# # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License, Version 1.0 only # (the "License"). You may not use this file except in compliance # with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # Copyright (c) 1996, by Sun Microsystems, Inc. # All rights reserved. # #ident "%Z%%M% %I% %E% SMI" # # lsi: LEAR SIEGLER (ADM) # # If the adm31 gives you trouble with standout mode, check the DIP switch # in position 6, bank @c11, 25% from back end of pad. Should be OFF. # If there is no such switch, you have an old adm31 and must use oadm31 adm31|31|lsi adm31, is2=\Eu\E0, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, am, cub1=^H, el=\ET, cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=\E*, ed=\EY, cols#80, dch1=\EW, dl1=\ER, rmir=\Er, home=^^, smir=\Eq, kf0=^A0\r, kf1=^A1\r, kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, kcud1=^J, kcub1=^H, kcuf1=^L, kcuu1=^K, lines#24, mir, cuf1=^L, rmso=\EG0, smso=\EG1, cuu1=^K, smul=\EG1, rmul=\EG0, adm2|lsi adm2, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, am, cub1=^H, ed=\EY, el=\ET, clear=\E;, cup=\E=%p1%' '%+%c%p2%' '%+%c, cols#80, dch1=\EW, dl1=\ER, home=^^, ich1=\EQ, kcud1=^J, khome=^^, kcub1=^H, kcuf1=^L, kcuu1=^K, lines#24, cuf1=^L, cuu1=^K, adm3|lsi adm3, cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, clear=^Z, lines#24, cols#80, adm42|42|lsi adm42, cvvis=\EC\E3 \E3(, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE$<270>, am, cub1=^H, ed=\EY, el=\ET, clear=\E;, cup=\E=%p1%' '%+%c%p2%' '%+%c, cols#80, dch1=\EW, dl1=\ER, rmir=\Er, smir=\Eq, ip=$<6*>, lines#24, cbt=\EI, cuf1=^L, rmso=\EG0, smso=\EG4, ht=\t, cuu1=^k, pad=\177, adm5|lsi adm5, cr=^M, cud1=^J, ind=^J, bel=^G, ed=\EY, el=\ET, cud1=^J, kbs=^H, khome=^^, rmso=\EG, xmc#1, smso=\EG, use=adm3aplus, adm3a|3a|lsi adm3a, cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=^Z$<1>, cols#80, home=^^, lines#24, cuf1=^L, cuu1=^K, # # MPE/IX has trouble with files that have '+' in the name. # adm3a+|3a+|adm3aplus|lsi adm3a+, # adm3aplus|lsi adm3a+, kcub1=^H, kcud1=^J, kcuu1=^K, kcuf1=^L, use=adm3a, oadm31|o31|old adm31, smso=\EG4, smul@, rmul@, use=adm31,