sc->tx_queued);
/* process the TX queue in process context */
ifp->if_timer = 5;
ifp->if_flags |= IFF_OACTIVE;
usb_rem_task(sc->sc_udev, &sc->sc_task_tx);
usb_add_task(sc->sc_udev, &sc->sc_task_tx);
}
}
void
upgt_watchdog(struct ifnet *ifp)
{
struct upgt_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
if (ic->ic_state == IEEE80211_S_INIT)
return;
printf("%s: watchdog timeout!\n", sc->sc_dev.dv_xname);
/* TODO: what shall we do on TX timeout? */
ieee80211_watchdog(ifp);
}
void
upgt_tx_task(void *arg)
{
struct upgt_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211_frame *wh;
struct ieee80211_key *k;
struct upgt_lmac_mem *mem;
struct upgt_lmac_tx_desc *txdesc;
struct mbuf *m;
uint32_t addr;
int len, i, s;
usbd_status error;
s = splusb();
upgt_set_led(sc, UPGT_LED_BLINK);
for (i = 0; i < UPGT_TX_COUNT; i++) {
struct upgt_data *data_tx = &sc->tx_data[i];
if (data_tx->m == NULL) {
DPRINTF(2, "%s: %d: m is NULL\n",
sc->sc_dev.dv_xname, i);
continue;
}
m = data_tx->m;
addr = data_tx->addr + UPGT_MEMSIZE_FRAME_HEAD;
/*
* Software crypto.
*/
wh = mtod(m, struct ieee80211_frame *);
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
k = ieee80211_get_txkey(ic, wh, ic->ic_bss);
if ((m = ieee80211_encrypt(ic, m, k)) == NULL)
return;
/* in case packet header moved, reset pointer */
wh = mtod(m, struct ieee80211_frame *);
}
/*
* Transmit the URB containing the TX data.
*/
bzero(data_tx->buf, MCLBYTES);
mem = (struct upgt_lmac_mem *)data_tx->buf;
mem->addr = htole32(addr);
txdesc = (struct upgt_lmac_tx_desc *)(mem + 1);
/* XXX differ between data and mgmt frames? */
txdesc->header1.flags = UPGT_H1_FLAGS_TX_DATA;
txdesc->header1.type = UPGT_H1_TYPE_TX_DATA;
txdesc->header1.len = htole16(m->m_pkthdr.len);
txdesc->header2.reqid = htole32(data_tx->addr);
txdesc->header2.type = htole16(UPGT_H2_TYPE_TX_ACK_YES);
txdesc->header2.flags = htole16(UPGT_H2_FLAGS_TX_ACK_YES);
if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) ==
IEEE80211_FC0_TYPE_MGT) {
/* always send mgmt frames at lowest rate (DS1) */
memset(txdesc->rates, 0x10, sizeof(txdesc->rates));
} else {
bcopy(sc->sc_cur_rateset, txdesc->rates,
sizeof(txdesc->rates));
}
txdesc->type = htole32(UPGT_TX_DESC_TYPE_DATA);
txdesc->pad3[0] = UPGT_TX_DESC_PAD3_SIZE;
#if NBPFILTER > 0
if (sc->sc_drvbpf != NULL) {
struct mbuf mb;
struct upgt_tx_radiotap_header *tap = &sc->sc_txtap;
tap->wt_flags = 0;
tap->wt_rate = 0; /* TODO: where to get from? */
tap->wt_chan_freq =
htole16(ic->ic_bss->ni_chan->ic_freq);
tap->wt_chan_flags =
htole16(ic->ic_bss->ni_chan->ic_flags);
mb.m_data = (caddr_t)tap;
mb.m_len = sc->sc_txtap_len;
mb.m_next = m;
mb.m_nextpkt = NULL;
