OpenSolaris_b135/cmd/terminfo/att.ti
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2007 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
# All Rights Reserved
#ident "%Z%%M% %I% %E% SMI"
# # --------------------------------
#
# att: AT&T
#
# Manufacturer: AT&T
# Class: I
2300|att2300|ATT2300|sv80|AT&T 2300 Video Information Terminal 80 column mode @(#)2300.ti 1.1,
am, xon, eo, mir, msgr,
cols#80, lines#24, it#8,
bel=^G,
cub=\E[%p1%dD, cub1=\b,
cuf=\E[%p1%dC, cuf1=\E[C,
cud=\E[%p1%dB, cud1=\n,
cuu=\E[%p1%dA, cuu1=\E[A,
cup=\E[%i%p1%d;%p2%dH,
ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L,
dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M,
smso=\E[7m, rmso=\E[0m, rev=\E[7m,
cr=\r, ind=\n,
ht=\t, smir=\E[4h, rmir=\E[4l,
home=\E[H, clear=\E[H\E[J, ed=\E[J, el=\E[K, el1=\E[1K,
kf1=\E[1r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r,
kf5=\E[5r, kf6=\E[6r, kf7=\E[7r, kf8=\E[8r,
kf9=\E[9r, kf10=\E[10r, kf11=\E[11r, kf12=\E[12r,
kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, kf16=\E[16r,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
khome=\E[H, kclr=\E[J, kcbt=\E[Z, kbs=\b,
kil1=\E[L, kich1=\E[@, kdl1=\E[M, kdch1=\E[P,
mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
sgr0=\E[m,
2350|att2350|ATT2350|AT&T 2350 Video Information Terminal 80 column mode @(#)2300.ti 1.1,
mc0@, mc4@, mc5@, use=att2300,
2300-x40|att2300-x40|ATT2300-x40|sv40|AT&T 2300 Video Information Terminal 40 column mode @(#)2300.ti 1.1,
cols#40, lines#23, it#5, il@, il1@, use=att2300,
2350-x40|att2350-x40|ATT2350-x40|AT&T 2350 Video Information Terminal 40 column mode @(#)2300.ti 1.1,
cols#40, lines#23, it#5, il@, il1@, use=att2350,
#
# AT&T 386 monocrome console
#
AT386-M|at386-m|386AT-M|386at-m|at/386 console @(#)386.ti 1.4,
am, bw, eo, xon,
cols#80, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB,
cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%02d;%p2%02dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[1M,
ed=\E[J, el=\E[K, flash=^G, home=\E[H, ht=\t,
ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10m,
kbs=\b, kcbt=^], kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y,
kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, knp=\E[U,
kpp=\E[V, krmir=\E0, pfx=\EQ%p1%{1}%-%d'%p2%s',
rev=\E[7m, rin=\E[S, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;12%;%?%p7%t;9%;m,
sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
#
# AT&T 386 color console
#
AT386|at386|386AT|386at|at/386 console @(#)386.ti 1.4,
colors#8, ncv#3, pairs#64,
op=\E[0m,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4
%e%p1%{3}%=%t6
%e%p1%{4}%=%t1
%e%p1%{6}%=%t3
%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4
%e%p1%{3}%=%t6
%e%p1%{4}%=%t1
%e%p1%{6}%=%t3
%e%p1%d%;m,
use=at386-m,
AT386-DOS-M|at/386 console for 437 codeset @(#)386.ti 1.4,
acsc=``a~ffggjYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
use=at386-m,
AT386-DOS|at/386 console for 437 codeset @(#)386.ti 1.4,
acsc=``a~ffggjYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
use=at386,
33|tty33|tty|AT&T model 33 teletype @(#)33.ti 1.1,
xon,cr=^M, cud1=^J, ind=^J, bel=^G, cols#72, hc, os,
35|tty35|AT&T model 35 teletype @(#)35.ti 1.1,
use=tty33,
37|tty37|AT&T model 37 teletype @(#)37.ti 1.1,
xon,cr=^M, cud1=^J, ind=^J, bel=^G,
cub1=^H, hc, hu=\E8, hd=\E9, cuu1=\E7, os,
# Info:
# The Dataspeed 40's print a visible newline indicator after
# each newline. The 40-1 is a half duplex terminal.
# and is described here. The 40-4 is a 3270 lookalike
#
# The terminal has blinking standout. It also has visible bell
# but I don't know it - it's null here to prevent it from showing
# the BL character.
#
# I am not sure if the 40 has xmc, it looked like it didn't.
#
# Note also that the control characters have been randomly
# rearranged, for example, to get escape you type control-P and
# cntrol-H generates GS, group separator!
#
#
# \EX will get terminal out of protect mode but there doesn't
# appear to be a mnemonic for it (\EW will put it into protect).
#
# When printer is enabled all received characters are printed - no
# print screen is provided. Most delays are pure guesswork.
#
# Watch out for the visible newline symbol. Note that
# the editing and cursor controls do not work in S/R mode except
# for cursor left arrow which generates the backspace character.
#
# Note also that many control codes echo visibly while the
# corresponding escape sequences do not; for example, both ^K
# and \EC move the cursor right one place, but the former
# prints a VT symbol, too.
#
40|tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2 @(#)40.ti 1.1,
clear=\EH$<20>\EJ$<80>, ed=\EJ$<75>, il1=\EL$<50>, dl1=\EM$<50>,
dch1=\EP$<50>, ich1=\E\^$<50>, cuf1=\EC, cuu1=\E7, cub1=^H, cr=\EG,
ind=\ES$<20>, cud1=\EB, cols#80, lines#24, smso=\E3, rmso=\E4,
xon,kbs=\035, kcub1=^H, rs2=^S\ER$<60>, hts=\E1, home=\EH$<10>,
ri=\ET$<10>, tbc=\EH\E2$<80>, mc5=^R$<2000>, mc4=^T, ht=\E@$<10>,
43|tty43|AT&T model 43 teletype @(#)43.ti 1.1,
xon,cr=^M, cud1=^J, ind=^J, bel=^G,
kbs=^h, am, cub1=^H, hc, os, cols#132,
# Info:
# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
# Seems upward compatible with vt100, plus ins/del line/char.
# On sgr, the protection parameter is ignored.
# No check is made to make sure that only 3 parameters are output.
# standout= reverse + half-intensity = 3 | 5.
# bold= reverse + underline = 2 | 3.
# note that half-bright blinking doesn't look different from
# normal blinking.
#
# NOTE:you must program the function keys first, label second!
#
ATT4410v1|ATT5410v1|att5410v1|att4410v1|4410v1|tty5410v1|5410v1|AT&T 4410/5410 terminal in 80 column mode - version 1 @(#)4410.ti 1.4,
am, hs, mir, msgr, xon,
cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
acsc=``aaffhhggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~00++--\,\,..,
is1=\E[?3l\E)0,
is2=\E[0m^O,
bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[H\E[J,
cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=\b, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[P, dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K,
fsl=\E8, home=\E[H, ht=\t, ich1=\E[@, il1=\E[L,
ind=\n, invis=\E[8m,
is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s\sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s\s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s\s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q\s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s\s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s\s\s\s\EOW,
kbs=\b, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=\r\n,
pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
sgr0=\E[m^O, smacs=^N, smso=\E[2;7m, smul=\E[4m,
tsl=\E7\E[25;%p1%{1}%+%dH,
att4410v1-w|ATT4410v1-w|att5410v1-w|ATT5410v1-w|4410v1-w|tty5410v1-w|5410v1-w|AT&T 4410/5410 terminal in 132 column mode - version 1 @(#)4410.ti 1.4,
cols#132,is1=\E[?3h\E)0,rs2=\Ec\E[?3h\E[2;0y,wsl#132,use=4410v1,
att4410|ATT4410|att5410|ATT5410|4410|tty5410|5410|AT&T 4410/5410 terminal in 80 column mode - version 2 @(#)4410.ti 1.4,
pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
use=4410v1,
ATT4410-nfk|att4410-nfk|att5410-nfk|ATT5410-nfk|4410-nfk|tty5410-nfk|5410-nfk|version 1 AT&T 4410/5410 entry without function keys @(#)4410.ti 1.4,
pln@, is3@, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4410,
att5410-w|ATT5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode @(#)4410.ti 1.4,
cols#132, is1=\E[?3h\E)0,rs2=\Ec\E[?3h\E[2;0y, wsl#132,
use=att4410,
5410-nsl|att5410-nsl|ATT5410-nsl|4410-nsl|att4410-nsl|ATT4410-nsl|tty5410-nsl|tty5410 entry without pln defined @(#)4410.ti 1.4,
pln@,
use=tty5410,
otty5410|teletype 5410 for S5R2 curses @(#)4410.ti 1.4,
tsl=\E7\E[25;%p1%{1}%+%dH,
use=tty5410,
# Info:
# 5410 in terms of a vt100
#
v5410| 5410 in terms of a vt100 @(#)4410.ti 1.4,
am, mir, msgr, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
cub1=\b, cud1=\n, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=\t, hts=\EH, ich1=\E[@,
il1=\E[L, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr,
kbs=\b, kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP,
kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmkx=\E[?1l\E>,
rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;$<2>,
sgr0=\E[m^O$<2>, smacs=^N$<2>, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
# Info:
#
# Teletype Model 5420 -- A souped up 5410, with multiple windows,
# even! the 5420 has three modes: scroll, window or page mode
# this terminfo should work in scroll or window mode, but doesn't
# take advantage of any of the differences between them.
#
ATT4415|att4415|4415|tty5420|att5420|ATT5420|5420|AT&T 4415/5420 in 80 column mode @(#)4415.ti 1.4,
