OpenSolaris_b135/uts/intel/sys/acpi/actbl2.h
/******************************************************************************
*
* Name: actbl2.h - ACPI Specification Revision 2.0 Tables
*
*****************************************************************************/
/******************************************************************************
*
* 1. Copyright Notice
*
* Some or all of this work - Copyright (c) 1999 - 2009, Intel Corp.
* All rights reserved.
*
* 2. License
*
* 2.1. This is your license from Intel Corp. under its intellectual property
* rights. You may have additional license terms from the party that provided
* you this software, covering your right to use that party's intellectual
* property rights.
*
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a
* copy of the source code appearing in this file ("Covered Code") an
* irrevocable, perpetual, worldwide license under Intel's copyrights in the
* base code distributed originally by Intel ("Original Intel Code") to copy,
* make derivatives, distribute, use and display any portion of the Covered
* Code in any form, with the right to sublicense such rights; and
*
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent
* license (with the right to sublicense), under only those claims of Intel
* patents that are infringed by the Original Intel Code, to make, use, sell,
* offer to sell, and import the Covered Code and derivative works thereof
* solely to the minimum extent necessary to exercise the above copyright
* license, and in no event shall the patent license extend to any additions
* to or modifications of the Original Intel Code. No other license or right
* is granted directly or by implication, estoppel or otherwise;
*
* The above copyright and patent license is granted only if the following
* conditions are met:
*
* 3. Conditions
*
* 3.1. Redistribution of Source with Rights to Further Distribute Source.
* Redistribution of source code of any substantial portion of the Covered
* Code or modification with rights to further distribute source must include
* the above Copyright Notice, the above License, this list of Conditions,
* and the following Disclaimer and Export Compliance provision. In addition,
* Licensee must cause all Covered Code to which Licensee contributes to
* contain a file documenting the changes Licensee made to create that Covered
* Code and the date of any change. Licensee must include in that file the
* documentation of any changes made by any predecessor Licensee. Licensee
* must include a prominent statement that the modification is derived,
* directly or indirectly, from Original Intel Code.
*
* 3.2. Redistribution of Source with no Rights to Further Distribute Source.
* Redistribution of source code of any substantial portion of the Covered
* Code or modification without rights to further distribute source must
* include the following Disclaimer and Export Compliance provision in the
* documentation and/or other materials provided with distribution. In
* addition, Licensee may not authorize further sublicense of source of any
* portion of the Covered Code, and must include terms to the effect that the
* license from Licensee to its licensee is limited to the intellectual
* property embodied in the software Licensee provides to its licensee, and
* not to intellectual property embodied in modifications its licensee may
* make.
*
* 3.3. Redistribution of Executable. Redistribution in executable form of any
* substantial portion of the Covered Code or modification must reproduce the
* above Copyright Notice, and the following Disclaimer and Export Compliance
* provision in the documentation and/or other materials provided with the
* distribution.
*
* 3.4. Intel retains all right, title, and interest in and to the Original
* Intel Code.
*
* 3.5. Neither the name Intel nor any other trademark owned or controlled by
* Intel shall be used in advertising or otherwise to promote the sale, use or
* other dealings in products derived from or relating to the Covered Code
* without prior written authorization from Intel.
*
* 4. Disclaimer and Export Compliance
*
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE,
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A
* PARTICULAR PURPOSE.
*
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT,
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY
* LIMITED REMEDY.
*
* 4.3. Licensee shall not export, either directly or indirectly, any of this
* software or system incorporating such software without first obtaining any
* required license or other approval from the U. S. Department of Commerce or
* any other agency or department of the United States Government. In the
* event Licensee exports any such software from the United States or
* re-exports any such software from a foreign destination, Licensee shall
* ensure that the distribution and export/re-export of the software is in
* compliance with all laws, regulations, orders, or other restrictions of the
* U.S. Export Administration Regulations. Licensee agrees that neither it nor
* any of its subsidiaries will export/re-export any technical data, process,
* software, or service, directly or indirectly, to any country for which the
* United States government or any agency thereof requires an export license,
* other governmental approval, or letter of assurance, without first obtaining
* such license, approval or letter.
