OpenBSD-4.6/usr.bin/vi/catalog/english

VI_MESSAGE_CATALOG
Line length overflowX
unable to delete line %luX
unable to append to line %luX
unable to insert at line %luX
unable to store line %luX
unable to get last lineX
Error: unable to retrieve line %luX
Log fileX
Logging not being performed, undo not possibleX
No changes to undoX
Logging not being performed, undo not possibleX
Logging not being performed, roll-forward not possibleX
No changes to re-doX
%s/%d: log put errorX
Vi's standard input and output must be a terminalX
Mark %s: not setX
Mark %s: the line was deletedX
Mark %s: cursor position no longer existsX
Error: X
new fileX
name changedX
modifiedX
unmodifiedX
UNLOCKEDX
readonlyX
line %lu of %lu [%ld%%]X
empty fileX
line %luX
The file %s is not a message catalogX
Unable to set default %s optionX
Usage: %sX
set: no %s option: 'set all' gives all option valuesX
set: [no]%s option doesn't take a valueX
set: %s option isn't a booleanX
set: %s option: %sX
set: %s option: %s: value overflowX
set: %s option: %s is an illegal numberX
set: %s option isn't a booleanX
Screen columns too small, less than %dX
Screen columns too large, greater than %dX
Screen lines too small, less than %dX
Screen lines too large, greater than %dX
The lisp option is not implementedX
messages not turned off: %sX
messages not turned on: %sX

The paragraph option must be in two character groupsX
The section option must be in two character groupsX



The default buffer is emptyX
Buffer %s is emptyX
Files with newlines in the name are unrecoverableX
Modifications not recoverable if the session failsX
Copying file for recovery...X
Preservation failed: %sX
Modifications not recoverable if the session failsX
File backup failed: %sX
Copying file for recovery...X
Information on user id %u not foundX
Unable to lock recovery fileX
Recovery file buffer overrunX
Recovery fileX
%s: malformed recovery fileX
%s: malformed recovery fileX
No files named %s, readable by you, to recoverX
There are older versions of this file for you to recoverX
There are other files for you to recoverX
not sending email: %sX
File empty; nothing to searchX
Reached end-of-file without finding the patternX
No previous search patternX
Pattern not foundX
Reached top-of-file without finding the patternX
Search wrappedX
Searching...X
No non-printable character foundX
Unknown command nameX

%s: command not available in ex modeX
Count may not be zeroX
%s: bad line specificationX
Internal syntax table error (%s: %s)X
Usage: %sX
%s: temporary buffer not releasedX
Flag offset to before line 1X
Flag offset past end-of-fileX
@ with range running when the file/screen changedX
Global/v command running when the file/screen changedX
Ex command failed: pending commands discardedX
Ex command failed: mapped keys discardedX
The second address is smaller than the firstX
No mark name suppliedX
\\ not followed by / or ?X
Reference to a line number less than 0X
The %s command is unknownX
Address value overflowX
Address value underflowX
Illegal address combinationX
Illegal address: only %lu lines in the fileX
Illegal address: the file is emptyX
The %s command doesn't permit an address of 0X
No abbreviations to displayX
Abbreviations must end with a "word" characterX
Abbreviations may not contain tabs or spacesX
Abbreviations may not mix word/non-word characters, except at the endX
"%s" is not an abbreviationX
Vi command failed: mapped keys discardedX
No more files to editX
No previous files to editX
No previous files to rewindX
No file list to displayX
No previous command to replace "!"X
No filename to substitute for %%X
No filename to substitute for #X
Error: execl: %sX
I/O error: %sX
File modified since last complete write; write or use ! to overrideX
Unable to find home directory locationX
New current directory: %sX
No cut buffers to displayX
The %s command can't be used as part of a global or v commandX
%s/%s: not sourced: not owned by you or rootX
%s/%s: not sourced: not owned by youX
%s/%s: not sourced: writeable by a user other than the ownerX
%s: not sourced: not owned by you or rootX
%s: not sourced: not owned by youX
%s: not sourced: writeable by a user other than the ownerX
No following lines to joinX
No input map entriesX
No command map entriesX
The %s character may not be remappedX
"%s" isn't currently mappedX
Mark names must be a single characterX
%s exists, not written; use ! to overrideX
New exrc file: %sX
Destination line is inside move rangeX
The open command requires that the open option be setX
The open command is not yet implementedX
Preservation of this file not possibleX
File preservedX
%s: expanded into too many file namesX
Only regular files and named pipes may be readX
%s: read lock was unavailableX
Reading...X
%s: %lu lines, %lu charactersX
No background screens to displayX
The script command is only available in vi modeX
No command to executeX
shiftwidth option set to 0X
Count overflowX
Count underflowX
Regular expression specified; r flag meaninglessX
The #, l and p flags may not be combined with the c flag in vi modeX
No match foundX
No previous tag enteredX
Less than %s entries on the tags stack; use :display t[ags]X
No file %s on the tags stack to return to; use :display t[ags]X
Press Enter to continue: X
%s: tag not foundX
%s: corrupted tag in %sX
%s: the tag's line number is past the end of the fileX
The tags stack is emptyX
%s: search pattern not foundX
%d more files to editX
Buffer %s is emptyX
Confirm change? [n]X
InterruptedX
No previous buffer to executeX
No previous regular expressionX
The %s command requires that a file have already been read inX
Usage: %sX
The visual command requires that the open option be setX