mb.m_type = 0;
mb.m_flags = 0;
bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_OUT);
}
#endif
/* copy frame below our TX descriptor header */
m_copydata(m, 0, m->m_pkthdr.len,
data_tx->buf + (sizeof(*mem) + sizeof(*txdesc)));
/* calculate frame size */
len = sizeof(*mem) + sizeof(*txdesc) + m->m_pkthdr.len;
/* we need to align the frame to a 4 byte boundary */
len = (len + 3) & ~3;
/* calculate frame checksum */
mem->chksum = upgt_chksum_le((uint32_t *)txdesc,
len - sizeof(*mem));
/* we do not need the mbuf anymore */
m_freem(m);
data_tx->m = NULL;
DPRINTF(2, "%s: TX start data sending\n", sc->sc_dev.dv_xname);
usbd_setup_xfer(data_tx->xfer, sc->sc_tx_pipeh, data_tx,
data_tx->buf, len, USBD_FORCE_SHORT_XFER | USBD_NO_COPY,
UPGT_USB_TIMEOUT, NULL);
error = usbd_transfer(data_tx->xfer);
if (error != 0 && error != USBD_IN_PROGRESS) {
printf("%s: could not transmit TX data URB!\n",
sc->sc_dev.dv_xname);
return;
}
DPRINTF(2, "%s: TX sent (%d bytes)\n",
sc->sc_dev.dv_xname, len);
}
/*
* If we don't regulary read the device statistics, the RX queue
* will stall. It's strange, but it works, so we keep reading
* the statistics here. *shrug*
*/
upgt_get_stats(sc);
splx(s);
}
void
upgt_tx_done(struct upgt_softc *sc, uint8_t *data)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &ic->ic_if;
struct upgt_lmac_tx_done_desc *desc;
int i, s;
s = splnet();
desc = (struct upgt_lmac_tx_done_desc *)data;
for (i = 0; i < UPGT_TX_COUNT; i++) {
struct upgt_data *data_tx = &sc->tx_data[i];
if (data_tx->addr == letoh32(desc->header2.reqid)) {
upgt_mem_free(sc, data_tx->addr);
ieee80211_release_node(ic, data_tx->ni);
data_tx->ni = NULL;
data_tx->addr = 0;
sc->tx_queued--;
ifp->if_opackets++;
DPRINTF(2, "%s: TX done: ", sc->sc_dev.dv_xname);
DPRINTF(2, "memaddr=0x%08x, status=0x%04x, rssi=%d, ",
letoh32(desc->header2.reqid),
letoh16(desc->status),
letoh16(desc->rssi));
DPRINTF(2, "seq=%d\n", letoh16(desc->seq));
break;
}
}
if (sc->tx_queued == 0) {
/* TX queued was processed, continue */
ifp->if_timer = 0;
ifp->if_flags &= ~IFF_OACTIVE;
upgt_start(ifp);
}
splx(s);
}
void
upgt_rx_cb(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
{
struct upgt_data *data_rx = priv;
struct upgt_softc *sc = data_rx->sc;
int len;
struct upgt_lmac_header *header;
struct upgt_lmac_eeprom *eeprom;
uint8_t h1_type;
uint16_t h2_type;
DPRINTF(3, "%s: %s\n", sc->sc_dev.dv_xname, __func__);
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
return;
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->sc_rx_pipeh);
goto skip;
}
usbd_get_xfer_status(xfer, NULL, NULL, &len, NULL);
/*
* Check what type of frame came in.