*
*****************************************************************************/
#ifndef __ACTBL2_H__
#define __ACTBL2_H__
/*******************************************************************************
*
* Additional ACPI Tables (2)
*
* These tables are not consumed directly by the ACPICA subsystem, but are
* included here to support device drivers and the AML disassembler.
*
* The tables in this file are defined by third-party specifications, and are
* not defined directly by the ACPI specification itself.
*
******************************************************************************/
/*
* Values for description table header signatures for tables defined in this
* file. Useful because they make it more difficult to inadvertently type in
* the wrong signature.
*/
#define ACPI_SIG_ASF "ASF!" /* Alert Standard Format table */
#define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */
#define ACPI_SIG_DBGP "DBGP" /* Debug Port table */
#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */
#define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */
#define ACPI_SIG_IBFT "IBFT" /* iSCSI Boot Firmware Table */
#define ACPI_SIG_IVRS "IVRS" /* I/O Virtualization Reporting Structure */
#define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */
#define ACPI_SIG_SLIC "SLIC" /* Software Licensing Description Table */
#define ACPI_SIG_SPCR "SPCR" /* Serial Port Console Redirection table */
#define ACPI_SIG_SPMI "SPMI" /* Server Platform Management Interface table */
#define ACPI_SIG_TCPA "TCPA" /* Trusted Computing Platform Alliance table */
#define ACPI_SIG_UEFI "UEFI" /* Uefi Boot Optimization Table */
#define ACPI_SIG_WAET "WAET" /* Windows ACPI Emulated devices Table */
#define ACPI_SIG_WDAT "WDAT" /* Watchdog Action Table */
#define ACPI_SIG_WDRT "WDRT" /* Watchdog Resource Table */
/*
* All tables must be byte-packed to match the ACPI specification, since
* the tables are provided by the system BIOS.
*/
#pragma pack(1)
/*
* Note about bitfields: The UINT8 type is used for bitfields in ACPI tables.
* This is the only type that is even remotely portable. Anything else is not
* portable, so do not use any other bitfield types.
*/
/*******************************************************************************
*
* ASF - Alert Standard Format table (Signature "ASF!")
* Revision 0x10
*
* Conforms to the Alert Standard Format Specification V2.0, 23 April 2003
*
******************************************************************************/
typedef struct acpi_table_asf
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
} ACPI_TABLE_ASF;
/* ASF subtable header */
typedef struct acpi_asf_header
{
UINT8 Type;
UINT8 Reserved;
UINT16 Length;
} ACPI_ASF_HEADER;
/* Values for Type field above */
enum AcpiAsfType
{
ACPI_ASF_TYPE_INFO = 0,
ACPI_ASF_TYPE_ALERT = 1,
ACPI_ASF_TYPE_CONTROL = 2,
ACPI_ASF_TYPE_BOOT = 3,
ACPI_ASF_TYPE_ADDRESS = 4,
ACPI_ASF_TYPE_RESERVED = 5
};
/*
* ASF subtables
*/
/* 0: ASF Information */
typedef struct acpi_asf_info
{
ACPI_ASF_HEADER Header;
UINT8 MinResetValue;
UINT8 MinPollInterval;
UINT16 SystemId;
UINT32 MfgId;
UINT8 Flags;
UINT8 Reserved2[3];
} ACPI_ASF_INFO;
/* Masks for Flags field above */
#define ACPI_ASF_SMBUS_PROTOCOLS (1)
/* 1: ASF Alerts */
typedef struct acpi_asf_alert
{
ACPI_ASF_HEADER Header;