# Info:
# Memory below (2 lines!)
#
xon,db, mir,
# Info:
# 3 pages of memory (plus some spare)
#
nlab#8, lh#2, lw#8, wsl#55, lm#78,
cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuu=\E[%p1%dA,
# Info:
# The 5410 sequences would work for these, but these
# work in both scroll and window mode...
#
cup=\E[%i%p1%d;%p2%dx,
cvvis=\E[11;1j, dch=\E[%p1%dP, dl=\E[%p1%dM,
ech=\E[%p1%ds\E[%p1%dD,
flash=\E[?5h$<200>\E[?5l,
home=\E[x, hpa=\E[%p1%{1}%+%dG, hts=\EH,
# Info:
# Unset insert character so insert mode works
#
ich1@, ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dE,
# Info:
# set 80 column mode,
#
is1=\E[?3l$<100>,
# is2 escape sequence:
# 1) turn off all fonts
# 2) function keys off, keyboard lock off, control display off,
# insert mode off, erasure mode off,
# 3) full duplex, monitor mode off, send graphics off, nl on lf off
# 4) reset origin mode
# 5) set line wraparound
# 6) exit erasure mode, positional attribute mode, and erasure extent mode
# 7) clear margins
# 8) program ENTER to transmit ^J,
# We use \212 to program the ^J because a bare ^J will get translated by
# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
# 1 2 3 4 5 6 7 8
#
is2=\E[0m^O\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
# Info:
# set screen color to black,
#
is3=\E[?5l,
kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
# info:
# No representation in terminfo for the delete word key
# kdw1=\Ed
#
kel=\E[2K, kend=\Ez, kent=\Eent,
# Info:
# This assumes the power-up send sequence...
#
kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf,
kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu,
knp=\E[U, kpp=\E[V, kri=\E[S,
lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8,
ll=\Ew, mc0=\E[?2i, mc4=\E[4i, mc5=\E[5i,
mrcup=\E[%i%p1%d;%p2%dt,
pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s,
rmln=\E|, smln=\E~, prot=\EV, rin=\E[%p1%dF,
# Info:
# This rmcup is not strictly necessary, but it helps maximize
# memory usefulness
# rmcup=\Ez,
#
rmir=\E[4l, rmkx=\E[19;0j\E[21;1j\212, sgr0=\E[0m^O,
# Info:
# sgr0=\E[0m\EW^O,
#
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
# Info:
# sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;,
#
smir=\E[4h,
# Info:
# This programs the SYS PF keys to send a set sequence.
# It also sets up labels f1, f2, ..., f8, and sends edit keys.
# This string causes them to send the strings kf1-kf8
# when pressed in SYS PF mode.
#
smkx=\E[19;1j\E[21;4j\Eent, tbc=\E[3g,
tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
use=att4410,
ATT4415-w|att4415-w|4415-w|tty5420-w|att5420-w|ATT5420-w|5420-w|AT&T model 4415/5420 in 132 column mode @(#)4415.ti 1.4,
lm#54, cols#132, wsl#97,
# Info:
# set 132 column mode,
#
is1=\E[?3h$<100>,
use=att4415,
ATT4415-rv|att4415-rv|4415-rv|tty5420-rv|att5420-rv|ATT5420-rv|5420-rv|AT&T model 4415/5420 80 columns in reverse video @(#)4415.ti 1.4,
flash=\E[?5l$<200>\E[?5h,
# Info:
# set screen color to white,
#
is3=\E[?5h,
use=att4415,
ATT4415-w-rv|att4415-w-rv|4415-w-rv|tty5420-w-rv|att5420-w-rv|ATT5420-w-rv|5420-w-rv|AT&T model 4415/5420 132 columns in reverse video @(#)4415.ti 1.4,
lm#54, cols#132, wsl#97,
flash=\E[?5l$<200>\E[?5h,
# Info:
# set 132 column mode,
#
is1=\E[?3h$<100>,
# Info:
# set screen color to white,
#
is3=\E[?5h,
use=att4415,
# Info:
# Note that this mode permits programming USER PF KEYS and labels
# However, when you program user pf labels you have to reselect
# user pf keys to make them appear!
#
ATT4415+nl|att4415+nl|4415+nl|tty5420+nl|att5420+nl|ATT5420+nl|5420+nl|generic AT&T 4415/5420 changes for not changing labels @(#)4415.ti 1.4,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
ATT4415-nl|att4415-nl|4415-nl|tty5420-nl|att5420-nl|ATT5420-nl|5420-nl|AT&T 4415/5420 without changing labels @(#)4415.ti 1.4,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
use=att4415+nl, use=att4415,
ATT4415-rv-nl|att4415-rv-nl|4415-rv-nl|tty5420-rv-nl|5420-rv-nl|ATT5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels @(#)4415.ti 1.4,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
use=att4415+nl, use=att4415-rv,
ATT4415-w-nl|att4415-w-nl|4415-w-nl|tty5420-w-nl|5420-w-nl|att5420-w-nl|ATT5420-w-nl|AT&T 4415/5420 132 cols without changing labels @(#)4415.ti 1.4,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
use=att4415+nl, use=att4415-w,
ATT4415-w-rv-n|att4415-w-rv-n|4415-w-rv-nl|tty5420-w-rv-n|5420-w-rv-nl|att5420-w-rv-n|ATT5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels @(#)4415.ti 1.4,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
use=att4415+nl, use=att4415-w-rv,
otty5420|teletype 5420 for SVR2 curses on the 3B-20's @(#)4415.ti 1.4,
hpa=\E[%p1%{1}%+%dG,
vpa=\E[%p1%{1}%+%dd,
use=tty5420,
att5420_2|ATT5420_2|5420_2|AT&T 5420 model 2 in 80 column mode @(#)4415.ti 1.4,
am, db, hs, mir, msgr, xon,
cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8,
wsl#55,
blink=\E[5m, bold=\E[4;7m, cbt=\E[1Z, clear=\EH\EJ,
cnorm=\E[11;0j, cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
cub1=\b, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
home=\E[0;0H, hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
ind=\n, indn=\E[%p1%dE, invis=\E[8m,
is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
kbeg=\Et, kbs=\b, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc,
kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh,
kf7=\EOi, kf8=\EOj, khome=\E[H, kich1=\E[4h,
kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, kpp=\E[V,
kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i,
mc4=\E[4i, mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt,
nel=\r\n,
pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s\E~,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O,
rmkx=\E[19;0j, rmln=\E|, rmso=\E[m, rmul=\E[m,
rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
sgr0=\E[0m^O, smacs=^N, smkx=\E[19;1j,
smln=\E~, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
att5420_2-w|ATT5420_2-w|5420_2-w|AT&T 5420 model 2 in 132 column mode @(#)4415.ti 1.4,
cols#132,
is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
use=5420_2,
4418|att4418|ATT4418|5418|att5418|ATT5418|AT&T 5418 in 80 column mode @(#)4418.ti 1.2,
am, xon,
cols#80, lines#24,
bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r,
cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
home=\E[H, ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL,
il1=\E[1L, ind=\n, is1=\E[?3l, is2=\E)0\E?6l\E?5l,
kclr=\E[%, kcub1=\E@, kcud1=\EU, kcuf1=\EA, kcuu1=\ES,
khome=\Ec, kent=\E[, kf1=\E[h, kf10=\E[m, kf11=\E[n, kf12=\E[o,
kf13=\E[H, kf14=\E[I, kf15=\E[J, kf18=\E[K, kf19=\E[L,
kf2=\E[i, kf20=\E[E, kf21=\E[_, kf22=\E[M, kf23=\E[N,
kf24=\E[O, kf3=\E[j, kf6=\E[k, kf7=\E[l, kf8=\E[f,
kf9=\E[w, rc=\E8, rev=\E[7m, rmacs=^O, rmso=\E[0m,
rmul=\E[0m, sc=\E7, sgr0=\E[0m^O, smacs=^N, smso=\E[7m,
smul=\E[4m,
4418-w|att4418-w|ATT4418-w|5418-w|att5418-w|ATT5418-w|AT&T 5418 in 132 column mode @(#)4418.ti 1.2,
cols#132,is1=\E[?3h,use=5418,
4420|tty4420|teletype 4420 @(#)4420.ti 1.1,
xon,da, db, eo, msgr, ul,lm#72,
cols#80, lines#24,
bel=^G, clear=\EH\EJ, cr=\EG,
cuu1=\EA, cud1=\EB,cuf1=\EC,cub1=\ED,
cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA,
dch1=\EP, dl1=\EM, ed=\EJ, el=\Ez, il1=\EL,
home=\EH,
ind=\EH\EM\EY7 , kcub1=\b, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kf0=\EU, kf3=\E@,
lf0=segment advance, lf3=cursor tab,
kind=\ES, kri=\ET, kcbt=\EO, kclr=\EJ,
kil1=\EL, kdl1=\EM, kich1=\E\^, kdch1=\EP, khome=\EH,
rmdc@, rmso=\E~, rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
# Info:
# The following is a termcap entry for the Teletype 4424
# asyncronous keyboard-display terminal. It supports
# the vi editor. The terminal must be "set up" as follows,
#
# HIGHLIGHT DEFINITION 3-TONE
# DISPLAY FUNCTION GROUP III
#
# The second entry below provides limited (a la adm3a)
# operation under GROUP II.
#
# This must be used with DISPLAY FUNCTION GROUP I or III
# and HIGHLIGHT DEFINITION 3-TONE
#
4424|att4424|ATT4424|tty4424|4424-3|teletype 4424 @(#)4424.ti 1.7,
xon,cr=^M, ind=^J, bel=^G, cols#80, lines#24, am,
smso=\E[7m, rmso=\E~, rev=\E[7m, smul=\E[4m, rmul=\EZ, ri=\ET,
# Info:
# The terminal has either bold or blink, depending on options
#
xon,bold=\E[1m, blink=\E[5m,
ht=^I, cbt=\EO, home=\E[H, cuu1=\EA, cuu=\E[%p1%dA,
cud1=\EB, cud=\E[%p1%dB, cuf1=\EC, cuf=\E[%p1%dC,
smcup=\E[1m,
cub1=^H, cub=\E[%p1%dD, cup=\E[%i%p1%d;%p2%dH,
clear=\E[H\E[2J, ed=\EJ, el=\Ez, nel=\EE, hts=\EH, tbc=\EF,
smacs=\E(0, rmacs=\E(B, is2=\E[20l\E[?7h, csr=\E[%i%p1%d;%p2%dr,
il1=\EL, il=\E[%p1%dL, dl1=\EM, dl=\E[%p1%dM,
ich1=\E\^, ich=\E[%p1%d@, dch1=\EP, dch=\E[%p1%dP,
sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p6%t;1%;%?%p4%t;5%;m,
sgr0=\EX\E~\EZ\E4\E(B,
kcuu1=\E[A, kcud1=\E[B, kcub1=\E[D, kcuf1=\E[C, khome=\E[H, kbs=^H, kclr=\EJ,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4424-1|att4424-1|ATT4424-1|tty4424-1|teletype 4424 in display function group I @(#)4424.ti 1.7,
