OpenSolaris_b135/cmd/filesync/messages.h
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 1996 Sun Microsystems, Inc. All Rights Reserved
*
* module:
* messages.h
*
* purpose:
* contins defines for all localizable messages
*
* notes:
* unless otherwise specified, all %s arguments can be assumed
* to be file names. Non-obvious arguments are explained in
* comments.
*/
#ifndef _MESSAGES_H
#define _MESSAGES_H
#pragma ident "%W% %E% SMI"
#ifdef __cplusplus
extern "C" {
#endif
#include <libintl.h>
/*
* summary output messages
*/
#define SUM_hd "RECONCILE %s and %s (%d files)\n"
#define SUM_dst "\t-> %4d copies, %4d deletes, %4d ownership\n"
#define SUM_src "\t<- %4d copies, %4d deletes, %4d ownership\n"
#define SUM_unresolved "\tUNRESOLVED CONFLICTS: %d\n"
/*
* verbose mode analysis commentary
*/
#define V_nomore "# file %s no longer exists\n"
#define V_deleted "# file %s deleted from %s\n" /* src/dst */
#define V_created "# file %s created on %s\n" /* src/dst */
#define V_delconf "# file %s has been deleted and changed\n"
#define V_trunconf "# file %s has been truncated and changed\n"
#define V_unchanged "# file %s has two identical versions\n"
#define V_different "# file %s has two different versions\n"
#define V_modes "# file %s has changed modes/ownership\n"
#define V_changed "# file %s has been modified\n"
#define V_renamed "# file %s has been renamed to %s\n"
#define V_prunes "# %d stale entries pruned from baseline\n"
#define V_nostat "# WARNING: unable to stat file %s\n"
#define V_change "# WARNING: file %s on %s, was <%ld,%ld>#%ld, now <%ld,%ld>#%ld\n"
#define V_suppressed "# file %s not reconciled due to halt-on-error\n"
/*
* usage messages
*/
#define ERR_usage "Usage:"
#define USE_a "always check for Access Control Lists"
#define USE_e "everything must agree (modes, owner, group)"
#define USE_h "halt immediately after a file propagation error"
#define USE_m "modification times should be preserved"
#define USE_n "no touch (do not change any files)"
#define USE_q "quiet (do not list reconciliation commands)"
#define USE_v "verbose (commentary on each changed file)"
#define USE_y "yes (do not prompt for confirmations)"
#define USE_s "source directory for new rules"
#define USE_d "destination directory for new rules"
#define USE_r "restrict reconciliation to specified directories"
#define USE_f "force conflicts to resolve in favor of src/dst/old/new"
#define USE_o "one-way: only propagate changes from src/dst"
/*
* These are the basic usage scenario line, and in most cases should not
* be translated.
*/
#define USE_simple "[-mnqv] -s dir -d dir file ..."
#define USE_all "[-aehmnqvy] [-r dir] [-f src/dst/old/new] [-o src/dst]"
/*
* error messages
*/
#define ERR_open "ERROR: cannot open %s file %s\n"
#define ERR_creat "ERROR: unable to create %s file %s\n"
#define ERR_write "ERROR: write error in %s file %s\n"
#define ERR_fclose "ERROR: error in flushing and closing %s file %s\n"
#define ERR_chdir "ERROR: unable to chdir to %s\n"
#define ERR_rename "ERROR: unable to rename %s file %s to %s\n"
#define ERR_lock "ERROR: unable to lock %s file %s\n"
/*
* first %s argument is "rules" or "baseline"
*/
#define ERR_badinput "ERROR: invalid input at line %d, %s in %s\n"
/*
* first %s argument is a the name of the offending
* field (e.g. "mode" or "major dev"). The last
* %s argument is the name of the file being
* processed.