Empty fileX
No previous F, f, T or t searchX
%s not foundX
No previous file to editX
Cursor not in a numberX
Resulting number too largeX
Resulting number too smallX
No match character on this lineX
Matching character not foundX
No characters to replaceX
No other screen to switch toX
Characters after search string, line offset and/or z commandX
No previous search patternX
Search wrapped to original positionX
Abbreviation exceeded expansion limit: characters discardedX
Illegal character; quote to enterX
Already at the beginning of the insertX
No more characters to eraseX
Movement past the end-of-fileX
Movement past the end-of-lineX
No cursor movement madeX
Already at the beginning of the fileX
Movement past the beginning of the fileX
Already in the first columnX
Buffers should be specified before the commandX
Already at end-of-fileX
Already at end-of-lineX
%s isn't a vi commandX
Usage: %sX
No characters to deleteX
The Q command requires the ex terminal interfaceX
No command to repeatX
The file is emptyX
%s may not be used as a motion commandX
Already in command modeX
Cursor not in a wordX

Windows option value is too large, max is %uX
AppendX
ChangeX
CommandX
InsertX
ReplaceX
Movement past the end-of-screenX
Movement past the beginning-of-screenX
Screen must be larger than %d lines to splitX
There are no background screensX
There's no background screen editing a file named %sX
You may not background your only displayed screenX
The screen can only shrink to %d rowsX
The screen cannot shrinkX
The screen cannot growX

This screen may not be suspendedX
Interrupted: mapped keys discardedX
vi: temporary buffer not releasedX
This terminal has no %s keyX
Only one buffer may be specifiedX
Number larger than %luX
InterruptedX
Unable to create temporary fileX
Warning: %s is not a regular fileX
%s already locked, session is read-onlyX
%s: removeX
%s: closeX
%s: removeX
%s: removeX
Read-only file, not written; use ! to overrideX
Read-only file, not writtenX
%s exists, not written; use ! to overrideX
%s exists, not writtenX
Partial file, not written; use ! to overrideX
Partial file, not writtenX
%s: file modified more recently than this copy; use ! to overrideX
%s: file modified more recently than this copyX
%s: write lock was unavailableX
Writing...X
%s: WARNING: FILE TRUNCATEDX
Already at the first tag of this groupX
%s: new file: %lu lines, %lu charactersX
%s: %lu lines, %lu charactersX
%s expanded into too many file namesX
%s: not a regular fileX
%s: not owned by youX
%s: accessible by a user other than the ownerX
File modified since last complete write; write or use ! to overrideX
File modified since last complete write; write or use :edit! to overrideX
File modified since last complete write; write or use ! to overrideX
File is a temporary; exit will discard modificationsX
File readonly, modifications not auto-writtenX
Log restartedX
confirm? [ynq]X
Press any key to continue: X
Press any key to continue [: to enter more ex commands]: X
Press any key to continue [q to quit]: X
That form of %s requires the ex terminal interfaceX
Entering ex input mode.X
Command failed, no file read in yet.X
 cont?X
Unexpected character eventX
Unexpected end-of-file eventX
No matches for queryX
Unexpected interrupt eventX
Unexpected quit eventX
Unexpected repaint eventX
Already at the last tag of this groupX
The %s command requires the ex terminal interfaceX
That form of %s is not supported when the secure edit option is setX
Unexpected string eventX
Unexpected timeout eventX
Unexpected write eventX

Shell expansions not supported when the secure edit option is setX
The %s command is not supported when the secure edit option is setX
set: the %s option may not be turned offX
Display too small.X
addedX
changedX
deletedX
joinedX
movedX
shiftedX
yankedX
lineX
linesX
Vi was not loaded with a Tcl interpreterX
File modified since last write.X
Shell expansion failedX
No %s edit option specifiedX
Vi was not loaded with a Perl interpreterX
No ex command to executeX
Enter <CR> to execute a command, :q to exitX
Use "cscope help" for helpX
No cscope connections runningX
%s: unknown search type: use one of %sX
%d: no such cscope sessionX
set: the %s option may never be turned onX
set: the %s option may never be set to 0X
%s: appended: %lu lines, %lu charactersX
Unexpected resize eventX
%d files to editX