OpenSolaris_b135/cmd/auditd/auditd.xml

<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
<!--
 Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
 Use is subject to license terms.

 CDDL HEADER START

 The contents of this file are subject to the terms of the
 Common Development and Distribution License (the "License").
 You may not use this file except in compliance with the License.

 You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 or http://www.opensolaris.org/os/licensing.
 See the License for the specific language governing permissions
 and limitations under the License.

 When distributing Covered Code, include this CDDL HEADER in each
 file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 If applicable, add the following below this CDDL HEADER, with the
 fields enclosed by brackets "[]" replaced with your own identifying
 information: Portions Copyright [yyyy] [name of copyright owner]

 CDDL HEADER END

    NOTE:  This service manifest is not editable; its contents will
    be overwritten by package or patch operations, including
    operating system upgrade.  Make customizations in a different
    file.
-->

<service_bundle type='manifest' name='SUNWcsr:auditd'>

<service
	name='system/auditd'
	type='service'
	version='1'>

	<single_instance />

	<dependency
		name='usr'
		type='service'
		grouping='require_all'
		restart_on='none'>
		<service_fmri value='svc:/system/filesystem/local' />
	</dependency>

	<dependency
		name='ns'
		type='service'
		grouping='require_all'
		restart_on='none'>
		<service_fmri value='svc:/milestone/name-services' />
	</dependency>

	<dependency
		name='syslog'
		type='service'
		grouping='optional_all'
		restart_on='none'>
		<service_fmri value='svc:/system/system-log' />
	</dependency>


	<dependent
		name='multi-user'
		grouping='optional_all'
		restart_on='none'>
		<service_fmri value='svc:/milestone/multi-user'/>
	</dependent>

	<dependent
		name='console-login'
		grouping='optional_all'
		restart_on='none'>
		<service_fmri value='svc:/system/console-login'/>
	</dependent>


	<exec_method
		type='method'
		name='start'
		exec='/lib/svc/method/svc-auditd'
		timeout_seconds='60'>
		<method_context>
			<method_credential user='root' group='root' />
		</method_context>
	</exec_method>

	<exec_method
		type='method'
		name='refresh'
		exec='/lib/svc/method/svc-auditd'
		timeout_seconds='30'>
		<method_context>
			<method_credential user='root' group='root' />
		</method_context>
	</exec_method>

	<!--
	  auditd waits for c2audit to quiet down after catching a -TERM
	  before exiting; auditd's timeout is 20 seconds
	-->

	<exec_method
		type='method'
		name='stop'
		exec=':kill -TERM'
		timeout_seconds='30'>
		<method_context>
			<method_credential user='root' group='root' />
		</method_context>
	</exec_method>

	<!-- SIGs HUP, TERM, and USR1 are all expected by auditd -->
	<property_group name='startd' type='framework'>
		<propval name='ignore_error' type='astring'
			value='core,signal' />
	</property_group>

	<property_group name='general' type='framework'>
		<!-- to start/stop auditd -->
		<propval name='action_authorization' type='astring'
			value='solaris.audit.config' />
		<propval name='value_authorization' type='astring'
			value='solaris.audit.config' />
	</property_group>


	<instance name='default' enabled='false'>

	<!--
	  Audit Queue Control Properties - see auditconfig(1M)
	    
	    Note, that the default value for all the queue control
	    configuration parameters is 0, which makes auditd(1M) to
	    use current active system parameters.
	-->
	<property_group name='queuectrl' type='application' >
		<propval name='qbufsz' type='count'
			value='0' />
		<propval name='qdelay' type='count'
			value='0' />
		<propval name='qhiwater' type='count'
			value='0' />
		<propval name='qlowater' type='count'
			value='0' />
		<propval name='read_authorization' type='astring'
			value='solaris.audit.config' />
	</property_group>

	<!--
	  Audit Policies - see auditconfig(1M)

	    Note, that "all" and "none" policies available as a
	    auditconfig(1M) policy flags actually means a full/empty set
	    of other policy flags. Thus they are not configurable in the
	    auditd service manifest, but set all the policies to true
	    (all) or false (none).
	-->
	<property_group name='policy' type='application' >
		<propval name='ahlt' type='boolean'
			value='false' />
		<propval name='arge' type='boolean'
			value='false' />
		<propval name='argv' type='boolean'
			value='false' />
		<propval name='cnt' type='boolean'
			value='true' />
		<propval name='group' type='boolean'
			value='false' />
		<propval name='path' type='boolean'
			value='false' />
		<propval name='perzone' type='boolean'
			value='false' />
		<propval name='public' type='boolean'
			value='false' />
		<propval name='seq' type='boolean'
			value='false' />
		<propval name='trail' type='boolean'
			value='false' />
		<propval name='windata_down' type='boolean'
			value='false' />
		<propval name='windata_up' type='boolean'
			value='false' />
		<propval name='zonename' type='boolean'
			value='false' />
		<propval name='read_authorization' type='astring'
			value='solaris.audit.config' />
	</property_group>

	</instance>

	<stability value='Evolving' />


	<template>
		<common_name>
			<loctext xml:lang='C'>
				Solaris audit daemon
			</loctext>
		</common_name>
		<documentation>
			<manpage title='auditd'
				section='1M'
				manpath='/usr/share/man'/>
			<manpage title='audit'
				section='1M'
				manpath='/usr/share/man'/>
			<manpage title='auditconfig'
				section='1M'
				manpath='/usr/share/man'/>
	         </documentation>
	</template>

</service>

</service_bundle>