*/
header = (struct upgt_lmac_header *)(data_rx->buf + 4);
h1_type = header->header1.type;
h2_type = letoh16(header->header2.type);
if (h1_type == UPGT_H1_TYPE_CTRL &&
h2_type == UPGT_H2_TYPE_EEPROM) {
eeprom = (struct upgt_lmac_eeprom *)(data_rx->buf + 4);
uint16_t eeprom_offset = letoh16(eeprom->offset);
uint16_t eeprom_len = letoh16(eeprom->len);
DPRINTF(2, "%s: received EEPROM block (offset=%d, len=%d)\n",
sc->sc_dev.dv_xname, eeprom_offset, eeprom_len);
bcopy(data_rx->buf + sizeof(struct upgt_lmac_eeprom) + 4,
sc->sc_eeprom + eeprom_offset, eeprom_len);
/* EEPROM data has arrived in time, wakeup tsleep() */
wakeup(sc);
} else
if (h1_type == UPGT_H1_TYPE_CTRL &&
h2_type == UPGT_H2_TYPE_TX_DONE) {
DPRINTF(2, "%s: received 802.11 TX done\n",
sc->sc_dev.dv_xname);
upgt_tx_done(sc, data_rx->buf + 4);
} else
if (h1_type == UPGT_H1_TYPE_RX_DATA ||
h1_type == UPGT_H1_TYPE_RX_DATA_MGMT) {
DPRINTF(3, "%s: received 802.11 RX data\n",
sc->sc_dev.dv_xname);
upgt_rx(sc, data_rx->buf + 4, letoh16(header->header1.len));
} else
if (h1_type == UPGT_H1_TYPE_CTRL &&
h2_type == UPGT_H2_TYPE_STATS) {
DPRINTF(2, "%s: received statistic data\n",
sc->sc_dev.dv_xname);
/* TODO: what could we do with the statistic data? */
} else {
/* ignore unknown frame types */
DPRINTF(1, "%s: received unknown frame type 0x%02x\n",
sc->sc_dev.dv_xname, header->header1.type);
}
skip: /* setup new transfer */
usbd_setup_xfer(xfer, sc->sc_rx_pipeh, data_rx, data_rx->buf, MCLBYTES,
USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, upgt_rx_cb);
(void)usbd_transfer(xfer);
}
void
upgt_rx(struct upgt_softc *sc, uint8_t *data, int pkglen)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &ic->ic_if;
struct upgt_lmac_rx_desc *rxdesc;
struct ieee80211_frame *wh;
struct ieee80211_rxinfo rxi;
struct ieee80211_node *ni;
struct mbuf *m;
int s;
/* access RX packet descriptor */
rxdesc = (struct upgt_lmac_rx_desc *)data;
/* create mbuf which is suitable for strict alignment archs */
m = m_devget(rxdesc->data, pkglen, ETHER_ALIGN, ifp, NULL);
if (m == NULL) {
DPRINTF(1, "%s: could not create RX mbuf!\n", sc->sc_dev.dv_xname);
ifp->if_ierrors++;
return;
}
s = splnet();
#if NBPFILTER > 0
if (sc->sc_drvbpf != NULL) {
struct mbuf mb;
struct upgt_rx_radiotap_header *tap = &sc->sc_rxtap;
tap->wr_flags = IEEE80211_RADIOTAP_F_FCS;
tap->wr_rate = upgt_rx_rate(sc, rxdesc->rate);
tap->wr_chan_freq = htole16(ic->ic_bss->ni_chan->ic_freq);
tap->wr_chan_flags = htole16(ic->ic_bss->ni_chan->ic_flags);
tap->wr_antsignal = rxdesc->rssi;
mb.m_data = (caddr_t)tap;
mb.m_len = sc->sc_rxtap_len;
mb.m_next = m;
mb.m_nextpkt = NULL;
mb.m_type = 0;
mb.m_flags = 0;
bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_IN);
}
#endif
/* trim FCS */
m_adj(m, -IEEE80211_CRC_LEN);
wh = mtod(m, struct ieee80211_frame *);
ni = ieee80211_find_rxnode(ic, wh);
/* push the frame up to the 802.11 stack */
rxi.rxi_flags = 0;
rxi.rxi_rssi = rxdesc->rssi;
rxi.rxi_tstamp = 0; /* unused */
ieee80211_input(ifp, m, ni, &rxi);
/* node is no longer needed */
ieee80211_release_node(ic, ni);
splx(s);
DPRINTF(3, "%s: RX done\n", sc->sc_dev.dv_xname);
}
void
upgt_setup_rates(struct upgt_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
/*
* 0x01 = OFMD6 0x10 = DS1
* 0x04 = OFDM9 0x11 = DS2
* 0x06 = OFDM12 0x12 = DS5
* 0x07 = OFDM18 0x13 = DS11
* 0x08 = OFDM24
* 0x09 = OFDM36
* 0x0a = OFDM48
* 0x0b = OFDM54
*/
const uint8_t rateset_auto_11b[] =
{ 0x13, 0x13, 0x12, 0x11, 0x11, 0x10, 0x10, 0x10 };
const uint8_t rateset_auto_11g[] =
{ 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06, 0x04, 0x01 };
const uint8_t rateset_fix_11bg[] =
{ 0x10, 0x11, 0x12, 0x13, 0x01, 0x04, 0x06, 0x07,
0x08, 0x09, 0x0a, 0x0b };
if (ic->ic_fixed_rate == -1) {
/*
* Automatic rate control is done by the device.