kclr@,kcub1=\ED,kcud1=\EB,kcuf1=\EC,kcuu1=\EA,khome@,use=4424,
# Info:
# The Teletype 5425 is really version 2 of the Teletype 5420. It
# is quite similar, except for some minor differences. No page
# mode, for example, so all of the cup sequences used above have
# to change back to what's being used for the 5410. Many of the
# option settings have changed their numbering as well.
#
# This has been tested on a preliminary model.
#
ATT4425|ATT5425|att5425|4425|5425|tty5425|att4425|AT&T 4425/5425 @(#)4425.ti 1.4,
am, da, db, hs, mir, msgr, xenl, xon,
cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8,
wsl#55,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[4;7m, cbt=\E[Z,
clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD,
ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
invis=\E[8m, is1=\E<\E[?3l$<100>,
is2=\E[0m^O\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
is3=\E[?5l, kbeg=\Et, kbs=\b, kcbt=\E[Z, kclr=\E[J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[P, kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent,
kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, kich1=\E[4h,
kil1=\E[L, kind=\E[T, kri=\E[S, ll=\E[24H, mc0=\E[?2i,
mc4=\E[4i, mc5=\E[5i, nel=\r\n,
pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%1d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O,
rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, rmso=\E[m,
rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
sgr0=\E[m^O, smacs=^N, smir=\E[4h, smkx=\E[21;1j\E[25;4j\Eent\E~,
smln=\E~, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
ATT4425-nl|ATT5425-nl|att5425-nl|4425-nl|5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 without label change 80 column mode @(#)4425.ti 1.4,
smkx=\E[21;1j\E[25;4j\Eent,use=4425,
ATT4425-nl-w|ATT5425-nl-w|att5425-nl-w|4425-nl-w|5425-nl-w|tty5425-nl-w|att4425-nl-w|AT&T 4425/5425 without label change 132 column mode @(#)4425.ti 1.4,
smkx=\E[21;1j\E[25;4j\Eent,use=4425-w,
4425-fk|5425-fk|tty5425-fk|att4425-fk|AT&T 4425/5425 without function keys @(#)4425.ti 1.4,
smkx@,rmkx@,use=5425,
ATT4425-w|att5425-w|ATT5425-w|att4425-w|4425-w|5425-w|tty5425-w|teletype 4425/5425 in 132 column mode @(#)4425.ti 1.4,
lm#54, cols#132, wsl#97,
# Info:
# set 132 column mode,
#
is1=\E[?3h$<100>,
use=tty5425,
4425-w-fk|5425-w-fk|tty5425-w-fk|att4425-w-fk|ATT4425-w-fk|att5425-w-fk|ATT5425-w-fk|AT&T 4425/5425 without function keys in wide mode @(#)4425.ti 1.4,
smkx@,rmkx@,use=5425-w,
4426|att4426|ATT4426|tty4426|teletype 4426S @(#)4426.ti 1.2,
am,xon,
is1=\Ec\E[?7h,
bel=^G,
bold=\E[5m,
clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
cols#80,
cr=^M,
cub1=\E[D,
cub=\E[%p1%dD,
cud1=\E[B,
cud=\E[%p1%dB,
cuf1=\E[C,
cuf=\E[%p1%dC,
cup=\E[%i%p1%d;%p2%dH,
cuu1=\EA,
cuu=\E[%p1%dA,
dch1=\EP,
dch=\E[%p1%dP,
dl1=\E[M,
dl=\E[%p1%dM,
ed=\E[J,
el=\E[0K,
home=\E[H,
hpa=\E[%p1%dG,
hts=\E1,
ht=\t,
ich1=\E\^,
ich=\E[%p1%d@,
il1=\EL,
il=\E[%p1%dL,
ind=\ES,
ind=^J,
indn=\E[%p1%dS,
is2=\E[m\E[1;24r,
kbs=^H,
kcbt=\EO,
kclr=\E[2J,
kcub1=\ED,
kcud1=\EB,
kcuf1=\EC,
kcuu1=\EA,
kf1=\EOP,
kf2=\EOQ,
kf3=\EOR,
kf4=\EOS,
kf5=\EOT,
kf6=\EOU,
kf7=\EOV,
kf8=\EOW,
khome=\E[H,
kll=\E[24;1H,
lines#24,
ll=\E[24H,
nel=^M^J,
rc=\E8,
rev=\E[7m,
ri=\EM,
ri=\ET,
ri=\E[1U,
rin=\E[%p1%dT,
rmacs=\E(B,
rmso=\E[0m,
rmul=\E[0m,
rmul=\E[m,
rs2=\Ec\E[?3l\E[2;0y,
sc=\E7,
sgr0=\E[0m\E(B,
smacs=\E(0,
smso=\E[5m,
smul=\E[4m,
smul=\E[4m,
tbc=\E[3g,
lm#48,da,db,
vpa=\E[%p1%dd,
# Terminfo entry for the AT&T 510 A Personal Terminal
# Function keys 9 - 16 are available only after the
# screen labeled (soft keys/action blocks) are labeled. Function key
# 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
#
#
# This entry is based on one done by Ernie Rice at Summit, NJ and
# changed by Anne Gallup, Skokie, IL, ttrdc!anne
#
att510a|510a|bct510a|510A|AT&T 510A Personal Terminal @(#)510a.ti 1.3,
am,
xenl,
mir,
msgr,
xon,
cols#80,
lines#24,
nlab#8,
lh#2,
lw#7,
cbt=\E[Z,
bel=^G,
cr=^M,
tbc=\E[3g,
clear=\E[H\E[J,
el=\E[0K,
ed=\E[0J,
cup=\E[%i%p1%d;%p2%dH,
cud1=\E[1B,
home=\E[H,
cub1=^H,
cnorm=\E[11;3|,
cuf1=\E[C,
cuu1=\E[A,
civis=\E[11;0|,
cvvis=\E[11;2|,
dch1=\E[P,
dl1=\E[M,
smacs=^N,
blink=\E[5m,
bold=\E[2;7m,
dim=\E[2m,
rev=\E[7m,
smso=\E[7m,
smul=\E[4m,
rmacs=^O,
sgr0=\E[m^O,
rmso=\E[m,
rmul=\E[m,
ff=^L,
is3=\E[21;1|\212,
il1=\E[L,
kbs=^H,
kcud1=\E[B,
kf1=\EOm,
kf2=\EOV,
kf3=\EOu,
kf4=\ENj,
kf5=\ENe,
kf6=\ENf,
kf7=\ENh,
kf8=\E[H,
kf9=\EOc,
kf10=\EOd,
kf11=\EOe,
kf12=\EOf,
kf13=\EOg,
kf14=\EOh,
kf15=\EOi,
kf16=\EOj,
kcub1=\E[D,
kcuf1=\E[C,
kind=\E[S,
kri=\E[T,
kcuu1=\E[A,
nel=\EE,
dch=\E[%p1%dP,
dl=\E[%p1%dM,
cud=\E[%p1%dB,
il=\E[%p1%dL,
cub=\E[%p1%dD,
cuf=\E[%p1%dC,
cuu=\E[%p1%dA,
mc0=\E[0i,
mc4=\E[?8i,
mc5=\E[?4i,
rc=\E8,
sc=\E7,
ind=^J,
ri=\EM,
sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t^N%e^O%;,
hts=\EH,
ht=\t,
acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b,
pln=\E[%p1%dp%p2%:-16s,
kcbt=\E[Z,
enacs=\E(B\E)1,
kLFT=\E[u,
kRIT=\E[v,
el1=\E[1K,
is1=\E(B\E)1\E[2l,
# Terminfo entry for the AT&T 510 D Personal Terminal
# Function keys 9 through 16 are accessed by bringing up the
# system blocks.
# Function key 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
#
# There are problems with soft key labeling. These are due to
# strangenesses in the native terminal that are impossible to
# describe in a terminfo.
#
#
att510d|510d|bct510d|510D|AT&T 510D Personal Terminal @(#)510d.ti 1.2,
am,
da,
db,
mir,
msgr,
xenl,
xon,
cols#80,
lh#2,
lines#24,
lm#48,
lw#7,
nlab#8,
acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b,
bel=^G,
blink=\E[5m,
bold=\E[2;7m,
cbt=\E[Z,
clear=\E[H\E[J,
cnorm=\E[11;3|,
cr=^M,
cub1=^H,
cub=\E[%p1%dD,
cud1=\E[1B,
cud=\E[%p1%dB,
cuf1=\E[C,
cuf=\E[%p1%dC,
cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A,
cuu=\E[%p1%dA,
cvvis=\E[11;2|,
dch1=\E[P,
dch=\E[%p1%dP,
dim=\E[2m,
dl1=\E[M,
dl=\E[%p1%dM,
ed=\E[0J,
el1=\E[1K,
el=\E[0K,
enacs=\E(B\E)1,
ff=^L,
home=\E[H,
hpa=\E[%p1%{1}%+%dG,
hts=\EH,
ht=\t,
ich=\E[%p1%d@,
il1=\E[L,
il=\E[%p1%dL,
ind=^J,
indn=\E[%p1%dS,
invis=\E[8m,
is1=\E(B\E)1\E[5;0|,
is3=\E[21;1|\212,
kbs=^H,
kcbt=\E[Z,
kcub1=\E[D,
kcud1=\E[B,
kcuf1=\E[C,
kcuu1=\E[A,
kf10=\EOd,
kf11=\EOe,
kf12=\EOf,
kf13=\EOg,
kf14=\EOh,
kf15=\EOi,
kf16=\EOj,
kf1=\EOm,
kf2=\EOV,
kf3=\EOu,
kf4=\ENj,
kf5=\ENe,
kf6=\ENf,
kf7=\ENh,
kf8=\E[H,
kf9=\EOc,
kind=\E[S,
kLFT=\E[u,
kri=\E[T,
kRIT=\E[v,
ll=\E#2,
mc0=\E[0i,
mc4=\E[?8i,
mc5=\E[?4i,
mgc=\E:,
nel=\EE,
pln=\E[%p1%dp%p2%:-16s,
rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db,
rev=\E[7m,
ri=\EM,
rin=\E[%p1%dT,
rmacs=^O,
rmir=\E[4l,
rmkx=\E[19;0|,
rmln=\E<,
rmso=\E[m,
rmul=\E[m,
rmxon=\E[29;1|,
rs2=\E[5;0|,
sc=\E7,
sgr0=\E[m^O,
sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
smacs=^N,
smgl=\E4,
smgr=\E5,
smir=\E[4h,
smkx=\E[19;1|,
smln=\E?,
smso=\E[7m,
smul=\E[4m,
smxon=\E[29;0|,
tbc=\E[3g,
vpa=\E[%p1%{1}%+%dd,
ATT513|att513|513|att513-page|513-page|attis513-pfk|513bct|AT&T 513 Terminal using page mode @(#)513.ti 1.3,
am, chts, mir, msgr, xenl, xon,
cols#80, lh#2, lines#24, lw#8, nlab#8,
acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b,
bel=^G, blink=\E[5m, bold=\E[4;7m, cbt=\E[Z,
clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
el1=\E[1K, enacs=\E(B\E)1, home=\E[H,
hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
invis=\E[8m,
is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=\b,
kcan=\EOw, kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu,
kcpy=\ENd, kcrt=\EOn, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, kdl1=\ENe,
kel=\EOa, kend=\E0, kent=\Eent, kext=\EOk, kf1=\EOc,
kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh,
kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, khome=\E[H,
kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i,
mc5=\E[?98l\E[?4i, nel=\EE,
pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
pfx=\E[%p1%d;%p2%l%d;1;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
pln=\E[%p1%dp%p2%:-16s, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|\E[21;1|\212,
rmln=\E<, rmso=\E[m, rmul=\E[m,
rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
rs2=\E[5;0|, sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
sgr0=\E[m^O, smacs=^N, smir=\E[4h, smkx=\E[19;1|\E[21;4|\Eent,
smln=\E?, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%p1%{1}%+%dd,
ATT500|att500|bct500|500|BCT500|AT&T-IS 500 terminal @(#)513.ti 1.3,
use=att513,
# Info:
# 5620 terminfo (2.0 or later ROMS with char attributes)
#
# assumptions:
# ind (scroll forward one line) is only done at screen bottom
#
att5620|ATT5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns @(#)5620.ti 1.3,
npc,xon,am, cols#88, lines#70, it#8,
bel=^G, cr=^M, clear=\E[H\E[J,
ht=^I, nel=^J,
# Info:
# clear to end of line, screen
#
el=\E[K, ed=\E[J,
# Info:
# scroll screen up/down one/many lines
#
ind=\E[S, indn=\E[%p1%dS, ri=\E[T, rin=\E[%p1%dT,
# Info:
# cursor arbitrarily, down, home, left, right, up
# cup=\E[%i%p1%d;%p2%dH, home=\E[H,
#
cup=\E[%i%p1%d;%p2%dH, cud1=\E[B, home=\E[H,
cub1=^H, cuf1=\E[C, cuu1=\E[A,
# Info:
# delete/insert one/many characters/lines
#
dch1=\E[P, dch=\E[%p1%dP, dl1=\E[M, dl=\E[%p1%dM,
ich1=\E[@, ich=\E[%p1%d@, il1=\E[L, il=\E[%p1%dL,
# Info:
# sequences sent by keys: backspace, clear, down-arrow,
# home-arrow, left-arrow, home-down, right-arrow, up-arrow
#
kbs=^H, kclr=\E[2J, kcud1=\E[B, khome=\E[H,
kcub1=\E[D, kll=\E[70;1H, kcuf1=\E[C, kcuu1=\E[A,
# Info:
# program function keys, reset terminal, restore/store cursor
# position (padding in pfx cannot be used, since terminal doesn't
# have a padding character, but it is needed and FMLI extracts
# and uses this information
#
pfx=\E[%p1%d;%p2%l%dq%p2%s$<230/>,
rs1=\Ec, rc=\E8, sc=\E7,
# Info:
# set/clear underline/standout character attributes
#
smul=\E[4m, rmul=\E[0m,
smso=\E[7m, rmso=\E[0m,
# Info:
# reverse video, reset character attributes, pseudo-dim,
# pseudo-bold
#
rev=\E[7m, sgr0=\E[0m,
dim=\E[2m, bold=\E[2m,
att5620-24|ATT5620-24|5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer @(#)5620.ti 1.3,
lines#24, use=5620,
att5620-34|ATT5620-34|5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer @(#)5620.ti 1.3,
lines#34, use=5620,
#Info:
# Entries for kf15 thru kf28 refer to the shifted system pf keys.
#
# Entries for kf29 thru kf46 refer to the alternate keypad mode
# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
605|705|605bct|ATT605|att605|AT&T 605 80 column 102key keyboard @(#)605.ti 1.5,
am,
xenl,
hs,
eslok,
mir,
msgr,
xon,
cols#80,
it#8,
lh#2,
lines#24,
lw#8,
nlab#8,
wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G,
blink=\E[5m,
bold=\E[1m,
cbt=\E[Z,
civis=\E[?25l,
clear=\E[H\E[J,
cnorm=\E[?25h\E[?12l,
cr=^M,
csr=\E[%i%p1%d;%p2%dr,
cup=\E[%i%p1%d;%p2%dH,
cud1=\E[B,
cub=\E[%p1%dD,
cub1=^H,
cud=\E[%p1%dB,
cuf=\E[%p1%dC,
cuf1=\E[C,
cuu=\E[%p1%dA,
cuu1=\E[A,
cvvis=\E[?12;25h,
dch1=\E[P,
dch=\E[%p1%dP,
dim=\E[2m,
dl=\E[%p1%dM,
dl1=\E[M,
ed=\E[J,
el=\E[K,
el1=\E[1K,
flash=\E[?5h$<200>\E[?5l,
fsl=\E8,
home=\E[H,
ht=\t,
ich=\E[%p1%d@,
il=\E[%p1%dL,
il1=\E[L,
ind=\ED,
invis=\E[8m,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
is2=\E[0m^O,
is3=\E(B\E)0,
kbs=^H,
kcbt=\E[Z,
kclr=\E[2J,
kcub1=\E[D,
kcud1=\E[B,
kcuf1=\E[C,
kcuu1=\E[A,
kdch1=\E[P,
kdl1=\E[M,
kend=\E[24;1H,
kf1=\EOc,
kf2=\EOd,
kf3=\EOe,
kf4=\EOf,
kf5=\EOg,
kf6=\EOh,
kf7=\EOi,
kf8=\EOj,
kf9=\ENo,
kf10=\ENp,
kf11=\ENq,
kf12=\ENr,
kf13=\ENs,
kf14=\ENt,
kf15=\EOC,
kf16=\EOD,
kf17=\EOE,
kf18=\EOF,
kf19=\EOG,
kf20=\EOH,
kf21=\EOI,
kf22=\EOJ,
kf23=\ENO,
kf24=\ENP,
kf25=\ENQ,
kf26=\ENR,
kf27=\ENS,
kf28=\ENT,
kf29=\EOP,
kf30=\EOQ,
kf31=\EOR,
kf32=\EOS,
kf33=\EOw,
kf34=\EOx,
kf35=\EOy,
kf36=\EOm,
kf37=\EOt,
kf38=\EOu,
kf39=\EOv,
kf40=\EOl,
kf41=\EOq,
kf42=\EOr,
kf43=\EOs,
kf44=\EOp,
kf45=\EOn,
kf46=\EOM,
khome=\E[H,
kil1=\E[L,
kind=\E[S,
kich1=\E[@,
kpp=\E[V,
knp=\E[U,
kri=\E[T,
kLFT=\E[ A,
kRIT=\E[ @,
ll=\E[24H,
mc4=\E[?4i,
mc5=\E[?5i,
nel=\EE,
pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s,
rev=\E[7m,
ri=\EM,
rmacs=^O,
rmir=\E[4l,
rs2=\Ec\E[?3l,
rc=\E8,
rmso=\E[m,
rmln=\E[2p,
rmul=\E[m,
sgr0=\E[m^O,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
smacs=^N,
smir=\E[4h,
smso=\E[7m,
smul=\E[4m,
smln=\E[p,
sc=\E7,
tsl=\E7\E[25;%i%p1%dx,
605-w|605bct-w|ATT605-w|att605-w|AT&T 605-w 132 column 102 key keyboard @(#)605.ti 1.5,
cols#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
wsl#132,
use=605,
#Info:
# Entries for kf15 thru kf28 refer to the shifted system pf keys.
#
# Entries for kf29 thru kf46 refer to the alternate keypad mode
# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
605V2|605V2bct|ATT605V2|att605V2|AT&T 605V2 80 column 102key keyboard @(#)605V2.ti 1.5,
am,
xenl,
hs,
eslok,
mir,
msgr,
xon,
cols#80,
it#8,
lh#2,
lines#24,
lw#8,
nlab#8,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G,
blink=\E[5m,
bold=\E[1m,
cbt=\E[Z,
civis=\E[?25l,
clear=\E[H\E[J,
cnorm=\E[?25h\E[?12l,
cr=^M,
csr=\E[%i%p1%d;%p2%dr,
cup=\E[%i%p1%d;%p2%dH,
cud1=\E[B,
cub=\E[%p1%dD,
cub1=^H,
cud=\E[%p1%dB,
cuf=\E[%p1%dC,
cuf1=\E[C,
cuu=\E[%p1%dA,
cuu1=\E[A,
cvvis=\E[?12;25h,
dch1=\E[P,
dch=\E[%p1%dP,
dim=\E[2m,
dl=\E[%p1%dM,
dl1=\E[M,
ed=\E[J,
el=\E[K,
el1=\E[1K,
flash=\E[?5h$<200>\E[?5l,
fsl=\E8,
home=\E[H,
ht=\t,
ich=\E[%p1%d@,
il=\E[%p1%dL,
il1=\E[L,
ind=\ED,
invis=\E[8m,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
is2=\E[0m^O,
is3=\E(B\E)0,
kbs=^H,
kcbt=\E[Z,
kclr=\E[2J,
kcub1=\E[D,
kcud1=\E[B,
kcuf1=\E[C,
kcuu1=\E[A,
kdch1=\E[P,
kdl1=\E[M,
kend=\E[24;1H,
kf1=\EOc,
kf2=\EOd,
kf3=\EOe,
kf4=\EOf,
kf5=\EOg,
kf6=\EOh,
kf7=\EOi,
kf8=\EOj,
kf9=\ENo,
kf10=\ENp,
kf11=\ENq,
kf12=\ENr,
kf13=\ENs,
kf14=\ENt,
kf15=\EOC,
kf16=\EOD,
kf17=\EOE,
kf18=\EOF,
kf19=\EOG,
kf20=\EOH,
kf21=\EOI,
kf22=\EOJ,
kf23=\ENO,
kf24=\ENP,
kf25=\ENQ,
kf26=\ENR,
kf27=\ENS,
kf28=\ENT,
kf29=\EOP,
kf30=\EOQ,
kf31=\EOR,
kf32=\EOS,
kf33=\EOw,
kf34=\EOx,
kf35=\EOy,
kf36=\EOm,
kf37=\EOt,
kf38=\EOu,
kf39=\EOv,
kf40=\EOl,
kf41=\EOq,
kf42=\EOr,
kf43=\EOs,
kf44=\EOp,
kf45=\EOn,
kf46=\EOM,
khome=\E[H,
kil1=\E[L,
kich1=\E[@,
kpp=\E[V,
knp=\E[U,
kLFT=\E[ A,
kRIT=\E[ @,
ll=\E[24H,
nel=\EE,
pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s,
rev=\E[7m,
ri=\EM,
rmacs=\E)B^O,
rmir=\E[4l,
rs2=\Ec\E[?3l,
rc=\E8,
rmso=\E[m,
rmln=\E[2p,
rmul=\E[m,
sgr0=\E[m^O,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
smacs=\E)0^N,
smir=\E[4h,
smso=\E[7m,
smul=\E[4m,
smln=\E[p,
sc=\E7,
tsl=\E7\E[25;%i%p1%dx,
tbc=\E[3g,
fln=4\,4,
hts=\EH,
swidm=\E#6,
mc0=\E[i,
mc4=\E[?4i,
mc5=\E[?5i,
605V2-w|605V2bct-w|ATT605V2-w|att605V2-w|AT&T 605V2-w 132 column 102 key keyboard @(#)605V2.ti 1.5,
cols#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
use=605V2,
610|610bct|ATT610|att610|AT&T 610; 80 column; 98key keyboard @(#)610.ti 1.8,
am,
xenl,
hs,
eslok,
mir,
msgr,
xon,
cols#80,
it#8,
lh#2,
lines#24,
lw#8,
nlab#8,
wsl#80,
cbt=\E[Z,
bel=^G,
cr=^M,
csr=\E[%i%p1%d;%p2%dr,
clear=\E[H\E[J,
el=\E[K,
ed=\E[J,
cup=\E[%i%p1%d;%p2%dH,
cud1=\E[B,
home=\E[H,
civis=\E[?25l,
cub1=^H,
cnorm=\E[?25h\E[?12l,
cuf1=\E[C,
ll=\E[24H,
cuu1=\E[A,
cvvis=\E[?12;25h,
dch1=\E[P,
dl1=\E[M,
smacs=^N,
blink=\E[5m,
bold=\E[1m,
dim=\E[2m,
smir=\E[4h,
ich=\E[%p1%d@,
invis=\E[8m,
rev=\E[7m,
smso=\E[7m,
smul=\E[4m,
rmacs=^O,
sgr0=\E[m^O,
rmir=\E[4l,
rmso=\E[m,
rmul=\E[m,
flash=\E[?5h$<200>\E[?5l,
fsl=\E8,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
is2=\E[0m^O,
is3=\E(B\E)0,
il1=\E[L,
kbs=^H,
kclr=\E[2J,
kcud1=\E[B,
kf1=\EOc,
kf2=\EOd,
kf3=\EOe,
kf4=\EOf,
kf5=\EOg,
kf6=\EOh,
kf7=\EOi,
kf8=\EOj,
kf9=\ENo,
kf10=\ENp,
kf11=\ENq,
kf12=\ENr,
kf13=\ENs,
kf14=\ENt,
khome=\E[H,
kcub1=\E[D,
kcuf1=\E[C,
kind=\E[S,
kri=\E[T,
kcuu1=\E[A,
nel=\EE,
dch=\E[%p1%dP,
dl=\E[%p1%dM,
cud=\E[%p1%dB,
il=\E[%p1%dL,
cub=\E[%p1%dD,
cuf=\E[%p1%dC,
cuu=\E[%p1%dA,
pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
mc4=\E[?4i,
mc5=\E[?5i,
rs2=\Ec\E[?3l,
rc=\E8,
sc=\E7,
ind=\ED,
ri=\EM,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
ht=\t,
tsl=\E7\E[25;%i%p1%dx,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s,
kcbt=\E[Z,
smln=\E[p,
rmln=\E[2p,
kLFT=\E[ @,
kRIT=\E[ A,
el1=\E[1K,
610-w|610bct-w|ATT610-w|att610-w|AT&T 610; 132 column; 98key keyboard @(#)610.ti 1.8,
cols#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
wsl#132,
use=610,
610-103k|610bct-103k|ATT610-103k|att610-103k|AT&T 610; 80 column; 103key keyboard @(#)610.ti 1.8,
kf9@,
kf10@,
kf11@,
kf12@,
kf13@,
kf14@,
kdch1=\ENf,
kdl1=\ENe,
kel=\EOa,
kich1=\ENj,
krmir=\ENj,
knp=\E[U,
kpp=\E[V,
kbeg=\E9,
kcan=\EOw,
kclo=\EOV,
kcmd=\EOu,
kcpy=\ENd,
kcrt=\EOn,
kend=\E0,
kext=\EOk,
kfnd=\EOx,
khlp=\EOm,
kmrk=\ENi,
kmsg=\EOl,
kmov=\ENc,
knxt=\ENh,
kopn=\EOv,
kopt=\EOr,
kprt=\EOz,
kprv=\ENg,
krdo=\EOt,
kref=\EOb,
krfr=\ENa,
krpl=\EOy,
krst=\EOB,
kres=\EOq,
ksav=\EOo,
kspd=\EOp,
kund=\EOs,
kBEG=\ENB,
kCAN=\EOW,
kCMD=\EOU,
kCPY=\END,
kCRT=\EON,
kDC=\ENF,
kDL=\ENE,
kslt=\ENI,
kEND=\ENN,
kEOL=\EOA,
kEXT=\EOK,
kFND=\EOX,
kHLP=\EOM,
kMSG=\EOL,
kMOV=\ENC,
kNXT=\ENH,
kOPT=\EOR,
kPRT=\EOZ,
kPRV=\ENG,
kRDO=\EOT,
kRPL=\EOY,
kRES=\EOQ,
kSAV=\EOO,
kSPD=\EOP,
kUND=\EOS,
use=610,
610-103k-w|610bct-103k-w|ATT610-103k-w|att610-103k-w|AT&T 610; 132 column; 103key keyboard @(#)610.ti 1.8,
cols#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
wsl#132,