UINT8 AssertMask;
UINT8 DeassertMask;
UINT8 Alerts;
UINT8 DataLength;
} ACPI_ASF_ALERT;
typedef struct acpi_asf_alert_data
{
UINT8 Address;
UINT8 Command;
UINT8 Mask;
UINT8 Value;
UINT8 SensorType;
UINT8 Type;
UINT8 Offset;
UINT8 SourceType;
UINT8 Severity;
UINT8 SensorNumber;
UINT8 Entity;
UINT8 Instance;
} ACPI_ASF_ALERT_DATA;
/* 2: ASF Remote Control */
typedef struct acpi_asf_remote
{
ACPI_ASF_HEADER Header;
UINT8 Controls;
UINT8 DataLength;
UINT16 Reserved2;
} ACPI_ASF_REMOTE;
typedef struct acpi_asf_control_data
{
UINT8 Function;
UINT8 Address;
UINT8 Command;
UINT8 Value;
} ACPI_ASF_CONTROL_DATA;
/* 3: ASF RMCP Boot Options */
typedef struct acpi_asf_rmcp
{
ACPI_ASF_HEADER Header;
UINT8 Capabilities[7];
UINT8 CompletionCode;
UINT32 EnterpriseId;
UINT8 Command;
UINT16 Parameter;
UINT16 BootOptions;
UINT16 OemParameters;
} ACPI_ASF_RMCP;
/* 4: ASF Address */
typedef struct acpi_asf_address
{
ACPI_ASF_HEADER Header;
UINT8 EpromAddress;
UINT8 Devices;
} ACPI_ASF_ADDRESS;
/*******************************************************************************
*
* BOOT - Simple Boot Flag Table
* Version 1
*
* Conforms to the "Simple Boot Flag Specification", Version 2.1
*
******************************************************************************/
typedef struct acpi_table_boot
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT8 CmosIndex; /* Index in CMOS RAM for the boot register */
UINT8 Reserved[3];
} ACPI_TABLE_BOOT;
/*******************************************************************************
*
* DBGP - Debug Port table
* Version 1
*
* Conforms to the "Debug Port Specification", Version 1.00, 2/9/2000
*
******************************************************************************/
typedef struct acpi_table_dbgp
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT8 Type; /* 0=full 16550, 1=subset of 16550 */
UINT8 Reserved[3];
ACPI_GENERIC_ADDRESS DebugPort;
} ACPI_TABLE_DBGP;
/*******************************************************************************
*
* DMAR - DMA Remapping table
* Version 1
*
* Conforms to "Intel Virtualization Technology for Directed I/O",
* Version 1.2, Sept. 2008
*
******************************************************************************/
typedef struct acpi_table_dmar
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT8 Width; /* Host Address Width */
UINT8 Flags;
UINT8 Reserved[10];
} ACPI_TABLE_DMAR;
/* Masks for Flags field above */
#define ACPI_DMAR_INTR_REMAP (1)
/* DMAR subtable header */
typedef struct acpi_dmar_header
{
UINT16 Type;
UINT16 Length;
} ACPI_DMAR_HEADER;
/* Values for subtable type in ACPI_DMAR_HEADER */
enum AcpiDmarType
{
ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,
ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,
ACPI_DMAR_TYPE_ATSR = 2,
ACPI_DMAR_HARDWARE_AFFINITY = 3,
ACPI_DMAR_TYPE_RESERVED = 4 /* 4 and greater are reserved */
};
/* DMAR Device Scope structure */
typedef struct acpi_dmar_device_scope
{
UINT8 EntryType;
UINT8 Length;
UINT16 Reserved;
UINT8 EnumerationId;
UINT8 Bus;
} ACPI_DMAR_DEVICE_SCOPE;
/* Values for EntryType in ACPI_DMAR_DEVICE_SCOPE */
enum AcpiDmarScopeType
{
ACPI_DMAR_SCOPE_TYPE_NOT_USED = 0,
ACPI_DMAR_SCOPE_TYPE_ENDPOINT = 1,
ACPI_DMAR_SCOPE_TYPE_BRIDGE = 2,
ACPI_DMAR_SCOPE_TYPE_IOAPIC = 3,
ACPI_DMAR_SCOPE_TYPE_HPET = 4,