* We just pass the rateset from which the device
* will pickup a rate.
*/
if (ic->ic_curmode == IEEE80211_MODE_11B)
bcopy(rateset_auto_11b, sc->sc_cur_rateset,
sizeof(sc->sc_cur_rateset));
if (ic->ic_curmode == IEEE80211_MODE_11G ||
ic->ic_curmode == IEEE80211_MODE_AUTO)
bcopy(rateset_auto_11g, sc->sc_cur_rateset,
sizeof(sc->sc_cur_rateset));
} else {
/* set a fixed rate */
memset(sc->sc_cur_rateset, rateset_fix_11bg[ic->ic_fixed_rate],
sizeof(sc->sc_cur_rateset));
}
}
uint8_t
upgt_rx_rate(struct upgt_softc *sc, const int rate)
{
struct ieee80211com *ic = &sc->sc_ic;
if (ic->ic_curmode == IEEE80211_MODE_11B) {
if (rate < 0 || rate > 3)
/* invalid rate */
return (0);
switch (rate) {
case 0:
return (2);
case 1:
return (4);
case 2:
return (11);
case 3:
return (22);
default:
return (0);
}
}
if (ic->ic_curmode == IEEE80211_MODE_11G) {
if (rate < 0 || rate > 11)
/* invalid rate */
return (0);
switch (rate) {
case 0:
return (2);
case 1:
return (4);
case 2:
return (11);
case 3:
return (22);
case 4:
return (12);
case 5:
return (18);
case 6:
return (24);
case 7:
return (36);
case 8:
return (48);
case 9:
return (72);
case 10:
return (96);
case 11:
return (108);
default:
return (0);
}
}
return (0);
}
int
upgt_set_macfilter(struct upgt_softc *sc, uint8_t state)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211_node *ni = ic->ic_bss;
struct upgt_data *data_cmd = &sc->cmd_data;
struct upgt_lmac_mem *mem;
struct upgt_lmac_filter *filter;
int len;
uint8_t broadcast[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
/*
* Transmit the URB containing the CMD data.
*/
bzero(data_cmd->buf, MCLBYTES);
mem = (struct upgt_lmac_mem *)data_cmd->buf;
mem->addr = htole32(sc->sc_memaddr_frame_start +
UPGT_MEMSIZE_FRAME_HEAD);
filter = (struct upgt_lmac_filter *)(mem + 1);
filter->header1.flags = UPGT_H1_FLAGS_TX_NO_CALLBACK;
filter->header1.type = UPGT_H1_TYPE_CTRL;
filter->header1.len = htole16(
sizeof(struct upgt_lmac_filter) -
sizeof(struct upgt_lmac_header));
filter->header2.reqid = htole32(sc->sc_memaddr_frame_start);
filter->header2.type = htole16(UPGT_H2_TYPE_MACFILTER);
filter->header2.flags = 0;
switch (state) {
case IEEE80211_S_INIT:
DPRINTF(1, "%s: set MAC filter to INIT\n",
sc->sc_dev.dv_xname);
filter->type = htole16(UPGT_FILTER_TYPE_RESET);
break;
case IEEE80211_S_SCAN:
DPRINTF(1, "%s: set MAC filter to SCAN (bssid %s)\n",
sc->sc_dev.dv_xname, ether_sprintf(broadcast));
filter->type = htole16(UPGT_FILTER_TYPE_NONE);
IEEE80211_ADDR_COPY(filter->dst, ic->ic_myaddr);
IEEE80211_ADDR_COPY(filter->src, broadcast);
filter->unknown1 = htole16(UPGT_FILTER_UNKNOWN1);
filter->rxaddr = htole32(sc->sc_memaddr_rx_start);
filter->unknown2 = htole16(UPGT_FILTER_UNKNOWN2);
filter->rxhw = htole32(sc->sc_eeprom_hwrx);
filter->unknown3 = htole16(UPGT_FILTER_UNKNOWN3);
