OpenSolaris_b135/cmd/terminfo/ansi.ti

#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License").  You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 1995 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#

#	Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
#	  All Rights Reserved

#ident	"%Z%%M%	%I%	%E% SMI"
# # ANSI - standards and other nonexistent terminals emulated in software.
#
# Manufacturer:	ANSI - Generic
# Class:	III
# 
# Info:
#	This category is used for terminals people "make up" in software
#	that do not represent a particular piece of hardware. This 
#	includes standards, such as the ANSI standard, as well as 
#	emulator programs that accept a particular set of escape 
#	sequences.
#	
#	ANSI capabilities are broken up into pieces, so that a terminal
#	implementing some ANSI subset can use many of them.
#
ansi+local,
	cud=\E[%p1%dB, cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA,
ansi+local1,
	cud1=^J, cub1=^H, cuf1=\E[C, cuu1=\E[A,
ansi+tabs,
	ht=^I, cbt=\E[Z, hts=\EH, tbc=\E[3g,
ansi+inittabs,
	it#8, use=ansi+tabs,
ansi+erase,
	ed=\E[J, el=\E[K, clear=\E[H\E[J,
ansi+rca,
	hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
ansi+cup,
	cup=\E[%i%p1%d;%p2%dH, home=\E[H,
ansi+rep,
	rep=%p1%c\E[%p2%{1}%-%db,
ansi+idl,
	dl=\E[%p1%dM, il=\E[%p1%dL,
ansi+idl1,
	dl1=\E[M, il1=\E[L,
ansi+idc,
	dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, 
#	smir=\E6, rmir=\E6,	commented out by ehr3
ansi+arrows,
	kcuu1=\E[A, kcud1=\E[B, kcub1=\E[D, kcuf1=\E[C, khome=\E[H, kbs=^H,
ansi+sgr|ansi graphic renditions,
	rev=\E[7m, blink=\E[5m, invis=\E[8m, sgr0=\E[0m,
ansi+sgrso|ansi standout only,
	rmso=\E[m, smso=\E[7m,
ansi+sgrul|ansi underline only,
	rmul=\E[m, smul=\E[4m,
ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
	bold=\E[1m,
	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
	use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
	dim=\E[2m,
	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;m,
	use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
ansi+pp|ansi printer port,
	mc4=\E[4i, mc5=\E[5i, mc0=\E[0i,
# Info:
#	ANSI is a vanilla ANSI terminal. This is assumed to implement 
#	all the normal ANSI stuff with no extensions. It assumes 
#	insert/delete line/char is there, so it won't work with 
#	vt100 clones. It assumes video attributes for bold, blink, 
#	underline, and reverse, which won't matter much if the terminal 
#	can't do some of those. Padding is assumed to be zero, which 
#	shouldn't hurt since xon/xoff is assumed.
#	
#	We assume a 24x80 screen. This entry was derived from the 
#	Ann Arbor Ambassador, and is untested.
#
ansi|generic ansi standard terminal,
	use=vanilla, am, cols#80, lines#24, xon,
	use=ansi+cup, use=ansi+rca,
	use=ansi+erase,
	use=ansi+tabs,
	use=ansi+local1, use=ansi+local,
	use=ansi+idc, use=ansi+idl1, use=ansi+idl,
	use=ansi+rep,
	use=ansi+sgrbold, use=ansi+arrows,
# Info:
#	Bare minimum ANSI terminal. This should work on anything, but 
#	beware of screen size problems and memory relative cursor 
#	addressing.
#
minansi|minimum ansi standard terminal,
	am, xon, use=vanilla, cols#80, lines#24,
	use=ansi+cup, use=ansi+erase,
# Info:
#	This terminal type is for ANSI terminals with ONLY memory 
#	relative cursor addressing and more than one page of memory.
#	It uses local motions instead of direct cursor addressing, 
#	and makes almost no assumptions. It does assume auto margins, 
#	no padding and/or xon/xoff, and a 24x80 screen.
#
mransi|mem rel cup ansi,
	am, use=vanilla, cols#80, lines#24, xon,
	use=ansi+erase, use=ansi+local1,
# Info:
#	Columbus UNIX virtual terminal. This terminal also appears in 
#	UNIX 4.0 and successors as line discipline 1 (?), but is 
#	undocumented and does not really work quite right.
#
virtual|cbunix|cb-unix|cb-unix virtual terminal,
	cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, am, clear=\EJ,
	cub1=^H, cup=\EG%p2%c%p1%c, cuf1=\EC, cuu1=\EA, el=\EK,
	ed=\EL, il1=\EP, dl1=\EN, ich1=\EO, dch1=\EM, lm#0, da, db,
	kcub1=\ED, kcuf1=\EC, kcuu1=\EA, kcud1=\EB, khome=\EE,
	smso=\Ea\004, rmso=\Eb\004, smul=\Ea\001, rmul=\Eb\001,
# Info:
#	This terminal is based on virtual but cleans up a few problems 
#	with control characters in parameter strings. It is implemented 
#	in mrh's window manager.
#
pty|4bsd pty terminal,
	smso=\Ea$, rmso=\Eb$, smul=\Ea!, rmul=\Eb!,
	cup=\EG%p1%' '%+%c%p2%' '%+%c, use=virtual,
# Info:
#	A dumb terminal with 1 line which is a fake status line.
#	This is useful to run sysline in in a multi-window environment.
#
1line|one_line|one line window,
	cr=^M, ind=^J, cols#80, lines#1, am, ht=^I, cub1=^H,
	hs, tsl=\n,
# Info:
#	1linepty is like 1line but the 1 line window is smarter,
#	with standout, cursor addressing, and clear to eol.
#
1linepty|one_linepty|1 line window in a pty,
	smso=\Ea$, rmso=\Eb$, smul=\Ea!, rmul=\Eb!,
	cup=\EG%p1%' '%+%c%p2%' '%+%c, tsl=\r\EK\EG %p2%' '%+%c,
	eslok, use=1line,
vanilla,
	bel=^G, cr=^M, cud1=^J, ind=^J,
datakit,
	am, gn,
	cols#80,
	bel=^G, cr=\r, cud1=\n, ind=\n,