ACPI_DMAR_SCOPE_TYPE_RESERVED = 5 /* 5 and greater are reserved */
};
typedef struct acpi_dmar_pci_path
{
UINT8 Device;
UINT8 Function;
} ACPI_DMAR_PCI_PATH;
/*
* DMAR Sub-tables, correspond to Type in ACPI_DMAR_HEADER
*/
/* 0: Hardware Unit Definition */
typedef struct acpi_dmar_hardware_unit
{
ACPI_DMAR_HEADER Header;
UINT8 Flags;
UINT8 Reserved;
UINT16 Segment;
UINT64 Address; /* Register Base Address */
} ACPI_DMAR_HARDWARE_UNIT;
/* Masks for Flags field above */
#define ACPI_DMAR_INCLUDE_ALL (1)
/* 1: Reserved Memory Defininition */
typedef struct acpi_dmar_reserved_memory
{
ACPI_DMAR_HEADER Header;
UINT16 Reserved;
UINT16 Segment;
UINT64 BaseAddress; /* 4K aligned base address */
UINT64 EndAddress; /* 4K aligned limit address */
} ACPI_DMAR_RESERVED_MEMORY;
/* Masks for Flags field above */
#define ACPI_DMAR_ALLOW_ALL (1)
/* 2: Root Port ATS Capability Reporting Structure */
typedef struct acpi_dmar_atsr
{
ACPI_DMAR_HEADER Header;
UINT8 Flags;
UINT8 Reserved;
UINT16 Segment;
} ACPI_DMAR_ATSR;
/* Masks for Flags field above */
#define ACPI_DMAR_ALL_PORTS (1)
/* 3: Remapping Hardware Static Affinity Structure */
typedef struct acpi_dmar_rhsa
{
ACPI_DMAR_HEADER Header;
UINT32 Reserved;
UINT64 BaseAddress;
UINT32 ProximityDomain;
} ACPI_DMAR_RHSA;
/*******************************************************************************
*
* HPET - High Precision Event Timer table
* Version 1
*
* Conforms to "IA-PC HPET (High Precision Event Timers) Specification",
* Version 1.0a, October 2004
*
******************************************************************************/
typedef struct acpi_table_hpet
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT32 Id; /* Hardware ID of event timer block */
ACPI_GENERIC_ADDRESS Address; /* Address of event timer block */
UINT8 Sequence; /* HPET sequence number */
UINT16 MinimumTick; /* Main counter min tick, periodic mode */
UINT8 Flags;
} ACPI_TABLE_HPET;
/* Masks for Flags field above */
#define ACPI_HPET_PAGE_PROTECT_MASK (3)
/* Values for Page Protect flags */
enum AcpiHpetPageProtect
{
ACPI_HPET_NO_PAGE_PROTECT = 0,
ACPI_HPET_PAGE_PROTECT4 = 1,
ACPI_HPET_PAGE_PROTECT64 = 2
};
/*******************************************************************************
*
* IBFT - Boot Firmware Table
* Version 1
*
* Conforms to "iSCSI Boot Firmware Table (iBFT) as Defined in ACPI 3.0b
* Specification", Version 1.01, March 1, 2007
*
* Note: It appears that this table is not intended to appear in the RSDT/XSDT.
* Therefore, it is not currently supported by the disassembler.
*
******************************************************************************/
typedef struct acpi_table_ibft
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT8 Reserved[12];
} ACPI_TABLE_IBFT;
/* IBFT common subtable header */
typedef struct acpi_ibft_header
{
UINT8 Type;
UINT8 Version;
UINT16 Length;
UINT8 Index;
UINT8 Flags;
} ACPI_IBFT_HEADER;
/* Values for Type field above */
enum AcpiIbftType
{
ACPI_IBFT_TYPE_NOT_USED = 0,
ACPI_IBFT_TYPE_CONTROL = 1,
ACPI_IBFT_TYPE_INITIATOR = 2,
ACPI_IBFT_TYPE_NIC = 3,
ACPI_IBFT_TYPE_TARGET = 4,
ACPI_IBFT_TYPE_EXTENSIONS = 5,
ACPI_IBFT_TYPE_RESERVED = 6 /* 6 and greater are reserved */
};
/* IBFT subtables */
typedef struct acpi_ibft_control
{
ACPI_IBFT_HEADER Header;
UINT16 Extensions;
UINT16 InitiatorOffset;