break;
case IEEE80211_S_RUN:
DPRINTF(1, "%s: set MAC filter to RUN (bssid %s)\n",
sc->sc_dev.dv_xname, ether_sprintf(ni->ni_bssid));
filter->type = htole16(UPGT_FILTER_TYPE_STA);
IEEE80211_ADDR_COPY(filter->dst, ic->ic_myaddr);
IEEE80211_ADDR_COPY(filter->src, ni->ni_bssid);
filter->unknown1 = htole16(UPGT_FILTER_UNKNOWN1);
filter->rxaddr = htole32(sc->sc_memaddr_rx_start);
filter->unknown2 = htole16(UPGT_FILTER_UNKNOWN2);
filter->rxhw = htole32(sc->sc_eeprom_hwrx);
filter->unknown3 = htole16(UPGT_FILTER_UNKNOWN3);
break;
default:
printf("%s: MAC filter does not know that state!\n",
sc->sc_dev.dv_xname);
break;
}
len = sizeof(*mem) + sizeof(*filter);
mem->chksum = upgt_chksum_le((uint32_t *)filter,
len - sizeof(*mem));
if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
printf("%s: could not transmit macfilter CMD data URB!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
return (0);
}
int
upgt_set_channel(struct upgt_softc *sc, unsigned channel)
{
struct upgt_data *data_cmd = &sc->cmd_data;
struct upgt_lmac_mem *mem;
struct upgt_lmac_channel *chan;
int len;
DPRINTF(1, "%s: %s: %d\n", sc->sc_dev.dv_xname, __func__, channel);
/*
* Transmit the URB containing the CMD data.
*/
bzero(data_cmd->buf, MCLBYTES);
mem = (struct upgt_lmac_mem *)data_cmd->buf;
mem->addr = htole32(sc->sc_memaddr_frame_start +
UPGT_MEMSIZE_FRAME_HEAD);
chan = (struct upgt_lmac_channel *)(mem + 1);
chan->header1.flags = UPGT_H1_FLAGS_TX_NO_CALLBACK;
chan->header1.type = UPGT_H1_TYPE_CTRL;
chan->header1.len = htole16(
sizeof(struct upgt_lmac_channel) -
sizeof(struct upgt_lmac_header));
chan->header2.reqid = htole32(sc->sc_memaddr_frame_start);
chan->header2.type = htole16(UPGT_H2_TYPE_CHANNEL);
chan->header2.flags = 0;
chan->unknown1 = htole16(UPGT_CHANNEL_UNKNOWN1);
chan->unknown2 = htole16(UPGT_CHANNEL_UNKNOWN2);
chan->freq6 = sc->sc_eeprom_freq6[channel];
chan->settings = sc->sc_eeprom_freq6_settings;
chan->unknown3 = UPGT_CHANNEL_UNKNOWN3;
bcopy(&sc->sc_eeprom_freq3[channel].data, chan->freq3_1,
sizeof(chan->freq3_1));
bcopy(&sc->sc_eeprom_freq4[channel], chan->freq4,
sizeof(sc->sc_eeprom_freq4[channel]));
bcopy(&sc->sc_eeprom_freq3[channel].data, chan->freq3_2,
sizeof(chan->freq3_2));
len = sizeof(*mem) + sizeof(*chan);
mem->chksum = upgt_chksum_le((uint32_t *)chan,
len - sizeof(*mem));
if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
printf("%s: could not transmit channel CMD data URB!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
return (0);
}
void
upgt_set_led(struct upgt_softc *sc, int action)
{
struct ieee80211com *ic = &sc->sc_ic;
struct upgt_data *data_cmd = &sc->cmd_data;
struct upgt_lmac_mem *mem;
struct upgt_lmac_led *led;
struct timeval t;
int len;
/*
* Transmit the URB containing the CMD data.