use=610-103k,
615|615mt|ATT615|att615|AT&T 615; 80 column; 98key keyboard @(#)615.ti 1.4,
# add sequences for changing flow control setting
smxon=\E[?21;29h,
rmxon=\E[?21l,
# modify initialization string font setting to match terminal on power-up
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
# add print screen not in previous versions of 615 MT
mc0=\E[i,
# add shifted HOME key
kHOM=\ENM,
kLFT=\E[ A,
kRIT=\E[ @,
kf15=\EOC,
kf16=\EOD,
kf17=\EOE,
kf18=\EOF,
kf19=\EOG,
kf20=\EOH,
kf21=\EOI,
kf22=\EOJ,
kf23=\ENO,
kf24=\ENP,
kf25=\ENQ,
kf26=\ENR,
kf27=\ENS,
kf28=\ENT,
kf29=\EOP,
kf30=\EOQ,
kf31=\EOR,
kf32=\EOS,
kf33=\EOw,
kf34=\EOx,
kf35=\EOy,
kf36=\EOm,
kf37=\EOt,
kf38=\EOu,
kf39=\EOv,
kf40=\EOl,
kf41=\EOq,
kf42=\EOr,
kf43=\EOs,
kf44=\EOp,
kf45=\EOn,
kf46=\EOM,
use=610,
615-w|615mt-w|ATT615-w|att615-w|AT&T 615; 132 column; 98key keyboard @(#)615.ti 1.4,
# add sequences for changing flow control setting
smxon=\E[?21;29h,
rmxon=\E[?21l,
# modify initialization string font setting to match terminal on power-up
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)B,
# add print screen not in previous versions of 615 MT
mc0=\E[i,
# add shifted HOME key
kHOM=\ENM,
kLFT=\E[ A,
kRIT=\E[ @,
kf15=\EOC,
kf16=\EOD,
kf17=\EOE,
kf18=\EOF,
kf19=\EOG,
kf20=\EOH,
kf21=\EOI,
kf22=\EOJ,
kf23=\ENO,
kf24=\ENP,
kf25=\ENQ,
kf26=\ENR,
kf27=\ENS,
kf28=\ENT,
kf29=\EOP,
kf30=\EOQ,
kf31=\EOR,
kf32=\EOS,
kf33=\EOw,
kf34=\EOx,
kf35=\EOy,
kf36=\EOm,
kf37=\EOt,
kf38=\EOu,
kf39=\EOv,
kf40=\EOl,
kf41=\EOq,
kf42=\EOr,
kf43=\EOs,
kf44=\EOp,
kf45=\EOn,
kf46=\EOM,
use=610-w,
615-103k|615mt-103k|ATT615-103k|att615-103k|AT&T 615; 80 column; 103key keyboard @(#)615.ti 1.4,
# add sequences for changing flow control setting
smxon=\E[?21;29h,
rmxon=\E[?21l,
# modify initialization string font setting to match terminal on power-up
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
# add print screen not in previous versions of 615 MT
mc0=\E[i,
# remove shifted HOME key added for 615 with 98-key keyboard
kHOM@,
kLFT=\E[ A,
kRIT=\E[ @,
use=610-103k,
615-103k-w|615mt-103k-w|ATT615-103k-w|att615-103k-w|AT&T 615; 132 column; 103key keyboard @(#)615.ti 1.4,
# add sequences for changing flow control setting
smxon=\E[?21;29h,
rmxon=\E[?21l,
# modify initialization string font setting to match terminal on power-up
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)B,
# add print screen not in previous versions of 615 MT
mc0=\E[i,
# remove shifted HOME key added for 615 with 98-key keyboard
kHOM@,
kLFT=\E[ A,
kRIT=\E[ @,
use=610-103k-w,
#
# AT&T 615CMT - Color Multitasking Terminal - default is 102 keyboard
#
615CMT-102k|615cmt-102k|A615CMT-102k|a615CMT-102k|AT&T 615 CMT color multitasking terminal; 80 column; 102 key keyboard @(#)615CMT.ti 1.5,
colors#8,pairs#64,
# all attributes supported except protect
# with bold mapped to cyan, dim to blue, and standout as for the 615 MT
#
# color terminfo escape sequence parameters
# parameters foreground background
#
# black 0 30 40
# blue 1 34 44
# green 2 32 42
# cyan 3 36 46
# red 4 31 41
# magenta 5 35 45
# yellow 6 33 43
# white 7 37 47
# default - 39 49
#
# initial color always white foreground on black background
op=\E[37;40m,
sgr0=\E[m^O,
# set for foreground and background color variable
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%{7}%>%t9%e%p1%d%;m,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%{7}%>%t9%e%p1%d%;m,
#
# attribute terminfo parameter escape sequence parameter
# none 0 0
# standout 1 7 (reverse)
# underline 2 4
# reverse 3 7
# blink 4 5
# dim 5 34 (blue)
# bold 6 36 (cyan)
# invisible 7 8
# protect 8 not supported
# altcharset 9 no sequence - SO for on, SI for off
#
# modify sgr from 615 MT for dim and bold
sgr=\E[0%?%p6%t;36%;%?%p5%t;34%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
bold=\E[36m,
dim=\E[34m,
# add keys for 102 key keyboard not on 98 key keyboard
kdch1=\E[P,
kdl1=\E[M,
kend=\E[24;1H,
kich1=\E[@,
kil1=\E[L,
knp=\E[U,
kpp=\E[V,
# remove key for 98 key keyboard not on 102 key keyboard
kHOM@,
# add sequences for changing flow control setting
smxon=\E[?21;29h,
rmxon=\E[?21l,
# modify initialization string font setting
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
# add some enhancements not in previous versions for 615 MT
mc0=\E[i,
# all other controls are the same as the 615 MT
use=att615,
#
# AT&T 615CMT - Color Multitasking Terminal - default is 98 keyboard
#
615CMT-98k|615cmt-98k|A615CMT-98k|a615CMT-98k|AT&T 615 CMT color multitasking terminal; 80 column; 98 key keyboard @(#)615CMT.ti 1.5,
kHOM=\ENM,
kdch1@,
kdl1@,
kend@,
kich1@,
kil1@,
knp@,
kpp@,
use=615CMT-102k,
#
# AT&T 615CMT - Color Multitasking Terminal - default is 102 keyboard
# and wide columns
#
615CMT-102k-w|615cmt-102k-w|A615CMT-102k-w|a615CMT-102k-w|AT&T 615 CMT color multitasking terminal; 132 column; 102 key keyboard @(#)615CMT.ti 1.5,
cols#132,
wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)B,
use=615CMT-102k,
#
# AT&T 615CMT - Color Multitasking Terminal - default is 98 keyboard
# and wide columns
#
615CMT-98k-w|615cmt-98k-w|A615CMT-98k-w|a615CMT-98k-w|AT&T 615 CMT color multitasking terminal; 132 column; 98 key keyboard @(#)615CMT.ti 1.5,
cols#132,
wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)B,
kHOM=\ENM,
kdch1@,
kdl1@,
kend@,
kich1@,
kil1@,
knp@,
kpp@,
use=615CMT-102k,
620|620mtg|ATT620|att620|AT&T 620; 80 column; 98key keyboard @(#)620.ti 1.8,
am,
xenl,
hs,
eslok,
mir,
msgr,
xon,
cols#80,
it#8,
lh#2,
lines#24,
lw#8,
nlab#8,
wsl#80,
cbt=\E[Z,
bel=^G,
cr=^M,
csr=\E[%i%p1%d;%p2%dr,
clear=\E[H\E[J,
el=\E[K,
ed=\E[J,
cup=\E[%i%p1%d;%p2%dH,
cud1=\E[B,
home=\E[H,
civis=\E[?25l,
cub1=^H,
cnorm=\E[?25h\E[?12l,
cuf1=\E[C,
ll=\E[24H,
cuu1=\E[A,
cvvis=\E[?12;25h,
dch1=\E[P,
dl1=\E[M,
smacs=^N,
blink=\E[5m,
bold=\E[1m,
smir=\E[4h,
ich=\E[%p1%d@,
invis=\E[8m,
rev=\E[7m,
smso=\E[7m,
smul=\E[4m,
rmacs=^O,
sgr0=\E[m^O,
rmir=\E[4l,
rmso=\E[m,
rmul=\E[m,
flash=\E[?5h$<200>\E[?5l,
fsl=\E8,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
is2=\E[0m^O,
is3=\E(B\E)0,
il1=\E[L,
kbs=^H,
kclr=\E[2J,
kcud1=\E[B,
kf1=\EOc,
kf2=\EOd,
kf3=\EOe,
kf4=\EOf,
kf5=\EOg,
kf6=\EOh,
kf7=\EOi,
kf8=\EOj,
kf9=\ENo,
kf10=\ENp,
kf11=\ENq,
kf12=\ENr,
kf13=\ENs,
kf14=\ENt,
kf15=\EOC,
kf16=\EOD,
kf17=\EOE,
kf18=\EOF,
kf19=\EOG,
kf20=\EOH,
kf21=\EOI,
kf22=\EOJ,
kf23=\ENO,
kf24=\ENP,
kf25=\ENQ,
kf26=\ENR,
kf27=\ENS,
kf28=\ENT,
kf29=\EOP,
kf30=\EOQ,
kf31=\EOR,
kf32=\EOS,
kf33=\EOw,
kf34=\EOx,
kf35=\EOy,
kf36=\EOm,
kf37=\EOt,
kf38=\EOu,
kf39=\EOv,
kf40=\EOl,
kf41=\EOq,
kf42=\EOr,
kf43=\EOs,
kf44=\EOp,
kf45=\EOn,
kf46=\EOM,
khome=\E[H,
kcub1=\E[D,
kcuf1=\E[C,
kind=\E[S,
kri=\E[T,
kcuu1=\E[A,
nel=\EE,
dch=\E[%p1%dP,
dl=\E[%p1%dM,
cud=\E[%p1%dB,
il=\E[%p1%dL,
cub=\E[%p1%dD,
cuf=\E[%p1%dC,
cuu=\E[%p1%dA,
pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
mc4=\E[?4i,
mc5=\E[?5i,
rs2=\Ec\E[?3l,
rc=\E8,
sc=\E7,
ind=\ED,
ri=\EM,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
ht=\t,
tsl=\E7\E[25;%i%p1%dx,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s,