UINT16 Nic0Offset;
UINT16 Target0Offset;
UINT16 Nic1Offset;
UINT16 Target1Offset;
} ACPI_IBFT_CONTROL;
typedef struct acpi_ibft_initiator
{
ACPI_IBFT_HEADER Header;
UINT8 SnsServer[16];
UINT8 SlpServer[16];
UINT8 PrimaryServer[16];
UINT8 SecondaryServer[16];
UINT16 NameLength;
UINT16 NameOffset;
} ACPI_IBFT_INITIATOR;
typedef struct acpi_ibft_nic
{
ACPI_IBFT_HEADER Header;
UINT8 IpAddress[16];
UINT8 SubnetMaskPrefix;
UINT8 Origin;
UINT8 Gateway[16];
UINT8 PrimaryDns[16];
UINT8 SecondaryDns[16];
UINT8 Dhcp[16];
UINT16 Vlan;
UINT8 MacAddress[6];
UINT16 PciAddress;
UINT16 NameLength;
UINT16 NameOffset;
} ACPI_IBFT_NIC;
typedef struct acpi_ibft_target
{
ACPI_IBFT_HEADER Header;
UINT8 TargetIpAddress[16];
UINT16 TargetIpSocket;
UINT8 TargetBootLun[8];
UINT8 ChapType;
UINT8 NicAssociation;
UINT16 TargetNameLength;
UINT16 TargetNameOffset;
UINT16 ChapNameLength;
UINT16 ChapNameOffset;
UINT16 ChapSecretLength;
UINT16 ChapSecretOffset;
UINT16 ReverseChapNameLength;
UINT16 ReverseChapNameOffset;
UINT16 ReverseChapSecretLength;
UINT16 ReverseChapSecretOffset;
} ACPI_IBFT_TARGET;
/*******************************************************************************
*
* IVRS - I/O Virtualization Reporting Structure
* Version 1
*
* Conforms to "AMD I/O Virtualization Technology (IOMMU) Specification",
* Revision 1.26, February 2009.
*
******************************************************************************/
typedef struct acpi_table_ivrs
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT32 Info; /* Common virtualization info */
UINT64 Reserved;
} ACPI_TABLE_IVRS;
/* Values for Info field above */
#define ACPI_IVRS_PHYSICAL_SIZE 0x00007F00 /* 7 bits, physical address size */
#define ACPI_IVRS_VIRTUAL_SIZE 0x003F8000 /* 7 bits, virtual address size */
#define ACPI_IVRS_ATS_RESERVED 0x00400000 /* ATS address translation range reserved */
/* IVRS subtable header */
typedef struct acpi_ivrs_header
{
UINT8 Type; /* Subtable type */
UINT8 Flags;
UINT16 Length; /* Subtable length */
UINT16 DeviceId; /* ID of IOMMU */
} ACPI_IVRS_HEADER;
/* Values for subtable Type above */
enum AcpiIvrsType
{
ACPI_IVRS_TYPE_HARDWARE = 0x10,
ACPI_IVRS_TYPE_MEMORY1 = 0x20,
ACPI_IVRS_TYPE_MEMORY2 = 0x21,
ACPI_IVRS_TYPE_MEMORY3 = 0x22
};
/* Masks for Flags field above for IVHD subtable */
#define ACPI_IVHD_TT_ENABLE (1)
#define ACPI_IVHD_PASS_PW (1<<1)
#define ACPI_IVHD_RES_PASS_PW (1<<2)
#define ACPI_IVHD_ISOC (1<<3)
#define ACPI_IVHD_IOTLB (1<<4)
/* Masks for Flags field above for IVMD subtable */
#define ACPI_IVMD_UNITY (1)
#define ACPI_IVMD_READ (1<<1)
#define ACPI_IVMD_WRITE (1<<2)
#define ACPI_IVMD_EXCLUSION_RANGE (1<<3)
/*
* IVRS subtables, correspond to Type in ACPI_IVRS_HEADER
*/
/* 0x10: I/O Virtualization Hardware Definition Block (IVHD) */
typedef struct acpi_ivrs_hardware
{
ACPI_IVRS_HEADER Header;
UINT16 CapabilityOffset; /* Offset for IOMMU control fields */
UINT64 BaseAddress; /* IOMMU control registers */
UINT16 PciSegmentGroup;
UINT16 Info; /* MSI number and unit ID */
UINT32 Reserved;
} ACPI_IVRS_HARDWARE;
/* Masks for Info field above */
#define ACPI_IVHD_MSI_NUMBER_MASK 0x001F /* 5 bits, MSI message number */
#define ACPI_IVHD_UNIT_ID_MASK 0x1F00 /* 5 bits, UnitID */
/*
* Device Entries for IVHD subtable, appear after ACPI_IVRS_HARDWARE structure.