*/
bzero(data_cmd->buf, MCLBYTES);
mem = (struct upgt_lmac_mem *)data_cmd->buf;
mem->addr = htole32(sc->sc_memaddr_frame_start +
UPGT_MEMSIZE_FRAME_HEAD);
led = (struct upgt_lmac_led *)(mem + 1);
led->header1.flags = UPGT_H1_FLAGS_TX_NO_CALLBACK;
led->header1.type = UPGT_H1_TYPE_CTRL;
led->header1.len = htole16(
sizeof(struct upgt_lmac_led) -
sizeof(struct upgt_lmac_header));
led->header2.reqid = htole32(sc->sc_memaddr_frame_start);
led->header2.type = htole16(UPGT_H2_TYPE_LED);
led->header2.flags = 0;
switch (action) {
case UPGT_LED_OFF:
led->mode = htole16(UPGT_LED_MODE_SET);
led->action_fix = 0;
led->action_tmp = htole16(UPGT_LED_ACTION_OFF);
led->action_tmp_dur = 0;
break;
case UPGT_LED_ON:
led->mode = htole16(UPGT_LED_MODE_SET);
led->action_fix = 0;
led->action_tmp = htole16(UPGT_LED_ACTION_ON);
led->action_tmp_dur = 0;
break;
case UPGT_LED_BLINK:
if (ic->ic_state != IEEE80211_S_RUN)
return;
if (sc->sc_led_blink)
/* previous blink was not finished */
return;
led->mode = htole16(UPGT_LED_MODE_SET);
led->action_fix = htole16(UPGT_LED_ACTION_OFF);
led->action_tmp = htole16(UPGT_LED_ACTION_ON);
led->action_tmp_dur = htole16(UPGT_LED_ACTION_TMP_DUR);
/* lock blink */
sc->sc_led_blink = 1;
t.tv_sec = 0;
t.tv_usec = UPGT_LED_ACTION_TMP_DUR * 1000L;
timeout_add(&sc->led_to, tvtohz(&t));
break;
default:
return;
}
len = sizeof(*mem) + sizeof(*led);
mem->chksum = upgt_chksum_le((uint32_t *)led,
len - sizeof(*mem));
if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
printf("%s: could not transmit led CMD URB!\n",
sc->sc_dev.dv_xname);
}
}
void
upgt_set_led_blink(void *arg)
{
struct upgt_softc *sc = arg;
/* blink finished, we are ready for a next one */
sc->sc_led_blink = 0;
timeout_del(&sc->led_to);
}
int
upgt_get_stats(struct upgt_softc *sc)
{
struct upgt_data *data_cmd = &sc->cmd_data;
struct upgt_lmac_mem *mem;
struct upgt_lmac_stats *stats;
int len;
/*
* Transmit the URB containing the CMD data.
*/
bzero(data_cmd->buf, MCLBYTES);
mem = (struct upgt_lmac_mem *)data_cmd->buf;
mem->addr = htole32(sc->sc_memaddr_frame_start +
UPGT_MEMSIZE_FRAME_HEAD);
stats = (struct upgt_lmac_stats *)(mem + 1);
stats->header1.flags = 0;
stats->header1.type = UPGT_H1_TYPE_CTRL;
stats->header1.len = htole16(
sizeof(struct upgt_lmac_stats) -
sizeof(struct upgt_lmac_header));
stats->header2.reqid = htole32(sc->sc_memaddr_frame_start);
stats->header2.type = htole16(UPGT_H2_TYPE_STATS);
stats->header2.flags = 0;
len = sizeof(*mem) + sizeof(*stats);
mem->chksum = upgt_chksum_le((uint32_t *)stats,
len - sizeof(*mem));
if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
printf("%s: could not transmit statistics CMD data URB!\n",
sc->sc_dev.dv_xname);
return (EIO);
}
return (0);
}
int
upgt_alloc_tx(struct upgt_softc *sc)
{
int i;
sc->tx_queued = 0;
for (i = 0; i < UPGT_TX_COUNT; i++) {
struct upgt_data *data_tx = &sc->tx_data[i];
data_tx->sc = sc;
data_tx->xfer = usbd_alloc_xfer(sc->sc_udev);
if (data_tx->xfer == NULL) {
printf("%s: could not allocate TX xfer!\n",
sc->sc_dev.dv_xname);
