OpenSolaris_b135/cmd/fm/dicts/SENSOR.po

#
# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# DO NOT EDIT -- this file is generated by the Event Registry.
#
#
# code: SENSOR-8000-09
# keys: fault.sensor.fan.failed
#
msgid "SENSOR-8000-09.type"
msgstr "Fault"
msgid "SENSOR-8000-09.severity"
msgstr "Minor"
msgid "SENSOR-8000-09.description"
msgstr "External sensors indicate that a fan is no longer operating\ncorrectly.  Refer to %s for more information."
msgid "SENSOR-8000-09.response"
msgstr "None."
msgid "SENSOR-8000-09.impact"
msgstr "The enclosure may be getting inadequate cooling.  If the problem\npersists, the components may overheat and the enclosure may shutdown."
msgid "SENSOR-8000-09.action"
msgstr "Check the fan to see if the fan has lost power or there is a\nphysical obstruction.  Replace the fan if the internal mechanism has failed.\n"
#
# code: SENSOR-8000-1N
# keys: fault.sensor.psu.failed
#
msgid "SENSOR-8000-1N.type"
msgstr "Fault"
msgid "SENSOR-8000-1N.severity"
msgstr "Minor"
msgid "SENSOR-8000-1N.description"
msgstr "External sensors indicate that a power supply is no longer operating correctly.  Refer to %s for more information."
msgid "SENSOR-8000-1N.response"
msgstr "None."
msgid "SENSOR-8000-1N.impact"
msgstr "The enclosure may be getting inadequate power.  Subsequent loss of power supplies may force the enclosure to shutdown."
msgid "SENSOR-8000-1N.action"
msgstr "Check to see if the power cord is connected properly.  Replace the power supply if the internal mechanism has failed.\n"
#
# code: SENSOR-8000-26
# keys: fault.fan.failed
#
msgid "SENSOR-8000-26.type"
msgstr "Fault"
msgid "SENSOR-8000-26.severity"
msgstr "Minor"
msgid "SENSOR-8000-26.description"
msgstr "External sensors indicate that a fan is no longer operating correctly.  Refer to %s for more information."
msgid "SENSOR-8000-26.response"
msgstr "None."
msgid "SENSOR-8000-26.impact"
msgstr "The enclosure may be getting inadequate cooling.  If the problem persists, the components may overheat and the enclosure may shutdown."
msgid "SENSOR-8000-26.action"
msgstr "Check the fan to see if the fan has lost power or there is a physical obstruction.  Replace the fan if the internal mechanism has failed.\n"
#
# code: SENSOR-8000-3T
# keys: fault.psu.failed
#
msgid "SENSOR-8000-3T.type"
msgstr "Fault"
msgid "SENSOR-8000-3T.severity"
msgstr "Major"
msgid "SENSOR-8000-3T.description"
msgstr "External sensors indicate that a power supply is no longer operating correctly.  Refer to %s for more information."
msgid "SENSOR-8000-3T.response"
msgstr "None."
msgid "SENSOR-8000-3T.impact"
msgstr "The enclosure may be getting inadequate power.  Subsequent loss of power supplies may force the enclosure to shutdown."
msgid "SENSOR-8000-3T.action"
msgstr "Check to see if the power cord is connected properly.  Replace the power supply if the internal mechanism has failed.\n"
#
# code: SENSOR-8000-40
# keys: fault.fan.failed-pred
#
msgid "SENSOR-8000-40.type"
msgstr "Fault"
msgid "SENSOR-8000-40.severity"
msgstr "Minor"
msgid "SENSOR-8000-40.description"
msgstr "A preditive failure sensor indicates that this fan has either failed or that a failure is imminent.\n	  Refer to %s for more information."
msgid "SENSOR-8000-40.response"
msgstr "None."
msgid "SENSOR-8000-40.impact"
msgstr "The enclosure may be getting inadequate cooling.  If the problem persists, the components may overheat and the enclosure may shutdown."
msgid "SENSOR-8000-40.action"
msgstr "Check the fan to see if the fan has lost power or there is a physical obstruction.  Replace the fan if the internal mechanism has failed.\n"
#
# code: SENSOR-8000-5V
# keys: fault.psu.failed-pred
#
msgid "SENSOR-8000-5V.type"
msgstr "Fault"
msgid "SENSOR-8000-5V.severity"
msgstr "Minor"
msgid "SENSOR-8000-5V.description"
msgstr "A preditive failure sensor indicates that this power supply has either failed or that a failure is imminent.  Refer to %s for more information."
msgid "SENSOR-8000-5V.response"
msgstr "None."
msgid "SENSOR-8000-5V.impact"
msgstr "The enclosure may be getting inadequate power.  Subsequent loss of power supplies may force the enclosure to shutdown."
msgid "SENSOR-8000-5V.action"
msgstr "Check to see if the power cord is connected properly.  Replace the power supply if the internal mechanism has failed.\n"
#
# code: SENSOR-8000-6G
# keys: fault.psu.failed-int
#
msgid "SENSOR-8000-6G.type"
msgstr "Fault"
msgid "SENSOR-8000-6G.severity"
msgstr "Major"
msgid "SENSOR-8000-6G.description"
msgstr "A sensor indicates that this power supply has failed.  Refer to %s for more information."
msgid "SENSOR-8000-6G.response"
msgstr "None."
msgid "SENSOR-8000-6G.impact"
msgstr "The enclosure may be getting inadequate power.  Subsequent loss of power supplies may force the enclosure to shutdown."
msgid "SENSOR-8000-6G.action"
msgstr "Replace the indicated power supply"
#
# code: SENSOR-8000-7L
# keys: fault.psu.failed-ext
#
msgid "SENSOR-8000-7L.type"
msgstr "Fault"
msgid "SENSOR-8000-7L.severity"
msgstr "Major"
msgid "SENSOR-8000-7L.description"
msgstr "A sensor indicates that this power supply is not operating properly due to some external condition  Refer to %s for more information."
msgid "SENSOR-8000-7L.response"
msgstr "None."
msgid "SENSOR-8000-7L.impact"
msgstr "The enclosure may be getting inadequate power.  Subsequent loss of power supplies may force the enclosure to shutdown."
msgid "SENSOR-8000-7L.action"
msgstr "Check to see if the power cord is connected properly or if there are other conditions that may be causing inadequate power to be provided to the indicated power supply.\n"