kcbt=\E[Z,
smln=\E[p,
rmln=\E[2p,
kLFT=\E[ A,
kRIT=\E[ @,
el1=\E[1K,
620-w|620mtg-w|ATT620-w|att620-w|AT&T 620; 132 column; 98key keyboard @(#)620.ti 1.8,
cols#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
wsl#132,
use=620,
620-103k|620mtg-103k|ATT620-103k|att620-103k|AT&T 620; 80 column; 103key keyboard @(#)620.ti 1.8,
kf9@,
kf10@,
kf11@,
kf12@,
kf13@,
kf14@,
kf15@,
kf16@,
kf17@,
kf18@,
kf19@,
kf20@,
kf21@,
kf22@,
kf23@,
kf24@,
kf25@,
kf26@,
kf27@,
kf28@,
kf29@,
kf30@,
kf31@,
kf32@,
kf33@,
kf34@,
kf35@,
kf36@,
kf37@,
kf38@,
kf39@,
kf40@,
kf41@,
kf42@,
kf43@,
kf44@,
kf45@,
kf46@,
kdch1=\ENf,
kdl1=\ENe,
kel=\EOa,
kich1=\ENj,
krmir=\ENj,
knp=\E[U,
kpp=\E[V,
kbeg=\E9,
kcan=\EOw,
kclo=\EOV,
kcmd=\EOu,
kcpy=\ENd,
kcrt=\EOn,
kend=\E0,
kext=\EOk,
kfnd=\EOx,
khlp=\EOm,
kmrk=\ENi,
kmsg=\EOl,
kmov=\ENc,
knxt=\ENh,
kopn=\EOv,
kopt=\EOr,
kprt=\EOz,
kprv=\ENg,
krdo=\EOt,
kref=\EOb,
krfr=\ENa,
krpl=\EOy,
krst=\EOB,
kres=\EOq,
ksav=\EOo,
kspd=\EOp,
kund=\EOs,
kBEG=\ENB,
kCAN=\EOW,
kCMD=\EOU,
kCPY=\END,
kCRT=\EON,
kDC=\ENF,
kDL=\ENE,
kslt=\ENI,
kEND=\ENN,
kEOL=\EOA,
kEXT=\EOK,
kFND=\EOX,
kHLP=\EOM,
kMSG=\EOL,
kMOV=\ENC,
kNXT=\ENH,
kOPT=\EOR,
kPRT=\EOZ,
kPRV=\ENG,
kRDO=\EOT,
kRPL=\EOY,
kRES=\EOQ,
kSAV=\EOO,
kSPD=\EOP,
kUND=\EOS,
use=620,
620-103k-w|620mtg-103k-w|ATT620-103k-w|att620-103k-w|AT&T 620; 132 column; 103key keyboard @(#)620.ti 1.8,
cols#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
wsl#132,
use=620-103k,
##############################################################
#
# 630 terminfo
#
#
630|att630|5630|5630DMD|630MTG|AT&T 630 windowing terminal @(#)630.ti 1.5,
am, da, db, mir, msgr, npc, xon,
cols#80, it#8, lines#60, lm#0,
#
# short descriptions without \E
#
bel=^G, cr=\r, ht=\t, nel=\r\n,
#
# cursor movement
#
cuu1=\E[A, cud1=\E[B, cuf1=\E[C, cub1=\b,
cuu=\E[%p1%dA, cud=\E[%p1%dB, cuf=\E[%p1%dC, cub=\E[%p1%dD,
cup=\E[%i%p1%d;%p2%dH,
home=\E[H,
cbt=\E[Z,
#
# scrolling
#
ind=\ED, ri=\EM,
indn=\E[%p1%dS, rin=\E[%p1%dT,
#
# character attributes
#
smul=\E[4m, rmul=\E[m,
smso=\E[7m, rmso=\E[m,
rev=\E[7m,
sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
sgr0=\E[m,
#
# clear
#
el=\E[K, el1=\E[1K, ed=\E[J, clear=\E[H\E[J,
#
# insert/delete
#
dch1=\E[P, dl1=\E[M, il1=\E[L,
dch=\E[%p1%dP, dl=\E[%p1%dM, il=\E[%p1%dL, ich=\E[%p1%d@,
smir=\E[4h, rmir=\E[4l,
#
# pf string
#
pfx=\E[%p1%d;%p2%l%dq%p2%s,
#
# set/reset
#
sc=\E7, rc=\E8,
is2=\E[m, rs2=\Ec,
#
# printer
#
mc4=\E[?4i, mc5=\E[?5i,
#
# keyboard definitions
#
kbs=\b, kclr=\E[2J, khome=\E[H, kcbt=\E[Z,
kcuu1=\E[A, kcud1=\E[B, kcuf1=\E[C, kcub1=\E[D,
kf9=\ENo, kf10=\ENp, kf11=\ENq,
kf12=\ENr, kf13=\ENs, kf14=\ENt,
#
# the following keys are used only by the 122 key keyboard
#
kdch1=\E[P, kdl1=\E[M,
kich1=\E[@, kil1=\E[L,
kf15=\ENu, kf16=\ENv, kf17=\ENw,
kf18=\ENx, kf19=\ENy, kf20=\ENz,
kf21=\EN{, kf22=\EN|, kf23=\EN},
kf24=\EN~,
630-24|att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines @(#)630.ti 1.5,
lines#24, use=630,
6300+|PC6300PLUS|pc6300plus|6300plus|6300PLUS|AT&T-IS PC 6300 PLUS Personal Computer @(#)6300+.ti 1.1,
am,
cols#80, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
cr=\r, cub1=\b, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, dch1=\E[1P,
dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, home=\E[H,
hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n, invis=\E[9m,
kbs=\b, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
kf9=\EOk, nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
smso=\E[7m, smul=\E[4m, tbc=\E[3g,
730|att730|730MTG|AT&T 730 windowing terminal Version @(#)730.ti 1.3,
# has status line of 80 chars
hs,
wsl#80,
tsl=\E7\E[;%i%p1%dx,
# support \E on the status line (status_line_esc_ok)
eslok,
# screen dimension
cols#80,
lines#60,
# label information
lw#8,
lh#2,
nlab#24,
rmln=\E[?13h,
smln=\E[?13l,
# mapping of alternate character set to ASCII
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# change the scrolling region
csr=\E[%i%p1%d;%p2%dr,
# cursor visibility control
civis=\E[?25l,
cnorm=\E[?25h\E[?12l,
cvvis=\E[?12;25h,
# character set mode
smacs=^N,
rmacs=^O,
am,
da,
db,
xenl,
mir,
msgr,
npc,
xon,
it#8,
lm#0,
# short descriptions without \E
bel=^G,
cr=^M,
ht=\t,
# cursor movement
cud1=\E[B,
cuf1=\E[C,
cuu1=\E[A,
cub1=^H,
cud=\E[%p1%dB,
cuu=\E[%p1%dA,
cuf=\E[%p1%dC,
cub=\E[%p1%dD,
cup=\E[%i%p1%d;%p2%dH,
home=\E[H,
cbt=\E[Z,
# scrolling
ind=\ED,
ri=\EM,
# indn=\E[%p1%dS,
# rin=\E[%p1%dT,
# character attributes
smul=\E[4m,
rmul=\E[24m,
smso=\E[7m,
rmso=\E[27m,
rev=\E[7m,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
sgr0=\E[m^O,
# character attribute mode
blink=\E[5m,
bold=\E[1m,
dim=\E[2m,
invis=\E[8m,
# line attribute
swidm=\E#6,
# clear
el=\E[K,
el1=\E[1K,
ed=\E[J,
clear=\E[H\E[J,
# insert/delete
dch1=\E[P,
dl1=\E[M,
il1=\E[L,
dch=\E[%p1%dP,
dl=\E[%p1%dM,
il=\E[%p1%dL,
ich=\E[%p1%d@,
smir=\E[4h,
rmir=\E[4l,
# pf string
# the escape sequences are different to program
# system function keys 1-24
# shifted system function keys (numbers 25-48, but no label)
# <25: ESC [ pf# ; string-length q 16-char-label up-to-8-char-str
# >24: ESC [ pf#-24 ; string-length ; 0 ; 3 q up-to-8-char-str
pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
# set/reset
sc=\E7,
rc=\E8,
is2=\E[0m^O,
rs2=\Ec\E[?3l,
# printer
mc0=\E[?19h\E[0i,
mc4=\E[?4i,
mc5=\E[?5i,
# keyboard definition
kich1=\E[@,
kil1=\E[L,
kbs=^H,
kclr=\E[2J,
khome=\E[H,
kcbt=\E[Z,
kcuu1=\E[A,
kcud1=\E[B,
kcuf1=\E[C,
kcub1=\E[D,
kf1=\EOc,
kf2=\EOd,
kf3=\EOe,
kf4=\EOf,
kf5=\EOg,
kf6=\EOh,
kf7=\EOi,
kf8=\EOj,
kf9=\ENo,
kf10=\ENp,
kf11=\ENq,
kf12=\ENr,
kf13=\ENs,
kf14=\ENt,
kf15=\ENu,
kf16=\ENv,
kf17=\ENw,
kf18=\ENx,
kf19=\ENy,
kf20=\ENz,
kf21=\EN{,
kf22=\EN|,
kf23=\EN},
kf24=\EN~,
# the following keys are used for shifted system Fkeys
kf25=\EOC,
kf26=\EOD,
kf27=\EOE,
kf28=\EOF,
kf29=\EOG,
kf30=\EOH,
kf31=\EOI,
kf32=\EOJ,
kf33=\ENO,
kf34=\ENP,
kf35=\ENQ,
kf36=\ENR,
kf37=\ENS,
kf38=\ENT,
kf39=\EOU,
kf40=\EOV,
kf41=\EOW,
kf42=\EOX,
kf43=\EOY,
kf44=\EOZ,
kf45=\EO[,
kf46=\EO\s,
kf47=\EO],
kf48=\EO\^,
flash=\E[?5h$<200>\E[?5l,
fsl=\E8,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
is3=\E(B\E)0,
kind=\E[S,
kri=\E[T,
nel=\EE,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s,
kLFT=\E[\s@,
kRIT=\E[\sA,
# add sequences for changing flow control setting
smxon=\E[?21h,
rmxon=\E[?21l,
# add shifted HOME key
kHOM=\E[2J,
# repeat char
rep=%p1%c\E[%p2%1%-$db,
730-41|att730-41|730MTG-41|AT&T 730-41 windowing terminal Version @(#)730.ti 1.3,
lines#41,
use=730,
730-24|att730-24|730MTG-24|AT&T 730-24 windowing terminal Version @(#)730.ti 1.3,
lines#24,
use=730,
730r|att730r|730MTGr|AT&T 730 rev video windowing terminal Version @(#)730.ti 1.3,
flash=\E[?5l$<200>\E[?5h,
is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
use=730,
730r-41|att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version @(#)730.ti 1.3,
lines#41,
use=730r,
730r-24|att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version @(#)730.ti 1.3,