* Upper two bits of the Type field are the (encoded) length of the structure.
* Currently, only 4 and 8 byte entries are defined. 16 and 32 byte entries
* are reserved for future use but not defined.
*/
typedef struct acpi_ivrs_de_header
{
UINT8 Type;
UINT16 Id;
UINT8 DataSetting;
} ACPI_IVRS_DE_HEADER;
/* Length of device entry is in the top two bits of Type field above */
#define ACPI_IVHD_ENTRY_LENGTH 0xC0
/* Values for device entry Type field above */
enum AcpiIvrsDeviceEntryType
{
/* 4-byte device entries, all use ACPI_IVRS_DEVICE4 */
ACPI_IVRS_TYPE_PAD4 = 0,
ACPI_IVRS_TYPE_ALL = 1,
ACPI_IVRS_TYPE_SELECT = 2,
ACPI_IVRS_TYPE_START = 3,
ACPI_IVRS_TYPE_END = 4,
/* 8-byte device entries */
ACPI_IVRS_TYPE_PAD8 = 64,
ACPI_IVRS_TYPE_NOT_USED = 65,
ACPI_IVRS_TYPE_ALIAS_SELECT = 66, /* Uses ACPI_IVRS_DEVICE8A */
ACPI_IVRS_TYPE_ALIAS_START = 67, /* Uses ACPI_IVRS_DEVICE8A */
ACPI_IVRS_TYPE_EXT_SELECT = 70, /* Uses ACPI_IVRS_DEVICE8B */
ACPI_IVRS_TYPE_EXT_START = 71, /* Uses ACPI_IVRS_DEVICE8B */
ACPI_IVRS_TYPE_SPECIAL = 72 /* Uses ACPI_IVRS_DEVICE8C */
};
/* Values for Data field above */
#define ACPI_IVHD_INIT_PASS (1)
#define ACPI_IVHD_EINT_PASS (1<<1)
#define ACPI_IVHD_NMI_PASS (1<<2)
#define ACPI_IVHD_SYSTEM_MGMT (3<<4)
#define ACPI_IVHD_LINT0_PASS (1<<6)
#define ACPI_IVHD_LINT1_PASS (1<<7)
/* Types 0-4: 4-byte device entry */
typedef struct acpi_ivrs_device4
{
ACPI_IVRS_DE_HEADER Header;
} ACPI_IVRS_DEVICE4;
/* Types 66-67: 8-byte device entry */
typedef struct acpi_ivrs_device8a
{
ACPI_IVRS_DE_HEADER Header;
UINT8 Reserved1;
UINT16 UsedId;
UINT8 Reserved2;
} ACPI_IVRS_DEVICE8A;
/* Types 70-71: 8-byte device entry */
typedef struct acpi_ivrs_device8b
{
ACPI_IVRS_DE_HEADER Header;
UINT32 ExtendedData;
} ACPI_IVRS_DEVICE8B;
/* Values for ExtendedData above */
#define ACPI_IVHD_ATS_DISABLED (1<<31)
/* Type 72: 8-byte device entry */
typedef struct acpi_ivrs_device8c
{
ACPI_IVRS_DE_HEADER Header;
UINT8 Handle;
UINT16 UsedId;
UINT8 Variety;
} ACPI_IVRS_DEVICE8C;
/* Values for Variety field above */
#define ACPI_IVHD_IOAPIC 1
#define ACPI_IVHD_HPET 2
/* 0x20, 0x21, 0x22: I/O Virtualization Memory Definition Block (IVMD) */
typedef struct acpi_ivrs_memory
{
ACPI_IVRS_HEADER Header;
UINT16 AuxData;
UINT64 Reserved;
UINT64 StartAddress;
UINT64 MemoryLength;
} ACPI_IVRS_MEMORY;
/*******************************************************************************
*
* MCFG - PCI Memory Mapped Configuration table and sub-table
* Version 1
*
* Conforms to "PCI Firmware Specification", Revision 3.0, June 20, 2005
*
******************************************************************************/
typedef struct acpi_table_mcfg
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT8 Reserved[8];
} ACPI_TABLE_MCFG;
/* Subtable */
typedef struct acpi_mcfg_allocation
{
UINT64 Address; /* Base address, processor-relative */
UINT16 PciSegment; /* PCI segment group number */
UINT8 StartBusNumber; /* Starting PCI Bus number */
UINT8 EndBusNumber; /* Final PCI Bus number */
UINT32 Reserved;
} ACPI_MCFG_ALLOCATION;
/*******************************************************************************
*
* SPCR - Serial Port Console Redirection table
* Version 1
*
* Conforms to "Serial Port Console Redirection Table",
* Version 1.00, January 11, 2002
*
******************************************************************************/
typedef struct acpi_table_spcr
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT8 InterfaceType; /* 0=full 16550, 1=subset of 16550 */