return (ENOMEM);
}
data_tx->buf = usbd_alloc_buffer(data_tx->xfer, MCLBYTES);
if (data_tx->buf == NULL) {
printf("%s: could not allocate TX buffer!\n",
sc->sc_dev.dv_xname);
return (ENOMEM);
}
bzero(data_tx->buf, MCLBYTES);
}
return (0);
}
int
upgt_alloc_rx(struct upgt_softc *sc)
{
struct upgt_data *data_rx = &sc->rx_data;
data_rx->sc = sc;
data_rx->xfer = usbd_alloc_xfer(sc->sc_udev);
if (data_rx->xfer == NULL) {
printf("%s: could not allocate RX xfer!\n",
sc->sc_dev.dv_xname);
return (ENOMEM);
}
data_rx->buf = usbd_alloc_buffer(data_rx->xfer, MCLBYTES);
if (data_rx->buf == NULL) {
printf("%s: could not allocate RX buffer!\n",
sc->sc_dev.dv_xname);
return (ENOMEM);
}
bzero(data_rx->buf, MCLBYTES);
return (0);
}
int
upgt_alloc_cmd(struct upgt_softc *sc)
{
struct upgt_data *data_cmd = &sc->cmd_data;
data_cmd->sc = sc;
data_cmd->xfer = usbd_alloc_xfer(sc->sc_udev);
if (data_cmd->xfer == NULL) {
printf("%s: could not allocate RX xfer!\n",
sc->sc_dev.dv_xname);
return (ENOMEM);
}
data_cmd->buf = usbd_alloc_buffer(data_cmd->xfer, MCLBYTES);
if (data_cmd->buf == NULL) {
printf("%s: could not allocate RX buffer!\n",
sc->sc_dev.dv_xname);
return (ENOMEM);
}
bzero(data_cmd->buf, MCLBYTES);
return (0);
}
void
upgt_free_tx(struct upgt_softc *sc)
{
int i;
for (i = 0; i < UPGT_TX_COUNT; i++) {
struct upgt_data *data_tx = &sc->tx_data[i];
if (data_tx->xfer != NULL) {
usbd_free_xfer(data_tx->xfer);
data_tx->xfer = NULL;
}
data_tx->ni = NULL;
}
}
void
upgt_free_rx(struct upgt_softc *sc)
{
struct upgt_data *data_rx = &sc->rx_data;
if (data_rx->xfer != NULL) {
usbd_free_xfer(data_rx->xfer);
data_rx->xfer = NULL;
}
data_rx->ni = NULL;
}
void
upgt_free_cmd(struct upgt_softc *sc)
{
struct upgt_data *data_cmd = &sc->cmd_data;
if (data_cmd->xfer != NULL) {
usbd_free_xfer(data_cmd->xfer);
data_cmd->xfer = NULL;
}
}
int
upgt_bulk_xmit(struct upgt_softc *sc, struct upgt_data *data,
usbd_pipe_handle pipeh, uint32_t *size, int flags)
{
usbd_status status;
status = usbd_bulk_transfer(data->xfer, pipeh,
USBD_NO_COPY | flags, UPGT_USB_TIMEOUT, data->buf, size,
"upgt_bulk_xmit");
if (status != USBD_NORMAL_COMPLETION) {
printf("%s: %s: error %s!\n",
sc->sc_dev.dv_xname, __func__, usbd_errstr(status));
return (EIO);
}
return (0);
}
void
upgt_hexdump(void *buf, int len)
{
int i;
for (i = 0; i < len; i++) {
if (i % 16 == 0)
printf("%s%5i:", i ? "\n" : "", i);
if (i % 4 == 0)
printf(" ");
printf("%02x", (int)*((u_char *)buf + i));
}
printf("\n");
}
uint32_t
upgt_crc32_le(const void *buf, size_t size)
{
uint32_t crc;
crc = ether_crc32_le(buf, size);
/* apply final XOR value as common for CRC-32 */
crc = htole32(crc ^ 0xffffffffU);
return (crc);
}
/*
* The firmware awaits a checksum for each frame we send to it.
* The algorithm used therefor is uncommon but somehow similar to CRC32.
*/
uint32_t
upgt_chksum_le(const uint32_t *buf, size_t size)
{
int i;
uint32_t crc = 0;
for (i = 0; i < size; i += sizeof(uint32_t)) {
crc = htole32(crc ^ *buf++);
crc = htole32((crc >> 5) ^ (crc << 3));
}
return (crc);
}