lines#24,
use=730r,
#
# Info:
# TERMINFO entry for the AT&T Unix PC 7300
# from escape(7) in Unix PC 7300 Manual.
# Somewhat similar to a vt100-am (but different enough
# to redo this from scratch.)
# Info:
# /***************************************************************
# *
# * FONT LOADING PROGRAM FOR THE UNIX PC
# *
# * This routine loads a font defined in the file ALTFONT
# * into font memory slot #1. Once the font has been loaded,
# * it can be used as an alternative character set.
# *
# * The call to ioctl with the argument WIOCLFONT is the key
# * to this routine. For more information, see window(7) in
# * the PC 7300 documentation.
# ***************************************************************/
# #include <string.h> /* needed for strcpy call */
# #include <sys/window.h> /* needed for ioctl call */
# #define FNSIZE 60 /* font name size */
# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
# /*
# * The file /usr/lib/wfont/special.8.ft comes with the
# * standard PC software. It defines a graphics character set
# * similar to that of the Teletype 5425 terminal. To view
# * this or other fonts in /usr/lib/wfont, use the command
# * cfont <filename>. For further information on fonts see
# * cfont(1) in the PC 7300 documentation.
# */
#
# struct altfdata /* structure for alt font data */
# {
# short altf_slot; /* memory slot number */
# char altf_name[FNSIZE]; /* font name (file name) */
# };
# ldfont()
# {
# int wd; /* window in which altfont will be */
# struct altfdata altf;
# altf.altf_slot=1;
# strcpy(altf.altf_name,ALTFONT);
# for (wd =1; wd < 12; wd++) {
# ioctl(wd, WIOCLFONT,&altf);
# }
# }
#
7300|unixpc|pc7300|PC7300|unix_pc|AT&T UNIX PC Model 7300 @(#)7300.ti 1.5,
am, xon,
cols#80, lines#24,
bel=^G, bold=\E[7m, clear=\E[2J\E[H, cr=\r,
cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, il=\E[%p1%dL,
il1=\E[L, ind=\n, kBEG=\ENB, kCAN=\EOW, kCMD=\EOU,
kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, kEND=\ENN,
kEOL=\EOA, kEXT=\EOK, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS,
kbeg=\E9, kbs=\b, kcan=\EOw, kclo=\EOV, kclr=\E[J,
kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
kdl1=\ENe, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc,
kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh,
kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, khome=\E[H,
kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, nel=\EE,
rev=\E[7m, ri=\EM, rmacs=\E[10m, rmso=\E[0m,
rmul=\E[0m, sgr0=\E[0;10m, smacs=\E[11m, smso=\E[7m,
smul=\E[4m,
SYS75|sys75|AT&T System 75 Cartridge; 80 column; 98key keyboard @(#)SYS75.ti 1.2,
am,
xenl,
hs,
eslok,
mir,
msgr,
xon,
cols#80,
it#8,
lh#2,
lines#24,
lw#8,
nlab#8,
wsl#80,
cbt=\E[Z,
bel=^G,
cr=^M,
csr=\E[%i%p1%d;%p2%dr,
clear=\E[H\E[J,
el=\E[K,
ed=\E[J,
cup=\E[%i%p1%d;%p2%dH,
cud1=\E[B,
home=\E[H,
civis=\E[?25l,
cub1=^H,
cnorm=\E[?25h\E[?12l,
cuf1=\E[C,
ll=\E[24H,
cuu1=\E[A,
cvvis=\E[?12;25h,
dch1=\E[P,
dl1=\E[M,
smacs=^N,
blink=\E[5m,
bold=\E[1m,
dim=\E[2m,
smir=\E[4h,
ich=\E[%p1%d@,
invis=\E[8m,
rev=\E[7m,
smso=\E[7m,
smul=\E[4m,
rmacs=^O,
sgr0=\E[m^O,
rmir=\E[4l,
rmso=\E[m,
rmul=\E[m,
flash=\E[?5h$<200>\E[?5l,
fsl=\E8,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
is2=\E[0m^O,
is3=\E(B\E)0,
il1=\E[L,
kbs=^H,
kcud1=\E[B,
kf1=\EOc,
kf2=\EOd,
kf3=\EOe,
kf4=\EOf,
kf5=\EOg,
kf6=\EOh,
kf7=\EOi,
kf8=\EOj,
kf9=\ENo,
kf10=\ENp,
kf11=\ENq,
kf12=\ENr,
kf13=\ENs,
kf14=\ENt,
khome=\E[H,
kcub1=\E[D,
kcuf1=\E[C,
kind=\E[S,
kri=\E[T,
kcuu1=\E[A,
nel=\EE,
dch=\E[%p1%dP,
dl=\E[%p1%dM,
cud=\E[%p1%dB,
il=\E[%p1%dL,
cub=\E[%p1%dD,
cuf=\E[%p1%dC,
cuu=\E[%p1%dA,
rs2=\Ec\E[?3l,
rc=\E8,
sc=\E7,
ind=\ED,
ri=\EM,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
ht=\t,
tsl=\E7\E[25;%i%p1%dx,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
pln=\E[%p1%d;0;0;0p%p2%:-16.16s,
kcbt=\E[Z,
smln=\E?,
rmln=\E<,
el1=\E[1K,
kclr=\E[J,
pfxl=\E[%p1%d;%p2%l%02dp%?%p1%{9}%<%t F%p1%1d %;%p2%s,
mc0=\E[?0i,
mc4=\E[?8i,
mc5=\E[?4i,
kLFT=\ENK,
kRIT=\ENL,
kHOM=\ENM,
hpa=\E[%p1%dG,
SYS75-w|sys75-w|AT&T System 75 Cartridge; 132 column; 98key keyboard @(#)SYS75.ti 1.2,
cols#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
wsl#132,
use=SYS75,
SYS75-103k|sys75-103k|AT&T System 75 Cartridge; 80 column; 103key keyboard @(#)SYS75.ti 1.2,
kf9@,
kf10@,
kf11@,
kf12@,
kf13@,
kf14@,
kdch1=\ENf,
kdl1=\ENe,
kel=\EOa,
kich1=\ENj,
krmir=\ENj,
knp=\E[U,
kpp=\E[V,
kbeg=\E9,
kcan=\EOw,
kclo=\EOV,
kcmd=\EOu,
kcpy=\ENd,
kcrt=\EOn,
kend=\E0,
kext=\EOk,
kfnd=\EOx,
khlp=\EOm,
kmrk=\ENi,
kmsg=\EOl,
kmov=\ENc,
knxt=\ENh,
kopn=\EOv,
kopt=\EOr,
kprt=\EOz,
kprv=\ENg,
krdo=\EOt,
kref=\EOb,
krfr=\ENa,
krpl=\EOy,
krst=\EOB,
kres=\EOq,
ksav=\EOo,
kspd=\EOp,
kund=\EOs,
kBEG=\ENB,
kCAN=\EOW,
kCMD=\EOU,
kCPY=\END,
kCRT=\EON,
kDC=\ENF,
kDL=\ENE,
kslt=\ENI,
kEND=\ENN,
kEOL=\EOA,
kEXT=\EOK,
kFND=\EOX,
kHLP=\EOM,
kMSG=\EOL,
kMOV=\ENC,
kNXT=\ENH,
kOPT=\EOR,
kPRT=\EOZ,
kPRV=\ENG,
kRDO=\EOT,
kRPL=\EOY,
kRES=\EOQ,
kSAV=\EOO,
kSPD=\EOP,
kUND=\EOS,
use=SYS75,
SYS75-103k-w|sys75-103k-w|AT&T System 75 Cartridge; 132 column; 103key keyboard @(#)SYS75.ti 1.2,
cols#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
wsl#132,
use=SYS75-103k,
blit|jerq|blit running teletype rom @(#)blit.ti 1.1,
xon,cr=^M, ind=^J, bel=^G, am, ht=^I, it#8, ul, eo,
cud1=^J, cuf1=\EC, cuu1=\EA, cub1=\ED,
cols#87, lines#72, clear=^L, el=\EK,
cup=\EY%p2%' '%+%c%p1%' '%+%c,
il1=\EF!, dl1=\EE!, ich1=\Ef!, dch1=\Ee!,
il=\EF%p1%' '%+%c, dl=\EE%p1%' '%+%c,
ich=\Ef%p1%' '%+%c, dch=\Ee%p1%' '%+%c,
kcuu1=\EA, kcud1=\EB, kcuf1=\EC, kcub1=\ED, kbs=^H,
kf1=\Ex, kf2=\Ey, kf3=\Ez,
cbblit|fixterm|blit running columbus code @(#)blit.ti 1.1,
smso=\EU!, rmso=\EV!, smul=\EU", rmul=\EV",
flash=\E^G, ed=\EJ, smir=\EQ, rmir=\ER, ich1@, cols#88,
mc5=^R, mc4=^T, mc5p=\EP%p1%03d, use=blit,
oblit|ojerq|first version of blit rom @(#)blit.ti 1.1,
xon,cr=^M, cud1=^J, ind=^J, bel=^G, cols#88, lines#72, it#8, ht=^I,
am, ul, eo, mir, il=\Ef%p1%' '%+%c, dl=\Ee%p1%' '%+%c,
dl1=\EE, rmir=\ER, smir=\EQ, dch1=\EO, cub1=\ED, da, db,
il1=\EF, ed=\EJ, el=\EK, clear=^L, cup=\EY%p2%' '%+%c%p1%' '%+%c,
cuf1=\EC, cuu1=\EA, flash=\E^G, kbs=^H,
# Info:
# This is an old version of vitty reentered. It is used when
# running the vitty program outside a blit layer.
#
blitlayer|vitty| @(#)blit.ti 1.1,
cr=^M, cud1=^J, ind=^J, bel=^G, cols#87, lines#72, it#8, ht=^I,
am, clear=^L, cup=\EY%p2%' '%+%c%p1%' '%+%c, el=\EK, il1=\EI, dl1=\ED,
flash=\E^G, cuu1=^K,
# Info:
#
# This is a generic terminal for the new AT&T terminals that is not
# really for use by itself, but was created to help make the
# support for the other new terminals easier by defining the
# common entry fields only once. There are several things
# that weren't defined here but were common to 2 or more terminal
# entries because they were different in at least 2 of the other
# entries (e.g. clear, cols, cud1, ht, ind, and lines).
# Unfortunately the 4424 has almost completely different data
# for the fields than what the newer ones have and so hasn't been
# included as one of the terminals using this common entry.
#
attgeneric| AT&T generic terminal description @(#)generic.ti 1.2,
am, hs, mir, msgr, xenl, xon,
cols#80, it#8, lh#2, lines#24, lw#8, nlab#8,
wsl#55,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[4;7m, cbt=\E[Z,
clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD,
ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
ht=\t, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
invis=\E[8m, is1=\E<\E[?3l$<100>,
is2=\E[0m^O\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
is3=\E[?5l, kbeg=\Et, kbs=\b, kcbt=\E[Z, kclr=\E[2J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[P, kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\n,
kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, kich1=\E[4h,
kil1=\E[L, kind=\E[T, kprt=\EOe, kri=\E[S, ll=\E[24H,
mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, nel=\r\n,
pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%1d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O,
rmir=\E[4l, rmkx=\E[21;0j, rmln=\E|, rmso=\E[m,
rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
sgr0=\E[m^O, smacs=^N, smir=\E[4h, smkx=\E[21;1j\E~,
smln=\E~, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
tsl=\E7\E[25;%p1%{8}%+%dH,
netty| @(#)netty.ti 1.2,
smcup=\EC@\EI@\EU@\ER@\EW@\EP@\E{A\E[@\E#A\EXA, rmcup=\E{@\E#@\EX@,
use=netty-Tabs,
netty-vi| @(#)netty.ti 1.2,
smcup=\EC@\EI@\EU@\ER@\EW@\EP@\E{A\E[A\E#B\EX@, rmcup=\E{@\E[@\E#@,
use=netty-Tabs,
netty-Tabs| @(#)netty.ti 1.2,
am,
hs,
mir,
msgr,
it#8,
acsc=jjkkllmmqqxx,
bel=^G,
cr=^M,
clear=^L,
el=\EZ,
cup=\EY%p2%?%p2%{95}%>%t^A%{96}%-%;%' '%+%c%p1%?%p1%{95}%>%t^A%{96}%-%;%' '%+%c,
home=\EY\s\s,
cub1=^H,
cud1=^J,
cuu1=\EA,
dch1=\Ed,
dl1=\ED!,
fsl=^A,
smacs=\ECA, rmacs=\EC@,
smcup=\EC@\EI@\EU@\ER@\EW@\EP@\E{A\E[@\EX@\E#C\EM@!!, rmcup=\E{@\E#@,
smcup=\E{A, rmcup=\E{@,
smir=\EIA, rmir=\EI@,
smul=\EUA, rmul=\EU@,
smso=\ERA, rmso=\ER@,
sgr0=\EC@\EI@\EU@\ER@,
il1=\EO!,
is3=\EF@^A^XOE^A\EFA^A^XOF^A\EFB^A^XOG^A\EFC^A^XOH^A\EFD^A^XOI^A\EFE^A^XOJ^A\EFF^A^XOK^A\EFG^A^XOL^A\EFH^A^XOM^A\EFI^A^XON^A\EFK^A^XOO^A,