UINT8 Reserved[3];
ACPI_GENERIC_ADDRESS SerialPort;
UINT8 InterruptType;
UINT8 PcInterrupt;
UINT32 Interrupt;
UINT8 BaudRate;
UINT8 Parity;
UINT8 StopBits;
UINT8 FlowControl;
UINT8 TerminalType;
UINT8 Reserved1;
UINT16 PciDeviceId;
UINT16 PciVendorId;
UINT8 PciBus;
UINT8 PciDevice;
UINT8 PciFunction;
UINT32 PciFlags;
UINT8 PciSegment;
UINT32 Reserved2;
} ACPI_TABLE_SPCR;
/* Masks for PciFlags field above */
#define ACPI_SPCR_DO_NOT_DISABLE (1)
/*******************************************************************************
*
* SPMI - Server Platform Management Interface table
* Version 5
*
* Conforms to "Intelligent Platform Management Interface Specification
* Second Generation v2.0", Document Revision 1.0, February 12, 2004 with
* June 12, 2009 markup.
*
******************************************************************************/
typedef struct acpi_table_spmi
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT8 InterfaceType;
UINT8 Reserved; /* Must be 1 */
UINT16 SpecRevision; /* Version of IPMI */
UINT8 InterruptType;
UINT8 GpeNumber; /* GPE assigned */
UINT8 Reserved1;
UINT8 PciDeviceFlag;
UINT32 Interrupt;
ACPI_GENERIC_ADDRESS IpmiRegister;
UINT8 PciSegment;
UINT8 PciBus;
UINT8 PciDevice;
UINT8 PciFunction;
UINT8 Reserved2;
} ACPI_TABLE_SPMI;
/* Values for InterfaceType above */
enum AcpiSpmiInterfaceTypes
{
ACPI_SPMI_NOT_USED = 0,
ACPI_SPMI_KEYBOARD = 1,
ACPI_SPMI_SMI = 2,
ACPI_SPMI_BLOCK_TRANSFER = 3,
ACPI_SPMI_SMBUS = 4,
ACPI_SPMI_RESERVED = 5 /* 5 and above are reserved */
};
/*******************************************************************************
*
* TCPA - Trusted Computing Platform Alliance table
* Version 1
*
* Conforms to "TCG PC Specific Implementation Specification",
* Version 1.1, August 18, 2003
*
******************************************************************************/
typedef struct acpi_table_tcpa
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT16 Reserved;
UINT32 MaxLogLength; /* Maximum length for the event log area */
UINT64 LogAddress; /* Address of the event log area */
} ACPI_TABLE_TCPA;
/*******************************************************************************
*
* UEFI - UEFI Boot optimization Table
* Version 1
*
* Conforms to "Unified Extensible Firmware Interface Specification",
* Version 2.3, May 8, 2009
*
******************************************************************************/
typedef struct acpi_table_uefi
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT8 Identifier[16]; /* UUID identifier */
UINT16 DataOffset; /* Offset of remaining data in table */
} ACPI_TABLE_UEFI;
/*******************************************************************************
*
* WAET - Windows ACPI Emulated devices Table
* Version 1
*
* Conforms to "Windows ACPI Emulated Devices Table", version 1.0, April 6, 2009
*
******************************************************************************/
typedef struct acpi_table_waet
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT32 Flags;
} ACPI_TABLE_WAET;
/* Masks for Flags field above */
#define ACPI_WAET_RTC_NO_ACK (1) /* RTC requires no int acknowledge */
#define ACPI_WAET_TIMER_ONE_READ (1<<1) /* PM timer requires only one read */
/*******************************************************************************
*
* WDAT - Watchdog Action Table
* Version 1
*
* Conforms to "Hardware Watchdog Timers Design Specification",
* Copyright 2006 Microsoft Corporation.