*/
#define ERR_badver "ERROR: bad version (%d.%d) found in %s file %s\n"
/*
* second %s is "rules" or "baseline"
* last %s is file name
*/
#define ERR_nocwd "ERROR: unable to get working directory for %s\n"
#define ERR_longname "ERROR: excessively long name %s\n"
#define ERR_undef "ERROR: undefined variable %s\n"
#define ERR_deep "ERROR: directory tree is too deep at directory %s\n"
#define ERR_badopt "ERROR: unrecognized option -%c %s\n"
/*
* the %c argument is the offending flag
* (e.g. -f or -o) and the %s is the argument
* that followed it.
*/
#define ERR_nofsync "ERROR: unable to find rule and baseline files\n"
#define ERR_badbase "ERROR: invalid BASE directory %s\n"
#define ERR_nosrc "ERROR: no source directory specified\n"
#define ERR_nodst "ERROR: no destination directory specified\n"
#define ERR_nonames "ERROR: no file/directory names specified and no rules file found\n"
#define ERR_tomany "ERROR: only %d -r arguments allowed\n"
#define ERR_rdwri "ERROR: cannot read/write file %s\n"
#define ERR_dirwac "ERROR: cannot create files in directory %s\n"
#define ERR_nomem "ERROR: unable to allocate memory for %s\n"
/*
* the %s argument is the name of a data structure
* that could not be allocated. It is only useful
* for telling the support person over the phone.
*/
#define ERR_badrun "ERROR: bad exit code from %s\n"
/*
* argument is a command from the rules file
*/
#define ERR_cannot "ERROR: %s %s\n"
/*
* The first %s argument will be a PROB_ string.
* The second %s argument is the file we were
* trying to do it to.
*/
#define ERR_abort_h "ERROR: aborting because of propagation failure\n"
#define WARN_ignore "WARNING: ignoring LIST rule for %s (illegal '.', '..', or '/')\n"
#define WARN_noacls "WARNING: ACLs are not supported for file %s\n"
#define WARN_deletes "WARNING: this operation might delete %d files\n"
#define WARN_rmdirs "WARNING: operation might delete %d non-empty directories\n"
#define WARN_ichange "WARNING: %d listed directories have changed Inode #s\n"
#define WARN_proceed "Press Enter to confirm, or interrupt to abort\n"
#define WARN_super "NOTE: there are ownership and protection conflicts that can only be\n resolved by the super user\n"
/*
* descriptions of problems in unreconcilable files
*/
#define PROB_del_change "deleted and changed"
#define PROB_different "two different versions"
#define PROB_ownership "different owners"
#define PROB_protection "different protections"
#define PROB_prohibited "blocked by -o switch"
#define PROB_aborted "aborted by -h switch"
#define PROB_chown "unable to chown"
#define PROB_chgrp "unable to chgrp"
#define PROB_chmod "unable to chmod"
#define PROB_chacl "unable to setfacl"
#define PROB_link "unable to link"
#define PROB_unlink "unable to unlink"
#define PROB_rmdir "unable to rmdir"
#define PROB_copy "unable to copy"
#define PROB_mknod "unable to mknod"
#define PROB_mkdir "unable to mkdir"
#define PROB_readlink "unable to read symlink"
#define PROB_symlink "unable to create symlink"
#define PROB_restat "unable to stat/restat"
#define PROB_deal "unable to deal with"
#define PROB_copyin "unable to open changed file"
#define PROB_copyout "unable to create new file"
#define PROB_botch "unable to safely setfacl"
#define PROB_rename "unable to rename"
#define PROB_rename2 "unable to rename/create"
#define PROB_read "read error"
#define PROB_write "write error"
#define PROB_space "insufficient space to copy"
/*
* text snippets
*/
#define TXT_src "source" /* for WARN_change */
#define TXT_dst "destination" /* for WARN_change */
#define TXT_srcdst "missing source/destination" /* for ERR_bad_input */
#define TXT_noargs "missing arguments" /* for ERR_bad_input */
#define TXT_badver "invalid version number" /* for ERR_bad_input */
#define TXT_nobase "LIST without a BASE" /* for ERR_bad_input */
#define TXT_rules "rules" /* for ERR_bad_ver */
#define TXT_base "baseline" /* for ERR_bad_ver */
#ifdef __cplusplus
}
#endif
#endif /* _MESSAGES_H */