kcud1=^XOB,
kf1=^XOE,
kf2=^XOF,
kf3=^XOG,
kf4=^XOH,
kf5=^XOI,
kf6=^XOJ,
kf7=^XOK,
kf8=^XOL,
kclr=^XOM,
khome=^XON,
kll=^XOO,
kcub1=^XOC,
kcuf1=^XOD,
kcuu1=^XOA,
dl=\ED%p1%' '%+%c,
indn=\ES%p1%' '%+%c,
ind=\n,
il=\EO%p1%' '%+%c,
ht=\t,
cols#80,
lines#24,
# Info:
# wind=\Ev%p1%' '%+%c%p3%' '%+%c%p2%' '%+%c%p4%' '%+%c, loses bad
# rev=^N, standout seems to work better
#
tsl=\Eb^A,
#
# The following Terminfo entry describes functions which are supported by
# the AT&T 5430/pt505 terminal software version 2 and later.
#
# The following represents the screen layout along with the associated
# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
# not appear on the screen but are shown to reference the bezel buttons.
# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
# position relative to the screen.
#
#
#
# +----------------------------------------------------------------+
# | |
# XXXX | kf0 kf24 | XXXX
# | |
# | |
# XXXX | kf1 kf23 | XXXX
# | |
# | |
# XXXX | kf2 kf22 | XXXX
# | |
# | |
# XXXX | kf3 kf21 | XXXX
# | |
# | |
# XXXX | kf4 kf20 | XXXX
# | |
# | |
# XXXX | kf5 kf19 | XXXX
# | |
# | |
# XXXX | kf6 kf18 | XXXX
# | |
# | |
# XXXX | | XXXX
# | |
# | |
# +----------------------------------------------------------------+
#
# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
#
# Note: XXXX represents the screen buttons
# CMD REDRAW
#
# MAIL
#
# Depression of the "CMD" key sends \E! (kcmd)
# Depression of the "MAIL" key sends \E[26s (kf26)
# "REDRAW" same as "REFRESH" (krfr)
#
#
# "kf" functions adds carriage return to output string if terminal is in
# 'new line' mode.
#
# The following are functions not covered in the table above:
#
# Set keyboard character (SKC):
#
# \EPn1;Pn2w
#
# Pn1= 0 Back Space key
# Pn1= 1 Break key
# Pn2= Program char (hex)
#
# Screen Definition (SDF):
#
# \E[Pn1;Pn2;Pn3;Pn4;Pn5t
#
# Pn1= Window number (1-39)
# Pn2-Pn5= Y;X;Y;X coordinates
#
# Screen Selection (SSL):
#
# \E[Pnu
#
# Pn= Window number
#
# Set Terminal Modes (SM):
#
# \E[Pnh
#
# Pn= 3 Graphics mode
# Pn= > Cursor blink
# Pn= < Enter new line mode
# Pn= = Enter reverse insert/replace mode
# Pn= ? Enter no scroll mode
#
# Reset Terminal Mode (RM):
#
# \E[Pnl
#
# Pn= 3 Exit graphics mode
# Pn= > Exit cursor blink
# Pn= < Exit new line mode
# Pn= = Exit reverse insert/replace mode
# Pn= ? Exit no scroll mode
#
# Screen Status Report (SSR):
#
# \E[Pnp
#
# Pn= 0 Request current window number
# Pn= 1 Request current window dimensions
#
# Device Status Report (DSR):
#
# \E[6n Request cursor position
#
# Call Status Report (CSR):
#
# \E[Pnv
#
# Pn= 0 Call failed
# Pn= 1 Call successful
#
# Transparent Button String (TBS):
#
# \E[Pn1;Pn2;Pn3;{string
#
# Pn1= Button number to be loaded
# Pn2= Character count of "string"
# Pn3= Key mode being loaded:
# 0= Unshifted
# 1= Shifted
# 2= Control
# String= Text string (15 chars max)
#
# Screen Number Report (SNR):
#
# \E[Pnp
#
# Pn= Screen number
#
# Screen Dimension Report (SDR):
#
# \E[Pn1;Pn2r
#
# Pn1= Number of rows available in window
# Pn2= Number of columns available in window
#
# Cursor Position Report (CPR):
#
# \E[Pn1;Pn2R
#
# Pn1= "Y" Position of cousor
# Pn2= "X" Position of cursor
#
# Request Answer Back (RAB):
#
# \E[c
#
# Answer Back Response (ABR):
#
# \E[?;*;30;VSV
#
# *= 0 No printer available
# *= 2 Printer available
# V= Software version number
# SV= Software sub version number
#
# Screen Alingment Aid:
#
# \En
#
# Bell (lower pitch):
#
# \E[x
#
# Dial Phone Number:
#
# \EPdstring\
#
# string= Phone number to be dialed
#
# Set Phone Labels:
#
# \EPpstring\
#
# string= Label for phone buttons
#
# Set Clock:
#
# \EPchour;minute;second\
#
# Position Clock:
#
# \EPsY;X\
#
# Y= "Y" coordinate
# X= "X" coordinate
#
# Delete Clock:
#
# \Epr\
#
# Programming The Function Buttons:
#
# \EPfPn;string\
#
# Pn= Button number (00-06, 18-24)
# (kf00-kf06, kf18-kf24)
#
# string= Text to sent on button depression
#
# Request For Local Directory Data:
#
# \EPp12;\
#
# Local Directory Data to host:
#
# \EPp11;LOCAL...DIRECTORY...DATA\
#
# Request for Local Directory Data in print format:
#
# \EPp13;\
#
# Enable 'Prt on Line' mode:
#
# \022 (DC2)
#
# Disable 'Prt on Line' mode:
#
# \024 (DC4)
#
#
#
# 05-Aug-86
#
#
505|pt505|5430|gs5430| AT&T Personal Terminal 505 or 5430 GETSET terminal @(#)pt505.ti 1.4,
am, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cnorm=\E[>l,
cols#80, cr=\r, cub1=\E[D, cub=\E[%p1%dD, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
el=\E[0K, el1=\E2K, home=\E[H, ht=\t, il=\E[%p1%dL, il1=\E[L, ind=\n,
is1=\EPr\\E[0u\E[2J\E[0;0H\E[0m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
it#8, kbs=\b, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf0=\E[00s, kf1=\E[01s, kf2=\E[02s, kf3=\E[03s, kf4=\E[04s, kf5=\E[05s,
kf6=\E[06s, kf18=\E[18s, kf19=\E[19s, kf20=\E[20s, kf21=\E[21s,
kf22=\E[22s, kf23=\E[23s, kf24=\E24s, kf26=\E26s, krfr=\E[27s,
lines#24, mc4=\E[4i, mc5=\E[5i, rc=\E8,
rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs1=\Ec,
sc=\E7, sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[1m, smul=\E[4m,
xon, rmam=\E[11;1j, smam=\E[11;0j,
#
# The following Terminfo entry describes functions which are supported by
# the AT&T 5430/pt505 terminal software version 1.
#
# The following represents the screen layout along with the associated
# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
# not appear on the screen but are shown to reference the bezel buttons.
# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
# position relative to the screen.
#
#
#
# +----------------------------------------------------------------+
# | |
# XXXX | kf0 kf24 | XXXX
# | |
# | |
# XXXX | kf1 kf23 | XXXX
# | |
# | |
# XXXX | kf2 kf22 | XXXX
# | |
# | |
# XXXX | kf3 kf21 | XXXX
# | |
# | |
# XXXX | kf4 kf20 | XXXX
# | |
# | |
# XXXX | kf5 kf19 | XXXX
# | |
# | |
# XXXX | kf6 kf18 | XXXX
# | |
# | |
# XXXX | | XXXX
# | |
# | |
# +----------------------------------------------------------------+
#
# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
#
# Note: XXXX represents the screen buttons
# CMD REDRAW
#
# MAIL
#
# Depression of the "CMD" key sends \E! (kcmd)
# Depression of the "MAIL" key sends (note) (kf26)
# "REDRAW" same as "REFRESH" (krfr) (note)
#
# note: The character string sent by key 'kf26' may be user programmable
# to send either \E[16s, or \E[26s.
# The character string sent by key 'krfr' may be user programmable
# to send either \E[17s, or \E[27s.
#
# "kf" functions adds carriage return to output string if terminal is in
# 'new line' mode.
#
# The following are functions not covered in the table above:
#
# Set keyboard character (SKC):
#
# \EPn1;Pn2w
#
# Pn1= 0 Back Space key
# Pn1= 1 Break key
# Pn2= Program char (hex)
#
# Screen Definition (SDF):
#
# \E[Pn1;Pn2;Pn3;Pn4;Pn5t
#
# Pn1= Window number (1-39)
# Pn2-Pn5= Y;X;Y;X coordinates
#
# Screen Selection (SSL):
#
# \E[Pnu
#
# Pn= Window number
#
# Set Terminal Modes (SM):
#
# \E[Pnh
#
# Pn= 3 Graphics mode
# Pn= > Cursor blink
# Pn= < Enter new line mode
# Pn= = Enter reverse insert/replace mode
# Pn= ? Enter no scroll mode
#
# Reset Terminal Mode (RM):
#
# \E[Pnl
#
# Pn= 3 Exit graphics mode
# Pn= > Exit cursor blink
# Pn= < Exit new line mode
# Pn= = Exit reverse insert/replace mode
# Pn= ? Exit no scroll mode
#
# Screen Status Report (SSR):
#
# \E[Pnp
#
# Pn= 0 Request current window number
# Pn= 1 Request current window dimensions
#
# Device Status Report (DSR):
#
# \E[6n Request cursor position
#
# Call Status Report (CSR):
#
# \E[Pnv
#
# Pn= 0 Call failed
# Pn= 1 Call successful
#
# Transparent Button String (TBS):
#
# \E[Pn1;Pn2;Pn3;{string
#
# Pn1= Button number to be loaded
# Pn2= Character count of "string"
# Pn3= Key mode being loaded:
# 0= Unshifted
# 1= Shifted
# 2= Control
# String= Text string (15 chars max)
#
# Screen Number Report (SNR):
#
# \E[Pnp
#
# Pn= Screen number
#
# Screen Dimension Report (SDR):
#
# \E[Pn1;Pn2r
#
# Pn1= Number of rows available in window
# Pn2= Number of columns available in window
#
# Cursor Position Report (CPR):
#
# \E[Pn1;Pn2R
#
# Pn1= "Y" Position of cousor
# Pn2= "X" Position of cursor
#
# Request Answer Back (RAB):
#
# \E[c
#
# Answer Back Response (ABR):
#
# \E[?;0;30;VSV
#
# V= Software version number
# SV= Software sub version number
#
# Screen Alingment Aid:
#
# \En
#
# Bell (lower pitch):
#
# \E[x
#
# Dial Phone Number:
#
# \EPdstring\
#
# string= Phone number to be dialed
#
# Set Phone Labels:
#
# \EPpstring\
#
# string= Label for phone buttons
#
# Set Clock:
#
# \EPchour;minute;second\
#
# Position Clock:
#
# \EPsY;X\
#
# Y= "Y" coordinate
# X= "X" coordinate
#
# Delete Clock:
#
# \Epr\
#
# Programming The Function Buttons:
#
# \EPfPn;string\
#
# Pn= Button number (00-06, 18-24)
# (kf00-kf06, kf18-kf24)
#
# string= Text to sent on button depression
#
#
#
# 05-Aug-86
#
#
505-24|pt505-24|5430-24|gs5430-24| AT&T PT505 or 5430 GETSET version 1 24 lines @(#)pt505v1.ti 1.2,
am, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cnorm=\E[>l,
cols#80, cr=\r, cub1=\E[D, cub=\E[%p1%dD, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
el=\E[0K, el1=\E2K, home=\E[H, ht=\t, il=\E[%p1%dL, il1=\E[L, ind=\n,
is1=\EPr\\E[0u\E[2J\E[0;0H\E[0m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
it#8, kbs=\b, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf0=\E[00s, kf1=\E[01s, kf2=\E[02s, kf3=\E[03s, kf4=\E[04s, kf5=\E[05s,
kf6=\E[06s, kf18=\E[18s, kf19=\E[19s, kf20=\E[20s, kf21=\E[21s,
kf22=\E[22s, kf23=\E[23s, kf24=\E24s, kf26=\E26s, krfr=\E[27s,
lines#24,
rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs1=\Ec,
sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[1m, smul=\E[4m,
xon,
505-22|pt505-22|5430-22|gs5430-22| AT&T PT505 or 5430 GETSET version 1 22 lines @(#)pt505v1.ti 1.2,
lines#22, use=5430-24,
# Reconstructed via infocmp from file: /usr/lib/terminfo/7/705
705c|ATT705C|att705c|4000awtc|AT&T 705 Color 24x80 column display w/102key keyboard @(#)705.ti 1.3,
am, da, db, eslok, hs, mir, msgr, xenl, xon,
colors#8, cols#80, lh#2, lines#24, lm#0, lw#8,
pairs#64, nlab#8, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[36m, cbt=\E[Z,
civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l,
cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[34m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
fsl=\E8, home=\E[H, ht=\t, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m^O,
is3=\E(B\E)0, kLFT=\E[\sA, kRIT=\E[\s@, kbs=\b,
kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, mc0=\E[i,
mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
op=\E[37;40m,
pfx=\E[%p1%d;%p2%l%02d;0;4q%p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|,
s0ds=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%{7}%>%t9%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%{7}%>%t9%e%p1%d%;m,
sgr=\E[0%?%p6%t;36%;%?%p5%t;34%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
sgr0=\E[m^O, smacs=^N, smir=\E[4h, smln=\E[p,
smso=\E[7m, smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
tsl=\E7\E[99;%i%p1%dx,
#
# xterm: terminal emulator for XWIN system.
#
xtermm|xterm terminal emulator (monocrome) @(#)xterm.ti 1.3,
am, km, mir, msgr, xenl,
cols#80, it#8, lines#24, btns#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
home=\E[H, ht=\t, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=\n, ka1=\EOq, ka3=\EOs,
kb2=\EOr, kbs=\b, kc1=\EOp, kc3=\EOn, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM,
kend=\E[Y, khome=\E[H, knp=\E[U, kpp=\E[V,
kf0=\EOy, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
kf7=\EOV, kf8=\EOW, kf9=\EOX, rc=\E8,
rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8,
rmso=\E[m, rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;,
sgr0=\E[m^O, smacs=^N, smcup=\E7\E[?47h,
smso=\E[7m, tbc=\E[3g,
getm=\E[%p1%dY, kmous=\E[^_, reqmp=\E[492Z,
smkx=\E[?1h\E=, rmkx=\E[?1l\E>,
#
# color xterm
#
xtermc|xterm-color|xterm terminal emulator (color) @(#)xterm.ti 1.3,
colors#8, ncv#7, pairs#64,
op=\E[100m,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4
%e%p1%{3}%=%t6
%e%p1%{4}%=%t1
%e%p1%{6}%=%t3
%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4
%e%p1%{3}%=%t6
%e%p1%{4}%=%t1
%e%p1%{6}%=%t3
%e%p1%d%;m,
use=xtermm,