*
******************************************************************************/
typedef struct acpi_table_wdat
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
UINT32 HeaderLength; /* Watchdog Header Length */
UINT16 PciSegment; /* PCI Segment number */
UINT8 PciBus; /* PCI Bus number */
UINT8 PciDevice; /* PCI Device number */
UINT8 PciFunction; /* PCI Function number */
UINT8 Reserved[3];
UINT32 TimerPeriod; /* Period of one timer count (msec) */
UINT32 MaxCount; /* Maximum counter value supported */
UINT32 MinCount; /* Minimum counter value */
UINT8 Flags;
UINT8 Reserved2[3];
UINT32 Entries; /* Number of watchdog entries that follow */
} ACPI_TABLE_WDAT;
/* Masks for Flags field above */
#define ACPI_WDAT_ENABLED (1)
#define ACPI_WDAT_STOPPED 0x80
/* WDAT Instruction Entries (actions) */
typedef struct acpi_wdat_entry
{
UINT8 Action;
UINT8 Instruction;
UINT16 Reserved;
ACPI_GENERIC_ADDRESS RegisterRegion;
UINT32 Value; /* Value used with Read/Write register */
UINT32 Mask; /* Bitmask required for this register instruction */
} ACPI_WDAT_ENTRY;
/* Values for Action field above */
enum AcpiWdatActions
{
ACPI_WDAT_RESET = 1,
ACPI_WDAT_GET_CURRENT_COUNTDOWN = 4,
ACPI_WDAT_GET_COUNTDOWN = 5,
ACPI_WDAT_SET_COUNTDOWN = 6,
ACPI_WDAT_GET_RUNNING_STATE = 8,
ACPI_WDAT_SET_RUNNING_STATE = 9,
ACPI_WDAT_GET_STOPPED_STATE = 10,
ACPI_WDAT_SET_STOPPED_STATE = 11,
ACPI_WDAT_GET_REBOOT = 16,
ACPI_WDAT_SET_REBOOT = 17,
ACPI_WDAT_GET_SHUTDOWN = 18,
ACPI_WDAT_SET_SHUTDOWN = 19,
ACPI_WDAT_GET_STATUS = 32,
ACPI_WDAT_SET_STATUS = 33,
ACPI_WDAT_ACTION_RESERVED = 34 /* 34 and greater are reserved */
};
/* Values for Instruction field above */
enum AcpiWdatInstructions
{
ACPI_WDAT_READ_VALUE = 0,
ACPI_WDAT_READ_COUNTDOWN = 1,
ACPI_WDAT_WRITE_VALUE = 2,
ACPI_WDAT_WRITE_COUNTDOWN = 3,
ACPI_WDAT_INSTRUCTION_RESERVED = 4, /* 4 and greater are reserved */
ACPI_WDAT_PRESERVE_REGISTER = 0x80 /* Except for this value */
};
/*******************************************************************************
*
* WDRT - Watchdog Resource Table
* Version 1
*
* Conforms to "Watchdog Timer Hardware Requirements for Windows Server 2003",
* Version 1.01, August 28, 2006
*
******************************************************************************/
typedef struct acpi_table_wdrt
{
ACPI_TABLE_HEADER Header; /* Common ACPI table header */
ACPI_GENERIC_ADDRESS ControlRegister;
ACPI_GENERIC_ADDRESS CountRegister;
UINT16 PciDeviceId;
UINT16 PciVendorId;
UINT8 PciBus; /* PCI Bus number */
UINT8 PciDevice; /* PCI Device number */
UINT8 PciFunction; /* PCI Function number */
UINT8 PciSegment; /* PCI Segment number */
UINT16 MaxCount; /* Maximum counter value supported */
UINT8 Units;
} ACPI_TABLE_WDRT;
/* Reset to default packing */
#pragma pack()
#endif /* __ACTBL2_H__ */